How to Use External Fonts

Hi All,
How can I use extrnal fonts i.e (Windows\Fonts) in my PDF Reports? I'm using APEX 3.01 to print my reports to PDF files. Arabic Characters Appers like ????.
Same report Appears OK when I select HTML, Excel, word as my print file.
Thanks,
Ribhi

I have successfully used Russian Fonts in LV 7. There are two ways to go about this. The first way is to use an ini or config file to do the conversion for you. This way you can type russian into the file and read in the proper strings. The second way is to take the integer value of the character and type cast it to a string. You must have the russian font installed first before this will work. My example used the alphabet and converted it to Russian. I used the ER Univers 1251 font and used a for loop that will run 32 times and added the iteration terminal with the value of 192 for lower case and type cased each value into a string from an integer. For upper case letters add the iteration terminal with 224. This will display the Russian Alphabet. Hope this h
elps.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

Similar Messages

How to use external hard drive and iTunes together?

how to use external hard drive and iTunes together?

Yes I did get to that part.... I went trough external to retrive itunes folder... When I selected the folder, it said that it was locked, choose another folder... I then went to my external again to my itunes folder and and used command I to see if folder was locked and it wasn't.... it was suggested on another forum to reboot.. which I did and still same problem... All I want to do is link my external hard drive that has my itunes playlist from another Mac to my new one.. and to also use the external as the main source for adding new songs to my playlist...

How to use unicode fonts in Oracle forms 10g?

Hi I am working in forms 10g for quite a long time, the software that I have developed so far are all in English language. Now I have requirements to use Bengali Fonts in Forms 10g. I am facing difficulties doing that. Please reply with help. Thanks
Hasan Al Mamun

Check this forum post (though that is for 6i, it would be of helpful for you)
How to use unicode fonts in Oracle forms 10g?
-Arun

How to use MICR fonts in Adobe forms (webdynpro java

Hi,
We have a requirement where we need to print some MICR codes (for checks) through Adobe Forms.
I have installed some true type MICR fonts in windows and Adobe Font Manager (in ADS) as well.
It is visible in the Adobe Form design time (Font palette) and when I use the font for text, it is visible in preview too. But when I run the web dynpro application, in the online form it is converted into Standard font (Times new Roman).
Is there anyway to handle this issue.
Please let me know.
I am using NWDS 7.0.1
Adobe Live cycle designer 7.1
SAP NW 2004s SP14
Thank you,
Vasu

Check this forum post (though that is for 6i, it would be of helpful for you)
How to use unicode fonts in Oracle forms 10g?
-Arun

How to use external Java API in Java Embedd inside BPEL

How to use external classes inside the BPEL in Java Embed Activity ? Any sample code availble ? Like i want to use log4j API inside BPEL.

No you dont have to change your startManagedServer.cmd/.sh everytime you need to have a Java Embedding activity. You only need it in case of using Log4J. As log4j requires a configuration xml viz log4j.debug.xml and log4j.dtd you need to let the soa managed server know about it. The best way to load this configuration files is using the JAVA_OPTIONS command during server startup.
Hope the explanation helps.

How to use external library(in .jar format) in netbeans project?

How to use external library(in .jar format) in netbeans project?
Thanks!

How to use external library(in .jar format) in netbeans project?
Thanks!

How to use Google Fonts in email?

Hi,
I would like to know how I use google fonts in my emails.
We're using the ubuntu font and I see the fonts on my computer but after sending an email the fonts change.
I'm using the addon SmartTemplate4.
Hope any f you know the answer!
Thanks in advance

Several online resources point to these two articles at Campaign Monitor:
* [https://www.campaignmonitor.com/blog/post/3897/using-web-fonts-in-email Using web fonts in email] (Dec. 2012)
* [https://www.campaignmonitor.com/resources/will-it-work/webfonts/ Web Fonts] (permanent resource)
The first link provides examples on how to do this, while the second one has informaiton about email client support & compatibility with this feature.
Keep in mind using web fonts will have a limited effect if viewing such emails while offline.
[http://kb.mozillazine.org/Default_HTML_font_for_new_messages_-_Thunderbird This older MozillaZine article] also has information about fonts use in Thunderbird. In my experience in most cases the receiving party will have to have the fonts locally installed for the best results.

How to use unicode font in J2ME

Hi,
I want to create some mobile application using Unicode Font in J2ME.
Please help me about how to use Unicode Font in J2ME and how to configure Unicode Font in J2ME SDK 3.0 Early Access

http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=2&t=001235
http://www.linuxforum.net/chinese/develop/java.html
Hope its of help to you.

How to use external jars in NW2004

Hello Experts,
can i use the same approach mentioned in the below Weblog for using the external jars in NW2004.
/people/bertram.ganz/blog/2008/11/24/how-to-use-external-jar-files-in-web-dynpro-development-components
and if not then what will be the best way to achieve it in NW2004.
Please provide your inputs on above.
Regards,
Siddharth

Hi Sidharth,
If you are using web dynpro DC perspective then you need to follow the following points to use the external jar files in it.
1. Create a external library project.
2. copy the external jars in the library folder os the projects.
3.) Select all the jars from the u201CLibrariesu201D folder, Right click and then select Development Component and click on Add to Public Part
4.Select the first Radio Button (Provides an API)and give some nameto it.
5. Repeat the step no 3 but now select the second radio button other than as selected in step no 4.
6. Now build your lirary DC.
7. Now create a j2ee DC project.
8. ) Expand the node DC Definition and Right Click on Used DC. Select Add Used DC.
9. Select the External Library DC with build time dependency.
10.Right click on the J2EE DC and then select Development Component followed by Build
11. Right click on the J2EE DC and then select Development Component followed by Deploy
now you can use both the libary DC and the j2ee DC in your web dynpro DC as used DC.
But if you have created a web dynpro project only(but not DC) than you can directly add the external jars in java build path
hope this will help
regards
Narendra
Edited by: Narendra Singh on Oct 27, 2009 11:22 AM

HOW TO: using custom fonts in native storyboard views from an ANE on iOS

Hey,
In our apps, we have embedded storyboards into an ANE, and successfully used those screens in an AIR app, and figured out how to use custom fonts in those views.
I wrote a quick blog post about it and just thought I'd share it real quick in case it helps someone.
ANE for iOS with Custom Framework – Using Custom Fonts | khef.co

Hi WayHsieh,
>>can I just "install" fonts through Word App? Does Word Apps have enough privilege to install fonts on Windows? Can I just click a button in Word App, and then it will install fonts automatically?<<
Based on my understanding, it is hard to achieve the goal. Because the app webpage is hosted inside an Internet Explorer control which, in turn, is hosted inside an app runtime process that provides security and performance isolation and it is under
low-Integrity level.
Here is the figure for apps for Office runtime environment in Windows-based desktop and tablet clients:
You can get more detail about Privacy and security from links below:
Privacy and security for apps for Office
Hope it is helpful.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to use External Tables

Hi, I want to know how to use external tables? The procedure i follow for SQL*Loader in my shell script is:
Call the sqlldr
Check return code
If return code = 2. get count of records from bad file and exit.
If return code != 0 and != 2 then exit as fatal error
If return code = 0 then continue.
But i don't understand how to use external table as it is not invoked and does not have a return code.

Hello,
What do you mean alogrithim, do you mean to invoke external table as you invoke sqlldr? You can generate external table script from sqlldr and use it to load data but you might have to modify the table name and datafile name . You can see if any bad file generated from sqlldr and if yes then you can generate external table (using sqlldr) or based on your bad file. May be if you can list what exactly you want in bullet points, then it will be easier to suggest you.
Regards

How to use two fonts in one passage?

I usually use PAGES to write compositions and every time i try to use another font to revise the composition, the font will change back automatically to the font that I used for writing compositions. It bothered me a lot..... How can i revise the composition with another font without change back automatically

Hi.
You can execute scenario from command line http://docs.oracle.com/cd/E14571_01/integrate.1111/e12643/running_executions.htm#BABJEHIG:
On UNIX systems:
./startscen.sh <scenario_name> <scenario_version> <context_code> [<log_level>] [-AGENT_URL=<remote_agent_url>] [-NAME=<local_agent_name>] [-SESSION_NAME=<session_name>] [-KEYWORDS=<keywords>] [<variable>=<value>]*
On Windows systems:
startscen.bat <scenario_name> <scenario_version> <context_code> [<log_level>] [-AGENT_URL=<remote_agent_url>] ["-NAME=<local_agent_name>"] ["-SESSION_NAME=<session_name>"] ["-KEYWORDS=<keywords>"] ["<variable>=<value>"]*

How to use the fonts in the graphics menu

I am looking to add text from the graphics options on the right hand side of the screen. When I double click or drag one of the text options to my project a text box appears, however the text is not the one selected from the options on the right – instead the text appears and I can change the text from the list of standard fonts at the lower left - and the font I double clicked from the menu on the left isn't listed.
How can I select and use the fonts listed on the graphics list at the right? I am looking to use the gray and black "outline" font.
Thank you!

When I press the "+" at the lower right corner of the screen I am presented with, among other things, a selection of font types. I am able to change the text color in the graphics menu but can't figure out how to use one of the fonts listed in the menu. For example, from the graphics menu I select "type" then "text" and from the fonts listed I double click "outline" and a text box appears on my project with "your text here", however the font is "rosewood std" and the only fonts available are from the typical list - no outline font as listed in the graphics menu on the right. When I double click the text type "outline" the font doesn't change. I think I am missing a step somewhere but can't figure it out. Any help would be appreciated. Thanks.

How to use external libraries jar files in the composite application?

Hi,
I have some external jars files (which consists of java classes) that I would like to use in my composite application.
I have created a DC with type as external library for the jars. However, I don't know how to specify the DC to be used in my caf application.
Can anyone help?
Thanks.
Regards,
Fui Voon

Hi,
My jar files consists only java classes and a manifest.mf. The files are compiled using jdk 1.4.2-b28. Will this be any issue?
It seems that if I ignore the error and continue step 7 which is to do deployment of the ear, the error given is
Cannot update it.
Caused by: com.sap.engine.library.bytecode.cf.CFException: Invalid constant pool tag, 60 at index 41.
Does anyone know what that mean?
Is there any sample that teach how to deploy external libraries as bundled library?
Thanks.
Regards,
Fui Voon

How to use OCR Font A type by the time of writing some text into Pdf fil

Hi,
I am generating one pdf file in java. How can I use OCR Font A for text of pdf file ..Please can any one help where can I get OCR Font A and how to use that one in java ... I want to write some text into pdf file and that text should use OCR Font A family ...
Thanks.

This document shows how to disable OCR during conversion; just do the opposite: https://forums.adobe.com/docs/DOC-3062

How to Use External Fonts

Similar Messages

Maybe you are looking for