How to use Fault schema in WSDL for Error Handling in ALSB

We are not able to view the fault element in our alsb flow under body variable and when we get the error in test console the error comes in bea fault schema,but we want the error in our own defined fault schema.Pls. guide.
Below are the steps we followed to create a wsdl.
Steps:
1. We created a webservice project in workspacestudio and generated a wsdl.
2. Then we have added a fault element manually in that wsdl.
3. Now we have generated a webservice from that modified wsdl.
4. Again we have generated a wsdl from webservice created in step 3.
5. step 4 wsdl is tested and running well on server.
When we try to configure that service as Proxy/Business service in ALSB and view the XPATH Expression Editor, we are not able to view Fault element under variable structures under body variable as shown below.But when we see the design view of our running wsdl in workspace studio it shows the fault element.How to get the fault element in variable body so that we can view the error in our logs in our defined Fault schema instead of BEA fault schema.WDSL is enclosed as an attachment.
Thanks in advance

Have you tried using the "Log" action in your pipeline proxy and log for $body and $fault. This will defin return the $body and $fault if these were parsed correctly

Similar Messages

  • How to use Request header in the OSB error handler

    Hi
    I have a scenario where OSB proxy service accptes the payload and routes to the target service
    and before routing, I'm generating UUId and inserting in to the request header and publishing the request payload along with UUID to another service.
    when the target service is thrown some business fault,i need to publish the fault along with the header(which has UUID).since my target service sends only fault body,header is getting emptied in the error hanlder section.
    How can I use the requestheader in the error handler section. Any help is highly appreciated.
    Thanks,
    N
    Edited by: user13154768 on Sep 23, 2010 3:25 AM
    Edited by: user13154768 on Sep 23, 2010 3:26 AM

    Just assign your request header ($header) to your variable (e.g. $myRequestHeader) and than use this variable in your error handler. Fault response will override your $header but can't override $myRequestHeader.

  • How to use fault message for error handling.

    HI
    Anybody has an idea about how we use fault messages to handle errors in XI
    Thanks
    Debraj

    Hi,
    Refer this link. This pdf file has descriptions about fault message types and how to use it.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4cdfc390-0201-0010-2197-da4ada09f281
    Regards,
    Uma

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • How to use the same email address for outgoing email on two iPads?

    How to use the same email address for outgoing email on two iPads?.   My wife and I both use the same email address.  We receive the same incoming email on both iPads but are unable to send email from my wife's iPad.  She is using an iPad 2 and is usng IOS 6.0.1

    Hi Creaturekeeper,
    If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Take care,
    Alex H.

  • How to use the field of 'FM for Determining Address' in report RSWUWFML2?

    Dear gurus,
    In the selection screen of report RSWUWFML2, there is a field named 'FM for Determining Address' . How to use it? Is it for sending e-mail to specific e-mail addresses?
    Regards
    David

    I will test soon. Thanks to all involved.

  • WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?

    WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
    I have installed KB2734608, but when I search MS13-101 , no patch for Win 2012.
    Can you help me resolve this problem ?
    Thanks

    On Thu, 10 Apr 2014 06:01:48 +0000, fujitsu08 wrote:
    WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
    WSUS has its own, dedicated forum where the WSUS experts answer questions.
    You should repost your question here:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
    Paul Adare - FIM CM MVP
    Aibohphobia: n. Fear of Palindromes

  • How to use find my iPhone app for windows pc

    How to use find my iPhone app for windows pc ... Is it possible to do..
    Or what is the closest app to do that.,,,,,

    iPhone User Guide (For iOS 5.0 Software)
    iCloud: Find My iPhone
    iCloud: Find My iPhone overview
    iCloud: Set up Find My iPhone

  • How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field

    How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field
    eg:
    I have a inner table ,it contains a field named ast_guid,now,I search ten records,contains some duplicate records in the field of ast_guid.but I can not delete the duplicate records as ast_guid.

    If the type of  inner table is standard table,  you should sort the inner table  by the fields before user 'DELETE ADJACENT DUPLICATES  ', and use COMPARING addtion.
    Edited by: Justin on Jun 28, 2009 9:48 AM

  • SMP3 - AppDevelopment (Agentry):how to use GCM (Google cloud Messaging) for Agentry Application.

    Hi, I have a question on SMP3 and AppDevelopment (Agentry): how to use GCM (Google cloud Messaging) for Agentry Application for PUSH notification

    Pratik,
    Let me walk you through the flow with the assumption that the user is on an Android device and "connected" to the Agentry server.
    An emergency workorder is created in SAP and assigned to the technician. 
    The SAP backend system will notify the Agentry server via an XML message that there is a workorder to send.
    Agentry will get the details and if the user is connected attempt to send the workorder to the device via the Push mechanism
    If the push fails to reach the Agentry client, the Agentry server will send a GCM message to the user
    When the user returns to the Agentry client, the normal push processing / fetch will occur to receive the workorder from the server assuming the push retrys are in effect.
    So, essentially you should not have to do anything to get the GCM to work as a secondary notification mechanism.
    If you are looking to do something else with GCM that would be outside of Agentry.
    --Bill

  • How Do You Test a Flash Drive for Errors Using OS X?

    HI. In Windows there are Flash Drive tester that tests if there's something wrong with the Flash drive's chips. How do you test a flash drive for errors on OS X? I bought the HP v220w which is tiny for a 16GB and it's metal. The whole thing goes into the plug. Design wise, it is great, it's very elegant like a jewelry. Thanks in advance.
    Gbu.

    Format it for OS X and run a surface scan on the partition. That should show any hardware problems that don't keep it from working altogether.

  • BPM for error handling and acknowledgements

    Hi,
    Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
    Please send me the link if you have other wise give me the solution on the same.
    Thanks,
    Nagesh

    Hi !
    Just check out these links This might help you.
    Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
    To know about Ack-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
    you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
    The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
    <b>The following link has entire configuration of Receiver XI Adapter (including acknowledgements)</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
           <b>   eror handling in BPM.  
    </b>
    1. CCMS monitoring
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
    2. BPM Monitoring
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
    3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
    Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
    Also see the below BPM related links
    check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
    /people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    Many other examples can be found under the following link at help.sap.com
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    And some weblogs
    https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    /people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
    /people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
    /people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    /people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
    Also have a look at these seminars,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
    Thanks !!!
    Regards
    Abhishek Agrahari
    Questions are welcome here!!
    <b>Also mark helpful answers by rewarding points</b>

  • Option for error handling for DTP, ' no updata, no reporting" and "deactiva

    Hello Gurus,
         option for error handling for DTP, ' no updata, no reporting" and "deactivated" , please give some explanation and instance for them?
    Many Thanks,

    On the Update tab page, specify how you want the system to respond to data records with errors:
                                a.      No update, no reporting (default)
    If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
                                b.      Update valid records, no reporting (request red)
    This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request by setting the overall status on the Status tab page in the monitor (QM action).
                                c.      Update valid records, reporting possible
    Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
    http://help.sap.com/saphelp_smehp1/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
    Hope it helps.
    rgds, Ghuru

  • How to view fault schema under variable structures in alsb

    We are not able to view the fault element in our alsb flow under body variable and when we get the error in test console the error comes in bea fault schema,but we want the error in our own defined fault schema.Pls. guide.
    Below are the steps we followed to create a wsdl.
    Steps:
    1. We created a webservice project in workspacestudio and generated a wsdl.
    2. Then we have added a fault element manually in that wsdl.
    3. Now we have generated a webservice from that modified wsdl.
    4. Again we have generated a wsdl from webservice created in step 3.
    5. step 4 wsdl is tested and running well on server.
    When we try to configure that service as Proxy/Business service in ALSB and view the XPATH Expression Editor, we are not able to view Fault element under variable structures under body variable as shown below.But when we see the design view of our running wsdl in workspace studio it shows the fault element.How to get the fault element in variable body so that we can view the error in our logs in our defined Fault schema instead of BEA fault schema.WDSL is enclosed as an attachment.
    Thanks in advance.

    Have you tried using the "Log" action in your pipeline proxy and log for $body and $fault. This will defin return the $body and $fault if these were parsed correctly

Maybe you are looking for