How to use eyedropper tool?

Hi Everyone,
How to use eyedropper tool?
Please describe to me.

Hi, yes sorry I mean colour overlay.
Here's an example. If you fill a layer with the paint bucket tool using red. And then give that same layer a 'colour overlay' of blue. When you use the eye dropper tool it will give you the red colour. I was just wondering if there's a key I can press at the same time as using the eyedropper tool that will set the foreground colour (2 squares at the bottom of the tools toolbar) to blue in this case, rather than the underlying red.

Similar Messages

How to use pen tool in Adobe and Illustrator?

How to use pen tool in Adobe and Illustrator?

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

How to use bind tool in flash

i'm using flash cs5.5 . i have a problem with bind tool. how to use it.i'm trying lot of times, but i can't find how to use bind tool.please any can help me with a helpful answer.

Hi Sampath,
Please use this Help article to learn how to use Bind Tool.
http://help.adobe.com/en_US/flash/cs/using/WS58BD3A02-DA25-488f-B534-AE5463A24833.html
Please let me know if you would need more help.
Thanks,
Suhas Yogin

Assigning stroke attribute from one shape to fill attribute of another shape using eyedropper tool?

Unalbe to use eyedropper tool to pick up stroke attribute from one shape to use in fill of another shape. I shift click with my eyedropper tool on stroke but does not transfer that color to my fill color of other shape. Fill color shows correctly in tools panel but not in shape or control panel.

I have through trial and error discovered as a fifth step to JamArtz instructions, if I go to the color panel flyout menu and click on CMYK, my effect will take effect: I know this to be a band aide solution not a fix. Can’t see anything in my preferences to cause the issue.
1.Select the destination object (the one for which you want to change the fill).
2. Make the fill swatch in the Color Panel active (important step).
3. Select the eyedropper.
4. Shift-click on the stroke of the source object (the one whose stroke you want to apply to the fill of the destination object).
5. From the Color Panel fly out menu, click on CMYK (which is already toggled on) the change will take effect.

DW CS4 Freezes when using eyedropper tool

Whenever using eyedropper tool to sample colors from any
source - Kuhler, another color section of the site, etc - DW CS4
freezes and I must reboot. Any ideas? I have already updated to
latest upgrade from Adobe - Have only had the program for less than
a week.

I have DW CS4 on Windows XP Pro SP2 and experienced the same
thing. I can Pass the wand over the background and key in the
number, but it freezes if I click on the background using the
eyedropper wand. Strange.

Hi Any body Knows How to use CAT Tool for Up Loading?

Hi
If any body knows how to use CAT Tool for up loading transactions, explain the steps.
Our requirement is, we want to up load transactions like Oppor , Quotation,Order etc...we want to up load these transcations from Local system to CRM Server
how to do this? Let me know the steps.
Regards
Venkat

If you have 10,000 or less, CATT is a reasonable method, but I would suspect that you have far more than that if you're needing to load transactions.
LSMW is probably a better way to go if you have more than 10k, but I am not familiar with LSMW

Hello how to use nativetoacii tool

hi,
iam unable to display the properties file labels which are in arbic properly..i created a properties file called MessageBundle_ar_AE.properties and saved it as UTF-8 formatt..i read soeme where that we have to use nativetoacci for displayingn them correctly..can any body tell me how to use this tool..for my above file..i need synatx for this..
Regards,

Look on your computer. Under the directory where your JDK is installed you'll find a "docs" directory. Under that there's a "tooldocs" directory and in that there's a file "tools.html". Look in there.

CS6 how to use gradient Tool for outline

Hi!
I am a graphic designer I like to work hand and not numbers. The new version of Ai CS6 gradients can be given for strokes. Great!
Please help me how exactly I can do it with a convenient tool 'Gradient Tool'?
Does not respond to changes in drag when I try to use the mouse to outline?
In advertising and instructions CS6 somehow strange is described ... I do not understand.
http://helpx.adobe.com/illustrator/using/gradient-panel-gradient-tool-overview.html
Regards!

@Ivan David: Thank you for your response. I asked for something else. How to use the "Gradient Tool" no gradient palete. Why are chceck "ON" you own answer as helpful?
As I explained I am a graphic designer will create a hands than numbers. I do not understand why no tool "gradient tool" works to fill but it does not work on outline.
If I get a chance to show off with a representative of Adobe's a bit like crying...
We need fair and real changes. According to me the most to do is to think about using Illustrator for themselves of their creators Illustrator.
* For example in work with new gradient tool.
- Why when you edit the gradient for the outline of the object is displayed slider gradient fill???. It's confusing and totally unnecessary.
- Why is the Gradient Tool Outline tool does not work???
- Why Control bar does not drop the Gradient icon??? What is the control bar when no controls? Control Bar cool idea but how would the developers were thinking of him as a stranger?
- Why still the option of working with the gradient tool to fill, when you edit a color marker, I can not turn on the Eyedropper tool to select a color from another object???
- Why does the apperance in the attributes panel stoke attribute does not appear easy gradient of a potential of gradient palette???
- Why can not I fast copy between objects only attribute gradient???
After all, it's easy and does not require a great job developers reach a solution to the function. I know that my naive questions now, and nobody I will not answer to them but sorrow grows. Sometimes I feel like a fly in pitch.
This is not normal.
So many years have passed, there was a lot of new tools but Adobe wants to use the same techniques as in his first product. Refresh in the new 64 bit version is also not so different to that in compared to regular equipment and are currently using...
http://www.youtube.com/watch?v=N3TDmvZma84
Sorry for the harsh words of criticism, But your answer is a perfect example that Adobe does not know what's going to people who work with Illustrator on a daily basis and as can be seen starting to irritate me tight.
Perhaps I have exaggerated expectations about the tools Adobe. I understand that there is so much work and needs, but I lack only a change of thinking about working with tools in Illustartor and reducing unnecessary clicks. Now, instead of tools to work with each other often exclusive and force running around.
Regards!

How to use bone tool without getting my vector/object distort?

Wish to get some help here. I drawn my human body figure using pen tool. I connect the bone tool directly without separating the part of (hand,legs and head) into symbol. After that, I try to move the hand but it get distort. Not just the hand but the body and head also getting distort as well. Do we need to necessary convert the body parts to symbol first before connecting the bone? Thanks.

> So, is it right if I say that the services available in the backend are already implemented? And just creating an endpoint for them would make them ready for use?
Yes: kind of instant services
> Also if I consume a service, say, 'CreateSalesOrder_In' for example, will it create entries in all my Sales order relevant tables (VBAK, VBAP) automatically using a BAPI internally?
The service has the task to do all necessary steps, whether with or without using a BAPI.
> Actually, I have these doubts because during my time at SAP Labs (for the composites team in BusinesByDesign), I used to create business objects in the ESR and create an implementation for the same in the backend using BOPF. But now, in the customer scenario, where a full fledged ECC implementation is used, I am unaware as to how the services would update the tables or even read the relevant data.
My consumer view on aservice is that I do not have to know how the service works, just need to know how to call it.
Regards, Boris

How to use Xcelsius tool in Desktop applications

Hello
This is shankar, from IMS CRM4 team in SAP. We have a requirement for interactive anlalytics in our product and found that Xcelisus is the correct approach.
Can you please clarify the following
1. How to use the Xcelsius tool in desktop applications.
2. Is Xcelsius Viewer free version available which can used only to view the interactive analytics. Xcelsius designer is not required for all the users.
Thank You
Shankar

Hello Victor
Thank you for your inputs !!
Point 2 is very clear to me that we do not need any additional software to run the SWF files.
We have CRM Mobile offline product with Crystal reports integrated already. CRM Mobile Offline solution is a desktop application and there is no intutive analytics.
So i would like to know more on how to link the data (Excel or XML) to Xcelisus tool and get the output SWF file. Can it be done through the command line (without using Xcelsius designer) ??. Do we need to have any licensed version of Xcelisus for this task??
This will promote both our prodcut and BOBJ Xcelisus prodcut as well
Regards
Shankar

How to use javadoc tool?

I am new to Java, I thought you have to manually write all the java doc comments into your source code of java application. Some one told me javadoc tool can actually automatically add the comments for you. so I tried to that with my simpliest HelloWorld.java file, but got following errors:
A:\>java HelloWorld
Hello World I am back in again,
and I WILL make it this time!
A:\>javadoc HelloWorld
Loading source files for package HelloWorld...
javadoc: No source files for package HelloWorld
1 error
A:\>
Can you help me explaining how to use automatic javadoc tool?
Thanks,
Ken

This GREAT! it worked and added bunch of .html files
into my curren directory with my HelloWorld.java.
So, it will NOT add text doc comments into my
HelloWorld.java source text code correct?
Thanks, KenThat's correct - after all, how does the tool know what you want to say in your source code unless you tell it?. There are IDE's that present a GUI interface that will make it easier for you to enter your comments, but you still have to put in the comments. Also, Sun has some style guidelines on how to document your source code that might interest you:
http://java.sun.com/j2se/javadoc/writingdoccomments/index.html

To know How to Use shp2sdo tool

Hi
I want to Insert some shape files into my databse.
I Have shp2sdo tool.
I didn't Understand how to insert using that tool.
I am Very new to Oracle Spatial.
Can any one please help me
Please tell me in detail
Now am using Oracle 9i.
Thank you In Advance
San

San,
Take a look at
How shape files loaded into DB
Ivan

How to use deploy tool in AIA

Hi ,
I am using Tokenizer tool. I have followed the following link
http://blogs.oracle.com/learnwithpavan/2009/09/deploy_using_the_deploy_tool_u.html.
I am using ANT 1.7.0 comes with AIA installation.
export AIA_HOME=/opt/webapps/oracle/product/AIA
export ORACLE_HOME=/opt/webapps/oracle/product/SOAAS_10.1.3
export PATH=/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin
export JAVA_HOME=/opt/webapps/JDK/jdk1.5.0_20/jre
ant runesb -DTokenizerPropsFilePath=/opt/webapps/oracle/product/AIA/util/DeployTool/Tokenizer.properties
following error i am getting
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: uname: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: basename: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: dirname: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
/opt/webapps/oracle/product/AIA/apache-ant-1.7.0/bin/ant: false: not found
Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/tools/ant/launch/Launcher
Please update if anyone has faced same issue

Please check the ant home properly.
do echo on ant_home. If this is not helping you.
Please follow the steps below.
Steps to deploy AIA Components:
1. Navigate to the following location in the server.
     D:\product\10.1.3.1\AIA\util\DeployTool>
2. Set env variable to AIA_HOME, ORACLE_HOME and ANT_HOME folder
     set AIA_HOME=D:\product\10.1.3.1\AIA\
     set ORACLE_HOME=D:\product\10.1.3.1\OracleAS_1\
3. Make sure your process folder and it's artifacts are NOT read-only
4. Copy the bpel projects and Esb project to the following locations.
     D:\product\10.1.3.1\AIA\util\DeployTool\BpelCopy
     D:\product\10.1.3.1\AIA\util\DeployTool\EsbCopy
5. open and edit \Tokenizer\build.properties in a text editor and populate the below values
aia.home= Path of the folder which contains BPEL and ESB processes that has to be tokenized.
Make sure that above Path contains Forward slash.(/)
If you are planning to deploy only one of the BPEL or ESB processes then leave the other path as blank.
DONT NOT MODIFY ANY OTHER PARAMETERS IN THIS FILE.
aia.home=D:/product/10.1.3.1/AIA/util/DeployTool/BpelCopy/
6. Go to command prompt and change the current directory to \Tokenizer
7. For BPEL processes execute the command ">ant runbpel" and for ESB processes execute the command ">ant runesb"
     $ ant runesb -DTokenizerPropsFilePath=D:/product/AIA_HOME/util/DeployTool/Tokenizer.properties
     $ ant runbpel -DTokenizerPropsFilePath=D:/product/AIA_HOME/util/DeployTool/Tokenizer.properties
     Note: you can run with the AIA_HOME in the command doesn't matter.
8. Goto $AIA_HOME/bin and source the AIA environment file - aiaenv.sh.
     This will source all the environment variables.
9. Then run "ant" to deploy the process from the bpel project folder as below.
     D:\product\10.1.3.1\AIA\bin>aiaenv.bat
10. D:\product\10.1.3.1\AIA\util\DeployTool\BpelCopy\XXX_CustomerSyncUEKProvAdapterServiceBPEL_V1>ant
     Note: If you want to deploy to the different domain. Please change the domain name in the build.properties for the bpel process.
Thanks,
Vijay.B

How to use appletviewer tool in JDK1.4

hi
can anyone help me in running an applet program from different directory. also i need to set classpath for applet whenever i am using appletviewer tool.
thankx

hi
can anyone help me in running an applet
applet program from different directory. also i need
to set classpath for applet whenever i am using
appletviewer tool.
thankxJust open the html in JCreator and execute
google for the IDE

How to Use NDS Tool and create a very simple application

Hi All,
Today i have Installed NDS on my machine,but i dont know
how to use it,is there any guide inside NDS which gives me step by step procedure to create a simple application.
Can any link help me know about this.version of NDS is 2.0.9.Is this latest one?
I am pretty confused about NDS and PDK,if NDS can be used to develop java apllications ,then whats the need of PDK at all?
Thanks in Advance
Rani A

Hi Rani,
The Portal Development Kit (<b>PDK</b>) provides documentation and examples with source code to demonstrate how to develop portal applications and portal content for the SAP NetWeaver Portal using the <b>SAP NetWeaver Developer Studio</b>.
PDK includes coding examples on the following topics:
*Creating Portal Components and Portal Services,Portal Profiles,Resources,Internationalization,Portal Beans,Page Builder,EPCF,Application Integrator,Connector Framework,Portal Navigation,Object Based Navigation,Transformation Service,User Management etc
PDK is for deployment for portal application, has very good documentation of portal development, contains sample application, Java Docs for all the apis for portal and KM and plugins for eclipse(which you don't need if you are using NWDS). It is basically a nice help for developer along with an iviews for uploading par and testing them.
In EP 6.0 it is just business package that you import to your portal. This will then give a "java development" role in portal which can be assigned to users. The role will then create a tab called "Java Development" in the top navigation and click on it you can see all the contents underneath.
If u want to see the application on which an iview is based on import that par file into NWDS.
Regards,
Pooja.

How to use eyedropper tool?

Similar Messages

Maybe you are looking for