How to use iBook for sharing internet via airport card... can it be done?

The title says most of it all. I want to share the internet coming from the wall through the airport card in my iBook. I've made it work, however I'm concerned about doing it securely. Can it be done securely? If so, how? I've read in the help files about using the firewalls and such, but I'm having trouble making heads or tails out of it all. How about a primer on basic wifi security in the iBook's Airport card environment? I'm not as savvy as I used to be! Thanks in advance for your help.

ride a bike:
Requirements for wireless Internet access
To use AirPort to access the Internet wirelessly using Mac OS X, you need:
An Apple AirPort Card, AirPort Extreme Card, or a compatible third-party wireless card
An AirPort Base Station, Time Capsule, AirPort Express, or an AirPort-enabled computer acting as a software base station (if you are hosting an AirPort wireless network)
Internet access
Some Internet service providers (ISPs) are not currently compatible with AirPort.
If you’re setting up an AirPort Base Station, Time Capsule, or AirPort Express to connect to the Internet, you need an account with an ISP. When you set up your account with your ISP, you were most likely given account information (such as user or account name, password, phone number, and possibly other information). Have this information ready when you set up your device.
If you are connecting your base station to an Ethernet network that already has an Internet connection, you may need an account name and password to access the network. Check with the network administrator if you’re not sure.
(From the Help Menu)
Please post back with further questions or comments.
cornelius

Similar Messages

Can't connect to Internet via Airport but CAN via Ethernet

Yeah so I have tried TWO different of my AX's and can not connect to the internet via EITHER even though Network Status says "you are connected to the internet via Airport". But, if I hook the ethernet cable directly to the computer from the modem it connects to the internet fine. What am I missing. Oh yeah, and on one of the AX's the "music" tab does not appear next to the "WDS" tab thus not allowing AirTunes on that AX, any ideas on that too? PLEASE HELP!!

CONNECTED!! After resetting the modem, llike you suggested, I am able to get the wireless network back up and running, BUT...I am still having problems with one base station not showing the "music" tab and thus not letting me stream music to it. When I hit "configure" the tab shows for a quick second then disappears. Any idea?

Sharing Internet via Airport Extreme using a USB wireless modem

I have had to go to NextG access using a USB modem (only option). We previously succesfully had the second iMac sharing the internet connection on an ethernet-connected wireless service. Now, I cannot get the other iMac to share the connection, because there is no option to choose the USB modem.
Another problem is the USB modem is top-dog - it won't connect unless I turned off anything else using anything remotely looking like wireless (even when I have my bluetooth phone connected to another USB hub). I can connect to the NextG network after disconnecting everything else and THEN reconnect, but I just can't get the Internet sharing going. I have also had the iMac freezing, demanding a power-off-power-on (unheard of in my experience!).
Is there any remedy for the Internet sharing at all? Configuring a different channel or something on Airport? Using one of the other config options?
I think there are something like USB-to-Ethernet adaptors (pretty costly here in Australia) and don't want to shell out for one if it doesn't work. Same with a third-party router. I also wondered if I should just forget about using Airport completely and run a few metres of crossover cable?
Any help would be greatly appreciated, thanks.

Hi Steven, I know this question has been answered and is a couple of months old but I think you may be able to help with my set up? I have a Thomson speedtouch 510 v6 modem router provided by Karoo (UK). My other Belkin N modem router has just bust [again] so the Speedtouch is my old faithful backup device. Now, i've never been able to get on ichat with the Belkin as its a mimo n speed and this is apparently not compatible; So i'm now on ethernet with the st510 and have just set up ports for ichat thanks to a thread called http://discussions.apple.com/thread.jspa?messageID=2719419&#2719419.
What I want to know from you (because I really need a wireless router to get me off this ethernet support system and back on airport) is how you're getting on with the st510 / airport extreme combo now and can you use ichat on it? If so does your connection doctor say full cone in network settings or something else? As I say, I really want to use ichat and have never been able to in 3 years of owning my Macbook Pro. Hope to hear back from you Steven. Regards Steph

Ibook G-3 with old airport card can't see New Airport Extreme Base Station

I have been trying for a week now to get my G-3 ibook set up on my Airport Extreme Network. No matter what I do, I can't sign on to the network. When I put in the password I get an error message 3151. I have no idea what this means. I have read everything, restarted base, changed network password, trashed all airport and prefs on G-3 and reinstalled. Although my network shows up in the control strip, it doesn't show in the setup assistant. Please help if you can, I'm about to go crazy! Thanks.
Power Mac G5 and ibook G3 Clamshell Mac OS X (10.4.9) ibook is running 9.2.2
Power Mac G5 and ibook G3 Clamshell Mac OS X (10.4.9) ibook is running 9.2.2
Power Mac G5 and ibook G3 Clamshell Mac OS X (10.4.9) ibook is running 9.2.2

Dear Duane, I did have 802.11b configured, but I had the WPA instead of WEP enabled. When I reconfigured my network, the clamshell was instantly able to join and use the network. I have many many questions about how to use the network to allow both computers to communicate, but I'll read up on it and I'm sure the answers will be there. You saved me $240.00 for the 1st hour and $160.00 for anything over that Techserve was going to charge me to come and set it up. I can't thank you enough. Everyone tells me not to waste money, but to save for a new ibook with System X, but I love my old clamshell and I'm going to get it a bigger hard drive so it can be upgraded to run OS X. It's the old 4 Gb one. I can't thank you enough for your solution! Now I can work on the laptop in my bedroom! I love Mac stuff and I knew the Extreme base station would work, regardless of what all the posters have been saying.
Power Mac G5 and ibook G3 Clamshell Mac OS X (10.4.10) ibook is running 9.2.2

Sharing Internet via Airport with Firewall on doesn't work....correctly

My imac has an ethernet hi-speed cable connection and I want to share it over the airport so that I can connect to it with my macbook and iphone.
Everything works fine, until I turn on my firewall. Once the firewall is turned on and I try to connect with my macbook or iphone, neither can get an ip address.
If I keep my firewall turned off, it shares the internet connection wonderfully and both devices get their ip's.
Does anyone know how to open the firewall up so that it allows my macbook (and such) to get an ipaddress?

They should be able to get an IP address with the firewall on or off. However they will have difficulties with other services.
The best solution is to get an inexpensive wireless router.
Another (much more complicated) option is to use WaterRoof to configure the firewall so that the appropriate ports are open on the iMac's AirPort side.

TS2756 How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

How do i use ibooks for saving my lecture notes / power point slides please?

Hi, how do I use ibooks for savng / storing my lecture notes on please? (on either a iphone or ipad). Also, can I save powerpoint slides to it too? thanks.

iBooks can only read two formats -- .epub and pdf. So you have to convert your lecture notes or powerpoints to one of those. To do that, check the Save, Export, or Share functions of whatever app you are using to create your notes.

Can someone help me in easy steps on how to use the home sharing for music on itunes.

Hi can someone give me easy to follow instructions on how to use the home sharing for itunes.

iTunes- Setting up Home Sharing on your computer
Setting up Home Sharing for Apple TV (2nd generation)
Troubleshooting Home Sharing

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

How to use i for if condition in a for i in loop?

Hi friends,
I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
cursor is
select c1,c2,c3 from table1; -- 100 rows returned.
open cursor
loop
fetch c1,c2,c3 into v1,v2,v3;
for i in 1..3 loop
if 'v'||i between 90 and 100 then
v_grade := 'Excellent';
elsif 'v'||i between 80 and 89 then
elsif 'v'||i between 50 and 59 then
end if;
end loop;
close cursor;
This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
Thanks for any advice in advance!

user508774 wrote:
Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
So do not underestimate what can be done in SQL.
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
To create a SQL program with parameters is done by using bind variables. Instead of
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
The following SQL source code should be created:
v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
Where v1 and the others are PL/SQL variables.
That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

I have ipad3 and have internet from sim card, can i use my ipad as a wirelss router and how if it possible, i have IOS 8.0.2

I Have ipad with IOS8.0.2 with internet from sim card, can i use it as a wireless router and how if it possible?

Hi Mostafa sanad,
Welcome to the Apple Support Communities!
It sounds like you may want to use your iPad as a personal hotspot. Please read over the attached article for information on the process.
iOS: Understanding Personal Hotspot
Have a great day,
Joe

I have a USB adapter for my iPad, can I plug in a AT&T USB Connect Momentum and use it for my internet connection.

I have a USB adapter for my iPad, can I plug in a AT&T USB Connect Momentum and use it for my internet connection??

Probably not normally, Apple has removed some of the hidden features of the USB dongle via a software update for iPad. One of those features was playing host to hard drives, keyboards, etc.

How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

The cheap & easy way is to just drag the app to the Trash.
If you want to get all of the associated files use an app deleting app like the free AppCleaner;
http://www.freemacsoft.net/appcleaner/
Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28

I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

How to use parathesis for OR and AND OPERATOR...

oracle 10g
Hi
Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
select count(balance) from balanace_tb
where kk_code in(111,112,113)
or
kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
or
kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
or
kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
or
kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
and
open_date=20130331

I assume you're looking for something like this?
select count(balance) from balanace_tb
where (   kk_code in(111,112,113)
       or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
       or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
       or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
       or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
and open_date=20130331
If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
Re: 2. How do I ask a question on the forums?

How to use iBook for sharing internet via airport card... can it be done?

Similar Messages

Maybe you are looking for