How to use IBus by default?

Hello,
I'm using IBus to write japanese, I want to use IBus all the time, is it possible to replace the standard writing method by the IBus writing method?
Thanks.

Hiya キャンサー!
In the IBus option's advanced tab I set IBus to use the same input method for all applications.
Also I found an option in qtsettings (I'm using KDE) in the interface tab where you can change the default imput method to IBus but changing it didn't have any apparent effect though.
With the keyboard shortcut ctrl + space I get global IBus in all applications I've used so far.
What I didn't test and don't know if it makes any difference:
I added this to /etc/profile
export GTK_IM_MODULE=ibus
export XMODIFIERS=@im=ibus
export QT_IM_MODULE=ibus
Don't know if this is what you were looking for this is what I'm using.
Last edited by Faither (2011-07-29 17:43:25)

Similar Messages

How to use IBus for chinese

I am reading this article : https://wiki.archlinux.org/index.php/IBus
But it does not seem to explain how to actually use IBus. How can I start it and use it?
I already installed ibus and ibus-pinyin. I tried the command ibus-daemon, but it doesn't work.

Gradient, I know you haven't asked for this, but I just wanted to share my experience: I've used IBUS, SCIM etc., mostly changing from one to the next if there was some major hassle (especially after large updates). I've given up on IBUS quite some time ago and the input method I'm using right now is called Fcitx and I'm using it both for Japanese and Chinese input. So if you can't get IBUS to work I'd recommend to give Fcitx a try.

How to use create-default-dbms-tables in SQL Server 2000

Hi everyone,
I'm new in EJB development. I'm trying to deploy a CMP to Weblogic 8.1 SP1 using
JBuilderX. I configured a ConnectionPool and DataSource to allow the CMP to access
the SQL Server 2000. However, I cannot deploy the CMP if I didn't create the table
in SQL Server manually. Does anyone know how to use the create-default-dbms-tables?

Refer to
http://e-docs.bea.com/wls/docs81/ejb/DDreference-cmp-jar.html#1162249
"Keith" <[email protected]> wrote:
>
Hi everyone,
I'm new in EJB development. I'm trying to deploy a CMP to Weblogic 8.1
SP1 using
JBuilderX. I configured a ConnectionPool and DataSource to allow the
CMP to access
the SQL Server 2000. However, I cannot deploy the CMP if I didn't create
the table
in SQL Server manually. Does anyone know how to use the create-default-dbms-tables?

[Solve]Set ibus as default IM when use other english language in gnome

Hello everybody,
I am satisfied with Arch + Gnome3 + Ibus in English language. With English language, Ibus is already set to default system-input-methods as well as I expected.
However, today I change language from english to vietnamese, System-input-methods change to other method, not Ibus.
I looked for programs to change input method such as im-settings, im-chooser and im-switch, but it's not exist in arch package or aur.
I add "export GTK_IM_MODULE="ibus"" to file ~/.bashrc , I can use Ibus only in firefox, libreoffice. To use Ibus with other programs as gedit, gnome-terminal, I must manual change input method by right click and choose Ibus.
So, How can I set Ibus as default system IM?
By the way, I can use Ibus in all Qt applications without trouble after set in qtconfig.
Thanks for reading.
Last edited by s8dtvt (2011-06-25 01:56:18)

Well, I set: LOCALE="vi_VN.UTF-8" instead of LOCALE="en_US.UTF-8" by default in file "/etc/rc.conf" and it's solved.

Mail -- How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

sorry, but I can't find the mail preference in the latest Yosemite OS. Do you know where I can find it?
Thank you
Don

Hi i am using personal hot spot before updating 6.1.3.now iam using ios 6.1.3 version the personal hot spot is not working..can you please help me on this?how to use that,its in a default mode?

Hi previously i use personal hotspot,after updating my 6.1.3 ios in india iam not able to use that.It is in a default mode.
Can you please help me how to use personal hotspot.
Thanks,
Goutham.

Im really good at programming but really suck at algorithms
>If your are 'really good' at programming, you will be able to solve this problem. Because, it has nothing to do with algorithm.
>>can someone please please write in a algorithm form for me , i need it by friday i would greatly be thankful for u
>Wrong person, in the wrong place.

How to use copy default values for material from vendor master in Account Group

Dear all:
In define AccountGroup for vendor ,there is a field named DURAS which means default values,who can tell me how to use it?
Any informations are appreciated!

Hi Katherine,
I have tried using default value as B in the customizing
If i maintain default values in the vendor master record, it will automatically adopt in the purchase info record.
Here i tried using sales person & telephone no field in vendor master record & it automatically adopts to purchase info record.
Region sales person and telephone no i have maintained in vendor master record, it automatically fetches to info record for the particular account group. I am not sure if there is any relation between vendor master and material master record.
Regards
Subbu.

How to use the Default sharepoint credential (DefaultNetworkCredentials )in the C#.

How to use the Default sharepoint credential (DefaultNetworkCredentials )in the C#.
I am using the copy.asmx web service to upload and download the files from sharepoint Document library to .Net application,how to get the Default sharepoint credential from the .net application?

Hello,
YOu can use below line to pass default credential in code: (You can also pass domain,username, password as string if you want)
clientService.Credentials = System.Net.CredentialCache.DefaultCredentials;
http://ktskumar.wordpress.com/2009/03/03/upload-document-from-local-machine-to-sharepoint-library/
http://sharepoint.infoyen.com/2012/02/23/upload-file-in-document-library-with-metadata-inculding-lookup-field-using-sharepoint-web-service/
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Micro

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.

See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types]

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

When & how to use default settings option in job scheduling with BO 4.1

Hi,
With BO 4.1 we got new features and one of them is "Default Settings" option in the job scheduling. While scheduling a report in CMC we are getting below attached screen. I want to know when and how to use this option? while scheduling job on queries.
Please guide me to, thanks in advance.
Regards,
Mithun Pati.

Hi Mithun,
Below thread may give you clear idea.
The Purpose of the default settings is to have customized default settings for the enterprise. These settings would apply to any user who has access to Info view and wants to schedule a report. For example you can setup default values for "From" section of email so any scheduled reports use those settings. Similarly another setting we have defaulted is the number of retires involved and the seconds for each retry. Business Objects will not send out a failure emails unless the last retry has failed. The default settings should only be modified by an admin.
Purpose of Default Settings when scheduling a WebI report?

[svn:osmf:] 13113: Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.

Revision: 13113
Revision: 13113
Author:   [email protected]
Date:     2009-12-21 01:08:10 -0800 (Mon, 21 Dec 2009)
Log Message:
Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/ScrubBar.as
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/URLInput.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/Fonts.as
Removed Paths:
    osmf/trunk/libs/ChromeLibrary/assets/images/stop_up.png_1

Your site was built using tables, whose sizes are defined in your site.
If we look at your first table definition, we can see:
<table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
everything else in your website.
And that is why everyone is saying, "Start Over!"
I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
properly if I'm adding text and pictures that need to line up with each other.
You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
money well-spent.
I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
think you may have chosen that route.

I'm using bridge cc2014 on my mac and when I go to open photos, it opens on PS6 even though I have PS CC. How do I change the default?

I'm using bridge cc2014 on my mac and when I go to open photos, it opens on PS6 even though I have PS CC. How do I change the default?

Change File Associations in Mac OS X

How to use X-Fi Effects without selecting SB as the default sound device?

How to use X-Fi Effects without selecting SB as the default sound device?Hello everyone,
That's my situation.
I have Sound Blaster X-Fi Go sound card and I am using SRS HD Audio Lab. SRS HD Audio Lab was selected as the default audio device and X-Fi effects (X-Fi CMSS-3d, Equalizer etc.) was working without any problem in Windows Xp. I have Windows 7 now and when i select SRS HD Audio Lab as the default device, Creative effects are not working, i must select "SB X-Fi Go!" to get them working but i can't use SRS HD Audio Lab in that case. SRS is also using SB X-Fi Go sound card as the output and volume adjustment on console launcher is working but something is disabling the effects. Any solutions to enable effects ?
Thanks.

If the kernel modules for your sound card and webcam both support the index parameter (use modinfo to find out) then adding
options <name_of_preferred_card's_kernel_module> index=0
options <name_of_second_card's_kernel_module> index=1
to /etc/modprobe.d/modprobe.conf (or another modprobe conf file of your choice) should solve the problem.

How to use custom calendar for scheduling other than owb's default calendar

Hi All,
Can anyone please tell me, is there any possibility of using a custom calendar in place of owb default calendar calendar during scheduling. Because, in my case, the month start date and end date are not 1st and 31st that changes according to the financial calendar that is defined.
I want to schedule mappings on month end date of financial calendar. How can this be done?
Thanks in advance
Joshna

Hi,
The only possibility is to configure more than one schedule using the complex by month, by_ configuration. I don't know if this will work for you. Or you must use another job control system.
Can u just brief how to use it. Any other possible way of achieving my task?
Thanks
Joshna

How to use IBus by default?

Similar Messages

Maybe you are looking for