How to use enterprise service (sap esoa)

After some basic acknowledge of SAP ESOA, I have the following puzzles need to be clarified:
1, Whatu2019s the relation of ES with the traditional functions? For example, there are standard ES for sales order processing, ATP check, etc. Can we use traditional function (i.e., t-code: VA01), while using the enterprise service or service operation to do the ATP check, and in SAP GUI environment?
2, How to activate or use a service? It that a must or prerequisite to install enhancement package? What is the least SAP ERP version required, ECC or ECC6.0?
3, As to the vision, can we say the traditional way of SAP module function will as a whole be replaced by enterprise service?
4, Traditionally, we have IMG to configure the sales order type and properties of that. For enterprise service, where can we do the same?
The questions above may be somewhat funny, but really confused me a lot. Please kindly help. Thanks.

have u installed discovery system ..
it will start by itself in a browser ..
it has browser based and gui based and ides based...
it depend how u start

Similar Messages

How i use Enterprise Services?

Hello @ll experts,
i hope that is the right Forum-Category.
I don't find any description, how is use Enterprise Services with SAP PI for my IT-Scenario.
Actual situation:
I import the XI-Content (there is the Service Interface to use for the ES) in the Enterprise Service Repository (SAP PI 7.1), copied the Service Interfaces and all dependence Objects in my own Software-Compoment.
My Question:
What i should doing to config in my sap ERP ECC 6.0 with the Enterprise Service to connect with SAP PI 7.1?
Maybe ABAP-Proxies?
Thanks in Advance,
best regards
armin

Hello,
Once you build Service Interface in PI, you need to generate PROXY in back end ERP system using SPROXY. After that you need to implement the Proxy Class Method by writing glue code using SE80. Now, you may setup End Point using SOAMANAGER. Please see the link for details: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60cb2b4c-af72-2b10-a3a2-a2f718d2a565]
Thanks,
Venu

How to use Enterprises Services Bundles In PI Services Registry

Hi All,
i need information regarding How to use Enterprises Services Bundles In PI Services Registry.
please provide some information. please help me..
regards,
jas
Edited by: jasmines123456789 on Nov 10, 2009 2:42 PM

Hi,
Enterprise Services (ES) bundles are collections of enterprise services, grouped by common business scenarios, which enable customers, partners and independent software developers to extend the functionality of the SAP Business Suite.ES bundles help create composite applications using SAP NetWeaver's enterprise services development and modeling tools. In this way, SAP is promoting an evolutionary path to SOA and lowering barriers to overall SOA adoption.
SAP providing bundles of enterprises for evry industry,if you want to use any enterprise services then you have to read teh documentation for the servcies and how this service can help you to reuse,if you want to provided any extension for the same you can.
All enterprise services stored in Service Registry,first you have to consume the services fromService Regsitry.Service Registry is the place holders where servies available.
refer below link how to use Enterprise Service BundleS
https://wiki.sdn.sap.com/wiki/display/ESpackages/Opportunity+Management
Regards,
Raj

How to use Enterprise Services without ESR.

Hello,
We use SAP ERP6.0.
We would like to use SAP Enterprise Services as a evaluation by .NET application.
We do not have SAP NetWeaver PI and CE now.
Without ESR (PI and CE) , how do I configure ERP 6.0 to use Enterprise Services?
Please let me know.
Best regards,
Koji Nagai

Hi,
ESR is not compulsory for just consuming service.
First you need to activate and configure webservice.
Step1: Goto transaction SICF and activate service you want to evaluate. You can find ES under path: /default_host/sap/bc/srt/xip/sap/
Step 2:Goto transaction: SOAMANAGER and under tab: Application and Scenario communication chose single service administration. Now search for "Service" pattern: service name you selected and activated in SICF field = Internal name. then go.
Step 3: you will be able to see your service here, now select service and click on apply selection.
Step 4: Under the "configuration" tab select "Create service" button. Give any name to "New Service Name" type some description and finally give any name to "New Service Name" and apply setting.
Step 5: Select authentication type http and save,
Now under tab "Overview" you can see some url for "Open WSDL document for selected binding" use this url in your .Net application.
Regards,
Gourav
Ps: I always have ESR and all necessary configuration so don't know if required settings available in your system to work this scenario.

How to use Enterprise Services available in workplace

Hello Friends,
We have found some Enterprise Services to use for our existed business scenarios in ES Workplace.
My requirement here is: There are some interfaces which are running through websphere from source to destination. Now, we wanted to migrate those interfaces using PI 7.1, for which Can I use SAP provided Enterprise Services in ES Workplace? If so, how can I use those? What is the approach? Is there any process for this?
Kindly provide us blogs, pdfs or step by step procedure how to use?
Regards
PM.

Hello PM,
It depends on the exact scenario and best fit of usage of ESs. The ESs listed out in the ES workplace are the different functionalities and specific to business scnearios.
So in your case, it is not a good idea to directly use the services available from ES workplace. You need to understand/analyse the exact functionalities etc
wrt your query on how to use ES from ESworkplace: All ESs are coming as EhPs.. so you need to import those EhPs in your SAP backend, and publish the services into ES Registry.. then you can consume without PI.
You can use PI, to have new developments or extending the existing ES using outside in approach. Otherwise PI is not required to execute the ES.
Following URLs will help you to understand these better
Simple use cases :
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?sap-unique=045503&sap-params=aWQ9RjZDRkMwRUEzRUYxNEJDOTg0MUM1MjgyNzJFRTg1ODMmcGFja2FnZWlkPURFMDQyNkREOUIwMjQ5RjE5NTE1MDAxQTY0RDNGNDYyJm1vZGU9
ES configuration: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20b723f8-a422-2c10-aca5-fe64eeda1ff2
Specific to using PI or migrating to PI, need to have more details to respond. Because we can not just replace with ES..
Hope it helps
Regards, Moorthy

Using Enterprise Services Bundles in PI

Hi ALL,
need help in how to use Enterprise Services Bundles in PI.
if someone worked on this pls give me some idea about this and methods to use this ..
if there is any best practice in using this Enterprise Services Bundles ..and i find in some document stating we need to download it from Service Marketplace and import the same into their Enterprise Services repository. can you pls tell me under which segment i can download this ..
thanks
Souz

The SDN home page has good info on ESBundles
http://www.sdn.sap.com/irj/sdn/explore-es
Download contnet from SErvic emarketplace
https://websmp205.sap-ag.de/swdc
Support Packages and Patches - Entry by Application Group" SAP Content - ESR Content (XI Content)
Regards,
Siva Maranani

Is it possible to use Enterprise Service in PI 7.0?

Hi....
I just wonder that is possible to use enterprise service in PI 7.0.
In PI 7.0, there is no ESR.
Thank you.

Hi,
      I suppose you can publish you PI interfaces as a web services on the UDDI repository of SAP WAS or any other third party UDDI system ;
      Als it is possible to expose FM as a web services on SAP UDDI repository which then can be invoked / consume by the PI .
     Yes but complete features of ESR can not be achieved here.
Regards,
Ganesh.

How to use Web services in BI 7?

HI all,
Can anyone pls let me know how to use Web services in BI
Thanks
Pooja

http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d029e74911d6b2e400508b6b8a93/content.htm

Using Enterprise service for POS integration to POSDM

Hi
I have few question on using Enterprise Service for POS Inbound .
1. Is it possibe to get this XML schema for Enterprise Service
2. Lets say we have to use a third party POS to integarte POSDM via PI. But then if we don't want to do any transformation in SAP PI, then can we use the following option:
SAP POS sends the data in the ES XML format
SAP PI just transports this to POSDM
I do see some drawbacks of POS sending the data in the ES service format. As this means, if any change needs to be done based on any new requirements, we need to change the source code. However the above option should still be technically possible?
Any reference if the above approach had been used in any projects. We have always used the following flow:
POS--> PI---> POSDM . PI to POSDM is through the RFC /POSDW/CREATE_TRANSACTIONS_EXT.
Regards,
Fazila

Hi Fazila,
The ES bundle "PointOfSaleTransactionERPBulkCreateRequest_In" can be used to transfer POS transactions to POS Data Management directly.
In order to access the above-mentioned ES, please use the Integration Builder in your PI system in transaction SXMB_IFR and follow the link to the Integration Repository.
This structure can be enhanced to capture additional information.
Award point if useful.
Regards,
Ramki

POS Integration-POSDM, ERP, PI - using enterprise services-Connectivity Kit

Hello,
below you find a link to the official Connectivity Kit for Integration Scenario: POS Integration.
The integration scenario POS Integration is based on SAP ERP and SAP NetWeaver BI /SAP POS Data Management using enterprise services.
You will find an implementation Guide as well as descriptions of the enterprise services used.
https://wiki.sdn.sap.com/wiki/x/1ACFAQ
Best Regards,
Markus

Hi, Markus,
thank your for your input! very interesting!
I'm wondering which benefits this POS Integration over Enterprise Services has, comparing with the conventional IDoc transfer?
Regards
Rene

How to use web service consumer as a source to connect to Salesforce?

I see a lot of articles and mapping xmls on how to use web service consumer but as a newbie I am not able to view the object schema from my salesforce enterprise WSDL after importing it in Informatica designer as a source. My enterprise wsdl has operations like create, retrieve, upsert, delete etc so if I want to read data from account then could someone guide me on how to use the web service consumer to view the fields after importing the wsdl. After importing the wsdl and selecting the operation say create, the columns (ports) displayed shows different groups but it doesn't list the object fields? what am I missing here? And what is the operation to read data from Salesforce is it "retrieve" from the entripse wsdl? As a newbie on this, I appreciate any inputs on this topic.

Magazinweg 7Taucherstraße 10Taucherstraße 10Av. Copacabana, 267Strada Provinciale 124Fauntleroy CircusAv. dos Lusíadas, 23Rua da Panificadora, 12Av. Inês de Castro, 414Avda. Azteca 123 I have the source table like this and i want to replace the character and sum up the numbers and how can i do it, I replace the character by reg_replace() function but I am not able to add the number because it is of not fixed length. My Output should be,71115705396

Use Enterprise Services without service registry?

Hello experts,
this question is following me since days: is it possible to use enterprise services from an erp-system without a service registry?
From my understanding the service registry at runtime determines the endpoint where the service is implemented. But when there is just a single erp-system is it then possible to use this services without any additional systems?
Thanks for any answer.
Regards,
Norbert

Yes you can.
The service registry is just a "phone book" of services. as much as phone numbers exist well without the phone book services exist without a registry.
actually, if you really ever have only one source system for enterprise (or other) services you don't need the service registry. even if you have 3 source systems and you know how to find an overview of the services in each of those 3 systems and if you don't use a 'global' data model you do not really need the service registry.
but this is just my 2 cents. 'publishing' seems to be a common source of joy these days
anton

How to use web services in Excelsius 2008

I am new to this tool. I have trial version on excelsius 2008 and i would like to build a dashboard that should query our corporate database (in oracle). I think web services is a option to do it. Any samples available?.Please help me
Edited by: AshishDatar on Jul 27, 2009 6:29 PM

Hi AshishDatar:
For you question you want to get data from data base using web service connection. Here I can give you some suggestions
1.Write a web service to retrieve data from data base, then use Xcelsius u201Cweb service connectionu201D under u201CManage Connectionu201D section to consume the service and get the data from data base to spread sheet.
2.Xcelsius also provide you a tool to generate web service with easy way (without coding). (Suggested)
Using flynet, you can get flynet installation file under Xcelsius installation folder u201CXcelsius\Connectivity\Flynet Webservice Generatoru201D for more information about flynet please refer to
http://myxcelsius.com/2008/11/07/generating-web-services-for-xcelsius-using-flynet-web-service-generator/
Here is also a demo on how to use web service conneciton with Xcelsius + Flynet
https://businessobjects.webex.com/ec0600l/eventcenter/enroll/register.do?siteurl=businessobjects&formId=50213992&confId=50213992&formType=1&loadFlag=1&eventType=1&accessType=
Hope it helps with your work! And let me know if you need any further help.
Thanks!
Bill
Edited by: Bill Xu on Jul 28, 2009 8:02 AM

E2Open interfaces built using enterprise services

We need to build purchase orders related interfaces with E2Open and discussing on using IDOC vs ESOA services that were provided by SAP with Ehp4. We need to extend these services to get our custom data and using IDOCs would save time. There is web methods/software AG server (middleware) that will translate SAP structure into OAG structures.
Any suggestions/pros & cons on IDOC vs ESOA?

Hi Rajani,
My personal opinion:
I think that you need to think more long term, using IDOCs would save you time now but significantly reduces your flexibility. You should also factor into consideration business goals & strategy (where the company is headed towards).
If you have an ESR (Enterprise Service Repository) in your landscape (it comes shipped with SAP Netweaver CE or SAP PI), there's nothing stopping you from extending the standard SAP Enterprise Services to cater for your custom data. If you don't, an option would be to create custom Abap programs that wrap the enterprise service functionality & cater for your custom data. You could then web service enable those custom programs.
I'm personally not a big fan of IDOCs because I think that they are too cumbersome to use but they also work well. You need to ask yourself, some questions like:
- What if a business process changes, what would the impact be if you choose IDOCs over enterprise services?
- What if you at some stage need to orchestrate provisioning interfaces to cater for changing business / market / regulatory conditions?
- How much is SAP investing in Enterprise Services vs IDOCs?
- How agile is the approach of using IDOCs vs Enterprise Services?
- Does using IDOCs give you an egde over competitors & if there is a business opportunity that needs to be capitalized on, how quickly can you adapt the IDOC scenarios to take advantage of it?
- What about skill levels (developers etc.) for IDOCs & Enterprise services?
- Budget constraints?
These are just some questions...
On the whole, I think that Enterprise Services would work better but it depends on your specific circumstances & SAP is investing significantly more on Enterprise Servies than IDOCs so you would get that added benefit.
Regards, Trevor

How to use web service in ECC 6.0

Hi.
I found some WSDL in "SDN ES Workplace".
Anybody know how to use this WSDL ?
For example, I want to use 'Query Sales Order' web service and I found WSDL in "SDN ES Workplace".
What's next step to use this web service ?
Regards, Arnold.

Hi Austin,
Link provided for mySAP ERP Enterprise Service Package ECC-SE 600, does not work. My company is SAP customer and I am SDN member.
Do I need some special login or membership to download ES packages?
I also understand that I can access the Enterprise Service from the ES Workplace (implementation) and for that I have to Apply For an Account. I applied for an account at this link https://www.sdn.sap.com/irj/sdn/esareg .
After applying for an Account should be getting an email with user Id/password OR I can use the my Service Market Place ID?
Tried entering the my service market place Id, does not work.
Thanks,
Abhay

How to use enterprise service (sap esoa)

Similar Messages

Maybe you are looking for