How to use FTP with Time Capsule Gen4

I am having difficulty setting up FTP with my Time Capsule. This is the first time I have attempted using FTP on the Time Casule and have read through some documentation and believe I have it set up correctly but could be wrong. I am using FileZilla and tried to connect but the connection fails therefore my post for assistance.
If someone could provide me the basics or links for installation/testing and etc.. I would very much appreciate it. At this point I feel I just need to start over.
Thanks,
John

Port forwarding for FTP is rather more complex than it first seems..
Ports that need to be open depend on type of FTP.. ie active or passive.
Read the discussion of ftp through NAT.
http://slacksite.com/other/ftp.html
Make sure the firewall on the computer that is running ftp is off.
And I guess in the end.. if you have a different router give that a go.. it can help identify where the problem is.
If you are using v6 airport utility.. opening ports is not at all easy either.. definitely recommend you install 5.6 utility.
If you are still on lion just install it.. http://support.apple.com/kb/DL1482
If you are on ML tell us as there are ways and means.

Similar Messages

Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before.

Using itunes with time capsule

I am looking for step by step instructions to set up iTunes to work with time capsule. I would like to use time capsule to store and share music over my wireless network.

You just need to set the iTunes music folder location to a folder on the time capsule, then any content you add to iTunes will be stored there. You can find this at iTunes Preferences > advanced.

Using aMule with Time Capsule

Hi,
Prologue: I´m a newbie and thus not too familiar with technical stuff. Sorry for that...
SInce using a TC as a wireless router I get a lowid on aMule. I tried port forwarding through Airport Utility, but it didn't help. I would be happy if someone on this forum could give me a step-by-step description of how to set up my Mac and my Time Capsule in order to make aMule work properly.
Thanks a lot!!!

I have some problems too, I can`t get high ID for my amule. and " kad: firewalled". I did add amule to the firewall list but didn`t work. Who can help me get aMule works faster and get High ID.
Thanks!!

Using iPhoto with time capsule

Can I use time capsule as a Network Hard Drive to place my all of my Photos, and keep the iPhoto config, events, places, faces???

The best way is on an external hard drive, formatted Mac OS Extended (Journaled), with a wired connection.
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Question about streaming music using AE with Time capsule

I have a time capsule with over 120gb of music stored on it. I'd like to be able to stream this music directly from the time capsule to an airport express connected to a stereo in another room. I do have an iPhone 3G with the remote app. (I have not got the airport express, yet.)
I am really hoping that I can use the iPhone remote app to control the music playing through the airport express, without having to have a computer turned on and runing iTunes.
I believe this is possible with Apple TV, but since I don't own a TV or monitor other than my laptop screen, that isn't the most practical solution.
So, can I use airport express to stream music from a time capsule, without having to run iTunes on my MacBook?
Thanks.
SevenDog

No.
You would have to have itunes running in order to stream music, or, as you point out, have an appleTV

How to share music with time capsule

I would like to know how to share Music installed in Time Capsule.. I need that this music could be played in Iphone, Ipad, Apple TV in the same WIFI network

It is not possible.. the TC is not a media player.
You must have a computer acting as itunes server.. although there is no such thing. Apple call it home share.
http://support.apple.com/kb/HT3819
It is possible to store the itunes library on the TC but that makes no difference .. you still need a computer of some sort turned on to play it.

Can i use existing airport with Time Capsule

i have already bought an airport, but can i use it with Time Capsule OR do I need to buy the $299 Time Capsule wireless hard drive?

If you are telling us that you have already bought an AirPort Extreme, and that you want to connect a USB hard drive to the AirPort and use that for Time Machine backups, this is not officially supported by Apple.
Some users seem to be able to make this work, while others.....like me....who try this have nothing but problems.
To be officially supported, you need to connect a hard drive directly to your Mac for Time Machine backups or use a Time Capsule.

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

Bridge the TC.. plug it into the AEBS with ethernet.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

Using Airport Express as separate wifi network vs extender with Time Capsule?

Hello all. I recently converted my home computer network from Windows/PC based to an iMac with Time Capsule. On my previous setup, I had a Cisco/Linksys router with wifi, and I also had two Airport Expresses in separate areas of the house where the Linksys had a weak signal. Obviously, I had the Airport Expresses set up as "separate" wifi networks, as they could not be used as network extenders with the Linksys. This setup seemed to work really good, as the 3 wifi networks provided good blanket coverage in all parts of the house. Each network also seemed to "hand-off" to the other pretty well, meaning that Airport Express 1 would show as the active network when you moved far enough away from the Linksys (or insert any of the network names here, even though I'm pretty sure that the device accessing the network has more to do with this than the networks themselves). In particular, the speeds that I got from the Airport Expresses actually eclipsed the speeds that I would get from the Linksys wifi.
My issue is that after I converted everything, I left the Airport Expresses as "separate networks" and essentially removed the Linksys/Cisco router and replaced it with the Time Capsule. So I still have 3 separate wifi networks, just like before, with the Time Capsule network taking the place of the Linksys wifi network. While the Linksys and the Airport Expresses seemed to co-exist together nicely, I get the feeling that the TC and the AEs are somehow working against each other or at least competing with each other for bandwidth. For example, if I have my iPhone right beside my iMac and TC, and I run a speed test on the iPhone using the TC wifi network, I get download and upload speeds in the range that I am expecting (30-40 mbps download). However, when I walk down the hallway to the other end of the house, the TC tends to remain the dominant wifi network, even when I am in the same room with one of the AEs (this is where they used to "hand off" nicely between networks). When you run a speed test in this location still on the TC wifi, the speed drops down to 5-7 mbps, and worse, I believe the signal becomes inconsistent because webpages and data often seem to be freezing in the middle of downloading. I understand that the distance from the TC is causing this, because my solution has been to manually switch from the TC to the closest AE, and that fixes the issue. Run a speed test after I manually switch to the closest AE when I am in the same room as an AE, and the speeds pop back up to 30-40 mbps.
My question is this: would switching the AEs to "extenders" of the TC wifi network help this issue? Honestly, my laziness was one reason that I did not do this when I setup the TC initially, because I have several devices that access the AE wifi networks that I'd have to update with the new network name and password. Everything was working great before, and I just didn't want to upset the apple cart. But if I have created an unfriendly environment between the TC and the two AEs, I certainly have no problem making the change now. I just wasn't sure if making this change would fix my problem or not. I know it's a mundane thing, but I'd like to be able to roam the house without continuously having to manually switch between wifi networks to get a consistent signal.
Sorry if this is a simple issue. I am admittedly a newbie with the TC and its interaction with the AEs.
Thanks in advance!!

It is not a simple issue.
Exactly which method works best is going to take some experimentation.
The way you are trying to set it up as a roaming network is generally considered the best.. but the devices like iphones do not hand off neatly.
It is interesting that they in fact used to hand off better using the Linksys.. which could be due to its poorer range. The new TC having so much better range is causing the phones to not swap "towers" to the local express.
Test it with a Mac laptop.. as generally they do hand off better.
I cannot quite figure out if you are using roaming correctly. All the wireless should have identical names, with identical security setting and passwords.
The only thing that should be different is wireless channels on each item. And you are likely just using auto anyway.
So each device is creating a wireless network. And for 2.4ghz one should be channel 1, then another channel 6 and another channel 11. For 5ghz it will be same idea but there are more channels available.
When you extend wireless, everything runs the same channel. But the wireless speed is reduced. You must disconnect ethernet to each of the expresses.. and the problem is your 30-40mbps will reduce permanently to 15-20mbps for all clients. So take your choice.. 15-20mbps for all clients forced to double hop is better than 5-7mbps which you experience now when you walk around.. although I am not sure how much browsing you do whilst walking. You may need to compromise which is the better out of several not great alternatives.
I would have a test.. which is wrong btw.. but I have heard that it works.
In your roaming network at the present time. Try setting each router to a manual wireless channel.. and fix all of them the same. So for instance, set 2.4ghz to channel 11. Try fixing the 5ghz as well, say the TC is defaulting to 149, it might not actually respond to manual wireless channels.. you will need to test this.. say set to 36 or 40 and see if the TC is actually changed.. if not just set all the expresses to 149 as well. What you are doing is trying to reinforce the wireless in each area.. but this is actually wrong. So all will have same wireless name and same security wpa2 personal is the only valid one.. and all the same password.
Test with a few clients and see if the results give you decent local speeds as well as better roaming.. once you decide which to do, then you will need to change all the clients.

How can I disable SSID broadcast with Time Capsule?

I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
Thanks.

I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
You can by turning on hidden network.
Open the airport utility .. click on your TC, and then edit.. go to the wireless TAB. Click on wireless options. Click Create hidden network.
Let me add in modern world.. it is totally useless. A person can see your hidden network using any standard wireless analysis software. It adds no security at all.. and WPA2 Personal with a decent password 10-20 characters mix of upper and lower case plus numbers is still solid.. add more characters if you are paranoid.. but honestly hiding SSID does nothing.
http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssi d-really-more-secure/
If you did not know it is not part of the IEEE wireless standard.. it therefore often leads to problems with clients.
There are many other reasons given in the article above..

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

How to use FTP with Time Capsule Gen4

Similar Messages

Maybe you are looking for