How to use in italy an airport extreme base bought in the states?

I have received as a gift an Airport Extreme base bought in the States and it doesn't work well. In few words it happens that the connection with the modem is discontinue. Maybe it's because it was built to be used in an "american" environment. Is there someone that can help me to understand if an US base cannot be used in Europe or what can I do to set up correctly the base? Thx a lot. Massimo
Product: Airport Extreme
Version: 7.7.3
Modem: ADB Broadband DA2200

You will simply plug the Extreme into the main router by ethernet.
Setup the Extreme to bridge mode.
Whatever the airport utility chooses which can be wrong.. simply press edit when it is finished.
Change the Network setup to bridge.
And for wireless I recommend you select a manual channel for 5ghz.. because the US model is set to North America and does not have any settings for Europe. You need to set the AE to something that overlaps.
See the WLAN wiki and the chart for 5ghz.
http://en.wikipedia.org/wiki/List_of_WLAN_channels
2.4ghz won't be a problem.. US is a subset of Europe.. but 5ghz are markedly different.
Apple provide no way to change regions.

Similar Messages

Can I use an Airport Extreme Base Station from the USA in Europe ?

A friend of mine gave me an Airport Extreme Base Station from the USA to Germany. When I hook it up to my PB by ethernet cable the Computer can't find the Base Station at all. If I use my Sonnett Aria Extreme PCI card it finds the station but in the pop-up menu asking in which country I want to use the airport station it only offers North and South American countries. How do I go from here and why is my PB not finding the station when I'm using cables ? Has it something to do with different models for different countries ? Any idea ? Thanx

Here you go ...
Changing the Radio Channel on the AEBSn
Either connect to the AEBSn's wireless network, or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Setup, check these settings:
AirPort - Wireless
o Channel: <Use Automatic or select a preferred channel>

Can I use two airport extreme base station on the same network

Can I use two airport extreme base station on the same network

Here is my network setup:
D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
attached via ethernet to
5th generation AirPort Extreme Base Station - Main (Bought last week)
attached via ethernet to
4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
The main AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
TCP/IP Tab -> Configure IPv4: Using DHCP
DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
The remote AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1 (Everything else under this tab is blank)
Hope this helps with info needed.

HT4259 How do I set up an Airport Extreme Base Station (v. 7.6.1) to allow wireless network extension?

I have an Airport Extreme Base station (purchased in 2009) and an Airport Express base station (purchased in 2011 - the model that plugs directly into the electrical outlet) (both version 7.6.1 according to the Airport Utility info). I want to use the Airport Express to extend my wireless network. Using Airport utility setup I have a software option on the Airport Express to set it up to extend the network but I do not have an option on the Airport Extreme wireless setup screen that I can check to allow my wireless network to be extended.
All of the documentation I can find on Apple Support states that I should have an option I can check to allow the wireless network to be extended while in the wireles setup section for the Airport Extreme in Airport Utility; but, that check option isn't there. Is this a case of my Airport Extreme base station being too old to offer that option? Incidentally, when I try to select the extend wireless network option on the Airport Express from the Airport Utility wireless setup menu I get an error message (no details - just an error message). The same Airport Express sets up fine if I select join a network (not what I want to do). Am I just dealing with outdated equipment or does anyone have a suggestion? Thanks.

Close AirPort Utility if it is open.
Temporarily, move the Express to the same general area as your AirPort Extreme and power it up and wait a minute.
Hold in the reset button on the Express for 9-10 seconds and then release. Give the Express a full minute to restart to a slow, blinking amber light.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear
Click on AirPort Express just below that and AirPort Utility will automatically open
Wait a minute while AirPort Utility analyzes the network and announces that the Express will be configured to "Extend" the AirPort Extreme network.
Enter a device name for the AirPort Express and click Next
Wait another minute to allow the configuration to occur.
When you see the Setup Complete message, click Done.
Now move the Express to a location that is approximately half the distance from the AirPort Extreme and the general area that needs more wireless coverage
Power up the Express and you are all set. Trash those old instructions.

How to install utility or manage Airport extreme base from Win server 2003

I hope that everybody is doing well.
I am currently studying Server Administration and Maintenance. I am running Win server 2003 and soon to use Win server 2008, provided by the school several months ago. I am trying to install the utility for my airport extreme base in the server that I have at home to no avail. I will appreciated if somebody can help me. My options are limited I cannot buy another wireless router and I really need to do this for my studies. My server does connect to the base by the Ethernet but not I cannot manage the router in the server a major problem in the class that starts today. I will really appreciate if somebody can help to solve this issue which may be the other viable option because I cannot buy another computer I truly hope there is another option that does not include having to purchase another router I love my airport extreme base ;-D

In finder, go to - Mac HD, Library, Preferences - drag the folder 'SystemConfiguration' into the trash
Restart.
Evidently, there were some corrupt files in there which, in my case, made my AP utility sporadically lose both my airport devices. Trashing that folder and the files within, and restarting automatically creates a new fresh system configurations folder. The AP Utility immediately found my hardware with this fix, but only time will tell if this was root cause and be a long-term fix.
Best of luck.

How to add NAS to existing Airport Extreme Base Station Network...

Hi! I have a Airport Express network (DSL provided via a DSL modem) that is connected to the PC via ethernet, iMac 333 via Wireless adapter, and Powerbook via wireless card. I am bursting at the seams with components!!
I have the printer set up via the AE.
I would like to add a NAS to the works. (Just to see if it can frustrate me even more! )
How exactly would I hook this up? Any suggestions? Has anyone done this? Have a favorite NAS device you can recommend? We are looking to install this for a centralized place to store all our music, photos, movies, etc. We have TONS of digital media to store and it is clogging up our respective hard drives!
Thanks in advance for the help!!
Minder
Ti Powerbook 15 inch Mac OS X (10.4.6) iMac Grape 333MHz, Custom built PC and a Flower Power iMac soon coming home with me too...
Ti Powerbook 15 inch Mac OS X (10.4.6) iMac Grape 333MHz also

It is unclear... Do you have an AirPort Extreme base station (AEBS) or AirPort Express (AX)?
If you have an AEBS then you should have this configuration:
DSL modem<->[WAN] AEBS [LAN]<->PC
If that is your current setup, you would need to modify it by adding an Ethernet switch (or hub) so that it looks like this:
DSL modem<->[WAN] AEBS [LAN]<->switch<-+->PC
.......................................|->NAS

Why does my AirPort Extreme Base Station lose the internet when I unplug my printer Ethernet cable?

I just changed ISPs to Qwest from Speakeasy. New modem. Now my etherneted (from extreme base station) printer (Brother HL1870N) doesn't work.
And if I unplug the printer ethernet cable from the base station, the base station loses the internet connection.
Any help would be appreciated.
thanks

whats the version on your airport extreme and what renerations is it?

How do I set up an Airport Extreme Base Station ("Snow") for use as fax (on

I'm on a PowerMac G4 Digital Audio version without a built-in modem. I already have a Linksys wireless network set up between my Mac and PC laptop. So... I don't want to use the wireless networking on the Airport...
I just want to configure the Airport Base Station to use the built in 56K modem so that I can fax directly off the Mac. I did that on my old computer that had a built in modem, but I need to know how to configure this G4 and Base Station modem to perform this task.
Please help me connect the right wires (does the G4 connect to the base station with USB?). Then the power cord, and an RJ11 line from the phone to the airport base...
And what software (the used airport I bought doesn't have a software disc).
Thanks for any help!

Saxparilla, Welcome to the discussion area!
Sorry but the modem inside the AirPort base station (ABS) has NO ability to FAX at all.

I have installed wireless printer via the time machine/airport extreme base. Added the printer via the bonjour. There are times when the printer will display a black plug and won't print. I have to uninstall and then reinstall the printer.

What does the black plug display mean?

Get an Airport Express. Plug the printer into the AE with a usb cable and set up the AE to be part of the network (get an IP address from your router). You can get an older AE inexpensively on eBay.

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

How do I configure an Airport Extreme base station to receive and distribute a wi-fi network from a broadband wireless router?

I have recenly upgraded my broadband service and now have a wireless router. My old network configuration was a router connected by ethernet cable to an Airport Extreme base station which then broadcast my wireless network (I also had an Airport Express base staion set up as a wi-fi booster elswhere in the house).
I now have two networks (my original network and the new network from the wireless router) and wish to amalgamate these into one.
Ideally I wish to use the Airport Extreme base station as the "remote" booster (I have purchased Powerline adapters for this purpose) but don't know how to configure the Airport Extreme base station in order to to this.
Can you advise on the best set up for this please?
My Mac is running OS X 10.8.2 and the Aiport untility is version 6.1.
Thanks in anticipation.

The AirPort Extreme should be configured to "create a wireless network" with the same WiFi network name, security type (usually WPA2 Personal) and password as your existing router. It should be configured as connection type Ethernet and be in bridge mode.

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

How to add Ethernet ports to an Airport Extreme Base Station?

I have successfully connected an HP Office Jet 6310 to the Airport Extreme Base Station, after downloading the latest software from HP. It is printing wirelessly, and it is great so far.
The only problem is that the cable modem connected to ADSL has only one Ethernet port, and the Airport Extreme Base Station also has one Ethernet port. However, I need one more port to connect a phone (Vonage Telephone Adapter = VTA).
What is the easiest way to achieve this? I saw several other messages discussing hubs and routers, but the answer is not clear yet. If I purchase an additional router, should it be connected between the cable modem and the Airport Extreme Base Station, or the other way round?
Any help or advice would be appreciated!
Thank you in advance for your time.
MacBook Pro with 1.83 GHz Intel Core Duo Mac OS X (10.4.7)

One final vital piece of information, which should be my conclusion on this topic.
Following the advice received, I purchased a Switch from Linksys. Since the device didn't work for my purpose (dividing the Ethernet connexion into an Ethernet line for the HP printer and the Vonage phone), I called the Linksys support.
I was told that what I needed was not a switch, but a router. I thus had to get reimbursed for the switch and hunt for the proper router.
Finally, today, I have been able to find the item corresponding to my needs:
A Belkin Wireless G Router F5D7230-4
It costs less than 50 US$ and has all the necessary Ethernet ports. The setup is very simple, and I got it operational within a couple of minutes, despite some small problems getting the setup Wizard to work. It is Mac OS X compatible.
Thus, at the end, I have got the HP 6310 Office printer and the Vonage VTA phone working together, with a robust Wireless network including WPA security. I would recommend this type of setting.
The only trouble is that the AirMac Extreme Base Station has become completely useless! I will perhaps keep it as a souvenir, or as a decoration in the living room... This wouldn't have happened if the creators of this nice object, which is extremely expensive for what it provides, would have thought of including at least two Ethernet ports!
The unexpected reply to my query could thus be ironically formulated by saying: "replace the Airport Extreme Base Station with a cheaper an more efficient device." Sorry for that!
With my best regards to those who took the trouble to read this thread to the end.
Yours, Hotaru

Error on Airport Express when using to extend Airport Extreme Base Station

I have had continual problems trying to get my Airport Express (n) to extend my Airport Extreme Base Station. The signal it is receiving is "good". The settings are correct (as far as I can tell) and it was working for a brief period of a month or so.
Now it is not working and I have a red 1 in a circle (like an update is needed... but it will not take me to an update) on the Sirport Express in my Airport Utility.
Under "Status", it says "Extended Network" with a green crcle, but the main circle on by the name is flashing green, and will not send a signal.
Also in "Status", it says this: "This AirPort base station was unable to extend the wireless network. Make sure the wireless network you're trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network."
I have done all of those and yet..... STILL not working. Ugh.
Any thoughts? Procedures?
Thanks in advance.

At this point, I would suggest that you perform a "factory default" reset on the AirPort Express. In its default mode, the Express will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN.
Your Mac should recognize that there is a "new" AirPort Express present. You will find this on the dropdown menu from the AirPort icon on the OS X menu bar. Select the Express from the dropdown menu and the AirPort Utility should automatically start up to allow you to configure it.

Define static IP for both LAN and W-LAN devices with an Airport Extreme Base Station

Hey guys,
I have a lot of different devices connected to my Airport Extreme Base Station (5th Gen) either wirelessly or via ethernet cable. Since I control some of them via VNC and currently have to find the corresponding IP-addresses through trial-and-error, I'd like to define static IP-addresses for the computers in question. My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor. Two of the devices I want to remote-access are wired to a D-Link DES-1005D switch, which in turn is connected to the 1st ethernet port of the Airport Base Station. The remaining 3 remote clients are connected over 802.11n. All computers run Windows.
My problem now is that even though I was able to define static IP-addresses employing the "DHCP only" router mode, this didn't seem to work for the two computers connected via ethernet. Not only did I lose any internet connectivity with those, I even lost the ability to remote-connect to them using the VNC-viewer.
The question now is: how do I specify static IP-addresses for my ethernet devices correctly?
I hope you can help me.

My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor.
If you read the information in the other post, my answer would be the same here.
The Router Mode of DHCP Only is rarely used, and would only really be appropriate if your ISP was providing you with a fixed bank of multiple fixed or static IP addresses to use. This does not appear to be the case in your post.
If this were the case, the first IP address would be used as a Static IP address for your connection, and other devices on your network would receive the other fixed IP addresses.
99%+ of the time, you would use the Router Mode setting of DHCP and NAT on a network when you want the AirPort to perform as the main router for the network.
But......your post also indicates that you have another router upstream on your network from the AirPort Extreme. You would not want to run two routers in series on a network. That explains the problems that you are having.
The AirPort Extreme needs to be configured in Bridge Mode. It cannot be the "main" router on your network when you already have another router on the network. That is a fundamental networking rule.

How to use in italy an airport extreme base bought in the states?

Similar Messages

Maybe you are looking for