How to use FCP with tapes that have free run timecode

i have a bunch of tapes the were shot with 4 x Sony HDV-Z1P cameras. the timecode was set to free run in the cameras and all the cameras were synced by resetting the timecode on all the cameras at the same time. and on each tape the cameraman has buttoned on and off probably 8 times a tape or so which means on free run timecode that there is timecode breaks on the tapes,
can anyone tell me the right setting i should be using in FCP so that i can capture the tapes easily (prefer to capture a whole tape in one go) and with the timecode from the tapes, so that the TC shows the jumps when the camera was not recording.
i tried capture now and setting the user preference to ' on TC break, warn after capture. but it captured without the gaps in the timecode, so when the cameraman buttons off-the captured timecode is still continous. and this means i loss matching the tc between the cameras

you need to set it to Make New Clip, no other setting will give you correct timecode for all clips ... you cannot capture accross timecode breaks and have the timecode jump to reflect those breaks. nle software does not work this way.
once you have captured your media (4 x the number of clips per reel) then you can select them all and choose Modify > Make Multicip Sequence

Similar Messages

  • Can you use ResourceBundle with resrouce that are grouped within folders?

    Hi I'm trying to internationalize my program by using the java ResrouceBundle.
    Is there a way to use it with resources that have been grouped into folders?
    For example, instead of using locale to specify the resource name as MessageBundle_en_US.properties, I would like to specify the locale name as the resource folder name like this:
    resources_en_US/MessageBundle.properties
    or resources_fr_FR/MessageBundle.properties etc.
    Is there something already available for this in the API that i'm not aware of or, if possible, is there a way to overwrite the ResrouceBundle package to handle this?

    Hi Simon,
    Yes, I understand people would expect it to work on the emulator too, but the point of Scout is really to provide you information about the real performance (on the device and in production) to be really accurate and reflect the reality.
    Having it work with the emulator would always be an approximation, which could still maybe be valuable, but we thought we would focus on production code.
    But thanks for bringing this up, it is valuable feedback about your experience.
    Thibault Imbert
    Sr. Product Manager | Adobe Scout

  • I have a late 2011 model MacBook Pro running Mountain Lion.  I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV?  I used to run a cable from my mini display port to the HDMI input of a TV.

    I have a late 2011 model MacBook Pro running Mountain Lion.  I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV?  I used to run a cable from my mini display port to the HDMI input of a TV.  This feature seems to be lost in the Mountain Lion upgrade.  Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV?  There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.

    Running a cable to the HDMI port is still supported. (and still works on mine).
    If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection.  Double check all cables.  If that doesn't work try a PRAM reset:
    http://support.apple.com/kb/ht1379

  • How could I update my apps that have my old Apple ID and how could I use face time

    How could I update my apps that have my old Apple ID n how could I use face time

    I can't help you if you don't know your Apple ID and/or password. You can change your password at: Manage My Apple ID. You will need to know the answers to your security questions. If you don't know those, then see the following:
    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • How to improve Oracle Veridata Compair pair performance with tables that have big (30-40MB)CLOB/BLOB fileds ?

    How to improve Oracle Veridata Compair pair performance with tables that have big (30-40MB)CLOB/BLOB fileds ?

    Can you use insert .. returning .. so you do not have to select the empty_clob back out.
    [I have a similar problem but I do not know the primary key to select on, I am really looking for an atomic insert and fill clob mechanism, somone said you can create a clob fill it and use that in the insert, but I have not seen an example yet.]

  • How can I use TopLink for querys that have two and more tables?

    I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
    Thank you for see and answer this question.

    You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
    Zev.
    check out oracle.toplink.expressions.Expression in the 10.1.3 API

  • How to check the sales orders that have been created with an Rebate Agreeme

    Dear Experts,
    Do you know how to check the sales orders that have been created with an Rebate Agreements?
    Thanks!!

    Hi Hoo Laa,
    I have one way but little lengthy.
    Rebate condition always appears in the billing document.
    So 1st you extract the sales order list from Table VBAK.
    once you have the sales order list then you can put your order list in Table VBFA --> Extract the billing document list.
    Now put that list in the table VBRK.
    In VBRK you will get the "Doc. condition" --> put that doc condition in table KONV with your rebate condition type.
    It will show the result.
    Later, through VLOOKUP you can identify in which order you have given rebate to your customer.
    Already said, Little lengthy
    Regards,
    MT

  • [svn:fx-4.0.0] 13714: updating the AIR kits with versions that have the fx4 swc recompiled using SDK 13653

    Revision: 13714
    Revision: 13714
    Author:   [email protected]
    Date:     2010-01-22 08:12:15 -0800 (Fri, 22 Jan 2010)
    Log Message:
    updating the AIR kits with versions that have the fx4 swc recompiled using SDK 13653
    Modified Paths:
        flex/sdk/branches/4.0.0/in/air/mac/AIR Integration Kit.tbz2
        flex/sdk/branches/4.0.0/in/air/win/AIR Integration Kit.zip

    Thanks dude, you saved my ***!
    This is my platformOptions.xml file now:
    <platform xmlns="http://ns.adobe.com/air/extension/3.5">
        <sdkVersion>6.0</sdkVersion>
        <linkerOptions>
            <!-- to link with the libicucore.dylib -->
            <option>-licucore</option>
            <option>-framework GameKit</option>
            <option>-framework CoreData</option>
            <option>-framework StoreKit</option>
            <option>-framework iAd</option>
            <option>-framework MessageUI</option>
         </linkerOptions>
    </platform>
    And it works!
    I looked into including the 2 .a files
        <packagedDependencies>
            <packagedDependency>libWebp.a</packagedDependency>
            <packagedDependency>libFlurryAnalytics.a</packagedDependency>
        </packagedDependencies>
    I put the 2 files into my ane build folder and into my adt command line, but when I try to build the app I get an duplicate symbol error... so i took them out.
    \o/

  • How to use Terminal with KeySpan USB serial adaptor cable?

    I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
    Thanks so much, Jason Sjobeck

    Hi, Jason. Welcome to the Discussions.
    You wrote: "All feedback is most appreciated."OK.
    1. Have you considered discussing this with Keyspan Support?
    2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
    3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
    Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
    It appears your inquiry seems to be a somewhat esoteric topic.
    4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
    5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
    • This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • How to use variables with

    I need to get the number of lines in internal table, which would
    be easy, using DESCRIBE TABLE itab LINES lines. But the problem
    is, that I get the name of this internal table in the field of
    another internal table, so I have to use the name of internal
    table as variable, but I don't know how to use variables with
    DESCRIBE TABLE (or if this is possible).

    Hi,
    REPORT ZPRUEBA782 .
    define two tables with diferent structures.
    data: begin of table1 occurs 0,
    registro type i,
    end of table1.
    data: begin of table2 occurs 0,
    registro type i,
    repid like sy-repid,
    end of table2.
    data: rows type i.
    start-of-selection.
    fill them with data
    do 1000 times.
    table1-registro = sy-tabix.
    append table1.
    enddo.
    do 1757 times.
    table2-registro = sy-tabix.
    table2-repid = sy-repid.
    append table2.
    enddo.
    call a form that receives as input the table and returns the number
    of rows as output.
    perform howmanyrows tables table2 changing rows.
    break-point. "evaluate the number of rows
    perform howmanyrows tables table1 changing rows.
    break-point. "evaluate the number of rows
    end-of-selection.
    form howmanyrows tables itable changing rows.
    rows = 0.
    loop at itable.
    add 1 to rows.
    endloop.
    endform.
    You can try it if you don't find a better solution.
    Cheers,
    Chaitanya.

  • How to Use Gmail With Apple's Mail?

    Answer:
    Now Itis not a Problem, Please go to this link and know how to solve this problem, Ihave configuir this in my mac pro. Have enjoy.
    http://picturemuseum.blogspot.com/2011/08/how-to-use-gmail-with-apple-mail.html
    http://mobilesuggestion.blogspot.com/2011/08/how-to-use-gmail-with-apples-mail.h tml

    I notice that it's possible to have sticky posts in these forums. See
    http://forum.java.sun.com/forum.jspa?forumID=534
    the Concurrency forum for an example. Posting a link to the FAQ in a sticky post might reduce the number of FAQs asked here by maybe 1%? Or posts like this one might do well as a sticky?

  • How to use Count with Date Parameters

    Hello,
    I am having issues using the Count() function in conjunction with date parameters.
    This is a Siebel report and in my report I have 2 date parameters(From Date, To Date). In a nutshell I am basically trying to count Opportunities that has a start date within the given date period. However I don't see a reasonable way to put my date parameters within the Count() function. The reason being is that I need to have a huge chunk of code to convert the dates into a common format that can be compared, and it won't even fit within the code block in my rtf template. I am not even sure how to put multiple conditional statements inside a Count() function since all the examples I have seen are very simple.
    Anyone have a suggestion on how to use Count() with date parameters?
    Thanks.

    Any chance you can get the date formats in the correct format from siebel?
    I don't know Siebel - so I can't help you with that. If you get the correct format it is just
    <?count(row[(FromDate>=date) and  (date<=ToDate))?>
    Otherwise the approach would probably need to use string function to get year/monthd/day from the date
    and store it into a varialbe and compare later the same way
    <?variable@incontext:from; ....?>
    <?variable@incontext:to; ...?>
    <?count(row[($from>=date) and  (date<=$to))?>
    Potentially you can use the date functions such as xdofx:to_date to do the conversion
    [http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481158.htm]
    But I am not sure if they are available in your siebel implementation.
    Hope that helps

  • Help me!! How to use JavaScript with JSP ??

    I am using JDeveloper and I created a screen in JSP which uses a bean for database connectivity and retriving info onto the page.
    The page has a ListBox where list items are populated from the database.My requirement is
    whenever the list is changed the page shuold be refreshed with the selected item info.
    I tried to use 'JavaScript' for triggering the event with 'onChange' event of the ListBox.But the event is not getting invoked. I think JavaScript is not working with JSP.
    Please help me with how to Use javaScript with JSP or any other alternative where I can meet my requirement.
    I have one more question...I have gone through the JSP samples in OTN and I am trying do download the sample 'Travel servlet' which show list of countries...etc
    I have also gone through the 'readme' but I don't know how to extract .jar file.
    I would be great if you could help me in this.
    Thanks!!
    Geeta
    null

    We have a similar need. We have used Cold Fusion to display data from Our Oracle Database. We have a simple SElect Box in HTML populated with the oracle data. When someone selects say the State of Pennsylvania. then we have an On change event that runs a Javascript to go get all the cities in Pennsylvania.
    Proble we are having is that inorder for the Javascript to work , we currently have to send all the valid data.
    Do you know of any way to dynamically query the the Oracle database in Javascript

  • How to use assert with wireless toolkit?

    Hi,
    I am trying to find out how to use assert with wireless toolkit. I have found that I need to pass "-source 1.4" to the java compiler. But I can't find any documentation on how to do it.
    I'm using J2ME Wireless Toolkit 2.2.
    thanks
    Ludde

    Here's a quote from an article on Java World at http://www.javaworld.com/javaworld/jw-11-2001/jw-1109-assert.html
    "To support the new assertion facility in J2SE 1.4, the Java platform adds the keyword assert to the language, an AssertionError class, and a few additional methods to java.lang.ClassLoader."
    So I really think it's part of 1.4.

  • How to use setSoTimeOut() with socket ??

    HI All!
    I eagerly need to know how to use setSoTimeOut() with socket (on server side).
    Actually the scenario is that My Server accepts connection and waits for connected client to send data to it. I WANT TO KEEP, IF CLIENT DOENS'T SENDS ANY DATA TO SERVER WITHIN 5 min. THEN SERVER MUST CLOSE THE CONNECTION, BUT IF SERVER RECEIVES STILL A BYTE FROM THE CLIENT WITHIN 5 mins., THE SERVER MUST RESET CHECKING TIME OUT FOR NEXT 5 MINUTES.
    How can i do that??
    Any help with example will be appreciated!!
    Thanx in advance

    you'd have to do something like this:
    (this is all assuming you want to read Strings from the socket. setSoTimeout works for any read() call to the InputStream associated with the Socket)
    ServerSocket ss = new ServerSocket(myPort);
    Socket s = ss.accept();
    s.setSoTimeout(5*60*1000); // 5 mins * 60 secs * 1000ms
    BufferedReader in = new BufferedReader(new InputStreamReader(s.getInputStream()));
    boolean running = true;
    while(running)
    try
    String readIn = in.readLine();
    // do whatever you want with the data read
    catch(SocketTimeoutException)
    running = false;
    Now. That's what I think needs to be done. I don't have Java on the machine I'm currently on, so I can't test/verify it, but it goes something like that.
    Good luck,
    Radish21

Maybe you are looking for