How to Use Home+End Key on new short usb apple keyboard on XP

How to Use Home+End Key on new short usb apple keyboard on XP
now i use macbook and new short apple keyboard.
it hasn't Home and End key. i try to use Fn + -> , Fn + <-
it cann't do that. How can i set the Fn + <- be Home key
and Fn + -> be End key like on my macbook keyboard
thank you for answer

Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
I hope that now you have an idea what I’ve done…
Good night
Björn
PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

Similar Messages

  • How to use my itunes with a new pc

    how to use my itunes with a new pc?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • How to use standard function keys as custom keys

    how to use standard function keys as custom keys.
    i have encountered that problem while developing a screen, there i'm supposed to use standard function key F2 ( which actually meant for choose) for clearing the screen fields where the cursor is present and f1 for saving data that entered in screen fields, etc...
    kindly help me out.

    Hi ,
    Solution to use SAP reserve function keys F1 .. F4 (mostly this requirement comes up for RF screens) can be acheived by assigning your new Function code using the Menu path Utilities --> F key Consistency in the Menu Painter (SE41) . Once you assign your cutom function code to the standard Fn keys the only remaining step is to make sure that you set a curson on any of the field on sceen by using the Key Word "SET CURSOR" .
    If you dont use the key word SET CURSOR in the PBO of the screen then you might not see any response for F4.
    Thanks

  • I am having trouble using Home sharing on my NEW Apple TV from my windows itunes

    i having a tough time using home sharing on my New Apple TV and my windows computer iTunes i have the latest update of iTunes. And it is on both my computer and Apple tv

    Nlangston wrote:
    i having a tough time using home sharing on my New Apple TV and my windows computer iTunes
    How are you having "a tough time"?
    What happens?
    What doesn't happen?
    -> http://support.apple.com/kb/TS2972

  • FCE & MBP Where's the home/end keys?

    Hi
    Got my new MBP and FCE installed. Going through COD's Training DVD, Tom mentions the "home" key. Come to think of it there isn't one on my MBP keyboard.
    I tried CMD + L arrow but that doesn't work. The up/down arrow keys will moce the scrub bar but only to the next clip, so to get it back to the beginning or end of the video, I have to keep hitting the L/R Arrow keys.
    Isn't there a keyboard command to equal the home/end keys?
    Thanks
    Allen

    It appears there may not be one. Take a look at this correspondence:-
    http://forums.macrumors.com/showthread.php?t=316976
    .......... and if you don't mind risking blowing up your computer there is this:-
    http://www.starryhope.com/tech/2006/mac-os-x-home-and-end-keys/
    Message was edited by: Ian R. Brown

  • Keyboard arrows, Home, End keys

    In a edit box, such as a search box, my keyboard arrows, Home, End keys do not work since I upgraded to FireFox 8

    ''my keyboard arrows, Home, End keys do not work...''
    That problem is caused by "caret cursor" and the way that Mozilla works with it. Press "F7" reply "No" to turn if off. F7 toggles the setting and you may or may not see the warning but if you do see "No" that would mean you have it on and "No" would turn it off. For a more complete resolution see
    * [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#caret Caret Browsing] in<br>http://dmcritchie.mvps.org/firefox/firefox-problems.htm#caret
    See how you do with Adobe PDF files after fixing the above. You can have PDF files open by default without Firefox involved except to download them, but I expect you chose to view in your browser. You have a lot more control of reading PDF files outside of Firefox. The plug-in is what allows you to open them in a browser.

  • Can't figure out how to use home sharing

    Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
    I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
    If anyone is able to help me out here, that would be great! Thanks!

    The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
    Thanks for the help.

  • How to use the "identify" feature in new 6.3.1 airport utility?

    how to use the "identify" feature in new 6.3.1 airport utility?
    so you can find the basestations in larger networks?

    There is a workaround, which is to use Airport Utility 5.6.
    I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
    Four caveats:
    1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
    2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
    3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
    4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
    So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
    PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
    I hope this is helpful information. Took me a while to find out how to do this.

  • In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?

    In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?

    Hit the '''F7''' key, you probably have Caret browsing turned on.
    http://kb.mozillazine.org/Accessibility.browsewithcaret

  • Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

    Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

    Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

  • How to use BAPI to add a new version for a claim number in WTY transaction.

    How to use BAPI to add a new version for a claim number in WTY transaction.
    I am using  function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
    It needs to copy all contents of previous version to a new version.
    While doing so i am unable to copy fields like valic valoc etc. Any ways by which  i can copy this values.
    WTY will update PNWTYH , PNWTYV and PVWTY tables.
    Thanking you,
    Lokesh.

    Hi Vishnu,
    You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
    Rewards point if you think this info is useful
    Regards,
    Dipender Singh

  • Need a quick step by step how to use home share to import 500 songs in my Libruary into my little girls libruary

    need a quick step by step how to use home share to import 500 songs in my Libruary into my little girls libruary; her birthday is today - my five min action item has had me up since 2am - help me not be a failure today

    Hi there,
    So, is your daughter's library on a separate computer and running on the same Wifi as yours? Just need to establish the scenario.
    Cheers,
    GB

  • How to use old nano ipod on new computer

    How to use old nano ipod with new computer

    Your iPod is designed to sync with only one iTunes library at a time.  It will recognize the iTunes library on the PC as a new library.  If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library.  So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Where are Home, End, Page Up, Page Down on MBP keyboard?

    I just bought a MBP-15 after spending my entire computer life with Windows.  I have a fairly sophisticated spreadsheet that I created in Excel that I now want to use in Numbers.  But I'm hung up on the simplest thing - Home & End.  I've read other postings and guides related to the keyboard, but everyone else seems to indicate that there are already Home & End keys (and Page Up/Page Down keys) on the keyboard.  I have none - at least none that I can find.  I just have the standard MBP keyboard, including the F1-F12 function keys (plus fn, option, control, command, & arrows).  All of the key remapping posts talk about their use in text like a Safari e-mail.  For spreadsheets, Windows lets me take a formula in 1 cell, ctrl-c to copy it, then shift-end-down and ctrl-v to paste that new formula to the end of the existing column.  How is this done in the Mac world?  Very frustrating so far.  If it matters, I'm using Numbers '09 with Lion.  Any and all help appreciated.

    Home: fn-left arrow
    End: fn-right arrow
    Page Up: fn-up arrow
    Page down: fn-down arrow
    Actions in Numbers may not match those in Excel.
    "For spreadsheets, Windows lets me take a formula in 1 cell, ctrl-c to copy it, then shift-end-down and ctrl-v to paste that new formula to the end of the existing column."
    (Enter and confirm the formula in the initial cell if it's not already there.)
    Select the initial cell.
    Scroll to the bottom row using the thumb on the vertical scroll bar.
    Shift-click on the bottom cell to select it and all cells between it and the initial cell.
    Go Insert > Fill> Fill Down.
    OR
    Select the initial cell (containing the formula)
    Copy (command-C)
    Scroll to the last cell as above.
    Shift-click on the last cell.
    Paste (command-V)
    Numbers design model favors documents containing several small single purpose tables, not large ones. The maximum size of an individual table is 255 columns by 65355 rows. In practical terms, then limits are much smaller in terms of deteriorating performance speed.
    Regards,
    Barry

  • I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs

    I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs then stops again!!! still annoying.
    Can anyone assist me with this issue?
    Thanks

    To downgrade, you'll need to download the previous software version here: ATV3 http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw
    ATV2: http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
    Next, plug the Apple TV into your computer with a micro-usb cable (most phones today use these) and start up Itunes. It should detect the Apple TV in recovery.
    After that, hold down Option on Apple or Alt on Windows and click Restore. This should open a window that allows you to select the software update you want to apply. Select the one you downloaded earlier.
    It will then go through the restore process, which takes only a few minutes, and then you will be able to plug the Apple TV back in to your display and set it up again.
    I recently ran into a similar issue with a bunch of these things and after restoring them all to the previous software version they are working again.

Maybe you are looking for