How to use googel earth maps in gps

i want to use mops of google earth in gps

on the phone, goto www.googlemaps.com
then click on [maps with my location]beta. This page should indicate [N95] download.
good luck.
S

Similar Messages

How to use scheduling in Mapping?

Hi,
can i use the schedular in Mapping?.
I have created a schedule, but dont know how to use it in Mapping.
Does anyone some ideas oder example.
Thanks
Mandi

Hi Mandi
You configure the mapping and set the 'Referred Calendar' property.
See the viewlet below which does it (for Apps integration rather than database scheduler, but the steps are pretty much the same).
http://www.oracle.com/technology/products/warehouse/htdocs/concmgr/owbconcurrentmanager_viewlet_swf.html
Cheers
David

How to use navgation app,(map) on iphone 4s without internet ?

How tu use navgation app. (map) on iphone 4s withoutinternet ( by satellit )

You can't use the defalt Maps app without an internet connection. It's required to download the maps.
There are several nav apps in the App Store that have built-in maps and don't need an internet connection. TomTom and Navigon are two.

Blackberry Maps on Storm (Verizon) - How can I recenter the map during GPS tracking?

Greets folks!
I'm hoping someone has an answer, or can point me to documentation.
I've recently moved to a new city and have found the Maps app to be very helpful. However there's one nagging question that's driving me crazy; how can I recenter the map on my GPS position after moving the map?
I'll be using GPS navigation, and either accidentally or deliberately scroll the map. The GPS navigation icon still shows navigation is still taking place, and if I scroll the map manually back to my position it still shows the location icon. However the map no longer moves with the location icon.
Any way to set the map to center on the location icon again? The only option I've found so far is to stop and restart GPS navigation which takes time, etc.
John E.

Hello Falconeer and welcome to the forums!
When using the Maps application you should be able to snap back to your location so long as you have "GPS Navigation" set to started and your position is currently being tracked. If you pan off the course and lose sight of your position you should be able to press the "Escape" key immediately to the left of the "End Call" button while viewing the map. Just make sure that you only press it once or you may find yourself looking at the directions list again.
hope this helps
Message Edited by thundergeek on 07-24-2009 11:59 AM
-tg
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Use Google Earth (Maps) in Booklet?

Anyone can guide the full way to use Google Earth (or Google Maps) wit GPS in Booklet?
Thank you so much !!!

Use this guide to enable GPS. In Google Earth you then can track your position by going to Tools > GPS > Real Time (select NMEA, tick the follow box and click Start).
BTW, you need the very latest version of Google Earth (5.2.1.1547) for it. In the previous version was a bug that prevented GPS tracking.
I think Google Maps doesn't work with GPS. At least I haven't found a way to show my position (tried Chrome and Opera). Maybe they only use the IP to show your position. Don't know.

How to use the 'DatabaseOperation' mapping in iStudio?

I'm still a novice in using iStudio and would like to use the 'DatabaseOperation' mapping - but so far I've had no joy. For Test purposes I have created a function:
FUNCTION test_value (p_operator_name IN VARCHAR
, p_status IN VARCHAR) RETURN VARCHAR IS
l_return varchar2(100);
BEGIN
l_return := 'This is a test';
RETURN l_return;
END;
iStudio
Destination Field
$Test.s1
Source Field
DatabaseOperation (operator_name, status, "oaihub902", "***password", "***host", "1521", "***SID", "thin", "5", "20", "begin test_value(operator_name,status);end;")
Error
oracle.oai.agent.server.transform.database.DBTransformationException: PLSQLTrans
formation.transform: Transformation failed
I can't find any documentation on how to use this mapping .. so any help would be appreciated.
Cheers
Ed

I agree. The documentation is sketchy.
One point. Consider developing your own custom transformations instead of using the Database Operation transform.
I'm not sure about your client, but mine does not like having any passwords in the clear.
Also, custom transformations are portable from one environment to another. You often find that having to recode usernames and passwords within the Database Operation transformation from your DEV > TEST > PROD systems a bit of a pain.
HTH
Yan

How to use AUTO in Mapping name for EDIFACT

Hi
I have a source which will be posting 2 diff kinds of EDIFACT to XI.
I want to use just a single channel where i want to configure my .sda module.
I've seen that we can use 'AUTO' in MappingName parameter, so that the mapping is chosen dynamically.
However,when i tried to do so, i get an error saying that the adapter cannot find the mapping in the classpath.
Can anyone guide me as to how to use the AUTO parameter?
If possible, provide a link for some blog where they are using it.

Hi Alok,
Reason behing not getting the EDI payload was missing of splitter configuration, you need to configure the splitter as
you need to use AUTO mappingName instead of specific mapping name
once you configure split parameter of bic to true, it will generate an attacments like KEY|MAPPINGNAME|ACCEPTED|MessageNo
then based on this configuration splitter will look for the same key in Seeburger workbench configuration and then generates a XI message (SXMB_MONI entry) ...
If you dont want acknowledgement of EDI and sure about the version of the mapping then you can configure the mappingName
directly instead of AUTO...in BIC paramter
HTH
Rajesh

How to use XSLT for mapping feild names one by one to array element

I have a XSLT case to map all the attributes feild name(not value) which has no child to the target, which is array loop.
I give an sample below.
source:
<Items xmlns="http://www.example.org/sample">
<SourceSystem>SourceSystem2573</SourceSystem>
<TimeStamp>2010-01-17T20:54:08.234</TimeStamp>
<Item>
<ID>2574</ID>
<Type>2575</Type>
<Name>2576</Name>
</Item>
</Items>
source XSD like:
     <element name="Items" type="tns:ItemsType"></element>
     <complexType name="ItemsType">
          <sequence>
               <element name="SourceSystem" type="string" maxOccurs="1"
                    minOccurs="1">
               </element>
               <element name="TimeStamp" type="dateTime" maxOccurs="1"
                    minOccurs="1">
               </element>
               <element name="Item" type="tns:ItemType"
                    maxOccurs="unbounded" minOccurs="1">
               </element>
</sequence>
     </complexType>
<complexType name="ItemType">
          <sequence>
               <element name="ID" type="string" maxOccurs="1"
                    minOccurs="1">
               </element>
               <element name="Type" type="string" maxOccurs="1"
                    minOccurs="1">
               </element>
<element name="Name" type="string" maxOccurs="1"
                    minOccurs="1">
               </element>
</sequence>
     </complexType>
target need to be like:
<ns1:AttributesCollection>
<ns1:Attributes>
<ns1:fieldname>SourceSystem</ns1:fieldname>
</ns1:Attributes>
<ns1:Attributes>
<ns1:fieldname>TimeStamp</ns1:fieldname>
</ns1:Attributes>
<ns1:Attributes>
<ns1:fieldname>ID</ns1:fieldname>
</ns1:Attributes>
<ns1:Attributes>
<ns1:fieldname>Type</ns1:fieldname>
</ns1:Attributes>
<ns1:Attributes>
<ns1:fieldname>Name</ns1:fieldname>
</ns1:Attributes>
</ns1:AttributesCollection>
target XSD:
<xs:element name="AttributesCollection" type="AttributesCollection"/>
<xs:complexType name="AttributesCollection">
<xs:sequence>
<xs:element name="Attributes" type="Attributes" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="Attributes">
<xs:sequence>
<xs:element name="fieldname" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="100"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
I know we can use local-name() to get the tag/field name,
but I have not idea how to get these leaf field names one by one and then mapping to every array elements.
I tried whole day but no successful
Does anyone have some idea?
Thanks very much!
Keith
Edited by: user1065212 on 17-Jan-2010 22:50
Edited by: user1065212 on 17-Jan-2010 22:53
Edited by: user1065212 on 17-Jan-2010 22:59

can you paste source xsd and the correct xml output, the current one isn't really valid
<ID>2574</TotalNumOfItems>

How to use Action/Input maps

It seems to me that the move to sharing actions menus, buttons, and other components is a logical one, given that it is desirable to have all references to the action reflect its enabled state.
The question that arises is: which ActionMap object to use as the central store? Do you create your own and pass it on somewhere?
And, if you try to do anything with homegrown InputMaps then the components stop seeing the events. I wish there was a definitive YOU MUST DO IT THIS WAY tutorial.
Why is there no factory API that can create UI components pre-attached to actions and with accelerators or mnemonics already set? Then we would not need to write half the code we do now. My solution:
public class ComponentFactory {
   ActionMap myMap;
   public ComponentFactory(ActionMap map) {
      myMap = map;
   public JButton createButton(String actioncommand) {
       Action a = myMap.get(actioncommand)
       if(a==null)
          return null;
       return new JButton(a);
   public JMenuItem createMenuItem(String actioncommand) {
    // etc...
   public void setAction(Action a) {
       myMap.put(a.getValue(ACTION_COMMAND_KEY),a);
   public void setEnabled(String actioncommand, boolean state) {
       Action a = myMap.get(actioncommand);
       if(a!=null)
           a.setEnabled(state);
}Is there any concensus as to the best way to handle ActionMaps/InputMaps?

Hugh,
>
The tutorial is a touch short on this subject, whilst
it is good on how to create and use actions with
toolbars and the like, the section on InputMaps and
ActionMaps is far too brief to get the wider picture.
The API docs on the same is about one paragraph's
worth.okay, I just checked the tutorial - it's a bit short on the inputMap/actionMap indeed.
>
You are mixing up two different issues:
a) customize a button with an action
b) bind a keyStroke to an action for an arbitrary
jComponent
a) has nothing to do with b)If b) has nothing to do with a) why have MNEMONIC_KEY
and ACCELERATOR_KEY on the action?Hmm... where do you see a contradiction to my statement? Those keys are part of a) as they are used for customization of the AbstractButtons: the button's mnenmonic/accelerator properties are set to the corresponding values of the action. This propertyChange triggers an update of the keyBinding to the button's "pressed"/"doClick" actions as registered in the actionMap. They are never used (at least not internally by Swing) for b)
Historically the action is older than the inputMap/actionMap: basically it's an ActionListener (which is more or less a command pattern) plus some (view) state. This "plus" was designed right in the beginning of Swing for a) to enable state sharing between different "buttons" but not really integrated until version 1.4. parallel to that the need for a general mechanism of binding between keyStrokes and "commands" became obvious and inputMap/actionMap were introduced in 1.3. The only action state that's needed for this mechanism to work is the enabled property. All values are ignored - so currently they somehow appear to be overloaded in the context of the inputMap/actionMap. Personally I think they are very powerful because of this extra flexibility.
>
There is still not a single diagram; and I maintain
that it is less than useful to beginners who are not
familiar with the terminology used. Well, IMO diagrams are not everything - I still think it much easier to understand than the dnd spec or the focus spec f.i.
>
you are free to use whatever object you want as akey
- write a utility method to use the name, if feellike
doeing so. There is nothing in the framework that
would single out the name as "the" key to use, The keybindings document specifically states:
"New actions can be added to a component equally
easily."
"The conventional key for an action is it's
name." If there is a conventional way then it
should be encouraged with an appropriate API. I get your point. And I definitely agree on following a convention if there is one. Except when the convention is quite immature (to formulate mildly) - and not even followed by Swing internally: most of the default actions registered in the actionMap don't even have a name, the binding is done by string literals ... duplicated in at least two places: the XXLookAndFeel and the ui-delegates.
Greetings
Jeanette

How to use styled google maps in muse cc??

i've been searching for styled maps for muse but to no result.using google maps styler i generated a source code but its not usable in muse.
give me some suggestions please..
thanks..!!

    "featureType": "road",
    "stylers": [
      { "saturation": -92 }
    "featureType": "transit" },{
    "elementType": "labels.text.stroke" },{
    "stylers": [
      { "visibility": "on" },
      { "weight": 1 },
      { "lightness": -6 },
      { "hue": "#ffe500" },
      { "saturation": 8 }
its a javascript code..how can i implement it in muse...

How to use TopLink's mapping info at runtime

Can anybody kindly instruct how to do the following:
1) Once the "JavaSource.java" file or the "ProjectDeployment.xml" file is generated by TopLink from a TopLink project, how can it be included and used in a J2EE project at runtime? I understand that this step may be specific to the type of IDE used, let us say WebLogic, WebSphere or JDeveloper9i.
2) Can TopLink generate the file "sessions.xml" automatically or it has to be hard-coded? Does this file have also to be included in a J2EE project under the directory of META-INF at runtime?

Hi John,
Probably the best way I can explain the process of putting a J2EE app with TopLink into production would be to describe the best practices of doing so.
Firstly, I recommend using an IDE to develop your Java source code, although it is possible to generate Java source directly from the Mapping Workbench, this is considered more of a rapid prototyping or quick start process. Once the Java source has been compiled, the Meta-Data (project.xml) can be deployed from the Mapping Workbench.
The next step really depends on the type of application you are creating. Since you are developing a J2EE based application and it will be multi-user, TopLink recommends using a ServerSession architecture. (Consult the documentation for detailed explanations). Configuring the session can be done in a number of ways, the best way would be to use the SessionManager and an external file called sessions.xml. Both the sessions.xml and project.xml must be visible by the J2EE component that will be using it. (Servlet/Session Bean, etc...). This is done through managing your deployment properly using something like an EAR.
The key to getting the application and TopLink working together is the session, and here's a basic example on how you could set this up:
sessions.xml code:
<toplink-configuration>
     <session>
          <name>myProject</name>
          <project-xml>myProject.xml</project-xml>
          <session-type>
               <server-session/>
          </session-type>
          <connection-pool>
               <is-read-connection-pool>false</is-read-connection-pool>
               <name>default</name>
               <max-connections>10</max-connections>
               <min-connections>5</min-connections>
          </connection-pool>
          <enable-logging>true</enable-logging>
     </session>
</toplink-configuration>
Somewhere in your application code, you might have a login method that makes use of the SessionManager to load and create the session:
SessionManager sm = SessionManager.getManager();
          Server serverSession = (Server)sm.getSession("myProject", this.getClass().getClassLoader());
The sessions.xml must be created manually at this point, a future version of the TopLink product will contain an editor which will help out.
Darren Melanson

How to use error table in mapping level?

Hi all
Any one please tell me how to use error table in mapping level or how to handle the errors in mapping.
I am creating one error table in oracle but i dont know how to use it in mapping.
Thanks in advance.
Kumar

Hi Kumar,
You need to use Error Table along with the Data Rule .
Error tables are used with Logical error handlers (Data Rules). Detailed description on using data rules is explained in the following document
http://www.oracle.com/technology/products/warehouse/pdf/OWB10gR2_ETLandBusinessRules.pdf
In a nut shell usage of error tables is as follows.
1. Create a data rule associate it with a table (Target table or table in which you load data).
2. Use the table in a mapping as target table.
3. Deploy the table and mapping.
Now in the target schema one more table will be created with the name <target table name>_ERR. When a mapping is executed the data which violates the data rule gets into this error table.
The following has to be done to have error table name of customers choice.
1. Right click on the table and click configure.
2. Give the table name in "shadow table name" section.
3. Deploy the table.
4. Use this table in a mapping. Now in the mapping on this table properties in "Error Table Name" section the name of the table specified in "shadow table name" will be populated.
Thanks,
Sutirtha

How to use CrossReference and DVM in ODI &how to populate data into Xref

Can any one tell how to use Domain Value Maps and Cross Referencing in ODI?
DVM or Domain Value Map are created and used in ESB console of SOA suite.
My actual requirement is as follows:
The below steps describe loading data from ERP Application 1 to ERP Application 2.
1. The Source Application ERP APP1, populates the interface table using their native technology.
2. A job scheduler invokes the Source side ODI Package.
3. ODI then extracts the data from Source Interface table and populates the Target Interface table.
4. After populating the Target interface table the ODI populates the X-ref table with App 1 ID and generated common ID.
5. The ODI either deletes or updates the rows that were processed from the Source interface table.
6. On the Target Application ERP APP2, the native application extracts data from target interface table and populates target database there by generating ERP Application 2 ID.
7. A job scheduler on the Target application invokes the ODI package to populate the Application 2 ID onto the Xref table matching on the Common ID.
I just want to know :
1. How to populate data into the Xref table from Source datastore
2. And if data is successfully laoded from target datastore to actual base table of target then how to populate the target id into the cross reference table.

can anyone suggest me some answer, then it would be of great help?

Use variable in mapping

Hi!
How to use Variable in mapping ? I've tried #PROJECT_CODE.VARIABLE_NAME but execution ends with an error "Illegal character"
With regards,
PsmakR

There is no need to use package name if variable is locate in the same package with the interace. Else (according with documentation):
Referring to variable MY_VAR in your objects should be done as follows:
• #MY_VAR: With this syntax, the variable must be in the same project as the object referring to it. Its value will be substituted. To avoid ambiguity, consider using fully qualified syntax by prefixing the variable name with the project code.
• #MY_PROJECT_CODE.MY_VAR: Using this syntax allows you to use variables across projects. It prevents ambiguity when 2 variables in different projects have the same name. The value of the variable will be substituted at runtime.
• #GLOBAL.MY_VAR: This syntax allows you to refer to a global variable. Its value will be substituted in your code. Refer to section Global Objects for details.
• Using “:” instead of “#”: You can use the variable as a SQL bind variable by prefixing it with a colon rather than a hash. However this syntax is subject to restrictions as it only applies to SQL DML statements.
And make sure you declare it in the package as was suggested in the previous post.

How to use GPS with google maps in ios 6.01

How to use GPS with google maps in ios 6.01

Settings > Privacy > Location Services.
Make sure Safari is On.

How to use googel earth maps in gps

Similar Messages

Maybe you are looking for