How to use external FW HD to put os 9 on only?

When I bought a new larger HD and bought the new Tiger for my cube, I did not check the box where it asked if I wanted OS 9 drivers to be installed. I did a total migration.
One particular processor upgrade company, that makes a 1.8 ghz upgrade for my computer, requires that their firmware be applied using os 9.
I've read that it is still possible for me to set up my external firewire Hard Drive so that it will allow my computer to run os 9 (even though my cubes internal HD can't since the drivers weren't applied initially to the internal HD). Is this true?
Other notes: I backed up my cube to the external FW drive before I put the new drive in. I did a drag and drop where I simply drug the HD icon from the cube [that at the time only had 9 on it] to the external FW HD. However, if I attempt to launch classic, Tiger recognizes that 9 is on the external FW HD and attempts to launch it, but gets stuck and won't finish the launch. I'm guessing there is a configuration problem here where the system folder on the backup HD isn't really set up right [the way I just did a drag and drop backup to it].
If it is possible to apply 9 to my backup firewire HD, is it possible to launch classic from it from Tiger and also if one chooses to simply boot from the external FW HD right into 9 (as I think this processor firmware would require).

Drag and Drop moving of an OS 9 system folder should work fine.
Running classic off an external drive also shoudl work fine.
You coudl try booting off an OS 9 CD - which can boot all the way to a fully operational desktop instead of just an installer.
I prefer to have a stripped down version of OS 9 for use in Classic and leave the full OS 9 for native booting.

Similar Messages

How to use external hard drive and iTunes together?

how to use external hard drive and iTunes together?

Yes I did get to that part.... I went trough external to retrive itunes folder... When I selected the folder, it said that it was locked, choose another folder... I then went to my external again to my itunes folder and and used command I to see if folder was locked and it wasn't.... it was suggested on another forum to reboot.. which I did and still same problem... All I want to do is link my external hard drive that has my itunes playlist from another Mac to my new one.. and to also use the external as the main source for adding new songs to my playlist...

How to use external Java API in Java Embedd inside BPEL

How to use external classes inside the BPEL in Java Embed Activity ? Any sample code availble ? Like i want to use log4j API inside BPEL.

No you dont have to change your startManagedServer.cmd/.sh everytime you need to have a Java Embedding activity. You only need it in case of using Log4J. As log4j requires a configuration xml viz log4j.debug.xml and log4j.dtd you need to let the soa managed server know about it. The best way to load this configuration files is using the JAVA_OPTIONS command during server startup.
Hope the explanation helps.

How to use external library(in .jar format) in netbeans project?

How to use external library(in .jar format) in netbeans project?
Thanks!

How to use external library(in .jar format) in netbeans project?
Thanks!

How to use external jars in NW2004

Hello Experts,
can i use the same approach mentioned in the below Weblog for using the external jars in NW2004.
/people/bertram.ganz/blog/2008/11/24/how-to-use-external-jar-files-in-web-dynpro-development-components
and if not then what will be the best way to achieve it in NW2004.
Please provide your inputs on above.
Regards,
Siddharth

Hi Sidharth,
If you are using web dynpro DC perspective then you need to follow the following points to use the external jar files in it.
1. Create a external library project.
2. copy the external jars in the library folder os the projects.
3.) Select all the jars from the u201CLibrariesu201D folder, Right click and then select Development Component and click on Add to Public Part
4.Select the first Radio Button (Provides an API)and give some nameto it.
5. Repeat the step no 3 but now select the second radio button other than as selected in step no 4.
6. Now build your lirary DC.
7. Now create a j2ee DC project.
8. ) Expand the node DC Definition and Right Click on Used DC. Select Add Used DC.
9. Select the External Library DC with build time dependency.
10.Right click on the J2EE DC and then select Development Component followed by Build
11. Right click on the J2EE DC and then select Development Component followed by Deploy
now you can use both the libary DC and the j2ee DC in your web dynpro DC as used DC.
But if you have created a web dynpro project only(but not DC) than you can directly add the external jars in java build path
hope this will help
regards
Narendra
Edited by: Narendra Singh on Oct 27, 2009 11:22 AM

How to use External Tables

Hi, I want to know how to use external tables? The procedure i follow for SQL*Loader in my shell script is:
Call the sqlldr
Check return code
If return code = 2. get count of records from bad file and exit.
If return code != 0 and != 2 then exit as fatal error
If return code = 0 then continue.
But i don't understand how to use external table as it is not invoked and does not have a return code.

Hello,
What do you mean alogrithim, do you mean to invoke external table as you invoke sqlldr? You can generate external table script from sqlldr and use it to load data but you might have to modify the table name and datafile name . You can see if any bad file generated from sqlldr and if yes then you can generate external table (using sqlldr) or based on your bad file. May be if you can list what exactly you want in bullet points, then it will be easier to suggest you.
Regards

How to use Mulitple DAQs with a single triggered event on only one of the DAQs

I have three PXI6115 and would like to tie all these to a single triggered event on one of the DAQs. I've scaned the examples and any assistance would be greatly appreciated....

TCjr,
Please refer to your other post:
How to use Multiple DAQs with a single triggered event on only one of the DAQs

How to use external libraries jar files in the composite application?

Hi,
I have some external jars files (which consists of java classes) that I would like to use in my composite application.
I have created a DC with type as external library for the jars. However, I don't know how to specify the DC to be used in my caf application.
Can anyone help?
Thanks.
Regards,
Fui Voon

Hi,
My jar files consists only java classes and a manifest.mf. The files are compiled using jdk 1.4.2-b28. Will this be any issue?
It seems that if I ignore the error and continue step 7 which is to do deployment of the ear, the error given is
Cannot update it.
Caused by: com.sap.engine.library.bytecode.cf.CFException: Invalid constant pool tag, 60 at index 41.
Does anyone know what that mean?
Is there any sample that teach how to deploy external libraries as bundled library?
Thanks.
Regards,
Fui Voon

How to use external table - creating NFS mount -the details involved

Hi,
We are using Oracle 10.2.0.3 on Solaris 10. I want to use external tables to load huge csv data into the database. This concept was tested and also found to be working fine. But my doubt that : since ours is a J2EE application, the csv files have to come from the front end- from the app server. So in this case how to move them to the db server?
For my testing I just used putty to transfer the file to db server, than ran the dos2unix command to strip off the control character at the end of file. but since this is to be done from the app server, putty can not be used. In this case how can this be done? Are there any risks or security issues involved in this process?
Regards

orausern wrote:
For my testing I just used putty to transfer the file to db server, than ran the dos2unix command to strip off the control character at the end of file. but since this is to be done from the app server, putty can not be used. In this case how can this be done? Are there any risks or security issues involved in this process? Not sure why "putty" cannot be used. This s/w uses the standard telnet and ssh protocols. Why would it not work?
As for getting the files from the app server to the db server. There are a number of options.
You can look at it from an o/s replication level. The command rdist is common on most (if not all) Unix/Linux flavours and used for remote distribution and sync'ing of files and directories. It also supports scp as the underlying protocol (instead of the older rcp protocol).
You can use file sharing - the typical Unix approach would be to use NFS. Samba is also an option if NTLM (Windows) is already used in the organisation and you want to hook this into your existing security infrastructure (e.g. using Microsoft's Active Directory).
You can use a cluster file system - a file system that resides on shared storage and can be used by by both app and db servers as a mounted/cooked file system. Cluster file systems like ACFS, OCFS2 and GFS exist for Linux.
You can go for a pull method - where the db server on client instruction (that provides the file details), connects to the app server (using scp/sftp/ftp), copy that file from the app server, and then proceed to load it. You can even add a compression feature to this - so that the db server copies a zipped file from the app server and then unzip it for loading.
Security issues. Well, if the internals is not exposed then security will not be a problem. For example, defining a trusted connection between app server ad db server - so the client instruction does not have to contain any authentication data. Letting the client instruction only specify the filename and have the internal code use a standard and fixed directory structure. That way the client cannot instruct something like +/etc/shadow+ be copied from the app server and loaded into the db sever as a data file. Etc.

How to use external DLLs in InDesign server plugin

Hi,
I am working on a project, which is having dependency on libxml2 library. I compiled the code on 64 bit Windows platform and using InDesign server 64 bit version. I put the required DLLs in Adobe InDesign CS6 Server x64 folder(with other DLLs). But now my plugin is not loading in server and also not throwing any error message on command prompt.
If I remove the libxml2's method call, then plugin is loading successfully.
Is there any other way to use external DLL or I am missing something?
Thanks & Regards,
Harsh

Hi Sidharth,
If you are using web dynpro DC perspective then you need to follow the following points to use the external jar files in it.
1. Create a external library project.
2. copy the external jars in the library folder os the projects.
3.) Select all the jars from the u201CLibrariesu201D folder, Right click and then select Development Component and click on Add to Public Part
4.Select the first Radio Button (Provides an API)and give some nameto it.
5. Repeat the step no 3 but now select the second radio button other than as selected in step no 4.
6. Now build your lirary DC.
7. Now create a j2ee DC project.
8. ) Expand the node DC Definition and Right Click on Used DC. Select Add Used DC.
9. Select the External Library DC with build time dependency.
10.Right click on the J2EE DC and then select Development Component followed by Build
11. Right click on the J2EE DC and then select Development Component followed by Deploy
now you can use both the libary DC and the j2ee DC in your web dynpro DC as used DC.
But if you have created a web dynpro project only(but not DC) than you can directly add the external jars in java build path
hope this will help
regards
Narendra
Edited by: Narendra Singh on Oct 27, 2009 11:22 AM

How to use External Routing in Human Task

Hi,
Could you please help me knowing how to create External Routing in Human Task in SOA Composite.
Thanks

When defining the external routing class in the .task, you can define the name value pairs which you want to pass to the program. Here you can pass dynamic values to the class as well by reading the appropiate node from the payload. In your class the name, value would be available in the "Map propertyBag" parameters in Rajiv's example link.
Document says:
Map of properties — When an assignment service is specified, a list of properties can also be specified to correlate callbacks with backend services that determine the task assignees.Or if you are too lazy to map many parameters and values, you can always read the whole Task task and then use getDocument and some xml reading to determine the values. This Task is the whole document.
API:
http://docs.oracle.com/cd/E17904_01/apirefs.1111/e10660/oracle/bpel/services/workflow/task/model/TaskType.html#getDocument__Document says:
Task document — The task document that is executed by the workflow. The task document contains the payload and other task information like current state, and so on.Also you need to make sure that you are maintaining the state of the assignment class, doc says:
The assignment service class cannot be stateful because every time workflow services need to call the assignment service, it creates a new instance.Thus if you are doing multiple serial assignments one after the another and if your server restarts in between, then the approval would start at the first assignee again. Suppose in Rajiv's doc link e.g., if the task is assigned to 'wfaulk' and the server restarts then the task would be assigned back to 'jstein'. In order to prevent this you need to modify the java code and each time the variable changes it's value you need to place it in a dehydration store. Also on each action over the process you need to reinitialize the variable from that dehydration store.
-Bikash

How to use external workcentre in pm order operations?

Dear experts,
i would like to use external workcenter in pm order operations using PM01 control key. Can any body explain about how to create external work centres for using in PM orders. similarly can anybody explain about how would we settle the amounts for external work centre activities? how it differs from normal in-house work centres?
regards,
Varsha

Hi ,
You can check the below link related to
(http://help.sap.com/saphelp_47x200/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm)
The link is related to Maintenance Order processing with an External Company as Work Center ..
regards
pushpa

How to use external jar

i have downloaded a jar file from apache web site how to use it. i mean where it placed to use class of jar in java file.

Try putting it in your classpath.

Report question: how to use external table to bring data from excel file?

i need to import excel data into oracle report, how to do that? thanks.

Hi... What is the error message you get when using external tables?
You must create a control center connection in the Connection Explorer.
I recommend you read this:
http://download-east.oracle.com/docs/cd/B31080_01/doc/owb.102/b28223/toc.htm
Look for the following sections:
- Using External Tables (and the "External Tables versus Flat File Operators" sub section)
- About Flat File Modules
- Chapter 16, Deploying Target Systems
Regards,
Marcos

How to use external monitor with laptop closed

My external monitor goes to sleep when i close the Macbook Air lid. How do i stop that from happening?

Mac notebooks: How to use your computer in closed clamshell ...

How to use external FW HD to put os 9 on only?

Similar Messages

Maybe you are looking for