How to use File Adapter to transport files

Hi,
Can i use File Adapter Additional Files settings to Transfer files from one system to other without conversion?
File Adapter's Additional Files documentation says "additional attachments require a receiver that can process them". In my case receiver is also
File Adapter.
Please let me know if there is any other way to achive this.
Thanks in Advance
Jayant

Hi Jayant -
Here is the link to the documentation related to this:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Notice in "Rules for Additional Files":
"Messages with additional attachments require a receiver that can process them."
Currently, the receiver file adapter does not support the processing of attachments.
Regards,
Jin

Similar Messages

How to use utl_ftp package to transfer files from one system to another

Hi all,
How to use utl_ftp package to transfer files from one system to another using plsql procedure .
I failed to find the appropriate document ,kindly help me .
Thanks,
P Prakash

prakash wrote:
I am sorry tell you, this blog is not enough to for me.It's not a blog, it's Chris' website where you download the package from. Once you download the package and unrar it, then the package spec gives instructions (and I think there's instructions on how to install it too).
Kindly let me know if there is any oracle documentation for this .It's not an Oracle created package, it was created by Chris. It's based around the UTL_TCP package if you really want to get into the nitty gritty of how it works, but I don't think you do.

File Adapter not writing file when processed from one node in a clustered environment

In our environment, we have 4 server nodes running. We are using a file adapter to write file to a location in the server. the adapter is writing files when its processing data in all nodes except one.
Below is the JCA File
<connection-factory location="eis/FileAdapter" adapterRef=""/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="/data/prd"/>
<property name="FileNamingConvention" value="Sample.dat"/>
<property name="Append" value="true"/>
</interaction-spec>
</endpoint-interaction>
the File Adapter health is running OK. What would be the potential cause

In our environment, we have 4 server nodes running. We are using a file adapter to write file to a location in the server. the adapter is writing files when its processing data in all nodes except one.
Below is the JCA File
<connection-factory location="eis/FileAdapter" adapterRef=""/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="/data/prd"/>
<property name="FileNamingConvention" value="Sample.dat"/>
<property name="Append" value="true"/>
</interaction-spec>
</endpoint-interaction>
the File Adapter health is running OK. What would be the potential cause

File adapter with empty files!

Hi guys,
My scenario is: File -> XI (BPM) -> JDBC
Under BPM I have a fork with two parallel receivers correlated and two sender file adapters for that. Those senders also have file conversion (.seq file to XML).
My problem is: in case of files coming empty, is it possible that senders file adapter generates error during file conversion? And/or generates errors during correlations?
If so, "I wouldnt like", because after receive these two files I have a switch to check if the file(s) coming empty and a control step to terminate the process in case of true. But this only works if no errors have occurred on the earlier steps!
At this moment I cant test it, so Im asking If anyone has faced an issue like this one?
Thanks in advance,
Ricardo.

Hi,
Which SP are you on?
Before Sp19 on XI 3.0 and SP10 on Pi, Empty Files are ignored by XI. The file adapter picks the file and if it is a empty file ( a zero byets file ) the file does not create a message at all for the file.
From Sp19, the file adapter has options that allow you to decide how to process the empty file. You can create an error message etc.
Regards
Bhavesh

File Adapter not processing Files which has COMMA in it

Hi Experts,
I am working on Project in SOA 11.1.1.6.
I am trying to process a file which has comma in it. for eg - XXXXXXX-XX_XX_XXX11,99.pdf
I am picking the file using file adapter from SOURCE directory and using another file adapter to WRITE to destination directory. Polling processing is working fine.
I am picking the file from SOURCE directory as ATTACHMENT and WRITING to DESTINATION folder through File Adapter
While doing file WRITE its failing. While reading the file the values of Content Type, Character Set and Encoding are NULL for the ATTACHMENT as they are optional properties.
The error I am getting while File WRITE is
<remoteFault>
<part name="summary">
<summary>java.lang.RuntimeException: Failed to decode properties string att.encoding=null,att.charset=null,att.contentId=AReadFile/XXXXXXXX_XX_XXX11,99.pdf_1352184009640,att.contentType=null,att.partName=attach</summary>
</part>
<part name="detail">
<detail>1</detail>
</part>
</remoteFault>

Comma is usually treated as a separator/delimiter and hence it is not really common to have comma in filename. I think because of this reason File adapter does not support it (have to cross-verify). If you really have a requirement to read/write files with comma in filename then better log a SR with Oracle support.
Regards,
Anuj

File Adapter : read XML file with data validation and file rejection ?

Hello,
In order to read a XML file with the file adapter, I have defined a XSD that I have imported to my project.
Now the File Adapter reads the file correctly but it does not give an error when:
- the data types are not valid. Ex: dateTime is expected in a node and a string is provided
- the XML file has invalid attributes.
How can I manage error handling for XML files ?
Should I write my own Java XPath function to validate the file after is processed ? (here is an example for doing this : http://www.experts-exchange.com/Web/Web_Languages/XML/Q_21058568.html)
Thanks.

one option is to specify validateXML on the partnerlink (that describes the file adapter endpoint) such as shown here
<partnerLinkBinding name="StarLoanService">
<property name="wsdlLocation"> http://<hostname>:9700/orabpel/default/StarLoan/StarLoan?wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
hth clemens

File Adapter Stores temp file?

I'm assuming a sender file adapter will store a copy of the retrieved file in the OS somewhere. Does anyone know where this file would be stored and does it only exist until the adapter has completed processing of the file?

Sorry folks I don't think I was clear in my original question. All I want to know is when the sender file adapter connects to some remote system to retrieve a file...
1) Does XI physically move the file to the XI box (regardless of the archive/delete/test setting) or does it simply load it in RAM? For the adapter to be able to process the file my assumption is that it has to be loaded somewhere on the XI box.
2) If it physically moves the file to the XI box where does it temporarily place it?
I'm aware of the archive setting and other options for creating local copies. I just want to know the "inner workings" of how the sender file adapter moves the files.

File adapter picking up files with wrong content

Hello, We configured a file adapter to read *.xml files. We also defined the xsd for the files. We expected that the adapter would only pick up files that conform to the xsd. However we found that all *.xml files (even renamed jpeg's) are read. Is this intended behaviour? Or did we miss some configuration setting?
Richard

A short follow-up:
To make matters worse. If I take a completely different file (like the jpeg) and rename it .xml it gets picked up by the file adpater but there is no audit trail of the BPEL process instance. The file is not archived either, so it's completely gone! If I just change one of the elements the file is read and archived. I can also have the file adapter write the file with the wrong content.
I found a reference to a bug. (bug 5926809 or SR 6327165.994) is this related, is it solved?
Richard

How to use the adapter framework sample_ra.

hi..
I have deployed the sample_ra adapter framework code through NWDS. Now how to use the adapter framework into my scenario.Please answer elaborately .How to call this adapter framework while configuring the communication channel.

hi
Follow these links I think it will helps you
http://www.sap-hefte.de/download/dateien/1241/140_leseprobe.pdf
NWDS and generate java proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/32/43d84072378031e10000000a1550b0/content.htm
http://msdn2.microsoft.com/en-us/library/ms944509.aspx
thanks and regards
santosh

How To upload business partner into sap crm using xif Adapter by XML File

HI Guru's,
I got Requirement to upload the business partner information into sap crm system using xif adapters from xml file , please give imformation how can achive this .
Regards,
Naveen Kumar MS

Dear Naveen,
please see the information given in note 448742 General notes on CRM external interfaces!
Hope you can find the information!
Regards, Gerhard

Using PI to move Transport Files

Hi ALL,
we decided to use File transport.
Just a small query can we use PI system to move the .TPZ file we download for Transport from DEV to QA system.
is there any technical complexity involved in doing this .. ? anything illogical .. ?
pls give me u'r suggestions
thanks
Souz

Hi Dominic,
Although it is technically possible, i haven't seen anyone do this.
Assume you want to implement some governance process around your transports, like approvals from managers etc, then it becomes very difficult to manage your scenario in XI.
As and when you download the TPZ file, it wil lbe processed by the sender file adapter to post it to the target file system.
Having said that, it is still possible.
YOu just need to implement a file to file scenario without IR content.
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
But, is it worth the effort, is the question to be asked.
Regards,
Ravi Kanth Talagana

How-to use Excel for the XML file input?

Hello all,
Following our discussion with Gerhard Steinhuber on the very nice tutorial from Horst Schaude , "How to upload mass data via XML File Input" , I am starting this new discussion.
In the comments section of this previous cited tutorial, Rufat Gadirov explains how to use a generated XML from Eclipse instead of your XSD file as your source in Excel.
However, in spite of all the instructions, I am still facing the same issue in Excel when I try to save my file as XML : "The XML maps in this workbook are not exportable".
What I try to do is to create one or more Sales Orders with multiple Items in it from a XML File Input, using excel to enter data.
The part with the File input is working (if I directly upload my file to the webDAV, it creates a sales order instance with multiple items).
The only missing part is the Excel data input that I cannot make work. Any help on this matter would be greatly appreciated.
Here is my XML file that I try to use as a source in Excel before inputing data from Excel:
<?xml version="1.0" encoding="UTF-8"?>
<p:MySalesOrderUploadedIntegrationInputRequest xmlns:p="http://001365xxx-one-off.sap.com/YUUD0G3OY_" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<MessageHeader>
    <CreationDateTime>2015-03-02T12:00:00.000Z</CreationDateTime>
</MessageHeader>
    <List actionCode="01" listCompleteTransmissionIndicator="true" reconciliationPeriodCounterValue="0">
        <MySalesOrderUploaded>
          <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
          <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
          <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
          <MyName languageCode="EN">MyName</MyName>
          <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
          <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
          <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
          <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
            <MyItem>
                <MyItemID>token</MyItemID>
                <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                <MyProductTypeCode>token</MyProductTypeCode>
                <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                <MyNetAmount currencyCode="token">0.0</MyNetAmount>
            </MyItem>
        </MySalesOrderUploaded>
        <MySalesOrderUploaded>
          <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
          <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
          <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
          <MyName languageCode="EN">MyName</MyName>
          <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
          <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
          <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
          <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
            <MyItem>
                <MyItemID>token</MyItemID>
                <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                <MyProductTypeCode>token</MyProductTypeCode>
                <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                <MyNetAmount currencyCode="token">0.0</MyNetAmount>
            </MyItem>
        </MySalesOrderUploaded>
    </List>
</p:MySalesOrderUploadedIntegrationInputRequest>
Thank you all for your attention.
Best regards.
Jacques-Antoine Ollier

Hello Jacques-Antoine,
I suppose that as you have tried to construct a map from the schema, you have taken the elements from the List level down. In this case I also can't export the map.
But if you take the elements from the level MySalesOrderUploaded down, you'll get the exportable map (screenshots)
Best regards,
Leonid Granatstein

How to use FTP_COMMAND to put a file in the target system

Hi All,
I have the requirement to put an excel file from apllication server to another remote system for this i am using the function modules
1) FTP_CONNECT to connect to the sourece as well as the destination systems --- Here i am able to hit the both systems.
2) for sending the data to the target system i am using FTP_COMMAND by passing the 'put' statement along with the soruce and destinations for the command parameter.
See the bellow code
CONCATENATE 'put' v_fname '
' 'wbrs1\' folder
into cmd separated by space.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
   HANDLE                = dhdl
    command              = cmd
   COMPRESS              = 'N'
VERIFY                =
RFC_DESTINATION       =
IMPORTING
FILESIZE              =
FILEDATE              =
FILETIME              =
tables
    data                  = result
EXCEPTIONS
   TCPIP_ERROR           = 1
   COMMAND_ERROR         = 2
   DATA_ERROR            = 3
   OTHERS                = 4
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
and wbrs1 is the target system and 'Waynesboro DFS' is the folder name i ma passing to the command .
Also I tried with the following statement
CONCATENATE 'put' v_fname '
' dhost folder
into cmd separated by space.
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS,
Dhost is wbrs1.wb.na.webdti.com
And Waynesboro DFS is the folder .
Here i am getting the error as invalid argument.
See the bellow messages from result internal table.
put /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
wbrs1\ Waynesboro DFS
open /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS errno 22: Invalid argument
Please let me know how i can resolve this problem and how can I put this file in the destination system.
Thanks in advance.
Regards,
Venkat

check this code....here data is transferred from SAP to Informatica box..
REPORT zfo_phoenix_acc_reconciliation NO STANDARD PAGE HEADING
                                                MESSAGE-ID zz
                                                LINE-SIZE 255
                                                LINE-COUNT 65.
                        PROGRAM DECLARATION
PROGRAM ID            : ZFO_PHOENIX_ACC_RECONCILIATION
DESCRIPTION           : Phoneix Account Reconcilation Program-Feed
                        Balance sheet account balances from GL
                        3 files needed to be enhanced. The files are " Master
              Attribute File" & "Transaction File(GL Balance)". For
              Master Attribute File, data needs to be retrieved from
              T001, ZDATSRC_T, SKA1, T003, T856. The corresponding
              data from all the tables is downloaded into file
              according to the condition specified. For Transaction
              File, data needs to be retrieved from ZGEIST based on
              Ledger(GG), Record Type(0), Fiscal Year, Period(016).
              Then the current period is used to determine which TSLxx
              & KSLxx needs to be used. Also, the conditions are
              specified in specs which have been used accordingly.
              The final data fetched will need to processed as files
              which neednot be downloaded to Presentation/Application
              server. Instead the files are been FTPed to the
              Informatica Server using FTP. The location where the
              files need to be located is ERC\GLOBALSAP.
                     TABLES
TABLES : ADR6.
                     TYPES
Output File - Master COA(Chart of Account)
TYPES : BEGIN OF ty_coacode ,
         coa_code(20),         "COA Code
         coa_description(50), "COA Description
         field11 TYPE x,       "Line Feed
         END OF ty_coacode.
Output File - Master Account
TYPES : BEGIN OF ty_acctcode ,
         act_code(20),         "GL Account Number
         act_desc(60),         "GL Account Description
         act_act_flag(1),      "Account marked for deletion indicator
         glact_type(1),        "GL Account type
         fi_line(20),          "Corporate Financial Statement Line
         coa_code(20),         "COA Code
         act_defcode(3),       "Account Defination Code
         field11 TYPE x,       "Line Feed
       END OF ty_acctcode.
Output File - Master Entity
TYPES : BEGIN OF ty_entitycode,
         entity_code(12),     "Entity Code
         com_desc(40),        "Company Name
         coa_code(20),        "COA Code
         field11 TYPE x,      "Line Feed
        END OF ty_entitycode.
Output File - Master Attribute
TYPES : BEGIN OF ty_attribcode,
         attrib_code(5),       "Attribute Code
         attrib_value(20),     "Attribute Value
         attrib_desc(60),      "Attribute Description
         field11 TYPE x,       "Line Feed
        END OF ty_attribcode.
Output File - Transaction GL Balance
TYPES : BEGIN OF ty_glbal,
         gl_reccode(2),        "GL Reconciliation Code
         gl_entity(12),        "GL Entity - Company Code
         gl_accnum(20),        "Gl Group Account Number
         site(4),              "Site
         currency_type(6),     "Transaction Currency Code
         year(4) TYPE n,       "Year
         month(2) TYPE n,      "Month
         as_of_date(8),        "Date Account Balance
         tran_cur_amt(21),     "Transaction Currency Amount
         usd_amount(21),       "USD Amount
         racct(20),            "GL Account Number
         zzbewar(20),          "Consolidation Transaction Type
         zzdatsrc(20),         "Data Source
         zzblart(20),          "Document Type
         rassc(20),          "Trading Partner
         field1(20),           "Attribute field1
         field2(20),           "Attribute field2
         field3(20),           "Attribute field3
         field4(20),           "Attribute field4
         field5(20),           "Attribute field5
         field11 TYPE x,       "Line Feed
       END OF ty_glbal.
Output File - Control
TYPES :BEGIN OF ty_globalsap,
        clnt_name(6),          "Client Name
        source_name(12),       "Source Name
        as_of_date(8),         "AS of Date
        time_stamp(6),         "Time Stamp
        time_zone(8),          "Time Zone
        num_of_files(3),       "Number of Files
        num_of_records(9),     "Number of Records
        user_ids(60),          "User ID(s)
        field11 TYPE x,        "Line Feed
       END OF ty_globalsap.
Int'table to hold ZGEIST Data
TYPES : BEGIN OF ty_zgeist_data,
          rldnr    TYPE rldnr,      "Ledger
          rrcty    TYPE rrcty,      "Record Type
          rvers    TYPE rvers,      "Version
          ryear    TYPE gjahr,      "Fiscal Year
          rbukrs   TYPE bukrs,      "Company Code
          racct    TYPE racct,      "Account Number
          robjnr   TYPE gobjnr_r,   "Object Number for objects
          cobjnr   TYPE gobjnr_c,   "Object Number for transaction
          sobjnr   TYPE gobjnr_s,   "Object Number for partner
          rtcur    TYPE rtcur,      "Currency Key
          runit    TYPE meins,      "Base Unit of Measure
          drcrk    TYPE shkzg,      "Debit/Credit Indicator
          rpmax    TYPE rpmax,      "Period
          rzzstagr TYPE stagr,      "Statistical key figure
          zzaltkt TYPE altkt,      "Account Number in Group
          zzdatsrc TYPE zdatsrc,    "Data Source code
          zzbewar TYPE rmvct,      "Transaction Type
          zzblart TYPE blart,      "Document Type
          rassc    TYPE rassc,       "Trading Partner
          zzvbund TYPE rassc,      "Trading Partner
          tslvt    TYPE tslvt9,     "Transactional Currency
          kslvt    TYPE kslvt9,     "Group Currency
        END   OF ty_zgeist_data.
Int'table to hold ZGEIST Error Data based on conditions
TYPES : BEGIN OF ty_zgeist_error_data,
          rldnr    TYPE rldnr,      "Ledger
          rrcty    TYPE rrcty,      "Record Type
          rvers    TYPE rvers,      "Version
          ryear    TYPE gjahr,      "Fiscal Year
          rbukrs   TYPE bukrs,      "Company Code
          robjnr   TYPE gobjnr_r,   "Object Number for objects
          cobjnr   TYPE gobjnr_c,   "Object Number for transaction
          sobjnr   TYPE gobjnr_s,   "Object Number for partner
          rtcur    TYPE rtcur,      "Currency Key
          runit    TYPE meins,      "Base Unit of Measure
          drcrk    TYPE shkzg,      "Debit/Credit indicator
          rpmax    TYPE rpmax,      "Period
        END   OF ty_zgeist_error_data.
                     FIELD SYMBOLS
FIELD-SYMBOLS : <fs> TYPE ANY.
                     CONSTANTS
DATA : c_selected    TYPE c VALUE 'X', "Field for constant value 'X'
       c_y           TYPE c VALUE 'Y', "For Acc marked for deletion
       c_n           TYPE c VALUE 'N', "For Acc not marked for deletion
       c_a           TYPE c VALUE 'A', "For GL Account type Asset
       c_l           TYPE c VALUE 'L', "For GL Account type Liability
       c_q           TYPE c VALUE 'Q', "For GL Account type Equity
       c_r           TYPE c VALUE 'R', "For GL Account type Revenue
       c_e           TYPE c VALUE 'E', "For GL Account type Expense
       c_t           TYPE c VALUE 'T', "For GL Account type
       c_userid(60) TYPE c ,
       c_curtp       TYPE curtp VALUE '10', "Currency type
       c_curtp1      TYPE curtp VALUE '30', "Currency type
       c_rassc(5)    TYPE c VALUE 'RASSC', "Trading Partner
       c_dtsrce(6)   TYPE c VALUE 'DTSRC', "Data Source
       c_sacct(5)    TYPE c VALUE 'SACCT', "GL Account
       c_docty(5)    TYPE c VALUE 'DOCTY', "Document Type
       c_trxtp(5)    TYPE c VALUE 'TRXTP', "Transaction Type
       c_tradptn(15) TYPE c VALUE 'Trading Partner', "Trading Partner
       c_datsrc(11) TYPE c VALUE 'Data Source',      "Data Source
       c_glacc(10)   TYPE c VALUE 'GL Account',       "GL Account
       c_doctyp(13) TYPE c VALUE 'Document Type',    "Document Type
       c_trantyp(16) TYPE c VALUE 'Transaction Type'. "Transaction Type
                     DATA (Simple Fields)
DATA: w_cnt1         TYPE i, "No Of records in output file COA Code
      w_cnt2         TYPE i, "No Of records in output file Account
      w_cnt3         TYPE i, "No Of records in output file Entity
      w_cnt4         TYPE i, "No Of records in output file attribute
      w_cnt5         TYPE i, "No Of records in output file GL Balance
      w_tot_recs     TYPE i, "TOtal number of records downloaded
      w_date         LIKE sy-datum, "System date
      w_timediff     LIKE sy-uzeit, "Time Difference to GMT
      w_timezone(10) TYPE c,       "Time Difference to GMT
      w_file_count(3) TYPE n,       "File Count
      w_period TYPE poper,          "To hold Period Value
      w_year LIKE t009b-bdatj,      "To hold Fiscal Year Value
      w_outfile       TYPE char64, "FTPed file path
      w_hdl           TYPE i.       "Handle for FTP
                     INTERNAL TABLES
Intenal table for GL Account details
DATA: BEGIN OF it_gl_detail OCCURS 0,
          saknr      TYPE saknr,
          txt50_skat TYPE txt50_skat,
          xloev      TYPE xloev,
      END OF it_gl_detail.
DATA: it_company_list LIKE bapi0014_1 OCCURS 0 WITH HEADER LINE,
      it_coacode TYPE STANDARD TABLE OF ty_coacode WITH HEADER LINE,
      it_acctcode TYPE STANDARD TABLE OF ty_acctcode WITH HEADER LINE,
      it_entitycode TYPE STANDARD TABLE OF ty_entitycode
                                        WITH HEADER LINE,
      it_attribcode TYPE STANDARD TABLE OF ty_attribcode
                                        WITH HEADER LINE,
      it_glbal TYPE STANDARD TABLE OF ty_glbal WITH HEADER LINE,
      it_globalsap TYPE STANDARD TABLE OF ty_globalsap WITH HEADER LINE,
      it_t001 TYPE STANDARD TABLE OF t001 WITH HEADER LINE,
      it_zdatsrc TYPE STANDARD TABLE OF zdatsrc_t WITH HEADER LINE,
      it_ska1 TYPE STANDARD TABLE OF ska1 WITH HEADER LINE,
      it_t003 TYPE STANDARD TABLE OF t003 WITH HEADER LINE,
      it_t856 TYPE STANDARD TABLE OF t856 WITH HEADER LINE,
      it_zgeist_data    TYPE STANDARD TABLE OF ty_zgeist_data
                             WITH HEADER LINE,
      it_zgeist_data1   TYPE STANDARD TABLE OF ty_zgeist_data
                             WITH HEADER LINE,
      it_zgeist_data_all TYPE STANDARD TABLE OF zgeist,
      wa_it_zgeist_data1 TYPE ty_zgeist_data,
      wa_it_zgeist_data TYPE zgeist,
      it_zgeist_error_data TYPE STANDARD TABLE OF ty_zgeist_error_data,
      wa_it_zgeist_error_data TYPE ty_zgeist_error_data.
                     SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-009.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-006,
            POSITION POS_LOW.
PARAMETERS :       P_USER(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-007,
            POSITION POS_LOW.
PARAMETERS :       P_PWD(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-008,
            POSITION POS_LOW.
PARAMETERS :       P_HOST(64) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-010,
            POSITION POS_LOW.
SELECT-OPTIONS :   S_EMAIL FOR ADR6-SMTP_ADDR NO INTERVALS.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
-- Password not visible--
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'P_PWD'.
      screen-invisible = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
I N I T I A L I Z A T I O N                                         *
INITIALIZATION.
w_date0(2) = sy-datum4(2).
w_date2(2) = sy-datum6(2).
w_date4(4) = sy-datum0(4).
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
                     START - OF - SELECTION
START-OF-SELECTION.
Geting Company Details
PERFORM get_company_list.
Geting GL Account Details
PERFORM get_gl_acc_detail.
Geting GL Balance Details
PERFORM get_zgeist_data.
                     END - OF - SELECTION
PERFORM process_coacode.
PERFORM process_acctcode.
PERFORM process_entitycode.
PERFORM process_attribcode.
PERFORM process_glbal.
PERFORM process_ftp_file.
IF NOT it_zgeist_error_data[] IS INITIAL.
    PERFORM write_error_report.
ENDIF.
*&      Form GET_COMPANY_LIST
           Form to get Company List                                 *
FORM get_company_list.
CALL FUNCTION 'BAPI_COMPANY_GETLIST'
    TABLES
      company_list = it_company_list.
ENDFORM.                    "GET_COMPANY_LIST
*&      Form GET_GL_ACC_DETAIL
      Form to get the GL Account details                            *
FORM get_gl_acc_detail.
DATA : l_txt50 LIKE skat-txt50,
         l_tabix LIKE sy-tabix.
SELECT saknr xloev
    INTO TABLE it_gl_detail
    FROM ska1
    WHERE ktopl = 'G001'
    AND   ( saknr GE '1000000000' AND saknr LE '4500000000' ).
LOOP AT it_gl_detail.
    l_tabix = sy-tabix.
    SELECT SINGLE txt50
      INTO l_txt50
      FROM skat
      WHERE spras = 'EN'
      AND   ktopl = 'G001'
      AND   saknr = it_gl_detail-saknr.
    it_gl_detail-txt50_skat = l_txt50.
    MODIFY it_gl_detail INDEX l_tabix.
    CLEAR l_txt50.
ENDLOOP.
ENDFORM.                    "GET_GL_ACC_DETAIL
*&      Form PROCESS_COACODE
Form to Populate COA data to Output internal table IT_COACODE *
FORM process_coacode.
it_coacode-coa_code          = text-023.     "GLOBAL.
it_coacode-coa_description   = text-022.     "Global SAP for ERC
it_coacode-field11           = '11'.
APPEND it_coacode.
CLEAR it_coacode.
ENDFORM.                    "PROCESS_COACODE
*&      Form PROCESS_ACCTCODE
Form to Populate Account data to Output Internal table IT_ACCTCODE *
FORM process_acctcode.
DATA:l_saknr(10).
DATA : it_gl_detail2 LIKE it_gl_detail OCCURS 0 WITH HEADER LINE.
IF NOT it_gl_detail[] IS INITIAL.
    it_gl_detail2[] = it_gl_detail[].
    SORT it_gl_detail2 BY saknr.
    DELETE ADJACENT DUPLICATES FROM it_gl_detail2 COMPARING saknr.
ENDIF.
IF NOT it_gl_detail2[] IS INITIAL.
    LOOP AT it_gl_detail2.
      MOVE it_gl_detail2-saknr      TO it_acctcode-act_code.
      MOVE it_gl_detail2-txt50_skat TO it_acctcode-act_desc.
Check GL Account is marked for deletion or not
      IF it_gl_detail2-xloev     = c_selected.
        it_acctcode-act_act_flag = c_n.
      ELSE.
        it_acctcode-act_act_flag = c_y.
      ENDIF.
Determine GL Account type based on GL account number
      l_saknr = it_gl_detail2-saknr.
      SHIFT l_saknr LEFT DELETING LEADING '0'.
      IF l_saknr CP '1*'.
        it_acctcode-glact_type = c_a.
      ELSEIF l_saknr CP '2*'.
        it_acctcode-glact_type = c_l.
      ELSEIF l_saknr CP '3*'.
        it_acctcode-glact_type = c_q.
Start of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
      ELSEIF l_saknr CP '4*'.
        it_acctcode-glact_type = c_l.
End of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
      ELSEIF l_saknr CP '5*'.
        it_acctcode-glact_type = c_r.
      ELSEIF l_saknr CP '6*'.
        it_acctcode-glact_type = c_e.
      ELSEIF l_saknr CP '7*'.
        it_acctcode-glact_type = c_t.
      ENDIF.
      it_acctcode-fi_line      = 'CDR'.
      it_acctcode-coa_code     = 'GLOBAL'.
      it_acctcode-act_defcode = '001'.
      it_acctcode-field11      = '11'.
      APPEND :it_acctcode.
      CLEAR :it_acctcode,it_gl_detail2.
    ENDLOOP.
ENDIF.
ENDFORM.                    "PROCESS_ACCTCODE
*&      Form PROCESS_ENTITYCODE
Form to Populate Entiti data to Output file internal table        *
FORM process_entitycode.
IF NOT it_company_list[] IS INITIAL.
    LOOP AT it_company_list.
      SHIFT it_company_list-company LEFT DELETING LEADING '0'.
      MOVE it_company_list-company TO it_entitycode-entity_code.
      MOVE it_company_list-name1   TO it_entitycode-com_desc.
      it_entitycode-coa_code    = 'GLOBAL'.
      it_entitycode-field11     = '11'.
      APPEND it_entitycode.
      CLEAR : it_company_list,it_entitycode.
    ENDLOOP.
ENDIF.
ENDFORM.                    "PROCESS_ENTITYCODE
*&      Form PROCESS_ATTRIBCODE
    Form to Populate Attribute data to output file internal table   *
FORM process_attribcode.
Getting data from T001.
SELECT * FROM t001 INTO TABLE it_t001.
LOOP AT it_t001.
    MOVE c_rassc TO it_attribcode-attrib_code.
    MOVE it_t001-bukrs TO it_attribcode-attrib_value.
    MOVE c_tradptn TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table ZDATSRC_T.
SELECT * FROM zdatsrc_t INTO TABLE it_zdatsrc.
LOOP AT it_zdatsrc.
    MOVE c_dtsrce TO it_attribcode-attrib_code.
    MOVE it_zdatsrc-zdatsrc TO it_attribcode-attrib_value.
    MOVE c_datsrc TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table SKA1.
SELECT * FROM ska1 INTO TABLE it_ska1.
LOOP AT it_ska1.
    MOVE c_sacct TO it_attribcode-attrib_code.
    MOVE it_ska1-saknr TO it_attribcode-attrib_value.
    MOVE c_glacc TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table T003.
SELECT * FROM t003 INTO TABLE it_t003.
LOOP AT it_t003.
    MOVE c_docty TO it_attribcode-attrib_code.
    MOVE it_t003-blart TO it_attribcode-attrib_value.
    MOVE c_doctyp TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table T856.
SELECT * FROM t856 INTO TABLE it_t856.
LOOP AT it_t856.
    MOVE c_trxtp TO it_attribcode-attrib_code.
    MOVE it_t856-trtyp TO it_attribcode-attrib_value.
    MOVE c_trantyp TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
ENDFORM.                    "PROCESS_ATTRIBCODE
*&      Form PROCESS_GLBAL
Form to Populate GL Balance data to Output file internal table    *
FORM process_glbal.
DATA : l_ctran_amt(21),
         l_cusd_amt(21).
LOOP AT it_zgeist_data INTO wa_it_zgeist_data1.
*Start of change by 501030559 on 11/04/2005
   it_glbal-gl_reccode = '04'.
     it_glbal-gl_reccode = '05'.
*End of change by 501030559 on11/04/2005
    it_glbal-gl_entity = wa_it_zgeist_data1-rbukrs.
    it_glbal-gl_accnum = wa_it_zgeist_data1-zzaltkt.
    it_glbal-site       = 'ERC'.
    it_glbal-currency_type = wa_it_zgeist_data1-rtcur.
    it_glbal-year = w_year.
    it_glbal-month = w_period.
    it_glbal-as_of_date = w_date.
    l_ctran_amt = wa_it_zgeist_data1-tslvt.
Put sign to left side of the value
    IF l_ctran_amt LT 0.
      TRANSLATE l_ctran_amt USING ' 0'.
      CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
        CHANGING
          value = l_ctran_amt.
    ELSE.
Trailing Zero's to the value
      SHIFT l_ctran_amt RIGHT DELETING TRAILING space.
      TRANSLATE l_ctran_amt USING ' 0'.
      REPLACE '0' WITH '' INTO l_ctran_amt.
    ENDIF.
    it_glbal-tran_cur_amt = l_ctran_amt.
    l_cusd_amt = wa_it_zgeist_data1-kslvt.
Put Sign to leftside of the value
    IF l_cusd_amt LT 0.
      TRANSLATE l_cusd_amt USING ' 0'.
      CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
        CHANGING
          value = l_cusd_amt.
    ELSE.
Trailing Zero's to the value
      SHIFT l_cusd_amt RIGHT DELETING TRAILING space.
      TRANSLATE l_cusd_amt USING ' 0'.
      REPLACE '0' WITH '' INTO l_cusd_amt.
    ENDIF.
    it_glbal-usd_amount = l_cusd_amt.
    it_glbal-racct   = wa_it_zgeist_data1-racct.
    it_glbal-zzbewar = wa_it_zgeist_data1-zzbewar.
    it_glbal-zzdatsrc = wa_it_zgeist_data1-zzdatsrc.
    it_glbal-zzblart = wa_it_zgeist_data1-zzblart.
    it_glbal-rassc = wa_it_zgeist_data1-rassc.
    it_glbal-field11 = '11'.
    APPEND it_glbal.
    CLEAR : wa_it_zgeist_data1, it_glbal.
ENDLOOP.
ENDFORM.                    "PROCESS_GLBAL
*&      Form PROCESS_GLOBALSAP
   Form to Populate COntrol data to Output file internal table      *
FORM process_globalsap.
DATA :l_total(9),
        l_len(3) type c.
Logic to get Time Zone
w_timediff = sy-tzone.
IF sy-tzone LT '0'.
    w_timediff = sy-tzone * -1.
    CONCATENATE 'GMT-' w_timediff(4) INTO w_timezone.
ELSE.
    w_timediff = sy-tzone.
    CONCATENATE 'GMT+' w_timediff(4) INTO w_timezone.
ENDIF.
LOOP AT S_EMAIL.
    CONCATENATE C_USERID S_EMAIL-LOW ',' INTO C_USERID.
ENDLOOP.
l_len = strlen( c_userid ).
l_len = l_len - 1.
c_userid = c_userid+0(l_len).
it_globalsap-clnt_name    = 'ERC'.
it_globalsap-source_name = 'GLOBALSAP'.
it_globalsap-as_of_date   = w_date.
it_globalsap-time_stamp   = sy-uzeit.
it_globalsap-time_zone    = w_timezone.
it_globalsap-num_of_files = w_file_count.
MOVE w_tot_recs TO l_total.
SHIFT l_total RIGHT DELETING TRAILING space.
TRANSLATE l_total USING ' 0'.
it_globalsap-num_of_records = l_total.
it_globalsap-user_ids = c_userid.
it_globalsap-field11 = '11'.
APPEND it_globalsap.
CLEAR it_globalsap.
ENDFORM.                  "PROCESS_GLOBALSAP
*&      Form COUNT_RECORDS
Form to count total number of records Downlaoded                   *
FORM count_records.
DESCRIBE TABLE it_coacode    LINES w_cnt1.
DESCRIBE TABLE it_acctcode   LINES w_cnt2.
DESCRIBE TABLE it_entitycode LINES w_cnt3.
DESCRIBE TABLE it_attribcode LINES w_cnt4.
DESCRIBE TABLE it_glbal      LINES w_cnt5.
w_tot_recs = w_cnt1 + w_cnt2 + w_cnt3 + w_cnt4 + w_cnt5.
ENDFORM.                    "COUNT_RECORDS
*&      Form get_zgeist_data
Form used to fetch data from ZGEIST table for the GL BAL file
FORM get_zgeist_data .
PERFORM get_period_year.
SELECT * INTO TABLE it_zgeist_data_all
           FROM zgeist
           WHERE rldnr EQ 'GG'
           AND   ryear EQ w_year
           AND   rrcty EQ 0
           AND   rpmax EQ '016'
           AND ( zzaltkt GE '1000000000' AND zzaltkt LE '4500000000' )
           AND   rzzstagr = space.
sort it_zgeist_data_all by rbukrs rldnr zzaltkt racct
                             zzdatsrc zzbewar zzblart rtcur rassc.
LOOP AT it_zgeist_data_all INTO wa_it_zgeist_data.
    IF wa_it_zgeist_data-zzaltkt EQ space.
      wa_it_zgeist_error_data-rldnr = wa_it_zgeist_data-rldnr.
      wa_it_zgeist_error_data-rrcty = wa_it_zgeist_data-rrcty.
      wa_it_zgeist_error_data-rvers = wa_it_zgeist_data-rvers.
      wa_it_zgeist_error_data-ryear = wa_it_zgeist_data-ryear.
      wa_it_zgeist_error_data-rbukrs = wa_it_zgeist_data-rbukrs.
      wa_it_zgeist_error_data-robjnr = wa_it_zgeist_data-robjnr.
      wa_it_zgeist_error_data-cobjnr = wa_it_zgeist_data-cobjnr.
      wa_it_zgeist_error_data-sobjnr = wa_it_zgeist_data-sobjnr.
      wa_it_zgeist_error_data-rtcur = wa_it_zgeist_data-rtcur.
      wa_it_zgeist_error_data-runit = wa_it_zgeist_data-runit.
      wa_it_zgeist_error_data-drcrk = wa_it_zgeist_data-drcrk.
      wa_it_zgeist_error_data-rpmax = wa_it_zgeist_data-rpmax.
      APPEND wa_it_zgeist_error_data TO it_zgeist_error_data.
    ELSE.
      it_zgeist_data1-rbukrs   = wa_it_zgeist_data-rbukrs.
      it_zgeist_data1-rldnr    = wa_it_zgeist_data-rldnr.
      it_zgeist_data1-zzaltkt = wa_it_zgeist_data-zzaltkt.
      it_zgeist_data1-racct    = wa_it_zgeist_data-racct.
      it_zgeist_data1-zzdatsrc = wa_it_zgeist_data-zzdatsrc.
      it_zgeist_data1-zzbewar = wa_it_zgeist_data-zzbewar.
      it_zgeist_data1-zzblart = wa_it_zgeist_data-zzblart.
      it_zgeist_data1-rassc = wa_it_zgeist_data-rassc.
      it_zgeist_data1-rtcur    = wa_it_zgeist_data-rtcur.
      PERFORM get_tslvt_kslvt_values USING w_period.
      COLLECT it_zgeist_data1.
    ENDIF.
    CLEAR : wa_it_zgeist_data, wa_it_zgeist_error_data,
            it_zgeist_data1.
ENDLOOP.
it_zgeist_data[] = it_zgeist_data1[].
ENDFORM.                    " get_zgeist_data
*&      Form write_error_report
Form used to display error data for the GL BAL fetched data
FORM write_error_report .
DATA : l_text(80) TYPE c.
CASE w_period.
    WHEN '001' OR '01'.
      l_text = text-e01.
    WHEN '002' OR '02'.
      l_text = text-e02.
    WHEN '003' OR '03'.
      l_text = text-e03.
    WHEN '004' OR '04'.
      l_text = text-e04.
    WHEN '005' OR '05'.
      l_text = text-e05.
    WHEN '006' OR '06'.
      l_text = text-e06.
    WHEN '007' OR '07'.
      l_text = text-e07.
    WHEN '008' OR '08'.
      l_text = text-e08.
    WHEN '009' OR '09'.
      l_text = text-e09.
    WHEN '010' OR '10'.
      l_text = text-e10.
    WHEN '011' OR '11'.
      l_text = text-e11.
    WHEN '012' OR '12'.
      l_text = text-e12.
    WHEN '013' OR '13'.
      l_text = text-e13.
    WHEN '014' OR '14'.
      l_text = text-e14.
    WHEN '015' OR '15'.
      l_text = text-e15.
    WHEN '016' OR '16'.
      l_text = text-e16.
ENDCASE.
SKIP 2.
WRITE:/45 text-h01 COLOR COL_HEADING.
SKIP 2.
FORMAT COLOR 4.
WRITE:/(234) sy-uline.
WRITE:/1   sy-vline,
         2   text-h02,
         9   sy-vline,
         10 text-h03,
         19 sy-vline,
         20 text-h04,
         28 sy-vline,
         29 text-h05,
         41 sy-vline,
         42 text-h06,
         49 sy-vline,
         50 text-h07,
         69 sy-vline,
         70 text-h08,
         89 sy-vline,
         90 text-h09,
         109 sy-vline,
         110 text-h10,
         119 sy-vline,
         120 text-h11,
         130 sy-vline,
         131 text-h12,
         144 sy-vline,
         145 text-h13,
         152 sy-vline,
         153 text-h14,
         234 sy-vline.
WRITE:/(234) sy-uline.
FORMAT COLOR OFF.
LOOP AT it_zgeist_error_data INTO wa_it_zgeist_error_data.
    FORMAT COLOR 2.
    WRITE:/1   sy-vline,
           4   wa_it_zgeist_error_data-rldnr,
           9   sy-vline,
           13 wa_it_zgeist_error_data-rrcty,
           19 sy-vline,
           22 wa_it_zgeist_error_data-rvers,
           28 sy-vline,
           32 wa_it_zgeist_error_data-ryear,
           41 sy-vline,
           42 wa_it_zgeist_error_data-rbukrs,
           49 sy-vline,
           50 wa_it_zgeist_error_data-robjnr,
           69 sy-vline,
           70 wa_it_zgeist_error_data-cobjnr,
           89 sy-vline,
           90 wa_it_zgeist_error_data-sobjnr,
           109 sy-vline,
           112 wa_it_zgeist_error_data-rtcur,
           119 sy-vline,
           123 wa_it_zgeist_error_data-runit,
           130 sy-vline,
           135 wa_it_zgeist_error_data-drcrk,
           144 sy-vline,
           147 wa_it_zgeist_error_data-rpmax,
           152 sy-vline,
           153 l_text,
           234 sy-vline.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/(234) sy-uline.
ENDFORM.                    " write_error_report
*&      Form get_tslvt_kslvt_values
Form used to get TSLxx & KSLxx values for the period fetched
FORM get_tslvt_kslvt_values USING period.
FIELD-SYMBOLS : <f1> TYPE ANY,
                 <f2> TYPE ANY.
DATA : l_tslvt_val(25) VALUE 'wa_it_zgeist_data-tsl',
        l_kslvt_val(25) VALUE 'wa_it_zgeist_data-ksl',
        l_tslvt TYPE tslvt9,
        l_kslvt TYPE kslvt9,
        l_period TYPE poper.
clear l_period.
l_period = period.
DO l_period TIMES.
      CONCATENATE l_tslvt_val l_period+1(2) INTO l_tslvt_val.
      CONCATENATE   l_kslvt_val l_period+1(2) INTO l_kslvt_val.
    ASSIGN (l_tslvt_val) TO <f1>.
    l_tslvt = <f1>.
    it_zgeist_data1-tslvt = it_zgeist_data1-tslvt + l_tslvt.
    ASSIGN (l_kslvt_val) TO <f2>.
    l_kslvt = <f2>.
    it_zgeist_data1-kslvt = it_zgeist_data1-kslvt + l_kslvt.
    l_period = l_period - 1.
    clear : l_tslvt, l_kslvt, l_tslvt_val, l_kslvt_val.
    l_tslvt_val = 'wa_it_zgeist_data-tsl'.
    l_kslvt_val = 'wa_it_zgeist_data-ksl'.
    if l_period = 0.
      exit.
    endif.
ENDDO.
ENDFORM.                    "get_tslvt_kslvt_values
*&      Form process_ftp_file
Form used to connect & disconnect to Informatica Server using FTP
Also, used to transfer files to the Informatica location
--> p1        text
<-- p2        text
FORM process_ftp_file .
DATA: l_slen     TYPE i,
        l_error,
        l_pwd(30) TYPE c.
CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
             c_key TYPE i              VALUE 26101957.
l_error = 0.
connect to ftp server
l_pwd = p_pwd.
l_slen = STRLEN( l_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = l_pwd
      sourcelen   = l_slen
      key         = c_key
    IMPORTING
      destination = l_pwd.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Connect to FTP Server'.
To Connect to the Server using FTP
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = p_user
      password        = l_pwd
      host            = p_host
      rfc_destination = c_dest
    IMPORTING
      handle          = w_hdl
    EXCEPTIONS
      OTHERS          = 1.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR : w_outfile, w_file_count.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_COACODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ACCTCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_acctcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ENTITYCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_entitycode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ATTRIBCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_attribcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/ERC_GLOBALSAP_GLBAL' TO w_outfile.
PERFORM download_to_ftp TABLES it_glbal USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile, w_tot_recs.
PERFORM count_records.
PERFORM process_globalsap.
MOVE 'ERC/GLOBALSAP/C_ERC_GLOBALSAP' TO w_outfile.
PERFORM download_to_ftp TABLES it_globalsap USING w_outfile.
To disconnect the FTP
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      handle = w_hdl.
To disconnect the RFC Connection
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    EXPORTING
      destination = c_dest
    EXCEPTIONS
      OTHERS      = 1.
ENDFORM.                    " process_ftp_file
*&      Form download_to_ftp
Form to put the files in the Informatica Location using FTP
Path is ERC\GLOBALSAP\<filename>
FORM download_to_ftp TABLES it_tab
                     USING l_string TYPE char64.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      handle         = w_hdl
      fname          = l_string
      character_mode = 'X'
    TABLES
      text           = it_tab[]
    EXCEPTIONS
      tcpip_error    = 1
      command_error = 2
      data_error     = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
            RAISING invalid_output_file.
ENDIF.
ENDFORM.                    " download_to_ftp
*&      Form get_period_year
Form to fill the Period & Year based on the Sy-datum
FORM get_period_year .
DATA : l_month(2) TYPE c,
         l_day(2)   TYPE c,
         l_year(4) TYPE c.
l_year = sy-datum+0(4).
l_month = sy-datum+4(2).
l_day   = sy-datum+6(2).
CASE l_month.
    WHEN '01'.
      IF l_day <= '15'.
        w_period = '12'.
        w_year = l_year - 1.
      ELSE.
        w_period = '1'.
        w_year = l_year.
      ENDIF.
    WHEN '02'.
      IF l_day <= '15'.
        w_period = '1'.
        w_year = l_year.
      ELSE.
        w_period = '2'.
        w_year = l_year.
      ENDIF.
    WHEN '03'.
      IF l_day <= '15'.
        w_period = '2'.
        w_year = l_year.
      ELSE.
        w_period = '3'.
        w_year = l_year.
      ENDIF.
    WHEN '04'.
      IF l_day <= '15'.
        w_period = '3'.
        w_year = l_year.
      ELSE.
        w_period = '4'.
        w_year = l_year.
      ENDIF.
    WHEN '05'.
      IF l_day <= '15'.
        w_period = '4'.
        w_year = l_year.
      ELSE.
        w_period = '5'.
        w_year = l_year.
      ENDIF.
    WHEN '06'.
      IF l_day <= '15'.
        w_period = '5'.
        w_year = l_year.
      ELSE.
        w_period = '6'.
        w_year = l_year.
      ENDIF.
    WHEN '07'.
      IF l_day <= '15'.
        w_period = '6'.
        w_year = l_year.
      ELSE.
        w_period = '7'.
        w_year = l_year.
      ENDIF.
    WHEN '08'.
      IF l_day <= '15'.
        w_period = '7'.
        w_year = l_year.
      ELSE.
        w_period = '8'.
        w_year = l_year.
      ENDIF.
    WHEN '09'.
      IF l_day <= '15'.
        w_period = '8'.
        w_year = l_year.
      ELSE.
        w_period = '9'.
        w_year = l_year.
      ENDIF.
    WHEN '10'.
      IF l_day <= '15'.
        w_period = '9'.
        w_year = l_year.
      ELSE.
        w_period = '10'.
        w_year = l_year.
      ENDIF.
    WHEN '11'.
      IF l_day <= '15'.
        w_period = '10'.
        w_year = l_year.
      ELSE.
        w_period = '11'.
        w_year = l_year.
      ENDIF.
    WHEN '12'.
      IF l_day <= '15'.
        w_period = '11'.
        w_year = l_year.
      ELSE.
        w_period = '12'.
        w_year = l_year.
      ENDIF.
ENDCASE.
ENDFORM.                    " get_period_year

How to use mxml in a jsp file?

I'm trying to use flex in a .jsp file. I followed the
suggestion that I use the Flex 2 Tag library as suggested by this
link:
http://labs.adobe.com/wiki/index.php/Flex_2_Tag_Library_for_JSP#Download_and_Installation
but I couldn't find it. I also downloaded LiveCycle Data Services
ES but couldn't find the flex-bootstrap.jar.
I have a simple example:

Use the <mxml> tag to insert a Flex application in an
existing JSP page. The following example shows the <mxml> tag
with the source attribute to include an external MXML file:
<mm:mxml source="CustomerServiceChat.mxml"/>
Alternatively, you can use the <mxml> tag with inline
MXML source code, as the following example shows:
<mm:mxml>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns="*">
<mx:Text label="Hello World">
</mx:Application>
</mm:mxml>
I also added the following code in my web.xml:
<taglib>
<taglib-uri>FlexTagLib</taglib-uri>
<taglib-location>/WEB-INF/lib/flex-bootstrap.jar</taglib-location>
</taglib>
and obviously I get an error because I don't have the
flex-bootstrap.jar file. Please let me know how this can be
corrected. Thanks in advance!

Adobe Newsbot hopes that the following resources helps you.
NewsBot is experimental and any feedback (reply to this post) on
its utility will be appreciated:
Adobe - Developer Center : Flex quick start guide for PHP
developers:
Apr 30, 2007 ... In this example, I changed the result data
type to XML with E4X support by setting .... In Flex you would
download a file using this code:
Link:
http://www.adobe.com/devnet/flex/articles/php_getstarted.html
2d. Tutorial - Flex 3 Getting Started - Adobe Learning
Resources:
See Calling XML Web Services over the Web Using the Web
Service References ... For information on integrating PHP and Flex
using AMF to encode the data,
Link:
http://learn.adobe.com/wiki/display/Flex/2d.+Tutorial
Mike Potter: Flex and PHP - A simple sample:
I have other example with PHP and MySql and give the same
error, and a example .... Flex Data Services... I choose None (???)
because I work with php and
Link:
http://blogs.adobe.com/mikepotter/2006/02/flex_and_php_a_1.html
Adobe - Developer Center : Transmitting data between Flex and
PHP:
Sep 4, 2007 ... Now that the user interface is set up and
ready to go you can add the HTTP services to go ask for the data
from the PHP code. In Flex you
Link:
http://www.adobe.com/devnet/flex/articles/flex_php_json.html
Integrating Adobe Flex and PHP:
Mar 1, 2006 ... The first step is to download Flex Builder
2.0 from the Adobe labs ... For example, you could use this same
PHP script to pass data to a
Link:
http://devzone.zend.com/article/11-Integrating-Adobe-Flex-and-PHP
Disclaimer: This response is generated automatically by the
Adobe NewsBot based on Adobe
Community
Engine.

How to use an install.xpi configuration file to set up email data

Manual setup of my email account failed because Thunderbird searches for my domain name and it is not in its database. So my host provider gave me an auto-config file for Thunderbird for my email account, called install.xpi - But how do I use this file? I can't double-click on it in Windows to do anything. In Thunderbird program it wants to create a new account but I can't do anything else in it like file import.
How to use install.xpi file so it creates my email account with the proper setup variables? Thanks for your help.

Start Thunderbird, close the wizard, goto the Tools menu (alt+T) select add-ons
There's a tiny button to the left of the search window. Click this and select Install Add-on From File and Navigate to your xpi file, select it, and off you go.

How to use File Adapter to transport files

Similar Messages

Maybe you are looking for