How to use hdmi converter make notebook video become high-definition

Yesterday, i bought a notebook. When i connect with my TV and watch video. it is not definition. I ask for my friend. he told me that get a hdmi converter from hdgenius.com and use hdmi converter make signal become hdmi,Then it will become high-definition and watch perfect video. It is OK ?

Hey there SSaccio,
I'm having a little trouble determining exactly which system is yours. The site everymac.com has a list of all standard mac products and I don't see a 2.4 G5. So the info I'm going to give you is based on the 2.3 G5 duo.
This model ( http://www.everymac.com/systems/apple/powermacg5/stats/powermac_g5_2.3dp.html )
Has the ATI Radeon 9600 with 128 MB of DDR SDRAM occupies an 8X AGP Pro slot. Dual monitoring is supported with this card up to 1920x1200. So you might be good to go with what you have already. If you know that you don't have this card, then let me know what you have and I might be able to suggest something else.
BTW
Graphics cards for Mac have a different card BIOS (or firmware, whatever it's called) than the PC versions. Therefore, you can't use a PC card in a Mac and viceversa, without reflashing it.
Nvidia, unlike ATI, does not sell their Mac cards as retail cards.
So if you don't have the ATI Radeon 9600 card then that's what you wanna get. It runs about $150-200
Cheers
-B

Similar Messages

Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"

Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
Everything is fine.
-They are the right format
-Quicktime is updated
-I have tried simply dragging them into the 'movie' library
-I have tried going to file<add file to library
Nothing works, has anyone else had this problem and found a way around it?
Any and all help appreciated.

In addition to Mike's suggestions, you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.

AVCHD / "Advanced Video Codec High Definition" & Cheap cams & Linux?

Hi!
A customer of mine seems to have his mind set on the general awesomeness of the "Advanced Video Codec High Definition". I can't seem to understand why anyone would want to have a multi-track video editor work with that random assortment of specs - at least as long as it's coming from a (relatively) cheap cam...
So my first impression: "The cam costs significantly less than 20000$ and therefore the video quality can't really get noticeable worse if one just converts the video files with ffmpeg to whatever '60 minutes of video per CD' format it sees fits".
Am I wrong / missing the point? Do you have any experience with "Advanced Video Codec High Definition" cams & archlinux / gnu software etc that should concern me?
Thanks!

So... does that mean, that usually the cams just encode with one of those "generic-jpeg-intel-codecs" (or don't compress at all) and the client-side software (that isn't used on a linux platform anyway) or something else does the rest? Or what would be a realistic / common scenario?
Also: for someone who didn't pay much attention to "video standards" in the past, just to understand the general principle... which one of the following two is closer to "the truth"?
(a) To ensure high video quality, it needs to be taken care of that in every step between the camera recording the raw video and burning the finished / rendered "movie" onto a portable medium, the software & hardware is capable of working with the advantages of "AVCHD".
or
(b) Someone obviously has been going around putting AVCHD-stickers on random objects and telling people to buy only those. If one just ignores those stickers, everything should be just fine.
And finally: Does anyone have a cam that says its "AVCHD" and used kdenlive or something & other open software to do a DVD of some sort? Was everything in between manageable with a "normal modern desktop pc" (no highend hardware)?
It seems to me like you are looking for some documentations so go there http://www.vcodex.com/h264overview.html and skip to the section 4 "h264 in practice"
Basically h264 advantage is for the same video quality, your clip takes much less space (or for the same space it will have better quality). But it will need more power to decode/encode.
Even a "low-end" camera like for example the Panasonic Lumix TZ7 (one of the best compact I think) offers 9Mbps, 13Mbps or 17Mbps when you record AVCHD. With those bitrates a "generic-jpeg-intel-codecs" will be okay. (actually the generic-jpeg-intel-codecs on the cam is a dedicated Digital Signal Processing chip aka DSP chip)
proposition (a) everything capable of working with AVC/h264 can work with AVCHD, it's just a marketing name, there is no special features.
Ensuring high quality is another beast, online guides and common sense help: the less you convert (colorspace for example) or reencode, the less information you will lose.
(b) AVCHD just means the cam can record in h264 instead of DV or Motion Jpeg.
For your final point, beyond a bitrate of 3Mbps dual-core Core 2 Duo CPU feels really sluggish when encoding to h264 but they are good enough to encode to dvd/mpeg2 format. I can't say about kdenlive/openshot/cinelerra and other NLE though, but every open source NLE can work with AVC-HD (via gstreamer or ffmpeg).
Like Gusar asked, it would be great if you can tell us your workflow.

Do the Cinema Displays present video in high definition?

If I were to plug in a an internal or external blu ray or hd dvd player to my mac (not even sure if they exist), would a 23-inch or 30-inch cinema display be capable of displaying the video as high definition video?
Thanks.

Malcolm Rayfield wrote:
Some cable boxes provide a FireWire port that you can use with iRecord.
You can get over the air, and some cable, HDTV with some Elgato devices.
I have a Motorola HD receiver from my cable company, and it does have two FireWire ports on the back.
I use a Plextor ConvertX TV402U with the cable box now (via S-Video out), along with the Elgato EyeTV software. This converter decodes the video no matter what, so I'm always seeing compression artifacts. It has no option for uncompressed HD, and I even tried (and returned) an Elgato EyeTV Hybrid device because I misread the site and thought that it'd display uncompressed HD.
The EyeTV Hybrid device would only show true HD if it was an over-the-air HD broadcast, and it could not display uncompressed HD from any set-top box.
In fact, neither of the aforementioned devices can even output digital video; they both output analog video to the Mac.
Is there definitely a way to connect my HD set-top box to the Mac via FireWire? I've never heard of iRecord, and as I said, I currently use EyeTV.
As an aside, I am also curious about the BluRay/HD DVD drive query, as I'd ultimately like to get one or the other once the "standard" is set.
Thanks!

Making Video into High Definition in Final Cut Express

I just took some video in high definition with my high definition camera. I want to edit them in Final Cut Express, but when I import them, they show up as standard definition, not high definition. How can I change it into high definition?
Thanks,
Sam

G'Day Sam,
You have have either downcoverted in the camera during capture or have an incorrect Easy Setup.
If you downconverted accidently it requires re-capture with the correct camera settings.
What are the clip properties?
Al

Standard definition (DV) video or high definition (HD)

Does anyone know a method to determine whether imported imovie files is standard definition (DV) video or high definition (HD)?
Thanks

In addition to what Shippey said, the DV files will be imported as in the DV file container and HDV or HDAVC will be converted to AIC and placed in an MOV file container. (I.e., you can simply look at the file extension and tell the difference when the options are limited to DV or HD camcorder imports and not including the possibility of HDD or DVD SD files.)

Dv5-1126em Entertainment Notebook PC IDT High-Definition Audio CODEC Driver can not be updated

dv5-1126em Entertainment Notebook PC IDT High-Definition Audio CODEC Driver can not be updated the system says that your computer has a sound device problem and cant play multiple sound in my pc

I want the sound of the original dv5-1126em
All that on-site works strange noises as if from outer space, my friend works noise and hassle
Please correct some of them sir

Does using HDMI cables make a difference?

For this level of video quality, does it make a difference to use HDMI vs. just RCA?

For this level of video quality, does it make a
difference to use HDMI vs. just RCA?
The HDMI connection passes digital signals; the RCA (component) one passes analog signals. In theory, transferring the signals in the digital domain should yield higher quality video, all other things being equal.
This is because binary digital signals have only two values, on or off, while analog ones have a continuous range of them. Thus, digital transmissions are immune to signal degradations small compared to the 'all the way on' or 'all the way off' signal range, while analog ones are directly affected by them.
However, because HDMI is a multi-core connection (several conductors are in the cable), & it is desirable to make the cables thin, flexible, & easy to handle, it is more difficult & expensive to manufacture multi-core cables with these & the appropriate electrical characteristics compared to a set of conventional (single-core) cables intended for transmitting individual analog video components.
Since the electrical characteristics of the cores become increasingly important for passing high quality signals with increasing cable lengths, this generally isn't a concern for short cable runs like most people would use between Apple TV's & other HDMI devices co-located in one cabinet, but is a concern if (for example) the Apple TV must be connected by a long cable to a remote display across the room.
So basically, go with HDMI (or DVI) for short cable runs. For longer ones, consider both. Distance, cost, & cable space considerations will generally interact to determine which is best for you.

TS1409 How do I mass convert all my videos in iTunes From FLV to MP4?!!

My problem is a simple one that YOU will, sooner or later, face---else you already faced it. It is the DREADED mixed media from You Tube. HOW DO I MASS CONVERT MY ITUNES FLV VIDEOS TO MP4 VIDEOS. If MP4 will play Video & Audio---why do I need FLV files?
1. I have an old APLINE IDA-X001 Digital Automobile Receiver that I have ported my iPOD Classic to via their Alpine Proprietary High Speed USB2 Cable.
2. I have 800+ You Tube music videos from the 80s (what can I say, WE ARE ALL ENTOMBED IN THE MUSIC OF OUR YOUTH and I am a couple of months older than Steve Jobs---Double Nickel or should I say YEAR ZERO of our lord Rock & Roll!!!). When driving, I just want to hear the Audio Files from my iPOD.
3. 90% of said You Tube videos are in Flash Video (FLV), 10% are MP4.
4. You can only play FLV on outputs that have videos, MP4 videos can play in video mode else audio only mode---THEREFORE I NEED TO CONVERT all my FLVs to MP4s on my iPOD Classic (160GB).
5. Yes, there are a handful of FREE Video Converter programs out there and the one I have AV8 will convert FLV to MP4 one file at a time...drip,drip,drip!!!
6. I have 800+ Music Videos---I will have died from old age before my iPod is filled.
7. My DESIRED END STATE is to flip a software switch and have all my iPOD FLV videos magically convert to MP4
8. You Tube Download Modality: I find a song I like and Download it to RealPlayer. Once downloaded, I PAINFULLY convert it to Ipod (can't do more than 9 songs at a time). Once in iTunes, I sync it to my iPOD classic and bam---my videos are in my my iPOD.
9. Currently, the only songs that play on my iPOD are those I've purchased from iTunes.
10. Whudda I Do? The Apple Tech guys haven't a clue. Also. If I can only do it manually (I've got movies mixed in as well), how do I set up an MP4 folder and then only transfer that folder on to my iPOD?!!!

The sync process for contact information, calendar events and bookmarks is bidirectional.
http://docs.info.apple.com/article.html?artnum=306071
The sync process for iTunes content and photos transferred from your computer to the iPhone is in one direction only and can be synced with iTunes on one computer only.
iTunes includes an option to transfer content purchased from the iTunes Store only from an iPod or iPhone - not for content acquired elsewhere that was transferred from iTunes to your iPhone.
You need to transfer your iTunes library from your Windows PC to your Mac.
http://docs.info.apple.com/article.html?artnum=304721
http://www.apple.com/support/switch101/

How to use Dashcode to make HTML Widgets in iBooks Author?

I'm writing books on iBooks Author, and I got a problem:
I wanna add some HTML Widgets to my books, and I was told I should use Dashcode to make them. So I downloaded the Xcode, but I don't know how to open the Dashcode on my Mac. I really hope someone could give me some lessons, I would be very grateful!

Start here: iBooks Author: About HTML widget creation

How i use catalyst to make phone app

can any one know how i use flash catalyst to make cell phone application like black berry ???

Are you thinking of targeting the BlackBerry Playbook? You can use Flash Catalyst to prototype up your application for mobile, but the skins that it creates are not optimized for mobile nor are they usable in the Flex Hero mobile components. So Flash Catalyst's output will not be very useful by Flash Builder.
I would not recommend using Flash Catalyst as part of a production workflow for mobile at this time. You can still use it for prototyping you concept, but you not have any touch/gesture support in any of the components, making the interactions with the prototype a bit limited. Flash Catalyst only targets the desktop version of the Flex framework, so although you can compile the FXP in Flash Builder for a mobile device, you will be running the full desktop version of the Flex Framework and not the mobile-optimized version.
Hope this answers your question,
Chris

How to use Buffering to make image better

Rigth now I have a DFS maze program, that basically is like a grid maze with three buttons. Randomize (which, duh, randomizes the maze), Solve, and Statistics. When I click on the statistics button, another "wing" opens up on the left showing a text area. But when the text area is being built, what is actually going on in the background processing, is that thousands of maze iterations are running, and then the statistics is printing out. Of course when these iterations are running the maze screen goes blank, and there is one long blink. I would like to make it so that the last maze image stays, until all the statistics in the background is done, and then just the statistics is shown, and not the final maze iteration. So basically the maze image on the right will just be the maze image right before the statistics started running.

Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to use Custom Tags for Theme and Base Map Definitions

In Mapviewer documentation I've found the following new feature:
The XML definition of a theme or base map now supports application-specific
attribute tags. You can use the Custom Tags option in the theme definition in Map
Builder to specify tags and their values, which can be interpreted by your application
but are ignored by MapViewer itself.
I'm able to define a custom tag in Mapbuilder, but how can I use it in my Application?
Thanks.

As he said, you have to use as Platform service to create adapter in OIM.
tcUserOperationsIntf service = Platform.getService(Thor.API.Operations.tcUserOperationsIntf.class);
HashMap<String,String> searchmap=new HashMap<String,String>();
searchmap.put("Users.User ID", userID);
tcResultSet searchset=service.findAllUsers(searchmap);

IDVD doesn't process AVCHD video and high definition RAW photo files

Hi everybody. I have a brand new Canon VIXIA HF S10 and 5D Mark II. I tried to make a movie out of video shot with the camcorder using iMovie and then I burned a DVD with iDVD. I also made a slide show out of RAW photos made by the 5D. And I encountered such a situation when the movies I made seem to be missing some frames. For instance people move discretely instead of smoothly as in the original video. As for the photos they come out not to be of high definition and don't fit to the whole TV screen. I mean if I burn the photos to a DVD in Jpeg they look perfect. I set all the setting to HD but still get poor quality.
Have anybody dealt with the same situation or I should try more professional soft like Cut pro or DVD pro?

IDVD can't process AVCHD. I use Toast to do that. Import your pictures or slides into IMovie and export them via Quicktime if you want 1920x1080 or via browser if you want 720P. Than you can us the browser in Toast to create a DVD in AVCHD. It will play in a blu ray player but NOT in Mac OSX. You will need to use Native Windows via Boot Camp and a Blu Ray player in your mac if you have one. Otherwise a Blu Ray player in you TV system should work.

I recorded my video in High Definition. WHY does it upload to Youtube in low quality?

I just bought Premiere 13 hoping it would WORK for me as none of the other versions I bought did. It worked great to edit my video. I then shared it with Youtube, but it uploaded in low definition (360). The video was recorded in High Definition as our my other videos already on Youtube.
What do I do to get my videos to upload to Youtube in High Definition as I recorded them????
Thanks, Frammajoy

Joy
Please explain further.
If you create a Premiere Elements 1920 x 1080 project and you upload it to YouTube with the High Definition for YouTube - 1920 x 1080 preset and, at YouTube,
you set the viewing of the YouTube player to HD, are you saying that the quality is poor? In addition, the YouTube player is a 16:9 player. Are your uploads presenting with black borders when viewed on YouTube when the upload is done using the Premiere Elements YouTube built in feature?
In other words, are you saying that are not being set back by YouTube player automatically setting the viewing for 480p or something lower than that rather than automatically setting for HD 1920 x 1080 viewing?
Your opening thread description seems to say otherwise.
I then shared it with Youtube, but it uploaded in low definition (360). The video was recorded in High Definition as our my other videos already on Youtube.
What do I do to get my videos to upload to Youtube in High Definition as I recorded them????
Again, if you create a 1920 x 1080 project, upload with High Definition for YouTube - 1920 x 1080 preset, then the rest is up to YouTube and its conversion
process.
If that is the case, that is a YouTube preference and not Premiere Elements. This is not Adobe here. Rather user to user. And, I am not affiliated with Adobe in any way. So, my only interest is you and helping you move forward in your Premiere Elements projects user to user based on the details that we exchange.
Please help me to understand why your reply was
It isn't Youtube that is the problem
Thank you.
ATR

How to use hdmi converter make notebook video become high-definition

Similar Messages

Maybe you are looking for