How to use intel processor with a different monitor

I'd really like to buy a 24 inch imac but I'm concerned about the gloss screen and all the problems I've read about. I'm a professional photographer but can't afford a mac pro with cinima display. I really like the 20 inch 'white' monitor on my G4 iMac. Any thoughts on how to match an intel processor with a monitor of choice?

If you buy the iMac, just buy an external display of your choice and get a Mini-DVI to VGA or Mini-DVI to DVI adapter for your iMac and plug the display into the iMac. From there you can download 3rd party apps to shut off the iMacs screen and just use the matte external display as your main monitor.
I'd recommend getting a external display that uses DVI for your photography, much better quality image.

Similar Messages

How do I use Home Sharing with two different apple accounts?

How do I use Home Sharing with two different apple accounts?

Morning Saintine,
Thanks for using Apple Support Communities.
Home Sharing enables you to stream or transfer music, movies, TV shows, apps, and more among up to five authorized computers in your household. To do so, you will need to Turn on Home Sharing on each computer using the same Apple ID.
Understanding Home Sharing
http://support.apple.com/kb/HT3819
Hope this helps,
Mario

MultiCore Intel Processor with 64-bit support--how compares with Intel Core 2 Duo?

TurboTax Home & Business 2013 requires Multi Core Intel Processor with 64-Bit support. Does this mean it will not run on my MacBook with Intel Core 2 Duo?

https://ttlc.intuit.com/questions/1943476-64-bit-requirements-for-turbotax-mac?e vent=new_question

Another "This itunes account is set up to use family sharing with a different icloud account than Apple ID "

I saw another thread on the matter but thought I would post because the circumstances are different. Here is how it happened.
I have had an Apple Store account for years and until recently our family has only had our one Mac and my iPhone 4. Thus any purchases we have made on the Apple App Store were made only with this account.
We recently purchased two iPhone 5S's--one for my wife and one for my daughter. Neither had Apple IDs so first we set up my wife's iPhone and created an Apple ID for her. Next we used the Family Sharing feature to set up an account for our "under age 13" daughter.
Because I am still waiting for my iPhone 6 Plus to arrive, and because the iPhone 4 cannot upgrade to iOS 8, and because my Apple ID is the only account with any apps that have been purchased in prior years, I set up my wife as the Family Organizer but when I set up her account, I chose the option to "share purchases from a different account" and entered the information for my Apple ID.
My daughter is able to view my prior purchases on her iPhone, but when my wife tries to view my prior purchases, she receives the message "This iTunes account is set up to use Family Sharing with a different iCloud account than <her Apple ID>."
I hope Apple is reading this. I would be more than willing to help them on this one as this feature is one of the main reasons I put our family on iPhones.

I had this problem. I finally figured it out yesterday. Try this:
On the device that is having trouble seeing purchases, go to Settings>iCloud>Family Sharing> Then tap on the user of the device you are on. Under "Family Purchases" make sure it has the AppleID of the person for that device. Mine originally had my husbands AppleID in there (he is the Organizer), but I changed it to mine. That doesn't make it so that the purchases are under me. The purchases remained under my husband, but my ID had to be in this spot for it to work.
After that, I closed settings, then I went to Settings>iTunes and App Store> click on the AppleID and Sign Out, even if it has the right AppleID in there. Then Sign In again using the AppleID of the person on that device. Again-- even if it has the right ID in there to start, still sign out and back in.
See if they show up. If they don't show up still, try doing a restart (hold down power button and home button until it restarts).
They should show up by then, but if they don't, at that point, try to go into iCloud and Sign Out and back in.
I think the key is having the right ID in "Family Purchases". I hope this works for you.

How Can I do it with to different ipod on the same computer ?

I have and ipod(1GB) and my daughter has another ipod(4GB), how can we work with the same computer and itune for 2 different ipods ?
iPod(1GB) and a second iPod(4GB) Windows XP 2 different iPods on the same computer

this document might be of some help with that:
How to use multiple iPods with one computer
if you decide on a multiple-user-account strategy, this document might also be useful:
iTunes: How to share music between different accounts on a single computer

How to use EJB Remote with Netbeans7.0 ?

I try to create Session Bean in Netbeans 7.0 but when I select Remote then I have to select Java Application in Netbeans. It different from Netbeans 6.8 ,6.9 which in Netbeans6.8, 6.9 not have dropdown for select Java Application when we choose Remote. So I don't know how to use EJB Remote in Netbeans7.0 then I click finish. After that, I create Project is Enterprise Application Client. but in Main.java at this line
BLSessionRemote obj = (BLSessionRemote)ctx.lookup("TestBean");
It can't find BLSessionRemote in Session Beans. How to use EJB Remote with Netbeans7.0 ?

Why don't you ask this question in the Netbeans mailing lists, where it belongs. Come here when you have problems with code you wrote yourself.

How to use track effects with new version of GarageBand

In the version of GarageBand before this one, you could access different effects that you could manage and apply to the different tracks. Each track had an area containing its set of effects that were either activated or deactivated. With this removed, i am not sure how to add those same kind of effects. I am aware of the new nobs that are provided in order to mix and edit trebles, bass, mid, etc., but i want to be able to add different effects such as voice transformer, flanger, chorus, speech enhancer, bit crusher, bass amp, track echo, track reverb, amplifier, etc. I desperately need help finding out how to do this, as this was a major part of my mixing and producing with GarageBand, and without these given effects, i do not feel as comfortable using GarageBand.

zachseiden wrote:
How to use track effects with new version of GarageBand
this may help:
http://www.bulletsandbones.com/GB/GBFAQ.html#replacemissingtrackeffectsgbv10
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to install mountain lion with a different apple ID?

How to install mountain lion with a different apple ID?

More information would be helpful. If you are going to use a different Apple ID, you will need to buy Mountain Lion again. If you have a computer that has Mountain Lion installed, but Mountain Lion was purchased with a different Apple ID you must use the original Apple ID to download Mountain Lion.
Help us help You
I need to learn to type faster.

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

Can I use 1 computer with 2 different iTunes accounts and devices? We're afraid we're going to wipeout one library or the other if we do??

My son got an iPhone and wanted his own iTunes account. Now his computer died, and he wants to connect to his iTunes account on my computer. When it asks to sync the computer, a message comes up and we're afraid either his or my library are going to be wiped out by trying to do this. Is it possible to use 1 computer with 2 different iTunes accounts and devices without wiping out one of the libraries? Thanks for any info.

If the content was not originally purchased/synced to the device from your computer it will erase and replace the content from the device with that of the computer. If you have content that you want to backup you can transfer purchases http://support.apple.com/kb/ht1848 check this link out

How to use Oracle partitioning with JPA @OneToOne reference?

Hi!
A little bit late in the project we have realized that we need to use Oracle partitioning both for performance and admin of the data. (Partitioning by range (month) and after a year we will move the oldest month of data to an archive db)
We have an object model with an main/root entity "Trans" with @OneToMany and @OneToOne relationships.
How do we use Oracle partitioning on the @OneToOne relationships?
(We'd rather not change the model as we already have millions of rows in the db.)
On the main entity "Trans" we use: partition by range (month) on a date column.
And on all @OneToMany we use: partition by reference (as they have a primary-foreign key relationship).
But for the @OneToOne key for the referenced object, the key is placed in the main/source object as the example below:
@Entity
public class Employee {
@Id
@Column(name="EMP_ID")
private long id;
@OneToOne(fetch=FetchType.LAZY)
@JoinColumn(name="ADDRESS_ID")
private Address address;
EMPLOYEE (table)
EMP_ID FIRSTNAME LASTNAME SALARY ADDRESS_ID
1 Bob Way 50000 6
2 Sarah Smith 60000 7
ADDRESS (table)
ADDRESS_ID STREET CITY PROVINCE COUNTRY P_CODE
6 17 Bank St Ottawa ON Canada K2H7Z5
7 22 Main St Toronto ON Canada L5H2D5
From the Oracle documentation: "Reference partitioning allows the partitioning of two tables related to one another by referential constraints. The partitioning key is resolved through an existing parent-child relationship, enforced by enabled and active primary key and foreign key constraints."
How can we use "partition by reference" on @OneToOne relationsships or are there other solutions?
Thanks for any advice.
/Mats

Crospost! How to use Oracle partitioning with JPA @OneToOne reference?

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to use the namespace with a parser?

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

How to use union statement with declare & set function?

Hi Experts,
i have small query about how to use union statement with declare & set function?
Example as below :
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]

You have to create stored procedure in SQL only .
Like u must have create for Crystal .
You can execute procedure in query manager but you have to enter parameter manually..
example
Exec @Test '20140101' '20140501'
Every time user has to enter it manually in yyyymmdd format in case of date parameters.
Example
Create Proc [@Test]
as begin
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between @Name and @Name2
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between
between @Name and @Name2
end

How to use Stylesheet (XSL) with JSPX ?

Hi!
How to use XSL stylesheets with JSPX pages?
I want use an xsl transformations with jspx pages, I tried using the following syntax, but it didn't work....
<?xml version='1.0' stylesheet type="text/xsl" href="mathml.xsl" encoding='UTF-8'?>
<tr:html xmlns="http://www.w3.org/1999/xhtml">
what is the best way to use xslt with jspx pages?
Thanking you in advance,
Samba

Thanks Ric,
But My problem is not solved..
I'm getting the transformation working in plain HTML
The file given below :
<?xml-stylesheet type="text/xsl" href="mathml.xsl"?>

<html xmlns="http://www.w3.org/1999/xhtml"
>
<head>
<title>Content MathML Examples</title>
</head>
<body>
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</div>
</body>
</html>But the same thing is not working when put in jspx page..
And I tried to use JSTL as you have suggested :
But the content is not getting transformed.
Here is the jspx page :
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:c="http://java.sun.com/jsp/jstl/core"
          xmlns:x="http://java.sun.com/jsp/jstl/xml"
          xmlns:m="http://www.w3.org/1998/Math/MathML"
          xmlns:xh="http://www.w3.org/1999/xhtml">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document binding="#{backing_xsltTest.document1}" id="document1">
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<f:verbatim>
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
</f:verbatim>
<c:import var ="mathml" url="/mathml.xsl"/>
<x:transform xslt="${mathml}">
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</x:transform>
</div>
      <af:form binding="#{backing_xsltTest.form1}" id="form1">
      </af:form>
    </af:document>
</f:view>

</jsp:root>Can you please suggest where I'm doing wrong?
Thanking you in advance,
Samba

How to use intel processor with a different monitor

Similar Messages

Maybe you are looking for