How to use GPS on Nokia E65

i am unable to use GPS on my Nokia E65. can u please tell me how i can use GPS on my mobile fone. secondly tell me does it coast some thing

Depending on your software version Nokia maps can be used as a GPS programme. With the latest Version 2.0633.65.01 Nokia maps is included as a standard menu item.
Your other option would be to buy a Garmin Mobile XT pack which includes maps and navigation. Depending on your gegion the price will vary.
The E65-1 does not have a built in GPS receiver therefore you will also need to purchase a one. Nokia's LD-3W works well and is not that costly.
Lastly Nokia maps will cost you as it needs to be activated for full navigation functions. Once again this will depend on your region.
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Similar Messages

  • Nokia 5233 how to use gps

    How to use GPS on my Nokia 5233?
    Moderator's note: Edited post. Please post messages that are relevant to the subject to seek solution to the problem.
    Solved!
    Go to Solution.

    @82953
    Welcome to the forum!
    There is nothing to stop you acquiring a Bluetooth GPS receiver and enabling Bluetooth GPS as a positioning method upon your 5233 to utilise OVI Maps.
    Happy to have helped forum with a Support Ratio = 42.5

  • How to use GPS with google maps in ios 6.01

    How to use GPS with google maps in ios 6.01

    Settings > Privacy > Location Services.
    Make sure Safari is On.

  • How to use gps

    Hlow frenz,
    Please tell me how to configure and use gps service in nokia 5233.

    Unfortunately there is NO embedded GPS chip in 5233, so only Network GPS or Bluetooth GPS available as positioning methods.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How to use GPS on N95

    Hi,
    Plz can anybody help me out.. ive got a N95 for 3 months now... and i dont know how to use the GPS service. I reside in Mumbai INDIA. please if anyone can give me information from zero level.. about what all is needed to use this service..
    Saludos..
    SUNNY!

    i've been having the same problems. seems like symbian is pretty bad and doesnt make it easy for users to use the gps. i downloaded the maps and installed everything, but when i run the program, it either cant get a gps location, or is asking me to buy more services from nokia. prior to this, i was using a generic chinese phone with tomtom installed and it worked fabulous, and loaded immediately. from what i understand about the gps on symbian, you have to load all kinds of 3rd party software and make all kinds of modifications to the phone before you can start using programs such as tomtom or route 66. ive tried installing some other gps programs, but keep running into certificate problems. i really don't like symbian at all.

  • How to use gps on iPhone 5c to find other user location

    I need to know  how  to use the gps on my Iphone 5s  to find other phone location for the same account. Is there any video how to use it?

    See your other identical thread for other suggestions: https://discussions.apple.com/thread/5971044?tstart=30

  • How to use GPS to synchronize measurement at 2 different locations.

    The error of the starting time may < 10ns.

    Hi,
    You could use two cheap Garmin OEM GPS 18x LVC receivers for around 80 USD each (https://buy.garmin.com/shop/shop.do?pID=27594&pvID=14555).
    They "have bare wire for connection to a variety of
    applications; can output data in NMEA 0183 format (industry standard)
    or proprietary Garmin format; provides a pulse-per-second logic-level
    output with a rising edge aligned to within 1 microsecond of UTC time".
    You should connect TTL PPS signal to the Counter Input of the DAQ Card and use it as a trigger or timing source. On RS-232 interface you have ASCII info about position and current time (every second). Version 5 PPS is also available.
    Details about using GPS for DAQ sync could be found on NI pages. Try "GPS synchronisation.
    Important: selecting receiver look for PPS (Pulse-per-Second) signal availlability. 
    My app. runs on two PXI's with DSA cards and PXI-6602 as a GPS18xLVC timing interface.

  • How to use GPS Maps

    Hello Friends,
    I have bought a E66 phone recently, kindly inform me how do I use the GPS maps of Australia, please give a detailed instructions as I am a cave man when it comes to technology, thanks
    Ras

    Hi ras1
    Firstly was a microSD provided with your E66 which possibly could have regional maps pre-loaded but not necessarily?
    1) Assuming that you have an available microSD > 2GB inserted in E66, start Nokia Maps application which will create necessary folder structure on memory card required later. If you accept "Go-online at start up" and you have a GPRS data connection as your access point, you can zoom in and out using "+" and "#" keys and provided that bars beside satellite icon have changed from yellow > green you should see your location on map although map data may have to be downloaded if not present.
    2) You will need to download regional maps to your device using Nokia Maploader v2.0.2 application available here:
    http://europe.nokia.com/A4984199
    I am assuming that you have already downloaded Nokia PC Suite v7.0 from here: http://europe.nokia.com/pcsuite and not loaded version from CD provided with E66 which by now may be outdated.
    3) If you launch Nokia Maploader it instructs you to connect your device in default "PC Suite" mode (you should be prompted on connection if you have not altered default).
    If you get "Waiting for device" and nothing happens try connecting in "Data transfer" mode instead. You will see the various continents and need to click on to explode content.
    4) If you intend to purchase a "voice navigation" license for real-time navigation, you should also download either English(US) or English(UK) voice file as well as regional map. Without a "voice navigation" license you can see your position on map and plan journeys although map won't be orientated in direction of travel.
    You might like to look at Nokia maps 2.0 User guide here:
    http://europe.nokia.com/EUROPE_NOKIA_COM_3/Explore_services/Nokia_Maps/Support/Maps_2.0/guide/Maps_S...
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How to use GPS with n73?

    hihi, just bought n73 couple days ago, i am new to this cellphone thing. can any1 tell me how can i have gps with my n73. like procedures, accessories and softwares i need to get it to work. is there a step by step guide.

    I dont think it needs A-GPS with an external GPS receiver because it gets a lock so easily. I started mine from cold this morning (ie from off not standby) and had a lock in about 20sec. From standby I usually get a lock in 10-15 sec.
    I was just about to buy an N95 when the new ones were announced so I'm holding off but I always thought I would more often than not use the LD-3W with the N95 while driving anyway. I think you can do that. No loss because I'll give the N80 to the boss (wife) anyway.
    N95 8GB (v20)

  • How to access GPS from Nokia 5130 Xprssmusic?

    I have Downloaded one GPS app for my Nokia 5130 xpresmusic. But when i run the app; at staring, app shows one message that is, "No selected GPS receiver" and when I go to connect to GPS receiver manually, app automatically starts Bluetooth and again shows previous message. I am not getting what should I do now????? 
    Rahul More

    I don't know about GPS receiver.... According to some other expert suggestion, I need external GPS receiver which is one gadget which use to access GPS via Bluetooth of phone 
    I am developing a J2ME GPS based app & I am new in the GPS development field. For app testing purpose I want to connect my 5130 to GPS. I saw the specification of 5130 in that GPS & Location API(JSR 179) is absent that means my phone will not access GPS??
    Is there any possibility to add Location API or GPS in my phone?? 
    Rahul More

  • How to use GPS device connected to USB to Serial TTL connector

    Hi,
    In case Lesson 3, I found the code to open UART as follows.
          uart = DeviceManager.open(UART_DEVICE_ID);
    This is the case that ttyAMA0 is used.
    I would like to use USB to Serial TTL connector.
    Could you let me know into what I need to change the code above?
    Thanks,
    Marvin

    Hi Marvin,
    assuming new device has name like "/dev/ttyUSB0" you can use following code
    UARTConfig cfg = new UARTConfig("ttyUSB0", DeviceConfig.DEFAULT,  115200, UARTConfig.DATABITS_8, UARTConfig.PARITY_NONE, UARTConfig.STOPBITS_1, UARTConfig.FLOWCONTROL_NONE);
    UART gps = DeviceManager.open(UART.class, cfg);
    /Sergey

  • How to use Skype on Nokia E52?

    how can i use skype use
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content.

    Given that the OP posted three months ago, I would presume that s/he has figured things out by now.
    Regards.

  • How to use GPS without data

    Hello Guys,
    Just want to know what app I may use to use my Iphone 6+ with an GPS without the need to use the celular data.
    I would appreciate your support.
    thanks
    Jose

    Hi Fallmists,
    To enable your iPhone 4 to be on Wi-Fi when in Canada, please use these steps below. These steps will allow you to connect to a Wi-Fi where it is available instead of you using a wireless network. Also, when you are using your Wi-Fi, the GPS would work off that Wi-Fi connection. I also understand you do not want Data Roaming wile in Canada. Please bear in mind, if you should need to use Data functions in Canada, this would be Data Roaming billed at the roaming rate of $0.002 dollars per kilobyte. Also, if you make calls while in Canada, it is $0.69 a minute for international roaming. Here is a link for international services information for additional assistance.
    To enable Wi-FI:
    1. From the home screen, touch the Settings.
    2. Touch Wi-FI.
    3. If Wi-Fi is not active, slide indicator to On.
    4. To join a network device will display available networks, tap desired network and enter security password if needed.  
    For more assistance with your iPhone 4, please refer to this link for website on the support page. Please use the pull-down tab to select the specific iPhone 4 device you have to access information and tips.

  • Using GPS with nokia N95

    Hello.Does anybody know if I save all the maps on the memory card(8GB),do I still need internet conection?I want to travel in few countries in Europe so I got to know.Thank You.  

    No, provided that you have all necessary map data and licneces on the phone, you do not need to make a connection to the internet as you travel.
    To ensure no connection is made:
    (1) In Nokia Maps, go Options>Tools>Settings>Internet>Go online at statup>No
    (2) In the phone itself, go Menu>Tools>Settings>General>Positioning>Positioning methods and swtich off Network-based and A-GPS.

  • Problem with GPS on Nokia Ovi Maps

    Hello everybody! I have a problem with GPS on my Nokia E90. Please can anybody help me with this problem. When i try to find my location using GPS with Nokia Ovi Maps the program show me a table like in the picture, but if i use Google Map the GPS work fine.
    Please can anyone help me to fix this problem??? Thanks!
    Solved!
    Go to Solution.
    Attachments:
    Scr000016.jpg ‏152 KB
    Scr000015.jpg ‏189 KB

    Some days ago i just format my mobile but till now the GPS on Nokia Ovi Maps wokrs fine.  I just don't know why after i format my mobile the Ovi shows me this message.
    When i go to Menu -> GPS -> GPS Data -> Navigation -> Options -> Satellite status, my phone shows me this mesage:
    1-st image is when i am inside of my room and
    2-nd image is when i am outside of my room.
    Can you tell me what does this message mean???
    Anyway thanks man for your help!
    Attachments:
    1-st image.jpg ‏59 KB
    2-nd image.jpg ‏62 KB

Maybe you are looking for

  • ALV report value is not coming in output

    Hi all, I have developed one ALV report using ABAP OOPS. i have used Custom Container to display my all values. below are the methods i am calling to dispaly and all values is coming in T_DATASET[] ans fcat, But after Executing my report it is not di

  • My Time Machine can't see/connect to my NAS Thecus

    Hello, I have NAS Thecus  N7700Pro V2. I got it to be my network storage and I enabled teh AFP in my NAS to be able to use my Time Machine backup. My current OS is Lion 10.7.5. When I open teh Time Machine and try to connect it to my NAS it can't see

  • Contact Groups disappeared with Iphone 5

    What did Apple do to "Groups" in Contacts with the new Iphone 5? I have close to 500 contacts and NEED groups.  I called several months ago after I upgraded the phone and they promised to "look into it" There is a "Contact Lite" download and voila...

  • How to change content repository database

    I'm migrating a test environment from a single-server to use a separate machine for the contentdb data. I can't find how to point the contentdb middle-tier application at the new database and install the contentdb schema. Can anyone give me some guid

  • Multiple ejb modules

    Welcome evry body, i need your help since i am new to ejb technology. I have a J2EE application with multiple ejb modules, my problem is how to make ejb1 located in ejb-module1 instantiate ejb2 located in ejb-module2 in my ejb-module1 ejb-jar.xml dep