How to use Integrated 10/100 Base-T networking interface

I am new to Solaris, in fact I just installed it. I assumed that I would be able to connect to the internet immediately, but that isn't the case. I have an HP a1610n media center pc, and it comes with an Integrated 10/100 Base-T networking interface. Do I need to install a driver to use this network interface?

Can Solaris 'see' your device? this tool wil let you know. [Sun Device Detection Tool 2.1      |http://www.sun.com/bigadmin/hcl/hcts/device_detect.jsp]
If it doesn't see the controller, there are links on the device detection tool page that should help you find a driver - if one's available - for your NIC.
john

Similar Messages

  • Wireless capability Compaq Presario SR1950NX with Integrated 10/100 Base-T networking interface

    Wireless capability available for 6-year old Compaq Presario SR1950NX desktop with "Integrated 10/100 Base-T networking interface" ?  How best to do this. Wireless adapter via USB 2.0 ?  Have Time Warner's modem and my Linksys N750  router in another room, and want to use wireless printer in a third room.  Router currently serves Smart TV and a Lap Top in different rooms.

    Hi:
    Yes, the easiest thing to do is to purchase an external usb wireless adapter.
    I just got this one for my desktop.
    http://www.linksys.com/en-eu/products/adapters/AE3000
    You can read some customer reviews on the adapter at the link below.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16833124477
    I am very happy with mine. It connects to my Linksys E4200 router at 450 MBPS on my N only 5.0 GHz band.
    I believe that is the maximum throughput for the AE 3000 wireless adapter.
    I also like that it comes with the 3' usb extension cable and cradle to position the device for the best reception.

  • Driver for my Integrated 10/100 BASE-T Ethernet LAN

     need drivers for integrated 10/100base-t ethernet lan driver win8 x 64bit i have the
    HP 15-d103tx Notebook PC
      here  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04206739&tmp_task=prodinfoCategory&cc=us&dlc=en...
     please help

    The Integrated 10/100 BASE-T Ethernet LAN is not the wireless network adapter.
    That is the wireless network adapter and has nothing to do with the wireless.
    If you need a driver for the wireless network adapter, then please do this...
    Go to the device manager and click on the Network Controller needing drivers.
    Then click on the Details tab at the top of the network controller window.
    Now you see a Property drop down list and it is defaulted to Device Description.
    Drop down on that and select the second item on the list (Hardware ID's).
    Post the top string of characters that begin with PCI\VEN.

  • How to use integration event

    Hi
    i am facing issue when using integration event to get the modified value of account type in accounts. i have made a workflow on accounts at event of "when modified record save" which is using queue of "Default Queue". I have a also made custom .Net application which is using wsdl of "integration event" . But i can't read the modified value of account type through integration event when an account modified . Can any one guide me in this regards ?

    Hi,
    I have a WSDL file and i woudl know how to process for updating an account.
    I am pragramming in php. I have donne a function to connect to my Oracme crm domaine url.
    Thanks for your help
    lansar

  • How to use Labview 7.0 to make program interface?

    Hellow!
    Will Labview 7.0 be able to make the program interface? just like some application software made by VC++,VB?
    The program interface should have the menu,button,...
    Thanks!

    You can use LV to create a fully working program with an interface of your design, just like you would in any other compiler. LV actually serves as a compiler for a graphical language called G, which is based on dataflow instead of text based execution (the data "flows" through wires from one function to the next, controlling execution order and filling the role of variables).
    Since LV is multiplatform (and not MS), its default controls are not identical to those in VC and VB, but those can be accessed to. Actually, in many ways, it's much easier to build an interface in LV, because building the interface actually defines your "variables" and your interaction with the code.
    An interface would be no good without a program, so you will have to know how to use LV. It's much faster to learn than other languages, but you will still need some experience to write good programs.
    To learn more, I suggest you start by reading the LabVIEW user manual. Also, try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide.
    If your question was only about MS buttons, like in VB and VC, you can find them in the Dialog Controls palette, or you can use ActiveX to embed them into your program.
    Try to take over the world!

  • How to use AirPort Express over a dorm network

    Hi,
    I used my AirPort Express at home to add wireless to my existing home network and it worked well.
    However, I can't get it to work here so I'll give you every detail possible in order for you to explain me how to configure it. A million thanks in advance. (I'm giving you the specific address just to illustrate it better)
    I can only use one IP address on the network which is 192.168.1.25
    The subnet mask is 255.255.255.0
    The default getaway is 192.168.1.1
    The preferred DNS is: 195.235.113.3
    The alternate DNS is: 80.58.32.97
    Do I have to put the AirPort Express IP address as 192.168.1.25? And can I use any range of DHCP IP addresses or I must use 192.168.1.x?
    Thanks for helping me guys

    You need to use NAT in order to share the single IP address.
    If you had two (one for the AX and one for your computer) then you wouldn't need to use NAT.
    On the Internet Tab use the following.
    Connect using Ethernet
    Configure Manually
    IP address 192.168.1.25
    Subnet mask is 255.255.255.0
    Router Address 192.168.1.1
    DNS 195.235.113.3
    80.58.32.97
    On the Network Tab
    Check Distribute IP addresses
    Share a single IP address using DHCP and NAT
    I would use 10.0.1.x addressing
    On the Airport Tab
    Change Wireless Security
    Use WPA
    Use a password like this
    45fs6ue6v1d5fg7d55dsg555
    You may need to add the DNS addresses to the clients in order to access the internet.
    This may not work, and I would in fact advise talking to your campus network people instead.
    iFelix

  • Use VPN connection as a listen network interface in Web Application proxy

    I have a test environment: domain in hyper-v with Sharepoint and Office Web Apps servers (all under Windows 2012 - Windows 2012 R2).
    Because my home ISP does not permit some inbound ports (80,443) in a gate machine (under Windows 2012 R2) I create a vpn connection (by "setup a new connection or network") to my outside vpn server. On this vpn server the ports forwarding is configured
    and work fine (f.e. default IIS site is visible).
    I try to public my Sharepoint 2013 Foundation in Internet over this vpn connection and faced with the problem - WAPx (Web application proxy) does not bind to this vpn connection, only to traditional network interfaces.
    The question is how to make listening WAPx the VPN interface?

    Hi,
    Thank you for posting in Windows Server Forum.
    Please check beneath thread and article might helpful in your case.
    Configure a reverse proxy device for SharePoint Server 2013 hybrid
    http://technet.microsoft.com/en-us/library/dn607304(v=office.15).aspx
    Forcing VPN users through a proxy
    http://social.technet.microsoft.com/Forums/en-US/5a6a502d-4583-4c51-8486-3af982ba92da/forcing-vpn-users-through-a-proxy?forum=winserverNIS
    What’s New in 2012 R2: People-centric IT in Action - End-to-end Scenarios Across Products
    http://blogs.technet.com/b/in_the_cloud/archive/2013/07/17/people-centric-it-in-action-end-to-end-scenarios-across-products.aspx
    Hope it helps!
    Thanks,
    Dharmesh

  • How to use reflection to get base classes protected field

    I have one base Base classes which have protected fields and public get method to get the field.
    class Base
    protected int proField;
    public int getProField(){return proField;}
    Class Derive extends base class Base
    class Derive extends Base implements OtherInterface
    public void funtion(){};
    Now I have an instance of Derive, how can I use reflection to get the protected field inherited from Base. It seems Java Reflection only give runtime accessibility to public field and decleared field, protected-inherited field is excluded.
    Thanks
    Lei

    as the last poster said, traverse up the class hierarchy.
    ex:
    private void doSumfinToField(String fieldName throws IllegalArgumentException, IllegalAccessException, NoSuchFieldException {
    Class clazz = getClass();
    Field field = findFieldInClass(clazz, fieldName);
    //field.doSumfin;
    private Field findFieldInClass(Class clazz, String fieldName) throws NoSuchFieldException {
    try { // to find the field in this class    
    return clazz.getDeclaredField(fieldName);
    } catch (NoSuchFieldException e) {
    // if we don't have a superclass, continue
    if (clazz.getSuperclass().equals(Object.class)) {
    throw e;
    // check in the superclass
    return findFieldInClass(clazz.getSuperclass(), fieldName);
    }

  • How to use processor on 100%?

    windows 7 home premium 64-bit
    pavilion dv7 - 6b55dx (with intel hd3000 graphics)
    Problem: When i run assassins creed 2 on med settings it gives about 20 fps, but the processor is loaded just on 30%! it was plugged in, high perfomance power plan, hd3000 set to work with maximum perfomance. What can i do to make this **bleep** use it's processor on 100%? Because the processor is the only thing that is good it this laptop...
    This question was solved.
    View Solution.

    Alex,
    You didn't say how much RAM you have in that box.  16GB?  OK...  4GB?  You are on hind end... You are probably paging out.  Going nowhere slow.  Buy a new box, upgrade,  or get a new hobby.
    If the cpu is FAST and you have a bunch of RAM and the disks are FAST, you aren't going to tax the cpu.  OK, it's not that simple, that with what you can get to in Windows, that's about it.
    You can look up some of this stuff on the 'net.  Once you crack the lid you are into another realm - interesting, but it can shorten the life of your equipment and cost a bunch of money.
    Measure the output.  What do you see on the screen?  Are you dead when your competition is alive?  Or are you kicking A.. when they are screaming in the dirt?  There is your output.
    As to the graphics,  Yeah,  I hate boring.  If you buy a big enough box and put enough resource in it, you can run the graphics... if you are winning your matches, run the pretty colors... otherwise, go all Black Knight on your competition and be dark and deadly.  Smiling.
    Good Hunting.
    Kind Regards,
    Dragon-Fur

  • How to use integrated camera? T61

    I have an integrated camera, and I tried following the instructions lenovo suggests (opening the scanner/camera folder in the control panel) but no camera comes up! Also, I can't make movies either. I have windows vista so everything is different from the instructions lenovo gave me. Help!

    To first test the camera, you can use something like Windows Live Messenger.  If you enter the tools menu, you can use the "adjust webcam settings" option to test the camera.  The green light next to the lens comes on to tell you its active and it shows you the picture being captured.
    After that, you just open the app you want to use and its the application's responsibility to use the camera feed.  Windows doesn't provide movie capture software by default if I recall correctly. 

  • How to use output of one procedure in an interface

    THere is a scenario that i want to create in ODI
    I am getting data in chunks from a database. right now its only one attribute 'first_name' and a chunk of 20 comes in a database type varchar2(100) array.
    What I want is:
    As soon as first chunk comes in, I send this array of 20 names to an inteface. This interface would make some transofrmation on the data and will write the transformed data into the file. It sends back the signal to the procedure and procedure sends another 20 chunks to this interface again.
    How can I do that. I am stuck in it and i need to deliver the solution in 1 day. Any help would be much appreciated
    Thanks,
    Fawad

    You can solve this in different way:
    1. Create stage table and reference this in interface to create the file.
    2. You can create the package and call the procedure and interface in loop and also you can schedule using scheduler to run in intervals.

  • How to use TC as backup in fiber network?

    I've just got a new fiber network installed at home and I'll use the wireless functionality. And to that I would like to connect my TC. I do not want the TC as a base station only for backup and as a hub for my printer. How do I do?

    Just bridge the TC and plug it into your main router.
    You can also turn off the wireless although there is nothing wrong with using the wireless as it is probably faster for backups to connect directly to the TC.

  • How to use VISA to control a RS-485 interface.

    Hi All,
    I am devloping an app that needs to talk to a custom made device using full-duplex rs-485. There are two types of operations I have to accomplish.
    1) Down load micro-code and stuff like that when ever a user pushes a button.
    2) Deterministically transmit a small command packet that sets some control parameters.
    I will never have to do both operations at the same time.
    I would like to do task 1) in a windows environment.
    I have to do task 2) using LV-Real Time.
    The windows machine will be in full control of the RT system, so I will be able to dictate that the two operations never happen at the same time.
    So...
    A) Is this hardware config "legal"?
    B) Is ther any thing special I have to do
    (like got into tri-state mode)?
    C) Does any one have examples or hints that would help me get through this project with a minimum of blood loss?
    Thanks for reading this,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

    Ben,
    See these documents:
    KnowledgeBase 17M6L0TI: What Are the Different Transceiver Modes on the NI RS-485 Serial Cards?
    KnowledgeBase 2EMAARXY: How Can I Configure My Serial Board for 2- or 4-Wire Mode in LabVIEW RT?
    Regards,
    Chad H.
    Applications Engineering
    National Instruments
    http://www.ni.com/ask

  • How to use Native SQL statement in JDBC receiver interface

    Dear All,
    Can any one please help us in using Native SQL statement in a JDBC receiver channel. The reason why I need to use Native SQL statement instead of standard XML structure is that I need to execute a dynamic SQL query in third party database system lke:-
    Select Field1 Field2 from TABLE Where Field3 like "%Name'
    I expect the the response in the form of XML file which I can pick up using synchornous interface as mentioned on help.sap.com:-
    http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    The value for %Name can change dynamically according to the transaction and hence cannot be inluded as a KEY element in standard XLM structure,
    Hence I need to know:-
    1. What message mapping I should use in case if I have to use Native SQL statement.
    2.What operation mapping I should use in case if I have to use Native SQL statement.
    If guess correclty I may have to use Java mapping to do the above activities. Hence I want to know
    3 .How do to go about it to do the Java mapping.
    Thanks
    Ameet

    >
    Ameet Deshpande wrote:
    > Dear All,
    >
    > Can any one please help us in using Native SQL statement in a JDBC receiver channel. The reason why I need to use Native SQL statement instead of standard XML structure is that I need to execute a dynamic SQL query in third party database system lke:-
    >
    > "
    > Select Field1 Field2 from TABLE Where Field3 like "%Name'
    > "
    > I expect the the response in the form of XML file which I can pick up using synchornous interface as mentioned on help.sap.com:-
    >
    > http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    > http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    >
    > The value for %Name can change dynamically according to the transaction and hence cannot be inluded as a KEY element in standard XLM structure,
    >
    > Hence I need to know:-
    >
    > 1. What message mapping I should use in case if I have to use Native SQL statement.
    > 2.What operation mapping I should use in case if I have to use Native SQL statement.
    > If guess correclty I may have to use Java mapping to do the above activities. Hence I want to know
    > 3 .How do to go about it to do the Java mapping.
    >
    > Thanks
    > Ameet
    You can use a stored procedure, and call it from jdbc receiver adapter.
    I also solve this issue, with a DBLookup in message mapping. You can refer to my blog, and this usefull 3d:
    http://simonlesflex.wordpress.com/2010/12/07/pi-oracle-dblookup/
    /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler

  • How to use 10.9.8.y/24 network?

    I just bought an Airport Extreme Base Station, new model and upgraded to the latest software and firmware. I've had a home network for many years, through many routers, and have always used the 10.9.8.x/24 network. The new Airport is set up and working but unfortunately it doesn't want to let me tell it to live in the above network and hand out DHCP addresses in same. In the Airport Utility Internet/DHCP tab it allows me to choose between 192.168.x.y, 172.16.x.y, and 10.0.x.y. But I need 10.9.x.y. This is perfectly legal - according to one of many Google hits I just looked at:
    Q. What are private IP addresses?
    A. The Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of the IP address space for private internets (local networks):
    10.0.0.0 - 10.255.255.255
    172.16.0.0 - 172.31.255.255
    192.168.0.0 - 192.168.255.255
    So why won't it let me at 10.9.x.y and is there a workaround? I really don't want to have to move my network IP range - there are a lot of static IPs involved, host files, services, mappings, etc.
    Mac Mini Mac OS X (10.4.10)
    Mac Mini   Mac OS X (10.4.10)  

    Interesting idea. I can't try it now because I had to swap out the AXBS in order to get some work done since this is a showstopper. I may get another window tomorrow. I do seem to recall that the IP-address-setting page shows "10.0" as clear text followed by the 3rd octet as a dropdown and the 4th as a text box. So I don't think the GUI has a way of modifying the 2nd octet at all. If there was some way to telnet or ssh in to it I suspect some file could be modified but that may be the only hope. I just wish I knew why this artificial limitation exists. Maybe it's their way of making sure nobody ever tries to manage an IP space larger than 2**16 (which I don't want to do, I want a regular /24 space starting with 10.9.8).
    Mac Mini Mac OS X (10.4.10)
    Mac Mini Mac OS X (10.4.10)

Maybe you are looking for