How to use expression fucntion at deadines for task in time constraints Tab

Hi all,
The Human Task should have a start deadline by which the Task has to be started. Or otherwise some other Task will run. I did this with a boundary Event StartDeadlineIsCriticalExeption and an offset for the start deadline at the task.
but this is a fixed value now i want to modify that with expression function .
Edited by: Vikramshirole29 on Sep 20, 2010 1:20 PM

Hi
We can use a dateTime value to set completion deadline dynamically. I guess we can do the same for start deadline also.
I am using the dateTime(String val) inbuilt function for this.
Regards
Vidyadhar

Similar Messages

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • How to use the same email address for outgoing email on two iPads?

    How to use the same email address for outgoing email on two iPads?.   My wife and I both use the same email address.  We receive the same incoming email on both iPads but are unable to send email from my wife's iPad.  She is using an iPad 2 and is usng IOS 6.0.1

    Hi Creaturekeeper,
    If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Take care,
    Alex H.

  • How to use the field of 'FM for Determining Address' in report RSWUWFML2?

    Dear gurus,
    In the selection screen of report RSWUWFML2, there is a field named 'FM for Determining Address' . How to use it? Is it for sending e-mail to specific e-mail addresses?
    Regards
    David

    I will test soon. Thanks to all involved.

  • WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?

    WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
    I have installed KB2734608, but when I search MS13-101 , no patch for Win 2012.
    Can you help me resolve this problem ?
    Thanks

    On Thu, 10 Apr 2014 06:01:48 +0000, fujitsu08 wrote:
    WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
    WSUS has its own, dedicated forum where the WSUS experts answer questions.
    You should repost your question here:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
    Paul Adare - FIM CM MVP
    Aibohphobia: n. Fear of Palindromes

  • How to use find my iPhone app for windows pc

    How to use find my iPhone app for windows pc ... Is it possible to do..
    Or what is the closest app to do that.,,,,,

    iPhone User Guide (For iOS 5.0 Software)
    iCloud: Find My iPhone
    iCloud: Find My iPhone overview
    iCloud: Set up Find My iPhone

  • How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field

    How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field
    eg:
    I have a inner table ,it contains a field named ast_guid,now,I search ten records,contains some duplicate records in the field of ast_guid.but I can not delete the duplicate records as ast_guid.

    If the type of  inner table is standard table,  you should sort the inner table  by the fields before user 'DELETE ADJACENT DUPLICATES  ', and use COMPARING addtion.
    Edited by: Justin on Jun 28, 2009 9:48 AM

  • SMP3 - AppDevelopment (Agentry):how to use GCM (Google cloud Messaging) for Agentry Application.

    Hi, I have a question on SMP3 and AppDevelopment (Agentry): how to use GCM (Google cloud Messaging) for Agentry Application for PUSH notification

    Pratik,
    Let me walk you through the flow with the assumption that the user is on an Android device and "connected" to the Agentry server.
    An emergency workorder is created in SAP and assigned to the technician. 
    The SAP backend system will notify the Agentry server via an XML message that there is a workorder to send.
    Agentry will get the details and if the user is connected attempt to send the workorder to the device via the Push mechanism
    If the push fails to reach the Agentry client, the Agentry server will send a GCM message to the user
    When the user returns to the Agentry client, the normal push processing / fetch will occur to receive the workorder from the server assuming the push retrys are in effect.
    So, essentially you should not have to do anything to get the GCM to work as a secondary notification mechanism.
    If you are looking to do something else with GCM that would be outside of Agentry.
    --Bill

  • How to use one commandButton  to execute two task in JSF

    I have a form in JSF page which contains different faces components. These faces bind to ADF BC to insert one row in the database when the user press commandButton. Also I need to bind the value of one inputText in that form to managed bean to execute another task in the application when the user press the same commandButton.
    The code of the inputText:
    <h:inputText value="#{bindings.ProjectNumber.inputValue}"
    id="pn"
    size="10"
    required="#{bindings.ProjectNumber.mandatory}">
    The code of commandButton:
    <h:commandButton actionListener="#{bindings.Commit.execute}"
    value="Save"
    disabled="#{bindings.Commit.actionEnabled}"/>
    The managed bean is “findInspector”. I tried to insert inputHidden inside commandButton tag and assign the value of the inputText to the inputHidden as follows:
    <h:commandButton actionListener="#{bindings.Commit.execute}"
    value="Save"
    disabled="#{bindings.Commit.actionEnabled}">
    <h:inputHidden value="#{bindings.ProjectNumber.inputValue}" binding="#{findInspector.project}"/>
    </h:commandButton>
    But it was not work
    Please how can I write the code to use the value of the inputText more than one time in the JSF(one to insert one row by using ADF BC and another to use the same value to bind to a managed bean) and how to use one commandButton to execute two task in JSF.
    Thank you
    Waheed

    Yes I did
    <managed-bean>
    <description>The bean for get project No</description>
    <managed-bean-name>projectBean</managed-bean-name>
    <managed-bean-class>
    mcscm.model.ProjectBean
    </managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
    <managed-property>
    <property-name>bindings</property-name>
    <value>#{bindings}</value>
    </managed-property>
    </managed-bean>
    Also I changed the method in the managed bean as follows:
    public String commandButton_action() {
    FacesContext fctx = FacesContext.getCurrentInstance();
    ValueBinding vb = fctx.getApplication().createValueBinding("#{bindings}");
    DCBindingContainer dcb = (DCBindingContainer) vb.getValue(fctx);
    OperationBinding operation = (OperationBinding) dcb.get("projectNumber");
    operation.execute();
    return null;
    where projectNumber is my method in the java class of the application module "TaskInformationImpl". I made this method to be accessed from outside of ADF BC.
    I just create a sample code for projectNumber method for testing only as:
    public void projectNumber (String data){
    System.out.print(data);
    In the page Pagedef file I added this :
    <methodAction id="projectNumber"
    InstanceName="TaskInformationDataControl.dataProvider"
    DataControl="TaskInformationDataControl"
    MethodName="projectNumber" RequiresUpdateModel="true"
    Action="999" IsViewObjectMethod="false">
    <NamedData NDName="data" NDValue = "#{bindings.ProjectNumber.inputValue}" NDType="java.lang.String"/>
    After I did all of this I get a new error like:
    javax.faces.FacesException: #{projectBean.commandButton_action}: javax.faces.el.EvaluationException: java.lang.ClassCastException: oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding cannot be cast to oracle.adf.model.OperationBinding
    Is it very difficult to do this in JDeveloper?. yes ADF BC provide me a lot of facilities, but when I want to do a specific task I face a lot of troubles

  • How to find a Transport Request no for Task or Workflow Template

    Hi All,
    Any body tell me.
    How to find a Transport Request No for Task or Workflow Template.
    Thanks,
    Lakhshmi.

    Hi.
    Next to the options already mentioned you can also try transaction SE03.
    Select: Search for objects in Requests/Tasks.
    Next, fill an empty line with the objectnumber you want to search (don't forget the checkbox).
    For workflow tasks use the object type PDTS, for workflow templates use PDWS.
    Kind regards,
    Jasper Blok

  • How to use one commandButton to execute two tasks in JSF

    I have a form in JSF page which contains different faces components. These faces bind to ADF BC to insert one row in the database when the user press commandButton. Also I need to bind the value of one inputText in that form to managed bean to execute another task in the application when the user press the same commandButton.
    The code of the inputText:
    <h:inputText value="#{bindings.ProjectNumber.inputValue}"
    id="pn"
    size="10"
    required="#{bindings.ProjectNumber.mandatory}">
    The code of commandButton:
    <h:commandButton actionListener="#{bindings.Commit.execute}"
    value="Save"
    disabled="#{bindings.Commit.actionEnabled}"/>
    The managed bean is �findInspector�. I tried to insert inputHidden inside commandButton tag and assign the value of the inputText to the inputHidden as follows:
    <h:commandButton actionListener="#{bindings.Commit.execute}"
    value="Save"
    disabled="#{bindings.Commit.actionEnabled}">
    <h:inputHidden value="#{bindings.ProjectNumber.inputValue}" binding="#{findInspector.project}"/>
    </h:commandButton>
    But it was not work
    Please how can I write the code to use the value of the inputText more than one time in the JSF(one to insert one row by using ADF BC and another to use the same value to bind to a managed bean) and how to use one commandButton to execute two tasks in JSF.
    Thank you
    Waheed

    Just dopublic void execute() {
        anotherAction(inputValue);
    I guess those articles might be interesting about passing params and the usage of inputHidden and also about using datatables:
    http://balusc.xs4all.nl/srv/dev-jep-com.html
    http://balusc.xs4all.nl/srv/dev-jep-dat.html

  • There used to be a extension for Safari called "close all tabs". It is no longer on the extension list. Does anybody know why it was removed?

    There used to be a extension for Safari called "close all tabs". It is no longer on the extension list. Does anybody know why it was removed?

    Mr. Davis answer is essentially what that extension did.  I thank Mr. Davis for this answer as I was not aware of this method.  I only brought this up becasue in Lion there is a nasty habit of Safari opening all previous tabs that where not closed when shuting down the computer.  This can cause a long delay in opening Safari becasue of all the tabs opening up.  The "close all tabs" exstension stopped all this opening process.  I have to assume that Apple replaced the extension with the process that Mr. Davis describes, however, the extension was a lot faster. By the way, I have this extension still and I still use it. I just wanted to pass it on to some other users, but guess I will have to give up on that idea.

  • How to get express to only look for in house extreme base

    How do I get a airport express to only look for the extreme base in my house only

    Hello:
    There used to be a way (through settings) to limit distance of transmission.  I looked for it when I read your question, but it seems to be gone.
    Barry

  • How to use expression script to trip off all trailing non-numeric character

    Hi,
    I used JDev11.1.1.2.
    Now a field value like “7.5.3.10BQF”, “7.8.2.XFP”, and another dynamic LOV depends on this value to filter, so we want to trip off all trailing non-numeric characters (including whitespace and periods), for example to “7.5.3.10BQF”, we will filter LOV using "%7.5.3.10%",for "7.8.2.XFP", we will filter LOV using "%7.8.2%".
    But I don't know how to write groovy expression to implement this function.
    Any advice will be great help.
    thanks,
    zeroxin

    Hi,
    The third syntax you used is correct i.e.
    DW_CRF.PKG_LPS_CRF_LOAD_TRANS.sp_load_target(''LOAD_CRF'', ''LOAD_LOAN_TRAN'', CURRENT_TIMESTAMP, NULL);
    Alternatively you can use
    DW_CRF.PKG_LPS_CRF_LOAD_TRANS.sp_load_target(''LOAD_CRF'', ''LOAD_LOAN_TRAN'', CURRENT_TIMESTAMP, '''');
    all the other calls give syntax errors that are expected. The third call is giving an application error which you will need to look into (maybe starting at "DW_CRF.PKG_LPS_CRF_LOAD_TRANS", line 958). One thing that may help clarify things is if you were to switch to naming your parameters e.g. target_name=>''LOAD_CRF'' since that helps clarify exactly what parameter is called with which value.
    Hope this helps,
    Ravi.

Maybe you are looking for