How to use EXPDP to create the dumpfile in shared network drive.

Hi,
I have Oracle 11g ( 11.2.0.3 ) DB server in SUSE Linux machine.
I want to export a schema of 300 GB size using EXPDP utility. Thing is I dont have enough space to hold the EXPDP dumpfile in the same server.
Hence I would like to know is there any way where I can create the dumpfile on to some other mapped drive from the Linux server.
This is quite urgent, please some one help me.
Regards
Suresh

Hi Suresh,
It it's windows you want to map to linux take a look at samba to do that:
http://www.linux-noob.com/forums/index.php?/topic/1404-how-to-mount-a-windows-share-with-smbmount/
I've not actually exported directly to a samba mount but i assume it will work......
the other alternative (if you have an 11.2.0.3 db on the windows server also) is to use this approach
http://dbaharrison.blogspot.de/2013/05/expdp-creating-file-on-my-local-machine.html
Cheers,
Harry

Similar Messages

External 'shared' drive (WD MyBookWorld) - IP address has changed and I cannot access it, or delete the old definition and re-enter it. How do I delete or edit the definition of 'Shared' computers/drives?

I have for some time used a WD MyBookWorld external hard drive and 'connected' TimeMachine to it. This process created two 'Shared' computers visible in Finder. MyBookWorld and MyBookWorld-Backup. Time Machine connected to the one called MyBookWorld-Backup.
However, then the MyBookWorld acquired a new IP address (long story, it wasn't static). Time Machine stopped working - didn't give any useful prompts by the way, noticed by accident that it hadn't backed up for a month.
So, ideally I would just like the definition of MyBookWorld 'shared' computer/drive to be updated with the new IP address. However, I can't find out how to do this.
- I can't delete or modify the entries via Finder (or anywhere else) of the 'Shared' computers/drives.
- I CAN connect to the WD MyBookWorld via Finder/Go/Connect to Server and see the file hierarchy that Windows machines are using in their backups .
- Time Machine ONLY sees the existing MyBookWorld on MyBookWorld-Backup definition, but this fails to connect - error says that the devices doesn't exist or has an incorrect IP address.
So I'm stuck. Any one help? I can't help feeling that I'm missing something obvious.
Thanks in advance.

Well, I'm not quite sure how the communities work in AppleLand. I've had no reply from the community or from Apple. I've not experienced this level of disinterest on any other support site. Maybe my question was too boring....
As it happens, although I haven't resolved the problem as described, I've got Time Machine working again. I don't exactly know how, but I updated the firmware on the MyBookWorld to the latest, and stopped using the AirPort wireless and switched to a wired connection. Time Machine seemed to be able to find the external disk and recommence its backup regime.
If anyone cares to answer my original question that would be great. Google shows many sites with posts asking similar questions, but without any sensible, correct, user oriented answers.

How do use Time Machine to back up to my network drive?

I have been dealing with this issue for days. When I had bought my MacBook Pro a couple of weeks ago I figured Id try and back it up to my 1.5tb Western Digital HD that's plugged into the USB port on my router. I Have connected to it through finder and can access it fine however my main point in getting to it is to back up my MacBook with Time Machine over the air to the external HD. I have researched and tried many tricks such as running codes in finder to create a "sparsebundle" using the code " hdiutil create -size 100g -fs HFS+J -volname "Time Machine" COMPUTERNAME_XXXXXXXXXXXX.sparsebundle " in Terminal. I was able to succeed in creating one but my problem comes when I want to transfer it to the network drive. I use the code " rsync -aE COMPUTERNAME_XXXXXXXXXXXX.sparsebundle /Volumes/NETWORKDRIVE/ ". However I get error codes such as "file could not be transferred (23)" and "no file or directory (2)". Also before I did all of these steps I made sure to make network drives discoverable in Time Machine by running the code " defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1 " in Terminal. However without using the trick that I keep getting errors with Time Machine gets error message 45 when attempting to back up to the Network Drive straight after making the Drive discoverable. I know Apple niched Time Machine back ups on network drives after or toward the end of Leopard and thats why it is so hard to do it now but I was hoping someone can aid me in my never ending problem?

Hi Barney
What format is the drive on the router? It has to be HFS+ (Extended, journaled).
Sorry Barney, that's not correct in this context. The user must create an HFS+ sparse bundle and then upload it to the network drive. The network drive will be formatted as its formatted.
I also believe it has to be an Apple Airport Extreme router.
Again, that is not the case. I am successfully using Time Machine to an Iomega network drive for the last 12 months. No issues at all.
However, you are making your backup completely unreliable.
There may be an element of truth to this, however, I have used the "Star Wars" interface to recover individual files directly. If I should need to perform a larger recovery and for some reason I can't get the usual access through Apple software, I have established that I can directly access the sparse bundle on the drive and mount it on the computer. Once there, I can just copy files directly from it. The sparse bundle folder structure makes it easy to get the latest version of every file with a couple of mouse drags. This means that I will always be able to get access to my backups.
Apple nixed it because they couldn't get it to work reliably. I imagine they only support that sort of thing on their own Time Capsule because they can control the wireless transmission and error checking (and they sold TCs specifically for that purpose).
I don't know why Apple nixed it - I've had zero problems with this configuration and it is by far the most sensible way to use Time Machine. It seems completely pointless to have a portable MacBook and then have to physically connect a drive to it permanently for backup purposes.
I've only had personal experience with the Iomega drive - maybe it only works with a limited number of manufacturers?
Bob
Message was edited by: Bob Lang1

I was wondering how to use Dreamweaver to create joomla template? Any ideas or useful resources.

I am embarking on a new project to create a joomla template. I need your ideas on how to use Dreamweaver to create the template. TQ

It's pretty much the same procedure with all your open source CMSs (WordPress, Drupal, Joomla!...)
Start with this 4 Part Tutorial:
http://www.adobe.com/devnet/dreamweaver/articles/dw_wordpress_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to use PS to judge the existence of a folder in the specified directory and how to use PS in the specified directory to create to create the folder?(javascript)

1,How to use PS to judge the existence of a folder in the specified directory?(use javascript)
2, how to use PS in the specified directory to create to create the folder?(use javascript)
Thanks you!

Thanks you!

Any one knows how to use Axis Framework in the SOAP Adapter Modules

How to use Axis Framework in the SOAP Adapter?
How to add custom handler modules?
http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/frameset.htm
I went through the above link on help.sap.com. But still could not create a working example.
I have created a wc on some 3ed party app server using apaches axis. I am trying to call that web service from XI using SOAP receiver? I need to add some security related headers to the soap message, SO I am trying to use a handler. I want to know how to configure this handler in SOAP axis adapter module.
Thank you
Moni

Ravi ,
I am trying exactly the same. Hers is the scenario.
ABAP Proxy --> PI (7.0) SP 12 ---> WebService.
Since This is service is secured, means it is using OASIS web servie securyty user name token,
I am trying to use AXIS adapter. and I want to configure HandlerBean in which I want to use apache wss4j api to add the userNameToken. I am looking for some documentation on this.
I need to add SOAP action element too as I can not configure this one on the communication channel.
Thanks for any inputs in this regard.
Moni

How to use bind variables in the following query

CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;

Don't duplicate threads: How to use bind variables in the following query

How to use multi queries inside the RTF file

Hi all,
I develope a data source in report developer 10g, and use it to create the RTF files... I have some files wich contains more than 1 query. how can I refer to the fileds in the other queries in side the RTF file, because it's bring the filed from the first query by default??
ThanX in advance

ThankX DD
But that wont work for my case. the problem that I have actually is in RTF.
for example:
I have 3 qeuries. A,B & C. A: contains the employee data. B: his Earnings and C: his Deductions.
in the RTF file it shows me only A contents. wich means it's not entring B & C loops, notice I add <?for-each:B_GROUP_NAME?> and same for C also.
all my other reports wich have single qeury worked fine.
Regards to all,
Message was edited by:
Adam Ali

How to use SNRO to create daily number range?

Dear all,
I would like to know how to use SNRO to create a daily number range.
We would like to have the following sequence. The first 8 digits are date and the last 2 digits are number sequence. Each day, the last 2 digits will start from 01 again. i.e. <8-digits date><2-digit sequence>
For example, today is 22 May 2006,
2006052201
2006052202
2006052203
Tomorrow will have sequence like this:
2006052301
2006052302
2006052303
Thanks!

Thomas,
I don't there is a automated way of doing as the dates do NOT follow a numbering sequence. What you can do is to create a number range for getting the last two digits every day and manually concatenate the date with the serial number.
However, as you have to reset the counter every day that might be a issue.
Regards,
Ravi

How to use glob search with the wildcard in command find?

How to use glob search with the wildcard in command find?
I want to find any file its names begin with "readme" string using command find. Why the following command cannot work?
$find /usr/share/doc -name readme*
However, the following commands can work?
$find /usr/share/doc -name readme\* or
$find /usr/share/doc -name readme'*'
I want to know: After using the “\” or ' ', why the wildcard do not become a character "*"?(still a metacharacter).
Another question:
I want to find any file its names begin with "readme*" string using the command find.What command should I use?

I want to know: After using the “\” or ' ', why the
wildcard do not become a character "*"?(still a
metacharacter). The backslash is known as an escape character. It means 'use the character value of the next character, not the special meaning' It is used in a lot of places such as command line, global regular expression patterns, and editors such as vi.
In a typical shell, the splat (*) expands to all file names before passing the file names to the current command. So a \* sequence tells the shell to pass a *, not a list of file names, to the command.
Demo - OpenSuSE Linux 10.3
- I have a bunch of files. Let's list those that end in grid. Create one called *grid, and list again
pops@fuzzyVM:~/pops> ls
a b c startgrid stopgrid
pops@fuzzyVM:~> ls *grid
startgrid stopgrid
pops@fuzzyVM:~> ls \*grid
ls: cannot access *grid: No such file or directory
pops@fuzzyVM:~> touch '*grid'
pops@fuzzyVM:~/pops> ls
a b c *grid startgrid stopgrid
pops@fuzzyVM:~/pops> ls *grid
*grid startgrid stopgrid
pops@fuzzyVM:~/pops> ls \*grid
*grid
pops@fuzzyVM:~/pops>In the above, how would I remove the file *grid, and only that file?
Another question:
I want to find any file its names begin with
"readme*" string using the command find.What command
should I use?What were the results of the two versions you tried? And why?

How to use CSS to create horizontal nav bar in Dreamweaver CS6

How to use CSS to create horizontal nav bar in Dreamweaver CS6

One of the ways to do it is this: Tryit Editor v1.9
You can also use floats to get something to the same effect.

I have deploy an EJB in weblogic 6.1,but how to use jsp to invoke the EJB's method?

i have deploy an EJB in weblogic 6.1,but how to use jsp to invoke the EJB's method?
thanks!

You'd do something like:
<%
//vvv this part can potentially be done in initialization
Context ctx = getInitialContext();
BeanHome home =
(BeanHome)PortableRemoteObject.narrow(ctx.lookup("the.jndi.name"),
BeanHome.class);
Bean b = home.create();
//^^^
Result r = b.invokeMethod();
%>
"toxin" <[email protected]> wrote in message
news:3d2e95e5$[email protected]..
>
i have deploy an EJB in weblogic 6.1,but how to use jsp to invoke theEJB's method?
thanks!

How to used apple ID in the iTunes store?

how to used apple ID in the iTunes store?always the problem was this " This apple ID has not yet been used in the iTunes store?

Why can’t I select None when I edit my payment information?
also you can
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/

How to use SQL functions in the queries

hey guys i wanna know how to use SQL functions in the queries is it possible or not .

Hi,
Wat exactly that set values are?
those from sql query?
How to use count():
The COUNT() function returns the number of rows that matches a specified criteria.
SQL COUNT(column_name) Syntax
The COUNT(column_name) function returns the number of values (NULL values will not be counted) of the specified column:
SELECT COUNT(column_name) FROM table_name
SQL COUNT(*) Syntax
The COUNT(*) function returns the number of records in a table:
SELECT COUNT(*) FROM table_name
SQL COUNT(DISTINCT column_name) Syntax
The COUNT(DISTINCT column_name) function returns the number of distinct values of the specified column:
SELECT COUNT(DISTINCT column_name) FROM table_name
The IN function helps reduce the need to use multiple OR conditions.
The syntax for the IN function is:
SELECT columns
FROM tables
WHERE column1 in (value1, value2, .... value_n);

[Forum FAQ] How to use parameter to control the Expand/Collapse drill-down options in SSRS report?

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

How to use EXPDP to create the dumpfile in shared network drive.

Similar Messages

Maybe you are looking for