How to use Golden Gate for ETL purpose
Hi Oracle Gurus, i have a situation where i am thinking to replace our oracle PL/SQL package with Golden Gate to process our ETL.
I mean we use PL/SQL package, which has several procedures and functions in it and we process our application data using this package to transform that data for our downstream clients.
I was just wondering how we can achieve this using golden gate? Any suggestions will be appreciated.
Thanks a lot :)
Hi Annamalai
We have a ETL login in our local database, and ETL processed data is pulled by our down stream clients, We are seeing that current ETL is not capable enough to execute such a huge load. So we wanted to port our raw data to secondary database and run ETL login on secondary database and to parallelize it accordingly.
I was just thinking, can we use ETL logic inside OGG parameters, so we can load transformed data to secondary database. So no need of running ETL in secondry database. May be i sound little foolish, but just a thought.
Thanks
Abhi
Similar Messages
-
Hi, 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive as I ran pout of space. ALL my files are on copied on to the 4TB drive . How do I get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes THX .
Select the desired location in preferences, then consolidate the media files to it.
iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507 - Unfortunately this is misnamed. It should say "Change where your media files but not where your library files are stored" - more information at: https://discussions.apple.com/message/22026652#22026652 - and steps 5-8 in https://discussions.apple.com/message/24491967#24491967 -
I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
FrankThanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup. -
Migrating db using golden gate
Hi,
I heared about a word that is golden gate. which is used for migration.
how can migrate db using golden gate..? and where it has to install. is there any other features of this.
please let me know
thank youHi;
Please see:
Migration of an Oracle Database Across OS Platforms [ID 733205.1]
http://www.databasejournal.com/sqletc/article.php/3780766/Successful-Database-Migration.htm
Regard
Helios -
Golden Gate for mysql5.5 extract is Abended,and not error in the file
Dear All,
golden gate for mysql5.5 to oracle 11g,extract is Abended ,but there didn't have error in the log , And sometimes the successful extraction some records;
extract :
EXTRACT EXT_M1
TRANLOGOPTIONS AltLogDest /mydata/mysqllog/binlog/binlog.index
SOURCEDB [email protected]:16052, USERID mama,PASSWORD mama
sqlexec "set names gbk;"
EXTTRAIL dirdat/m1
Dynamicresolution
TABLE mama.merchants_member_card_customer;
datapump:
EXTRACT DPRD_M1
SOURCEDB [email protected]:16052, USERID mama,PASSWORD mama
RMTHOST 192.168.2.57, MGRPORT 7089, compress --COMPRESSUPDATESETWHERE
RMTTRAIL /home/oracle/goldengate/dirdat/m1
NOPASSTHRU
TABLE mama.merchants_member_card_customer;
GGSCI>>info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT RUNNING DPRD_M1 00:00:00 00:00:01
EXTRACT ABENDED EXT_M1 00:11:49 00:01:56
REPORT:
GGSCI>>view report ext_m1
Oracle GoldenGate Capture for MySQL
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230
Linux, x64, 64bit (optimized), MySQL Enterprise on Apr 23 2012 05:23:34
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-09-29 18:38:08
Operating System Version:
Linux
Version #1 SMP Wed Jun 13 18:24:36 EDT 2012, Release 2.6.32-279.el6.x86_64
Node: M46
Machine: x86_64
soft limit hard limit
Address Space Size : unlimited unlimited
Heap Size : unlimited unlimited
File Size : unlimited unlimited
CPU Time : unlimited unlimited
Process id: 6322
Description:
** Running with the following parameters **
2013-09-29 18:38:08 INFO OGG-03035 Operating system character set identified as UTF-8. Locale: zh_CN, LC_ALL:.
EXTRACT EXT_M1
TRANLOGOPTIONS AltLogDest /mydata/mysqllog/binlog/binlog.index
SOURCEDB [email protected]:16052, USERID mama100,PASSWORD ****************
sqlexec "set names gbk;"
Executing SQL statement...
2013-09-29 18:38:08 INFO OGG-00893 SQL statement executed successfully.
EXTTRAIL dirdat/m1
Dynamicresolution
TABLE mama100.merchants_member_card_customer;
2013-09-29 18:38:08 INFO OGG-01815 Virtual Memory Facilities for: COM
anon alloc: mmap(MAP_ANON) anon free: munmap
file alloc: mmap(MAP_SHARED) file free: munmap
target directories:
/home/goldengate/dirtmp.
CACHEMGR virtual memory values (may have been adjusted)
CACHESIZE: 64G
CACHEPAGEOUTSIZE (normal): 8M
PROCESS VM AVAIL FROM OS (min): 128G
CACHESIZEMAX (strict force to disk): 96G
Database Version:
MySQL
Server Version: 5.5.24-patch-1.0-log
Client Version: 6.0.0
Host Connection: 192.168.2.46 via TCP/IP
Protocol Version: 10
2013-09-29 18:38:08 INFO OGG-01056 Recovery initialization completed for target file dirdat/m1000000, at RBA 1295, CSN 000086|000000065228677.
2013-09-29 18:38:08 INFO OGG-01478 Output file dirdat/m1 is using format RELEASE 11.2.
2013-09-29 18:38:08 INFO OGG-01026 Rolling over remote file dirdat/m1000000.
2013-09-29 18:38:08 INFO OGG-00182 VAM API running in single-threaded mode.
2013-09-29 18:38:08 INFO OGG-01515 Positioning to begin time 2013-9-29 06:26:18.
** Run Time Messages **
2013-09-29 18:38:08 INFO OGG-01516 Positioned to Log Number: 86
Record Offset: 65223906, 2013-9-29 06:26:18.
2013-09-29 18:38:08 INFO OGG-01517 Position of first record processed Log Number: 86
Record Offset: 65223906, 2013-9-29 06:26:18.
TABLE resolved (entry mama100.merchants_member_card_customer):
TABLE mama100."merchants_member_card_customer";
Using the following key columns for source table mama100.merchants_member_card_customer: id.
2013-09-29 18:38:08 INFO OGG-01054 Recovery completed for target file dirdat/m1000001, at RBA 1316, CSN 000086|000000065228677.
2013-09-29 18:38:08 INFO OGG-01057 Recovery completed for all targets.
ggsevt:
2013-09-29 18:38:08 INFO OGG-00963 Oracle GoldenGate Manager for MySQL, mgr.prm: Command received from GGSCI on host localhost (START EXTRACT EXT_M1 ).
2013-09-29 18:38:08 INFO OGG-00975 Oracle GoldenGate Manager for MySQL, mgr.prm: EXTRACT EXT_M1 starting.
2013-09-29 18:38:08 INFO OGG-00992 Oracle GoldenGate Capture for MySQL, ext_m1.prm: EXTRACT EXT_M1 starting.
2013-09-29 18:38:08 INFO OGG-03035 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Operating system character set identified as UTF-8. Locale: zh_CN, LC_ALL:.
2013-09-29 18:38:08 INFO OGG-00893 Oracle GoldenGate Capture for MySQL, ext_m1.prm: SQL statement executed successfully.
2013-09-29 18:38:08 INFO OGG-01815 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Virtual Memory Facilities for: COM
anon alloc: mmap(MAP_ANON) anon free: munmap
file alloc: mmap(MAP_SHARED) file free: munmap
target directories:
/home/goldengate/dirtmp.
2013-09-29 18:38:08 INFO OGG-00993 Oracle GoldenGate Capture for MySQL, ext_m1.prm: EXTRACT EXT_M1 started.
2013-09-29 18:38:08 INFO OGG-01056 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Recovery initialization completed for target file dirdat/m1000000, at RBA 1295, CSN 000086|000000065228677.
2013-09-29 18:38:08 INFO OGG-01478 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Output file dirdat/m1 is using format RELEASE 11.2.
2013-09-29 18:38:08 INFO OGG-01026 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Rolling over remote file dirdat/m1000000.
2013-09-29 18:38:08 INFO OGG-00182 Oracle GoldenGate Capture for MySQL, ext_m1.prm: VAM API running in single-threaded mode.
2013-09-29 18:38:08 INFO OGG-01515 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Positioning to begin time 2013-9-29 06:26:18.
2013-09-29 18:38:08 INFO OGG-01516 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Positioned to Log Number: 86
Record Offset: 65223906, 2013-9-29 06:26:18.
2013-09-29 18:38:08 INFO OGG-01517 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Position of first record processed Log Number: 86
Record Offset: 65223906, 2013-9-29 06:26:18.
2013-09-29 18:38:08 INFO OGG-01054 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Recovery completed for target file dirdat/m1000001, at RBA 1316, CSN 000086|000000065228677.
2013-09-29 18:38:08 INFO OGG-01057 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Recovery completed for all targets.
2013-09-29 18:38:09 INFO OGG-01054 Oracle GoldenGate Capture for MySQL, dprd_m1.prm: Recovery completed for target file /home/oracle/goldengate/dirdat/m1000002, at RBA 1435, CSN 000086|000000055512672.
2013-09-29 18:38:09 INFO OGG-01057 Oracle GoldenGate Capture for MySQL, dprd_m1.prm: Recovery completed for all targets.GGSCI>>info ext_m1 showch
EXTRACT EXT_M1 Last Started 2013-09-29 18:38 Status ABENDED
Checkpoint Lag 00:11:49 (updated 00:12:05 ago)
VAM Read Checkpoint 2013-09-29 18:26:18.665841
Current Checkpoint Detail:
Read Checkpoint #1
VAM External Interface
Startup Checkpoint (starting position in the data source):
Timestamp: 2013-09-29 18:26:18.665841
Recovery Checkpoint (position of oldest unprocessed transaction in the data source):
Timestamp: 2013-09-29 18:26:18.665841
Current Checkpoint (position of last record read in the data source):
Timestamp: 2013-09-29 18:26:18.665841
Write Checkpoint #1
GGS Log Trail
Current Checkpoint (current write position):
Sequence #: 0
RBA: 917
Timestamp: 2013-09-29 18:30:55.655570
Extract Trail: dirdat/m1
CSN state information:
CRC: 20-82-1D-34
CSN: Not available
Header:
Version = 2
Record Source = A
Type = 8
# Input Checkpoints = 1
# Output Checkpoints = 1
File Information:
Block Size = 2048
Max Blocks = 100
Record Length = 20480
Current Offset = 0
Configuration:
Data Source = 5
Transaction Integrity = 1
Task Type = 0
Status:
Start Time = 2013-09-29 18:38:08
Last Update Time = 2013-09-29 18:38:08
Stop Status = A
Last Result = 0 -
How to use Batch operation for two xsodata services?
Hi All,
I have two xsodata services. How to use submit batch for two xsodata services
Thanks,
MjGateway Batch Calls from SAPUI5
-
How to use same actions for differ pop-up
Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethiHi,
Take one integer value attribute in the context of view
when you r performing action on POP1 set it's value to 1
when you r performing action on POP2 set it's value to 2
create one method which receives integer argument, say diaplay(int a)
In the action call display(wdContext.currentContextElement().get<intvariable>()) by passing the value in the context attribute
in display() method, Check the value of integer variable..
if it is 1 then perform action related to POP1
if it is 2 then perform action related to POP2
Regards
LakshmiNarayana -
How to use same actions for differ pop-up buttons
Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethiHi ,
u can use the method SUBSCRIBE_TO_BUTTON_EVENT of the IF_WD_WINDOW interface ... to handle the event fired by the popup .....used this method after creating the popup window ...
regards
Yash -
How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA
Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
ct_data-ta_guid = '000000000000000001'.
ct_data-equipment_ext = wa_itab-equipment_ext.
ct_data-descript = wa_itab-descript .
ct_data-valid_date = sy-datum.
ct_data-equicatgry = 'M'.
APPEND ct_data.
CLEAR ct_data.
ct_datax-ta_guid = '000000000000000001'.
ct_datax-equipment_ext = 'X'.
ct_datax-equipment = 'X'.
APPEND ct_datax.
CLEAR ct_datax.
it_descript-ta_guid = '000000000000000001'.
it_descript-text_language = wa_itab-text_language.
it_descript-descript = wa_itab-sdescript .
APPEND it_descript.
CLEAR it_descript.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'LTXT'.
it_longtext-text_line = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'aaaaaaaaaaaaaaa'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'bbbbbbbbbbbb'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'cccccccccccccccc'.
APPEND it_longtext.
CLEAR it_longtext.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
TABLES
ct_data = ct_data
ct_datax = ct_datax
it_descript = it_descript
it_longtext = it_longtext
return = return
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE : 'Successful'.
ENDIF.
IF NOT return IS INITIAL.
LOOP AT return.
IF return-type = 'A' OR return-type = 'E'.
WRITE : 'Error'.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH return.
ENDLOOP.
Regards
SUrendarHi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
ct_data-ta_guid = '000000000000000001'.
ct_data-equipment_ext = wa_itab-equipment_ext.
ct_data-descript = wa_itab-descript .
ct_data-valid_date = sy-datum.
ct_data-equicatgry = 'M'.
APPEND ct_data.
CLEAR ct_data.
ct_datax-ta_guid = '000000000000000001'.
ct_datax-equipment_ext = 'X'.
ct_datax-equipment = 'X'.
APPEND ct_datax.
CLEAR ct_datax.
it_descript-ta_guid = '000000000000000001'.
it_descript-text_language = wa_itab-text_language.
it_descript-descript = wa_itab-sdescript .
APPEND it_descript.
CLEAR it_descript.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'LTXT'.
it_longtext-text_line = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'aaaaaaaaaaaaaaa'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'bbbbbbbbbbbb'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'cccccccccccccccc'.
APPEND it_longtext.
CLEAR it_longtext.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
TABLES
ct_data = ct_data
ct_datax = ct_datax
it_descript = it_descript
it_longtext = it_longtext
return = return
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE : 'Successful'.
ENDIF.
IF NOT return IS INITIAL.
LOOP AT return.
IF return-type = 'A' OR return-type = 'E'.
WRITE : 'Error'.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH return.
ENDLOOP.
Regards
SUrendar -
How to use Web Serivce for not jsr 172 phone
Hi:
Is anyone know, how to use web service for phones that only have standard J2ME package installed (without jsr 172 web service packagenstalled)?
thank youHi,
I think you need to write the code for this from scratch (built on top of existing HTTP functionality). There may be open-source J2ME code you could use. I've never tried this so I'm afraid I don't know any more. But maybe that is what you were asking... i.e. does anyone have code that does this already...
Tx,
Sam -
How to use 2 GL for loss made on asset retirement w/o revenue ?
how to use 2 GL for loss made on asset retirement w/o revenue.
hello everyone
i have some trouble.
my company want to use 2 GL account for asset retirement
example some time use GL 6500001 some time use 6500002
in standard configuration AO90 , field loss made on asset retirement w/o revenue, there is only one field.
so i can use only one G/L.
it' s not good if i must to change configuration (and transport request )every time that user need to change GL.
now i got one idea.
i know that table T095 keep account determinaton and GL account data.
so if i make program that change data from table T095 directly. i donot need to change config everytime.
but i am not sure that this way will make impact other standard program or not.
i will wait for better idea from everyone.
please help.Substitution consist of several steps each with two parts:
1- Prerequisite
2- Replacement
If the prerequisite is satisfied (TRUE), substitution (Replacement) is performed.
Transaction Code: OBBH.
Thank you
Javed -
Explain how to use standard LSMW for MM01
Can anyone explain how to use standard LSMW for MM01 Tcode.pls explain briefly.
Hi
Create a project using 0020 as method.
Max -
How to use content conversion for Complex structure
Hi All,
I want to know how to use content conversion for the following complex structure:
Data
...Details 1 to Unbound
.....Header 1 to 1
.......HF1
.......HF2
.......HF3
.......ITEM 1 to unbound
.........ITF1
.........ITF2
all are of type string.
Thanks & Regards,
Viswanath
Message was edited by: Viswanath MenteHi,
In the content conversion,
give ur
1.document name as message type
2.give ur recordstructure as Details,,Header,1,ITEM,
3.mention ur keyfield.
conversion parameter
Header.fieldFixedLength - give the field lengths
Header.fieldNames=mention all the field name
Header.keyField=enter the value of keyfield
Header.endSeparator='nl'
repeat the same for Item
regards
jithesh -
How to use java api for function activity in embed oracle workflow?
because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........The Java Function Activity Agent is not certified for Oracle Workflow embedded in Oracle Applications. Installing standalone workflow should be a lot easier than what you have found, although it looks like you did hit a Pentium 4 issue with the Oracle Universal Installer. I suggest you contact Oracle Support or Oracle Consulting for assistance.
because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot........... -
i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckeyGSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards.
Maybe you are looking for
-
Can't figure out what the problem is, please help!
Hey, so I have a Mac Mini which I bought nearly 3 years ago. I've been running the latest system 10.6.6, when the issues started. Everything would just unexpectedly quit and occasionally, I'd get the "You need to re-start your computer..." grey scree
-
How can I print a pdf in the actual size with a page border?
How can I print a pdf in the actual size with a page border? (2 pages per sheet preferred) I usually print pdfs of books at a copy shop and they turn out fine. The problem comes when I try to print the same books at home. I use Adobe Acrobat X with t
-
How to Grey out the field "tracking number" during change mode in the order
HI Expert, How to grey out the Tracking number (AFVGD-BEDNR) at Order -> Operation tab -> external tab ->tracking number. during creation IW31 = not grey out and allow entry. for change mode IW32 = grey out if i set grey out at config OIOPD, it will
-
Just come back from a lengthy trip with about 900 photos from 3 different cameras. Did most of the jpeg's in LR 5, but waited with the Canon raw files for PS CC. All appeared to go well, with first adjusting them in PS CC camera raw, then opening som
-
Hi everyone, new iPhone user here. Is there anyway to sync the To Do's in my mac mail application to my iPhone 3gs? My notes sync with it but I don't know about the to do's. Thanks