How to use G4 as external hard drive?

Hi,
I'm trying to use my G4 (AGP graphics) as an external hard drive connected to my G5 for storing audio. The G4 has a 300Gb ATA drive installed and would be perfect to put all my iTunes files on freeing up the smaller HD on the G5. Both run OS 10.3.9.
Ethernet allows me to share itunes files but not easily move them from one iTunes library to another.
I have tried slaving them via firewire but the G4 doesn't respond to starting up with the "T" key.
Any other ideas?
Thanks,
memjay

Hi Joe,
thanks for the link.
I'm actually just trying to use my G4 as a data dump. This works over the ethernet with most files but iTunes and iPhoto are problematic, I supppose this is to prevent people from copying their entire music library to a friend, or vica versa. I would like to use just the g4, not the screen or peripherals, as the iTunes library but add to it and manage it via the g5. Any other ideas?
thanks,
memjay

Similar Messages

  • HT201250 How to use time machine external hard drive on other devices

    I have an external hard drive which i usually use to back up my macbook pro via time machine but if i put pictures or songs on the external hard drive and connect it to a gaming concole or a pc nothing happens. The concole and pc doesn't recognize the device. Is there anything i can do to make it so i can access files from other devices while still using it for time machine?

    The external drive is Mac formatted for Time Machine. Your gaming console and PC won't be able to read its format.
    If you are determined to use it for both purposes, you can partition the drive in Disk Utility. Format the PC partition for MS-DOS or whatever is required for your gaming console. You may or may not have sufficient space for both partitions. If you do not you will have to erase your Time Machine backups.

  • How to use the same external hard drive for OSX and XP

    Hello to all. First off, thanks for all of the helpful comments that have been posted in the discussion board, they have helped me a lot with my problems and curiosities. My question has been touched on in the past, but nothing concrete so I figured I'd ask a bit more specifically.
    I recently loaded Windows XP (FAT32)onto my MacBook. Everything is running smoothly, but I was just curious how I could format my external HD so that both operating systems can read it, i.e. I only have 20 GB's partitioned for Windows XP, and i'll be using it to download music and movies. I would like to be able to play these straight from my external rather than use up the disc space. Let me know if anybody can help! Thanks.

    Unfortunately, Disk Utility doesn't just move everything around. It has to erase everything, and then resize. I find it a little odd, seeing as other disk utilities can resize everything just fine. Anyway, yes, you will have to erase your drive to reformat it as FAT32. What I usually do is try to copy everything from the drive to free space in the internal drives. I haven't had too much data on my drive yet, so I've been lucky so far. I don't know if you have enough free space on whatever drives you have, but that's probably the best way to do it.
    1) Transfer everything over to a folder on the internal drive
    2) Use Disk Utility to reformat the drive as FAT32
    3) Transfer everything back to the external drive
    2.0GHz MacBook 1st Gen   Mac OS X (10.4.8)   2GB RAM

  • I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive?

    I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive in Iphoto?

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • How do i format an external hard drive for use on both windows and mac book air?

    how do i format an external hard drive for use on both windows pc and mac book air?

    Use exFAT on the PC.
    (71374)

  • How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

    How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7.  HP computer intel Dual Core.  Thanks for any help!

    Hey idw3,
    Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/HT1364
    Regards,
    David

  • My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

    My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

    You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2.  USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head.   The fastest speeds you can typically get are about 300 Mbps.   Firewire, on the other hand, has very little overhead.  The fastest speeds you can get are very nearly 800 Mbps.  You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus.  Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it. 
    Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance.  A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
    USB 2 will work perfectly fine... just not as fast.
    Also... it's much safer to move the entire Aperture library than to "relocate masters".  Your images must be managed.  You can Aperture manage them, or you can manage them.  But someone has to manage them.  If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge.  If you do, you'll break the links to your masters and start having problems with missing masters.  If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
    Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.)  There are only two kinds of hard drives in the world:  (1) those that have failed and (2) those that are going to fail.  There are no exceptions to this rule.  Hard drives are cheap.  Backup software is built into Aperture and into your Mac.

  • How do I move my iTunes music library off my computer and onto Time Capsule, which I want to use as an external hard drive?

    Does anyone know how I can move my very large iTunes music library folder off the computer and onto my fourth generation time capsule, which I'd like to use as an external hard drive?

    This Apple support document may help.
    Do you also plan to use the Time Capsule disk for Time Machine backups?  If so, that approach has problems.  For one, you don't be backing up your music library.  For another, eventually Time Machine will consume all the space on that disk, which will cause problems for your music.

  • I have a new mini mac and i want to use my existing external hard drive but it needs to be reformated how do i do this without loosing all my old photos?

    i have a new mini mac and i want to use my existing external hard drive but it needs to be reformated how do i do this without loosing all my old photos?

    Formatting will erase the drive.
    You need to copy the photo's to either your old computer, the Mac Mini or to a new external drive and then decide what to do with your existing external drive.
    For example: You could use one External drive for Photo's and one external drive for Time Machine to backup both your Mac Mini and the Photo drive.

  • How can I backup an external hard drive using Time Machine?

    How can I backup an external hard drive connected to my MacBook Pro using Time Machine?

    Attach drive, open Time Machine preferences, be sure external drive is not in the Exclude list.

  • How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

    How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
    I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
    Someone, Please help

    Hi Allen,
    Is there any way to store the back up to Mac and restore after formating?

  • How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

    How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
    I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder.  I would like to be able to keyboard navigate to it in an efficient manner.  I tried to use the "Go to the folder" feature but was unable to.
    I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
    I hope I explained the question well.  Thank you for all of your help and time in tending to my inquiry.

    Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

  • Airport Extreme won't show the WD external hard drive I plugged into the USB port.  How do I connect my external hard drive to my network?

    I plugged in my WD external hard drive into my Airport Extreme via the USB port.  The hard drive will not show up in the disk section in the airport utility... How do I hook an external hard drive up to the airport extreme?  I have tried 2 different WD hard drives.  I must be missing something!!!
    Thanks!

    To be recognized by the AirPort for sharing, the WD HDD has to be formatted in either HFS+ (ideal) or FAT32. The easiest way to format the HDD is to use the Disk Utility in OS X.

  • I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

    I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

    Mixing files with data is not always great idea.
    See info here.
    Q3 http://pondini.org/TM/Time_Capsule.html
    Why not just connect the PC directly to the TC by ethernet and copy the files over?
    It is hugely faster and much less mucking around.
    In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
    There is more info here.
    http://support.apple.com/kb/HT1331

  • How do you dump a external hard drive from PC to mac

    How do i dump my external hard drive from a PC to my Mac

    If you don't see the external HD when you connect it to the Mac, then you need to use Disk Utility to format the XHD to a FAT32 drive. Once done it will read on the Mac and PC without any problems.

Maybe you are looking for

  • Adobe Acrobat 8.0 Standard Download link?

    Can anyone point me to or send me a Adobe Acrobat 8.0 Standard Download link? I cant find one anywhere. I already have my License Keys., Adobe Acrobat 8.0 Standard Download link?

  • Compiler issue when different case element names

    Hi Given this simple schema where two elements with the same name but a different case exist causes problems with the generated code. <?xml version="1.0"?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <xsd:element name="test"> <xsd:compl

  • Running a Transportable tablespace Script in hohup (background process)

    Hello I am trying to get this to run in the background, but am not having sucess: $ nohup `master_tts_transfer -e 10.87.90.204` & I am seeing the output on the screen, and if I exit the session then it kill the process. Any ideas are appreciated! Thx

  • Hello. Must have missed/overlooked some settings for my scanner.

    Hi. I'm just starting out in Photoshop and I am supposed to 'import' a scanned file. According to my  directions, my scanner should be listed as a choice in the 'import' menu but is not. I think I might have missed this step when I was installing Ps.

  • Adding column in table having millions of records

    Hi, Oracle release :11.2.0.3 Table A exists with millions of records. - has many indexes on it. Need to add one column which exists in table B with same no of records. Rowid is common join condition between table A and B to update this new column in