How to use $FLEX$ for DFF segment
We have below requirement for “Add'l Salary Admin. Details” DFF.
we have three segments:
Current Additional Amount -first segment
Additional Allowance Change % - second segment
New Additional Allowance - third segment
e.g.
Now first segment has fixed value, Assume it is 2000 AED
And in second segment if value is 3
Then third segment should show the value: 2000 + 2000 * 3/100
Third segment is dependent on segment1 and segment2.
I think, we can achieve this by using $FLEX$
But I need your guide line, how can we do that?
below solution is only possible solution.
Hi,
Keeping the default SQL statement on its place, use table based value set for segment3 which contains all values from 0 to let say 1,000,000 (such that your calculated values falls in the range).
Try it. It segment3 will now calculate on the basis of values of segment1 & 2.
Regards
Ayaz
Thanks for everyone's input.
Similar Messages
-
Should I use flex for my website
Hey, I am having trouble figuring out if I should be using
flex for a site similar to the BBC site:
http://www.bbc.co.uk. I have
started the site in flex but I am running into a lot of problems.
It could be that I am a newbie to Flex, but wanted to make sure if
I should still be going a head with this in Flex. Any advice would
be appreciated.
Thank you,
Vinny"vinny31187" <[email protected]> wrote in
message
news:goaup9$9ta$[email protected]..
> Hey, I am having trouble figuring out if I should be
using flex for a site
> similar to the BBC site:
http://www.bbc.co.uk. I have
started the site in
> flex
> but I am running into a lot of problems. It could be
that I am a newbie to
> Flex, but wanted to make sure if I should still be going
a head with this
> in
> Flex. Any advice would be appreciated.
I would say that if you don't know the answer to that
question, then the
answer is probably no. You need to have a pretty firm
understanding of how
sites like that work under the hood before trying to build
one in Flex. -
How to Use 'uid' for AD Users Without Domain Name For User Log in OAM
How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein -
How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(
The cheap & easy way is to just drag the app to the Trash.
If you want to get all of the associated files use an app deleting app like the free AppCleaner;
http://www.freemacsoft.net/appcleaner/
Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest. -
How to use i for if condition in a for i in loop?
Hi friends,
I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
cursor is
select c1,c2,c3 from table1; -- 100 rows returned.
open cursor
loop
fetch c1,c2,c3 into v1,v2,v3;
for i in 1..3 loop
if 'v'||i between 90 and 100 then
v_grade := 'Excellent';
elsif 'v'||i between 80 and 89 then
elsif 'v'||i between 50 and 59 then
end if;
end loop;
close cursor;
This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
Thanks for any advice in advance!user508774 wrote:
Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
So do not underestimate what can be done in SQL.
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
To create a SQL program with parameters is done by using bind variables. Instead of
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
The following SQL source code should be created:
v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
Where v1 and the others are PL/SQL variables.
That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features. -
Install Sun ONE Directory Server 5,2 & how to use it for authenticate user
Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms". -
How to use parathesis for OR and AND OPERATOR...
oracle 10g
Hi
Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
select count(balance) from balanace_tb
where kk_code in(111,112,113)
or
kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
or
kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
or
kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
or
kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
and
open_date=20130331I assume you're looking for something like this?
select count(balance) from balanace_tb
where ( kk_code in(111,112,113)
or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
and open_date=20130331
If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
Re: 2. How do I ask a question on the forums? -
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
Hi Experts, I have the follow delivery:
Item Material Deliv.Qty Un
10 739911 2 PQT
And I want to obtain this:
Item Material Deliv.Qty Un Batch
10 739911 0 PQT
900001 739911 1 PQT ZZ00060
900002 739911 1 PQT ZZ00061
But, after using the Bapi I obtained this:
Item Material Deliv.Qty Un Batch
10 739911 1,372 PQT
900001 739911 0,314 PQT ZZ00060
900002 739911 0,314 PQT ZZ00061
So as you can see the problem is with the "Deliv.Qty". I expected:
Item Deliv.Qty
10 0
900001 1
900002 1
But I obtained:
Item Deliv.Qty
10 1,372
900001 0,314
900002 0,314
The parameters that I am using in the Bapi are:
HEADER_DATA
DELIV_NUMB = 801174646
HEADER_CONTROL
DELIV_NUMB = 801174646
DELIVERY = 801174646
TECHN_CONTROL
UPD_IND = U
ITEM_DATA (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
MATERIAL = 739911
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
MATERIAL = 739911
BATCH = ZZ00060
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
MATERIAL = 739911
BATCH = ZZ00061
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
ITEM_CONTROL (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
CHG_DELQTY = X
So I am missing something but I don't know what.
Can any one help me with this please?
PD: I have looked the following forums in order to use the Bapi:
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
batch split using BAPI_OUTB_DELIVERY_CHANGE
Re: Help in BAPI_OUTB_DELIVERY_CHANGE(batch-split)
BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
Help for BAPI_OUTB_DELIVERY_CHANGEHey,
My code is for the inbound delivery but it should work the same.
Give this a try.
REPORT z_delivery_batch_split.
DATA:header_data LIKE bapiibdlvhdrchg,
header_control LIKE bapiibdlvhdrctrlchg,
delivery LIKE bapiibdlvhdrchg-deliv_numb,
ls_return LIKE bapiret2,
item_data TYPE TABLE OF bapiibdlvitemchg,
item_control TYPE TABLE OF bapiibdlvitemctrlchg,
ls_item_data LIKE bapiibdlvitemchg,
ls_item_control LIKE bapiibdlvitemctrlchg,
return TYPE TABLE OF bapiret2 WITH NON-UNIQUE KEY type.
header_data-deliv_numb = '1800005005'.
header_control-deliv_numb = '1800005005'.
delivery = '1800005005'.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900001'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 80.
ls_item_data-dlv_qty_imunit = 80.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900002'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 60.
ls_item_data-dlv_qty_imunit = 60.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900001'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900002'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
break cgavin.
CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
EXPORTING
header_data = header_data
header_control = header_control
delivery = delivery
* TECHN_CONTROL = TECHN_CONTROL
TABLES
* HEADER_PARTNER = HEADER_PARTNER
* HEADER_PARTNER_ADDR = HEADER_PARTNER_ADDR
* HEADER_DEADLINES = HEADER_DEADLINES
item_data = item_data
item_control = item_control
* ITEM_SERIAL_NO = ITEM_SERIAL_NO
* EXTENSION1 = EXTENSION1
* EXTENSION2 = EXTENSION2
return = return
* TOKENREFERENCE = TOKENREFERENCE
* HANDLING_UNIT_HEADER = HANDLING_UNIT_HEADER
* HANDLING_UNIT_ITEM = HANDLING_UNIT_ITEM
* PARTIAL_GR_OBJECTS = PARTIAL_GR_OBJECTS
READ TABLE return
INTO ls_return
WITH TABLE KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE ID ls_return-id TYPE ls_return-type NUMBER ls_return-number WITH ls_return-message_v1 ls_return-message_v2
ls_return-message_v3 ls_return-message_v4.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
break cgavin.
*& Form CREATE_BATCH
* text
* <--P_LS_ITEM_DATA_BATCH text
FORM create_batch CHANGING p_ls_item_data_batch.
DATA: ls_bncom TYPE bncom.
ls_bncom-matnr = ls_item_data-material.
ls_bncom-werks = 'C333'.
ls_bncom-lgort = '3000'.
SELECT SINGLE mtart
FROM mara
INTO ls_bncom-mtart
WHERE matnr = ls_bncom-matnr.
CALL FUNCTION 'VB_NEXT_BATCH_NUMBER'
EXPORTING
matnr = ls_bncom-matnr
werks = ls_bncom-werks
check_batch = 'X'
check_material = ''
message_when_auto = ' '
x_bncom = ls_bncom
lock_batch = ' '
IMPORTING
new_charg = p_ls_item_data_batch
EXCEPTIONS
no_material = 1
no_plant = 2
material_not_found = 3
plant_not_found = 4
no_batch_handling = 5
batch_exist = 6
no_number = 7
illegal_batch_number = 8
interval_not_found = 9
object_not_found = 10
interval_overflow = 11
error_automatic_batch_number = 12
cancelled = 13
automatic_batch_num_not_active = 14
OTHERS = 15.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
ENDFORM. " CREATE_BATCH -
Need documents for how to use OAM for APPS DBAs
Hi All,
Need documents/pdfs, how to use OAM for APPS DBAs.
Thanks a lot in advanceHi,
For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
For 11i version pls chk :
Oracle Applications System Administrator's Guide - Configuration (zipped) B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
--Rk -
How to use offset for select-option parameter ?
Hi experts
could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters.
following is my code
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
here "prctr" length is 10.
i'm using two tables 1. vbsegd-bupla
2. vbsegs-prctr
here prctr+6(4) = bupla.
"Bupla" length is 4
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
WHERE belnr = it_vbkpf-belnr
AND gjahr = it_vbkpf-gjahr
AND bukrs = it_vbkpf-bukrs
AND bupla IN s_prctr.
the above statement is not working as prctr and bupla lenths are different. here i want to use offset.
SELECT belnr gjahr bukrs prctr sgtxt buzei FROM vbsegs INTO CORRESPONDING FIELDS OF TABLE it_vbsegs FOR ALL ENTRIES IN it_vbkpf
WHERE belnr = it_vbkpf-belnr
AND gjahr = it_vbkpf-gjahr
AND bukrs = it_vbkpf-bukrs
AND prctr IN s_prctr.
this is working as prctr and s_prctr lengths are equal.
could anybody please help me out in this.
Thanks in advance.
regards
satishBelow code will work for you.
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
RANGES: s_bupla FOR vbsegd-bupla.
s_bupla[] = s_prctr[].
DELETE ADJACENT DUPLICATES FROM s_bupla.
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
WHERE belnr = it_vbkpf-belnr
AND gjahr = it_vbkpf-gjahr
AND bukrs = it_vbkpf-bukrs
AND bupla IN s_bupla. -
How to use stysheet for Swing components?
Hi,
Give me a guidence abt how to use Stylesheet for Swing components to crate good looking GUI...........thnxthank you for your reply,
I want to know how many times a component is refreshed. I'm asumming the RefreshCondition attribute gets called everytime a component gets refreshed, hence it could be counted.
I'm just not sure how to use it. -
Advice on Learning how to use Flex Data Services
Hi. I've been using flex for a while and I'm now at the stage
where I'd like to be able to develop AIR apps. I wanted to do
something simple to start with...eg. have an AIR app on a few
friends desktops that lets users tick a box if they can make it to
a poker game. Do I need to learn another language like PHP to do
this or can it be done using just Flex? Other than the live docs
and dev guide that come with flex are there other
documentation/online info that can be recommended.
Thanks!the LCDS sql assembler might be a good fit for you. it allows
you to do sql crud from flex. there's not server side coding, just
xml config.
http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/lcds/help.html?content=dms_st andard_assemblers_2.html#334899 -
How to use multithreading for asynchronous operation
hi! i am really new to java, i want to improve the performance of my code, some suggested to implement asynchronous operation using multithreading. Please help me how to use multithreading for asynchronous operation. thanks in advance.
http://java.sun.com/docs/books/tutorial/essential/threads/
Note, however, that just making something multithreaded won't necessarily improve performance. You either need multiple CPUs or there needs to be some I/O going on that blocks while something else could be done--other I/O or computing. -
HT1414 how to use itune for iphone activation
how to use itune for iphone activation
Get the latest version of iTunes, your Apple ID and just connect the iPhone to your computer and iTunes will guide you through activation.
-
CS3 missing components or How to use Flex 2 components in CS3
Does anyone have a good resource for how to use Flex2
components in CS3?
I found an install that said it would install Flex2
components in CS3, but all it added waas the UIMovieClip for
packaging Flash MC in swc's for Flex.
Right now I am specifically trying to solve the missing
dateField component in CS3.
But I would like to find out if anyone has found a good
resource for alternatives to all missing components in CS3.
I'm hoping the answer is not to build them from scratch.
Thanks,
HunterHi,
Pleas find details at the URL below.
http://labs.adobe.com/wiki/index.php/Flex_2_Tag_Library_for_JSP
Hope this helps.
Maybe you are looking for
-
How do I install the latest version of iTunes with ios7
I have been trying for weeks to download the latest version of iTunes to my windows 7 laptop so that i can sync my newly updated ios7 iphone to my computer however it just wont work! It starts to download then it says that the file cannot be found. W
-
Hello all, not sure if I'm on the right thread but if not please do point me to the correct one. basically I have a script that run every end of the month to do a backup of a database (Detach, Mount a new, and move the database to a new location) bu
-
Where can I find the upgrade from Elements 9 to Elements 12?
I cannot find the page to upgrade Elements. Can someone please give me a link? Thank you
-
Perfomance Issue on Windows Server 2003 Cluster
Hello, we have a strange perfomance issue: we have a single Windows 2003 Server for the XI Quality System and a Windows 2003 Server on production (both of them 32 bit). When we transport an integration scenario 1:1 from quality to production we have
-
HOw to get the new emojis on my ipod 32
I dont know my generation (its not sold anymore its before 4) its on iOS 5.1.1. I get boxes in my imessage to friends and I dont understand why. I have tried countless emoji apps to no avail. I have the emoji keyboard on but no emojis (at least the n