How to use FND_MESSAGE In my Controller.

Hi,
I want  to display a message using FND_MESSAGE in my controller.Instead of hard coding message.
Please explain me how to do it.
Thanks.

Hi,
Check with this link:
https://forums.oracle.com/thread/2219546
--Sushant

Similar Messages

  • Req any examples of how to use a USB midi controller​/keyboards with Labview TIA

    Req any examples of how to use a USB midi controller/keyboards with Labview TIA

    Hi,
    To access the MIDI ports you will need to call the Windows SDK. To send MIDI commands is relatively easy, here is an example that shows you how to send data to a MIDI controller or keyboard.
    As far as input goes, this is the hard part. There are a series of functions that you need to call to open up the device, set some buffers and and possibly a callback to get notifications on the incoming data.
    Reading MIDI data will not be an easy task, your best bet will be to implement this in a DLL and call that DLL in LabVIEW, there should be some code available o the web.
    = "http://msdn.microsoft.com/library/default.asp?url​=/library/en-us/multimed/htm/_win32_multimedia_... is a link to the Windows multimedia functions that you could use for MIDI input.
    Let me know if you have any further questions.
    Regards,
    Juan Carlos
    N.I.

  • How to use orignal XBOX gamepad controller S under OSX ? (not xbox 360)

    Hi,
    i'd like to use my original xbox (not XBOX 360 !) controller on my MBA running under OSX 10.7.
    I tried to install Xbox HID Driver 1.3.4 for Mac OS X from http://xhd.sourceforge.net, but installation failed under Mac OS X 10.7 Lion.
    I'm getting an error message during installation.
    So, is it possible to use my old xbox controller with my mac ?
    Thanks !
    Here is the controller what I'm talking about : the "controller S"
    I bought a USB adapter for this controller :

    I am trying to do the exact same thing. Like you I failed to install that driver. Doesn't seem to be much else out there. Let me know if you have found anything. Think I will just have to step up and buy another controller.
    Sorry to be of no help..but you're not the only one to have this problem if that means anything

  • How to use a specific MIDI controller to control instruments loudness?

    Hi, I just started using Logic, so it's possible I will find the answer to this question by myself over time, but maybe somebody can point me to the answer right now...
    I want to control the loudness (volume) of a software instruments over time, for a given note, using a MIDI controller channel. The note velocity only controls the loudness of the attack.
    Of course this is not applicable for an instruments such as the piano, but it is quite important for string or wind instruments where you can attack a note very softly but keep playing louder on the same note.
    The MIDI controller to control that could be after touch. In my case, it would be CC2 (breath control), as I use a wind controller.
    My experiment so far is that Logic sees the value of CC2 correctly, but whatever its value, the loudness of the note sound never changes.
    I understand that the answer to that question might depend on the instrument under consideration. Then an example would be of great help.
    Many thanks.
    JD

    Jean-Denis Muys wrote:
    My experiment so far is that Logic sees the value of CC2 correctly, but whatever its value, the loudness of the note sound never changes.
    As it was suggested you can try CC11 or you can transform your existing CC2 to CC11. Patch a transformer between the Physical Input and the Sequencer Input in Click & Ports Environment layer and make the next settings in the transformer:
    Conditions
    Status=Control
    Data Byte 1 (= 2)
    Operations
    Data Byte 1 (Fix 11)
    It this scenario your incoming CC2 will be transformed into CC11 and you can control the Expression (CC11) of a software instrument if it responds to that controller at all ( some software instruments must be mapped previously to have such respond ). Note you will be able to control only the selected track this way.
    You can try to use the Controller Assignment dialog and learn CC2 to control the "level" parameter of an instrument or its channel strip level fader, gainer plugin (which can be inserted in the top plugin slot) etc as well.
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!

  • How to use application class reference in the controller methods of BSP

    Hi,
    I have created a bsp application and also created an application class and assigned it to the application class. In the application class, I have created attribute TEXT type string(public and instance parameter).
    In the controller let's say main.do, I am trying to give a value to to the text by adding the following code.
    application->text = 'test'.
    I am getting syntax error saying field 'text' is unknown. It is not contained in one of the specified tables nor defined by DATA statement. 
    Please can someone let me know how to use the application class in the coding with an example. I couldn't find how exactly this has to be reference. Please help.
    Best regards
    Siva

    Hi,
    if you are having main controller and sub-controller then you may need to use below coding to use application class reference.
    *Data declaration
      DATA:  obj_cntrl        TYPE REF TO cl_bsp_controller2,
             obj_sub_cntrl   TYPE REF TO z_cl_sub_cntl,
             application TYPE REF TO z_cl_application.
    *Get the controller
      CALL METHOD obj_main_cntrl->get_controller   "obj_main_cntrl is the object of main controller
        EXPORTING
          controller_id       = 'SUB'   "Controller ID
        RECEIVING
          controller_instance = obj_cntrl  .
      obj_sub_cntrl ?= obj_cntrl  .
      application ?= obj_sub_cntrl ->application.
    or simply use below code in your controller method.
      application ?= me->application.
    Thnaks,
    Chandra

  • How to use XSJS file path in Controller.js file

    Hi Experts,
    Regarding How to use XSJS file path in Controller.js file.
    I have gone through the SAP HANA Extended Application Services (Thomas Jung http://scn.sap.com/community/developer-center/hana/blog/2012/11/29/sap-hana-extended-application-services article.)
    Seems to be there is no information about the same. May be the article is targetted for Beginners and above. As I am a learner I am not able to do the same.
    var aUrl = '../../logic/demo_main.xsjs? (highlighted)
    Suppose my XSJS file is at http://ipaddress:8000/newtest/Func.XSJS.
    Can I use like below
    var aUrl = 'http://ipaddress:8000/newtest/Func.xsjs?
    or
    var aUrl = '../../newtest/Func.xsjs?
    I tried with multiple options but not able to get the expected output.
    Can you please provide more details on this?

    Dear Thomas,
    I am a abap developer , recently we meet a problem on our webdynpro report performnace issue. As in the development, we use SALV_WD_TABLE to design a ALV. and verything work correctly in our DEV system.
    But after when our QAS system, there are more records for the ALV, one of them has 21000 records. And in the layout, we have a column as checkbox.
    If we click any one checkbox, then the layout will respond almost 1~2 minutes. With debug I found the most time cost in the standard program.
    And with search I found that you have solution to solve it as 1,000,000 rows.
    So is it possible to provide some idea or solution to us?
    Many thanks for your help!
    BR
    Vincent Chen

  • How to Use JavaScript in Controller Class...

    Hi All,
    Can any one tell me how to use JavaScript in Controller Class.
    Requirement is:
    I have
    Radio Group(RG1),
    Two Radio Buttons(RB1,RB2),
    Two messageTextInput(MTI1,MTI2),
    if i click RB1 i should Prompt to the end user to "Enter value for MTI1" or
    If i click RB2 i should prompt "Enter value for MTI2" while submitting page.
    Please let me know the steps to use JavaScript and the above client validation...
    Regards
    Alem...

    Using javascript is against the standard. I can tell you a workaround instead of you setting the javascript, check if that would be acceptable.
    You can use PPR and set the required property on the messageTextInput on clicking of the radio button. By doing this you will let UIX generate the javascript for you to handle the client side validation. But the validation will happen only on click of the submit button. The visual indicator is good enough to tell that the value has to be entered to the item.

  • How to use $controller.DateTimeUtils.DateGet method ?

    Hi everyone,
    Can someone tell me how to use the $controller.DateTimeUtils.DateGet method ? I would like to know whether a date is a saturday or sunday but I can't figure out how to use the method.
    Thanks in advance
    Chris

    See the JMX documentation.
    http://java.sun.com/javase/6/docs/api/javax/management/modelmbean/ModelMBeanInfo.html

  • How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?

    How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?
    I basically managed to learn how to invert parameters which allows me to be as default in the clean guitar channel and if I switch the first button on the midi foot controller I switch to crunch, but at this point I tryied so hard to programm the second and third button to switch, only through a button in one step, to a third channel for distorsion or a 4th channel for solo guitar but I couldn't figured out how this work can be done!
    I would appreciate if anyone could help or share this experience with others who are experiencing the same problem.
    Cheers.
    F.

    I cannot seem to get mainstage to recognize my FCB either. I am using IFCB. Anyone figure this out?
    Thanks,
    Eric

  • How do I get the QT controller to show (play, pause, rewind, etc.)?

    Hello all. Usually I don't want the QT controller to show up on the video I have on my website. I want viewers to watch the short clips complete without messing around them. So I did something (who knows what) to ensure that the controller would not show or that viewers could download (Kiosk mode I think).
    I have now added a client only section to the site where I want to add the controller back so that clients can review work and make edit notes, etc. For this they need to be able to pause, rewind, etc. I can't for the life of me figure out how I get the controller to show back up. All the trues, falses, etc.
    The video is encoded as h.264. The player shows up when played native from the desktop in the Quicktime Player - just not when it's on the website.
    Many, many thanks for any help.

    You need to add 16 pixels to height dimension in your html code (a 320X240 video would use 320X256).
    The controller is on be default and no html tag is needed. To remove the controller you would use controller="false". So you must remove those lines in your page code.
    Kioskmode doesn't remove the controller. It prevents downloading of the file.

  • How to use a session bean in another session bean (or an EJB in a session)

    JDev 11.1.1.4, WLS 10.3.4, Windows 7 x64
    I have a login controller with a session-scoped bean that manages logins.
    I have another session-scoped bean that manages menu security.
    both modules compile and work fine now I need to share the data from one to another.
    I need to reference the login controller in the menu security bean. How do I reference (include) the login bean in the security bean?
    I tried an EJB - what a farce - these are supposed to be universal and easy ( basis of the oop in Java).
    the bean is defined:
    @Stateless(name = "SecurityEJB", mappedName = "ZITASApplication-ZITASModel-SecurityEJB")
    I have tried :
    ic = new InitialContext();
    session = (SecurityEJBLocal)ic.lookup("ZITASApplication-ZITASModel-SecurityEJB#model.security.logic.SecurityEJB");
    session = (SecurityEJBLocal)ic.lookup("ZITASApplication-ZITASModel-SecurityEJB#model.security.logic.SecurityEJBLocal");
    session = (SecurityEJBLocal)ic.lookup("java:ejb/model.security.logic.SecurityEJB");
    session = (SecurityEJBLocal)ic.lookup("java:ejb/SecurityEJB");
    session = (SecurityEJBLocal)ic.lookup("java:app/SecurityEJB");
    session = (SecurityEJBLocal)ic.lookup("java:module/SecurityEJB");
    All return null pointers and claim the name cannot be resolved.
    As you can see - I have found various claims to how to do this.
    One way says create a sevlet, generate a listener and use the sevlet. Basically one for every EJB - a lot of work to use the EJBs
    I would assume that this would be one of the easiest parts of java - as it is the foundation of re-usability and oop.
    I can do either in the application - the added complexity of the EJB is less desirable - but better programming?

    Hi,
    ic.lookup("ZITASApplication-ZITASModel-SecurityEJB#model.security.logic.SecurityEJB");This should work with remote interface. If you want to lookup local interface, you need to register it in web.xml. Quote:
    To access the business local interface you need to define ejb local references for your component environment (i.e. from your servlet environment). You can do this by defining references in your web.xml. For example:
    <ejb-local-ref>
    <ejb-ref-name>ejb/BusinessLogicBean</ejb-ref-name>
    <local>packagename.BusinessLogicBean</local>
    </ejb-local-ref>
    To lookup your local reference from your servlet you need to use the following JNDI reference:
    java:comp/env/ejb/BusinessLogicBean Another one
    First, declare a local ejb reference in your web.xml file (This will add it to JNDI):
    <ejb-local-ref>
    <ejb-ref-name>ejb/Foo</ejb-ref-name>
    <local>simple.ejb.FooLocal</local>
    </ejb-local-ref>
    Then it can be looked up from JNDI:
    InitialContext ctx = new InitialContext();
    FooLocal foo = ctx.lookup("java:comp/env/ejb/Foo");Hope this helps.
    Pedja
    Helpful links (judging from your first post, you are probably sick of these :) )
    How to lookup local EJB in Oracle Weblogic 10.3
    http://m-button.blogspot.com/2008/07/reminder-on-how-to-use-ejb3-with.html
    http://www.coderanch.com/t/451012/EJB-JEE/java/EJB-Local-Lookup-not-working

  • How to use a 64-bit Matlab ActiveX in a 32-bit CVI?

    I have a CVI 9.0 and 64-bit MatLab R2012a installed on my PC together with 64-bit Windows 7.When I try to use "Create ActiveX Controller" wizard to use the Matlab ActiveX,a message went out says"The Type Library is not intended for use on Win32".Seems like it's because my CVI is 32-bit but my Matlab is 64-bit.So I wonder is there any way for me to use the MatLab ActiveX Controller?
    PS.I have been checked on this topic:http://forums.ni.com/t5/LabWindows-CVI/How-to-create-ActiveX-Control-in-LabWindows-CVI-2010/td-p/183...
    But it's not workong for me due to different CVI version.
    Thank you guys.

    Thank you for your reply.
    Does this means that it is still not possible to use the PDF ActiveX control in a x64 WinForms application?

  • How can I boot my PXI controller into real-time without a floppy disk?

    My PXI controller is in a lab which has intense magnetic fields that could corrupt the floppy disk used to boot the PXI controller into the LabVIEW Real-Time (RT) Operating System. How can I boot the PXI controller into real-time directly from the hard drive?

    If you are using LabVIEW 5.1.2 Real-Time (RT), launch Remote System Explorer and select Disks >> Create Format Hard Drive Disk. If you have LabVIEW 6 RT, launch the Measurement and Automation Explorer (MAX) and select Tools >> RT PXI Disk Utilities >> Create Format Hard Drive Disk (LabVIEW RT 6 has not be released yet). Once you have created the disk, boot the PXI controller with the Format Hard Drive Disk, and this will format the PXI's hard drive and install the real-time OS boot loader. Now you can reboot the PXI without a floppy disk and configure the PXI using Remote System Explorer or MAX. Be aware that this will remove all information from the hard drive, including other operating systems.

  • How to use Object Class:orclDbServer in OID

    Not sure if i have posted in the correct forum, I am quite new to OID
    I am planning to use orclDbServer Object Class, but not sure how to use, i have searched in Google, and Oracle Documentation, there are so little information about this, there are only:
    Object Class: orclDbServer
    Description: Defines the attributes for database service entries
    Attributes: orclNetDescName, orclVersion
    Below is the ldif file i created for add one entry with object class orclDBServer:
    dn: cn=orclDBServer_test, cn=OracleContext, dc=ldapcdc, dc=lcom
    changetype: add
    objectclass: top
    objectclass: orclDBServer
    cn: orclDBServer_test
    orclNetDescName: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.182.114.121)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = oh112)))
    after i use below command to add this entry:
    ldapadd -h localhost -p 389 -D "cn=orcladmin" -w welcome1 -f test_add.ldif
    then use ldapsearch to search:
    ldapsearch -h localhost -p 389 -b "dc=lcom" "objectclass=orclDBServer"
    the result is like below:
    cn=orclDBServer_test, cn=OracleContext, dc=ldapcdc, dc=lcom
    cn=orclDBServer_test
    orclnetdescname=(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.182.114.121)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = oh112)))
    objectclass=top
    objectclass=orclDBServer
    objectclass=orclService
    It seems it added a line for me:
    objectclass=orclService
    Is there anything wrong with my ldif file when i want to use orclDbServer?
    Edited by: ening on Jan 5, 2010 9:31 PM

    Hi,
    if you are having main controller and sub-controller then you may need to use below coding to use application class reference.
    *Data declaration
      DATA:  obj_cntrl        TYPE REF TO cl_bsp_controller2,
             obj_sub_cntrl   TYPE REF TO z_cl_sub_cntl,
             application TYPE REF TO z_cl_application.
    *Get the controller
      CALL METHOD obj_main_cntrl->get_controller   "obj_main_cntrl is the object of main controller
        EXPORTING
          controller_id       = 'SUB'   "Controller ID
        RECEIVING
          controller_instance = obj_cntrl  .
      obj_sub_cntrl ?= obj_cntrl  .
      application ?= obj_sub_cntrl ->application.
    or simply use below code in your controller method.
      application ?= me->application.
    Thnaks,
    Chandra

  • How to use an instance instead of the class itself

    I am building a program but have a problem.
    My program uses a controller class which instantiates a World-class. In the world class has a Vector I make a Vector in which I place all the elements in the world. (I also made an Element class from which all the objects that I put into this Vector extend.)
    Everything except for some methods in the controller class are declared public. I might need to use static, but I do not know how.
    // CONSTRUCTOR CONTROLLER CLASS
    world = new World ();  // instantiate one and only one world
    world.newElement (new Beamer ("beamer", 20. , 20.));  // use a selfwritten method to add a "Star Trek"-like
                              // beamer to the world. I give it a name and position.
    world.newElement (new Avatar ("avt", "beamer"));  // add an avatar which is "beamed up". so what I do is that I use the beamer for the beginposition of the avatar. However, and this is my problem, in the constructor of Avatar (see below) i need the beamer in world, but my compiler cant find world. I probably need to import my World or controller class, but even then: I do not understand how to use an instance (world is an instance. I cant use the World-class as the class does not contain the beamer element)
    public class Avatar extends Element {
         public Avatar (String n, String beamer){
              name = n;
              posx = world.named("beamer").getPosx; // the selfwritten method named finds the
                // element in the Vector that goes with the name. Any ideas to make this code better are welcome too.
              posy = world.named("beamer").getPosy;
    } Any ideas on how to solve this (common) problem in good coding are most welcome.

    I think you are best off if you use static methods and static fields only in your World class. That way you don't have to instantiate it and everyone has access to its methods. This would be then completely analogous to how you access methods and fields of the well-known class System (e.g. when you use System.out.println). This also has the advantage that you are guaranteed to have only one copy of the World.
    Here is an example of how your World class, Avatar class and main code would look like.
    Main code: (note the use of capital W in the name World, referring to class rather than instance).
    // no need to instantiate World, as we call its static methods only
    World.newElement (new Beamer ("beamer", 20. , 20.));
    World.newElement (new Avatar ("avt", "beamer"));  // add an avatar which is "beamed up". World class: (note the static keyword in front of the vector and the methods)
    public class World {
      private static Vector v;       // static field, only one copy of it ever exists
      public static void newElement(Element e)   // static method, can call without instantiating world
         v.addElement(e);
      public static Element named(String n)  // use to look up elements
         ... some code which goes through v and finds element named "n" ...
         ... return reference to that element ...
    }and finally the Avatar: (again note the use of reference to World as a class rather than instance)
    public class Avatar extends Element {
         public Avatar (String n, String beamer){
              name = n;
              posx = World.named("beamer").getPosx;
              posy = World.named("beamer").getPosy;
    } The above example is how I would implement it when you don't actually need instances of the World class.

Maybe you are looking for