How to use front microphone port for Vo

Hey guys, I'm using a trusty old audigy platinum, and I recently grabbed a headset to hop into gaming chat and VoIP with friends. The microphone works fine, because I can hear myself speaking through the headset. However, when I try to use it, no VoIP software recognizes it. I believe that the problem is that it's plugged into Microphone/Line-In 2 on my front panel. It's not a software-specific problem, because both GTalk and Skype have it. I do know there's some way to do a software work around, because some of my sound editting software allows me to take the input from the front(such as a guitar) and record and play fine.
What I need, is some way to pass off Microphone/Line-in 2 as Mic port , or some specific work around to make both Skype and GTalk work with the front ports. Putting it in the back is really not an option.
Thanks in advance for any help.

To use it with skype, go to options and under audio devices there should be an option called "Let Skype adjust my sound device settings." Untick this box and manually set the recording source to be "Mic2/Line-In 2."
The it should work with Skype without a problem

Similar Messages

How to use a fixed port for remote assistance in windows 8.1 behind a nat router freebox?

Hello,
Before to use remote assistance in windows 8.1, i need to configure my nat router freebox.
But remote assistance ( msra.exe ) use a dynamique port and never the same.
How to use a fixed port for remote assistance ini windows 8.1 ?
And why i can't use easy connect ?
i read that the router must implement the PNRP protocol. I think it's a propriatary microsoft's protocol unknow on my router.
Thanks

Hello,
Very good. It's a big range ( 255 mini from 49152 ) for a single port but if it's the only one possibility...
You are very helpfull ( i don't know if it's a good english but you make me very happy )
Merci beaucoup

Can't use front USB port for external Hard Drive

I have had some problems for about the past year with the front USB port on my 2009 13in Macbook Pro 5.5.
As you know, there are 2 USB ports on the left side on a 13inch Macbook pro. The one closest to me (the front one) works fine when I use it with a flash drive. But when I connect my external 7200RPM external drive to it, after about a minute, it ejects then re-recognizes the disk.
I video edit with FCP and use the external as one of my scratch disks.
At first I thought maybe it was the cord or the drive that was messed up. But then I connected my other external drive to this port and the same thing happened.
But when I connected it to the back USB port, everything works fine. I haven't had any trouble. So i make sure it's connected to that port when using the external.
Why would this be happening. It only screws up when using a standard external drive but not flash drives or any other peripherals.
Thanks
Brandon

Exactly what Ogelthorpe mentioned.
I bought a Seagate 500GB 7200RPM and bought an external case from Staples that has a big fancy led to show HD activity. Sometimes it works and sometimes it doesn't.
Tested it on my PC and it works all the time so it got me stumped. Thought it was my MB.
Decided to try another external drive drive on my MB and everything works. So I returned the fancy external enclosure and bought the simple $10 one.
Now everything works fine.
Maybe changing your external case might help you.

How to use non-standard port for vnc?

Our Windows users who use RDC to connect to their desktops from off-site come in on a non-standard port number. Part of our security setup.
I'd like to do the same with Mac users who use screen sharing and vnc to connect remotely.
How can I specify another port number at both ends to accomplish this?
I can find nothing in the Network Utility app, or in the KB.
Surely there's a short sequence of Terminal commands that will do this?

I haven't tried this so don't know whether it will work. But I think it will. Presuming the target machine is a Mac, see if editing its /etc/services file will do it. Find the two lines that start with "vnc-server" and change the port number there. Launch Terminal.app as an administratively privileged user, sudo pico /etc/services, ^w to search for vnc-server, make the changes, ^x to exit, y to save and overwrite. Also, you will need to have screen sharing enabled in the target machine's System Preferences' Sharing, and the authorized users defined there, too. Reboot. Now, on the remote client, assuming it is also a Mac, the user would type ⌘k in the Finder (or mouse to Finder > Go > Connect to Server), and enter something like vnc://123.45.67.89:55900 where you substitute the actual IP address or host name for where I have entered 123.45.67.89, and where you substitute the actual alternate port number where I have entered 55900. Of course, in the clients' Screen Sharing's Preferences, they should choose to encrypt the entire session, not just the login. Like I said, I haven't tried this because I just tunnel my vnc stuff through ssh, but I'm thinking that this should work.

How to use an authenticated user for a proxy call

Dear all,
I am currently working on a JEE application where the user needs to authenticate (for this I have configured the web.xml).
Now inside this application I need to do a proxy call to a PI webservice.
I would like to use the user credentials of the already logged in user in order to call the proxy.
What I don't want to do is to use a service user for the proxy call.
The code I am trying to call looks something like this:
     private IntegratedConfigurationIn getPort() throws Exception{
          IntegratedConfigurationIn port = null;
          try {
               IntegratedConfigurationInService service = null;
               service = new IntegratedConfigurationInService();
               port = (IntegratedConfigurationIn) service.getIntegratedConfigurationIn_Port();
              BindingProvider bp = (BindingProvider)port;
              bp.getRequestContext().put(BindingProvider.USERNAME_PROPERTY, user);
              bp.getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, password);
              if (url.length() != 0)
                   bp.getRequestContext().put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, url);
          catch (Exception ex){
               ex.printStackTrace();
          return port;
The examples I found to retrieve the userdata pointed to codes similar to this one:
public HttpServletRequest getHttpRequest() throws Exception {
          // Get runtime context
          Properties props = new Properties();
          props.put("domain", "true");
          Context initialContext = new InitialContext(props);
          ApplicationWebServiceContext wsContext = (ApplicationWebServiceContext) initialContext
                    .lookup(" /wsContext/ApplicationWebServiceContext");
          HttpServletRequest req = wsContext.getHttpServletRequest();
          return req;
com.sap.security.api.IUser sapUser = com.sap.security.api.UMFactory.getAuthenticator().getLoggedInUser(getHttpRequest(), null);
          IUser ep5User = com.sapportals.wcm.util.usermanagement.WPUMFactory.getUserFactory().getEP5User(sapUser);
Now I don't know how to bring it togehter and how to use an authenticated user for the BindingProvider.
I would appreciate any hints or ideas.

Peter,
from the first screenshot, what I understood is that, you are calling an inbound PI web service that is intended to create an integrated configuration object (this is used for whole lot of other reason completely) but not actually calling a development web service.
For this, you would have to generate your client classes from the WSDL provided by the PI developer for that particular service. Once you get those client classes generated, you could used the method provided in the other screenshot to extract the user and password and call the intended web service.
Vijay Konam

How to use transaction SOST & SCOT for checking Email performance ?

How to use transaction SOST & SCOT for checking Email performance ?
what exactly as CRM Functional we have to do in above transaction .
Please guide me . what is significance of these transaction ?
Regards,
Anup Reche

Hi Anup,
Transaction SOST is used to view the status of the sent mails from SAP.
You cna filter the mails sent by a particular user, on a specified date range and time.
You can list the mails in the status Waiting, Error, Sent or Transmitted.
You can also go to the log of the mail and see its details and can also open the mail sent by the user.
You can add the filters as per your requirement.
Transaction SCOT is SAP Connect used to make connections from SAP to external applications.
You cna configure sending of external mails in SCOT by specifying the SMTP host and port to be used.
Hope this gives you a basic idea of the 2 transactions.
Regards,
Saumya

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

How to use the second display for installation OS in my vertical lines iMac

My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How to use the index method for pathpoints object in illustrator through javascripts

hii...
am using Illustrator CS2 using javascripts...
how to use the index method for pathpoints object in illustrator through javascripts..

Hi, what are you trying to do with path points?
CarlosCanto

How to use the different class for each screen as well as function.

Hi Experts,
How to use the different class for each screen as well as function.
With BestRegards,
M.Thippa Reddy.

Hi ThippaReddy,
see this sample code
Public Class ClsMenInBlack
#Region "Declarations"
    'Class objects
    'UI and Di objects
    Dim objForm As SAPbouiCOM.Form
    'Variables
    Dim strQuery As String
#End Region
#Region "Methods"
    Private Function GeRate() As Double
            Return Double
    End Function
#End Region
Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
        If pVal.BeforeAction = True Then
            If pVal.MenuUID = "ENV_Menu_MIB" Then
            End If
        Else ' Before Action False
            End If
    End Sub
#End Region
End Class
End Class
Rgds
Micheal
Vasu Anna Regional Feeling a???? Just Kidding
Edited by: micheal willis on Jul 27, 2009 5:49 PM
Edited by: micheal willis on Jul 27, 2009 5:50 PM

How to use the LAN NetStream for peer transmission, please help, write a sample code

How to use the LAN NetStream for peer transmission, please help, write a sample code

No reply, I reply, Oh

How to use front microphone port for Vo

Similar Messages

Maybe you are looking for