How to use GPS to synchronize measurement at 2 different locations.

The error of the starting time may < 10ns.

Hi,
You could use two cheap Garmin OEM GPS 18x LVC receivers for around 80 USD each (https://buy.garmin.com/shop/shop.do?pID=27594&pvID=14555).
They "have bare wire for connection to a variety of
applications; can output data in NMEA 0183 format (industry standard)
or proprietary Garmin format; provides a pulse-per-second logic-level
output with a rising edge aligned to within 1 microsecond of UTC time".
You should connect TTL PPS signal to the Counter Input of the DAQ Card and use it as a trigger or timing source. On RS-232 interface you have ASCII info about position and current time (every second). Version 5 PPS is also available.
Details about using GPS for DAQ sync could be found on NI pages. Try "GPS synchronisation.
Important: selecting receiver look for PPS (Pulse-per-Second) signal availlability.
My app. runs on two PXI's with DSA cards and PXI-6602 as a GPS18xLVC timing interface.

Similar Messages

How to use GPS with google maps in ios 6.01

How to use GPS with google maps in ios 6.01

Settings > Privacy > Location Services.
Make sure Safari is On.

Nokia 5233 how to use gps

How to use GPS on my Nokia 5233?
Moderator's note: Edited post. Please post messages that are relevant to the subject to seek solution to the problem.
Solved!
Go to Solution.

@82953
Welcome to the forum!
There is nothing to stop you acquiring a Bluetooth GPS receiver and enabling Bluetooth GPS as a positioning method upon your 5233 to utilise OVI Maps.
Happy to have helped forum with a Support Ratio = 42.5

Cannot publish Excel workbook to Sharepoint 2010 : "You can't open this location using this program. Please try a different location"

I am trying to save an Excel 2010 file to a Sahrepoint 2010 document library but keep getting the error:
"You can't open this location using this program. Please try a different location"
Googling this suggests enabling "Desktop Experience" on the server which I have done. Excel Services Application is Started.
Has anyone come across this and been able to resolve successfully? I am wondering if this is more security related but the security set-up looks fine.
Any suggestions?
Thanks

Hi Sally, thanks for the response. Problem is the issue occurs with all users not just me.
On the server-side do you know if the full Office installation must exist for this to work?
The reason I think it may be security related in some way is that on another server we can access one site collection but not another. The first site collection shows the various libraries available and the other gives the same error: "You
can't open this location using this program. Please try a different location".
It's proving to be very frustrating!

How to use GPS on Nokia E65

i am unable to use GPS on my Nokia E65. can u please tell me how i can use GPS on my mobile fone. secondly tell me does it coast some thing

Depending on your software version Nokia maps can be used as a GPS programme. With the latest Version 2.0633.65.01 Nokia maps is included as a standard menu item.
Your other option would be to buy a Garmin Mobile XT pack which includes maps and navigation. Depending on your gegion the price will vary.
The E65-1 does not have a built in GPS receiver therefore you will also need to purchase a one. Nokia's LD-3W works well and is not that costly.
Lastly Nokia maps will cost you as it needs to be activated for full navigation functions. Once again this will depend on your region.
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

How to use IMPEDANCE ANALYZER to measure input $ output impedance of BJT circuit

Am currently doing experiments by using NI ELVIS IMPEDANCE ANALYZER but am now suffering a problem on how I can connect it so as to measure input and output impedance of a BJT circuit.
My circuit is as shown in my attachment.
Attachments:
ni.docx ‏46 KB

I see that you already posted on another thread. Please refer to it here:
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/HOW-TO-USE-ELVIS-IMPEDANCE-ANALYZER-TO-MEASUR...
Regards,
Nathan S.
Applications Engineer
National Instruments

How to use gps

Hlow frenz,
Please tell me how to configure and use gps service in nokia 5233.

Unfortunately there is NO embedded GPS chip in 5233, so only Network GPS or Bluetooth GPS available as positioning methods.
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to use GPS on N95

Hi,
Plz can anybody help me out.. ive got a N95 for 3 months now... and i dont know how to use the GPS service. I reside in Mumbai INDIA. please if anyone can give me information from zero level.. about what all is needed to use this service..
Saludos..
SUNNY!

i've been having the same problems. seems like symbian is pretty bad and doesnt make it easy for users to use the gps. i downloaded the maps and installed everything, but when i run the program, it either cant get a gps location, or is asking me to buy more services from nokia. prior to this, i was using a generic chinese phone with tomtom installed and it worked fabulous, and loaded immediately. from what i understand about the gps on symbian, you have to load all kinds of 3rd party software and make all kinds of modifications to the phone before you can start using programs such as tomtom or route 66. ive tried installing some other gps programs, but keep running into certificate problems. i really don't like symbian at all.

How to use gps on iPhone 5c to find other user location

I need to know how to use the gps on my Iphone 5s to find other phone location for the same account. Is there any video how to use it?

See your other identical thread for other suggestions: https://discussions.apple.com/thread/5971044?tstart=30

I am looking for an example of how to use the Rendezvous synchronization object.

I can't seem to find an example that uses the TestStand Synchronization Step Types. I am specifically interested in the Rendezvous type. I am have programmed quite a few VC++ applications that use semaphores, so I am familiar with the overall idea of sync objects.
Thanks in advance.
~tony

Here is a pretty good example that illustrates the benefits of multithreading over single threaded tests, and it utilizes a rendezvous to synchronize its multiple threads (see attachment to this post).
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask
Attachments:
Rendezvous_Demo.zip ‏81 KB

How to use shared variables to measure analog input

Dear All,
I am using Real time remote system. I am using PXI-6259 card, PXI-8184RT controller and PXI-1031 Chassis.
I want to use shared variable to measure and analog Input(voltage) from
an analog input Channel. I tried attaching it with the physical
channel using the bind to source option but it idoes not seem to work,
can any one give me any suggestions?
Screen shot of this is available.
I tried using the Acq and graph example and deployed it to the RT but
the Sine wave I input in the measurement channel becomes highly
distorted when I see it in the host.vi, there is also a Screen shot of
this also. Is there any other option.
What am I doing wrong? all suggestion are highly welcome.
Thank you.
Sincerely,
Munir Afzal Bhatti.
Attachments:
SV2.jpg ‏2305 KB
SV3.jpg ‏2305 KB

You will have to give us the whole picture. What is your client computer; a PAC, desktop etc? What are you running on the client computer; a VI or an executable? Where are you going to deploy your library? On the host machine or the client machine?
If I assume that you are running a VI on the client machine and are depolying the library on the host, all you have to do is to create another shared variable and bind it to the variable on the host machine. You can do this by checking the Bind to Source option when creating the variable and browsing to the network item in options. Be sure to have the library deployed on the host side before you attempt to do this otherwise you won't be able to find the variable.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Using ichat av from work and home (different locations

Hi, I have a .mac account and have two different locations. How can I use ichat av at the same time to talk to home from the office or vice versa?
Any help/suggestions would be appreciated.
Thanks

HI Gunter,
Glad to have helped.
Hint time.
New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
Alternatively, you can change the status to Answered.
If we use the forums properly they will work well...
2:00 PM Thursday; May 18, 2006

How to add several hyperlinks in a graph on different location

Hi,
I have been able to create hyperlink using srw.set_hyperlink() for text report.
I create a bar graph to show data monthly, (Jan, Feb, ..., Dec), thus showing 12 bars in a bar graph.
I need to make different hyperlink (to drill down) for each month.
So when user click one of the bar (i.e January bar), then it will drill down to data for January.
Is there possible to create several hyperlinks in a graph, to link to different location?
If possible, where should I put the srw.set_hyperlink()?
How can we handle, the location to be placed with the srw.set_hyperlink()?
What if it is a pie graph, can we do the same?
Many thanks,
Buntoro

Hi Fazith,
thanks for your answer.
I have tried it:
a=CROSSTAB_1.getSelectedMember("OD_NW_Regio").text;
APPLICATION.opennewWindow("http://www.wetter.net/47/"+a);
For testing, I want that the name of the city which is filtered with Dimension OD_NW_REGIO should be added to the url wetter.net (it should show me the weather for the selected city).
But this script didn't work. I think i have to define "a" or not?
And according to the onselect function, will the separate report (in this case the weather-side for the selected city) open automatically, or must I click anything?
Thank you for your help.
Kind regards,
Heike

How to use GPS with n73?

hihi, just bought n73 couple days ago, i am new to this cellphone thing. can any1 tell me how can i have gps with my n73. like procedures, accessories and softwares i need to get it to work. is there a step by step guide.

I dont think it needs A-GPS with an external GPS receiver because it gets a lock so easily. I started mine from cold this morning (ie from off not standby) and had a lock in about 20sec. From standby I usually get a lock in 10-15 sec.
I was just about to buy an N95 when the new ones were announced so I'm holding off but I always thought I would more often than not use the LD-3W with the N95 while driving anyway. I think you can do that. No loss because I'll give the N80 to the boss (wife) anyway.
N95 8GB (v20)

How to use GPS Maps

Hello Friends,
I have bought a E66 phone recently, kindly inform me how do I use the GPS maps of Australia, please give a detailed instructions as I am a cave man when it comes to technology, thanks
Ras

Hi ras1
Firstly was a microSD provided with your E66 which possibly could have regional maps pre-loaded but not necessarily?
1) Assuming that you have an available microSD > 2GB inserted in E66, start Nokia Maps application which will create necessary folder structure on memory card required later. If you accept "Go-online at start up" and you have a GPRS data connection as your access point, you can zoom in and out using "+" and "#" keys and provided that bars beside satellite icon have changed from yellow > green you should see your location on map although map data may have to be downloaded if not present.
2) You will need to download regional maps to your device using Nokia Maploader v2.0.2 application available here:
http://europe.nokia.com/A4984199
I am assuming that you have already downloaded Nokia PC Suite v7.0 from here: http://europe.nokia.com/pcsuite and not loaded version from CD provided with E66 which by now may be outdated.
3) If you launch Nokia Maploader it instructs you to connect your device in default "PC Suite" mode (you should be prompted on connection if you have not altered default).
If you get "Waiting for device" and nothing happens try connecting in "Data transfer" mode instead. You will see the various continents and need to click on to explode content.
4) If you intend to purchase a "voice navigation" license for real-time navigation, you should also download either English(US) or English(UK) voice file as well as regional map. Without a "voice navigation" license you can see your position on map and plan journeys although map won't be orientated in direction of travel.
You might like to look at Nokia maps 2.0 User guide here:
http://europe.nokia.com/EUROPE_NOKIA_COM_3/Explore_services/Nokia_Maps/Support/Maps_2.0/guide/Maps_S...
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to use GPS to synchronize measurement at 2 different locations.

Similar Messages

Maybe you are looking for