How to use it, how to use it

usman

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Similar Messages

  • How can I get permission to use Apple's Airplay Technology for new and innovative Speaker System?

    Hi there!
    I want to integrate Airplay technology in a new and innovative Speaker System.
    I've searched the internet, but couldn't find anything.
    Does anybody know how to get the permission to use it?

    Apple
    1 Infinite Loop
    Cupertino, CA 95014
    408.996.1010
    ...ask to speak to someone about licen$ing.

  • How to delete when file in use by the finder?

    I have two files in my trash which won't delete. I get the error that they are being used by another program. Holding down option, using secure empty trash, using the terminal method of deleting the trash.. none of them work.
    So I did the terminal command: lsof /path-to-file and found out it was being used by Finder. I don't think I can exactly quit the Finder process in Activity Monitor.. so how can I get these files out of my trash?

    Thanks. Unfortunately, when I quit finder and try to delete the files in the trash by the following command:
    sudo rm -rf ~/.Trash/*
    It tells me "Directory not empty". Argghh..
    I feel like I've tried everything. Can someone give me some other suggestions? Thanks

  • How to find out the Transactions used per month & the USER who used that

    Hi,
    1)How to find out the Transactions used per month & the USER who used that?
    2)and can i get the above same for minimum 20 month?
    System : SAP- Enterprise Core Component.

    You can use my program...
    *& Report  Z_ABAP_TCODE_MONITOR
    *****&  Program Type          : Report                                 *
    *****&  Title                 : Z_ABAP_TCODE_MONITOR                   *
    *****&  Transaction code      : ZTCODE_USAGE                           *
    *****&  Developer name        : Shailendra Kolakaluri                  *
    *****&  Deveopment start date : 26 th Dec 2011                         *
    *****&  Development Package   : ZDEV                                   *
    *****&  Transport No          : DEVK906086                                       *
    *****&  Program Description   : This program is to display
    *List all tcodes executed during previous day.
    *& Show the number of users executing tcodes
    *& Modification history
    REPORT  Z_ABAP_TCODE_MONITOR.
    *& List all tcodes executed during previous day.
    *& Show the number of users executing tcodes
    TYPE-POOLS : slis.
    DATA: ind TYPE i,
          fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          layout TYPE slis_layout_alv,
          variant TYPE disvariant,
          events  TYPE slis_t_event WITH HEADER LINE,
          heading TYPE slis_t_listheader WITH HEADER LINE.
    *REPORT  z_report_usage.
    TYPES: BEGIN OF zusertcode,
      date   TYPE swncdatum,
      user   TYPE swncuname,
      mandt     TYPE swncmandt,
      tcode     TYPE swnctcode,
      report TYPE swncreportname,
      count     TYPE swncshcnt,
    END OF zusertcode.
    *data   : date type n.
    DATA: t_usertcode  TYPE swnc_t_aggusertcode,
          wa_usertcode TYPE swncaggusertcode,
          wa           TYPE zusertcode,
          t_ut         TYPE STANDARD TABLE OF zusertcode,
          wa_result    TYPE zusertcode,
          t_result     TYPE STANDARD TABLE OF zusertcode.
    PARAMETER: month TYPE dats DEFAULT sy-datum.
    *PARAMETER: date TYPE dats.
    *select-options : username for wa_usertcode-account.
    START-OF-SELECTION.
    PERFORM get_data.
    PERFORM get_fieldcatalog.
      PERFORM set_layout.
    PERFORM get_event.
    PERFORM get_comment.
      PERFORM display_data.
    FORM get_data .
    *date = sy-datum - 2 .
    After start-of-selection add this line (parameter Month required 01 as day).
      concatenate month+0(6) '01' into month.
      CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
        EXPORTING
          component     = 'TOTAL'
          ASSIGNDSYS    = 'DEV'
          periodtype    = 'M'
          periodstrt    = month
        TABLES
          usertcode     = t_usertcode
        EXCEPTIONS
          no_data_found = 1
          OTHERS        = 2.
      wa-date  = month.
    *wa-date  = date.
      wa-mandt = sy-mandt.
    wa_usertcode-account = username.
      LOOP AT t_usertcode INTO wa_usertcode.
        wa-user = wa_usertcode-account.
        IF wa_usertcode-entry_id+72 = 'T'.
          wa-tcode  = wa_usertcode-entry_id.
          wa-report = space.
        ELSE.
          wa-tcode  = space.
          wa-report = wa_usertcode-entry_id.
        ENDIF.
        COLLECT wa INTO t_ut.
      ENDLOOP.
      SORT t_ut BY report ASCENDING.
      CLEAR: wa, wa_result.
    endform.
    FORM get_fieldcatalog .
    fcat-tabname     = 't_ut'.
    fcat-fieldname   = 'DATE'.
    fcat-seltext_l   = 'Date'.
    fcat-key         = 'X'.
    APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'MANDT'.
      fcat-seltext_l   = 'Client'.
      fcat-key         = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'USER'.
      fcat-seltext_l   = 'User Name'.
      fcat-key         = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'TCODE'.
      fcat-seltext_l   = 'Transaction Code'.
      fcat-key         = 'X'.
      APPEND fcat.
    ENDFORM.
    *&      Form  SET_LAYOUT
          text
    -->  p1        text
    <--  p2        text
    FORM set_layout .
      layout-colwidth_optimize = 'X'.
    ENDFORM.                    " SET_LAYOUT
    *&      Form  GET_EVENT
          text
    -->  p1        text
    <--  p2        text
    *FORM get_event .
    events-name = slis_ev_top_of_page.
    events-form = 'TOP_OF_PAGE'.
    APPEND events.
    *ENDFORM.                    " GET_EVENT
    **&      Form  GET_COMMENT
          text
    -->  p1        text
    <--  p2        text
    *FORM get_comment .
    DATA: text(30).
    text = 'Billing Report'.
    heading-typ = 'H'.
    heading-info = text.
    APPEND heading.
    *ENDFORM.                    " GET_COMMENT
    **&      Form  top_of_page
          text
    -->  p1        text
    <--  p2        text
    *FORM top_of_page .
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
         it_list_commentary       = heading[]
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
    *ENDFORM.                    " top_of_page
    *&      Form  DISPLAY_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM display_data .
      sort t_ut[].
    DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = sy-cprog
          is_layout          = layout
          it_fieldcat        = fcat[]
          i_save             = 'A'
          is_variant         = variant
          it_events          = events[]
        TABLES
          t_outtab           = t_ut
        EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " DISPLAY_DATA

  • I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?

    I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?  Thanks to you from the UnTechie

    The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
    You cannot reverse the upgrade.

  • How do i use Facebook in china using my macbook pro?

    how do i use Facebook in china using my macbook pro?

    Have a look to the right of this page under 'More like this'.
    Facebook may not be available.

  • I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    do I need to create another account with a different email account
    Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

  • I have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

    i have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

    If the purchases are all from the same account then you can share the content by authorizing each device.
    If you have separate accounts then you have to be authorized to use the content purchased from another account.
    MJ

  • Does anyone know how i can view PDF files using Galaxy Note 2?

    Does anyone know how i can view PDF files using Galaxy Note 2?
    This is what i have been doing;
    I click on the file i wish to view (via a portal)
    this file goes to notification widget (i drag down screen)
    notification/message says download complete
    i click on notification/message
    nows it says complete action using (here i only have 2 icon options 1= DB Text Editor 2 = HTML Viewer)
    I have installed Adobe Reader.

    Can you confirm if the downloaded file is a pdf file, that is it ends with .pdf?

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • When I try to login to facetime and imessage, I type in my apple ID and password and it tells me that the email is already in use. How can I fix that?

    When I try to login to Face time and Imessage, (on my iphone 4) it tells me to put my apple ID and password but then tells me that the email is already in use. How do I fix that?

    im having the same problem so how is this suppose to help

  • HT4623 I'm continually getting a pop-up message on my iPhone that asks me to enter my Apple ID password for an email address that I no longer use.  How do I get rid of it?

    I'm continually getting a pop-up message on my iPhone asking me to enter my Apple ID password for a email address I no longer use.  How do I make it stop?

    If you are signed into your current iCloud ID you shouldn't be prompted for the old ID unless there is another service still signed into it.  Check the ID in iMessage (Settings>Messages>Send & Receive), FaceTime (Settings>FaceTime), Game Center (Settings>Game Center), the iTunes store (Settings>iTunes & App Store), etc. to make sure you aren't still signed in with the old ID.  If you are, tap the ID, sign out, then sign back in with the new ID.

  • When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my account keeps popping up on his phone. How can we change the ID on his phone?

    When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my apple ID email address keeps popping up on his phone when he tries to download an app. We do not want to have all of the same apps on our phones. How can we change the ID on his phone? I already tried going to Settings>iTunes &App Store> and changing the Apple ID to his account email and that did not solve the problem. To make things worse, I recently changed my Apple ID email address (without getting a new ID) and I do not remember my old password (and this is the address that is popping up on his phone). He does not have any music on his phone and all of the Apps that he has are free.  Any help you could offer would be great (-:

    All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.

  • How To Perform Lot Split Transactions Using Transaction Open Interface (MTI)

    Can anyone give me some guidance on how to perform lot split transaction using MTI?
    I am using the following code:
    DECLARE
    l_transaction_type_id NUMBER := 83;
    l_transaction_action_id NUMBER := 41;
    l_transaction_source_type_id NUMBER := 13;
    l_org_id NUMBER := 1884;
    l_txn_header_id NUMBER;
    l_txn_if_id1 NUMBER;
    l_txn_if_id2 NUMBER;
    l_txn_if_id3 NUMBER;
    l_parent_id NUMBER;
    l_sysdate DATE;
    l_item_id NUMBER :=287996;
    l_user_id NUMBER;
    l_distribution_account_id NUMBER;
    l_exp_date DATE;
    BEGIN
    --For Lot Merge, there should be only one resultant lot.
    --The transaction_quantity populated in MTI/MTLI should be the entire
    --quantity that is available to transact for the org/sub/item/locator/LPN in
    --that particular lot number.
    --Get transaction_header_id for all the MTIs
    SELECT APPS.mtl_material_transactions_s.NEXTVAL
    INTO l_txn_header_id
    FROM sys.dual;
    --Get transaction_interface_id of resultant record
    SELECT APPS.mtl_material_transactions_s.NEXTVAL
    INTO l_txn_if_id1
    FROM sys.dual;
    l_parent_id := l_txn_if_id1;
    l_sysdate := SYSDATE;
    l_user_id := -1; --substitute with a valid user_id
    l_distribution_account_id := NULL; --needed for lot translate
    l_exp_date := NULL; --set if required
    --Populate the MTI record for resultant record
    INSERT INTO MTL_TRANSACTIONS_INTERFACE
    transaction_interface_id,
    transaction_header_id,
    Source_Code,
    Source_Line_Id,
    Source_Header_Id,
    Process_flag,
    Transaction_Mode,
    Lock_Flag,
    Inventory_Item_Id,
    revision,
    Organization_id,
    Subinventory_Code,
    Locator_Id,
    Transaction_Type_Id,
    Transaction_Source_Type_Id,
    Transaction_Action_Id,
    Transaction_Quantity,
    Transaction_UOM,
    Primary_Quantity,
    Transaction_Date,
    Last_Update_Date,
    Last_Updated_By,
    Creation_Date,
    Created_By,
    distribution_account_id,
    parent_id,
    transaction_batch_id,
    transaction_batch_seq,
    lpn_id,
    transfer_lpn_id
    VALUES
    l_txn_if_id1, --transaction_header_id
    l_txn_header_id, --transaction_interface_id
    'INV', --source_code
    -1, --source_header_id
    -1, --source_line_id
    1, --process_flag
    3, --transaction_mode
    2, --lock_flag
    l_item_id, --inventory_item_id
    null, --revision
    l_org_id, --organization_id
    'EACH', --subinventory_code
    1198, --locator_id
    l_transaction_type_id, --transaction_type_id
    l_transaction_source_type_id, --transaction_source_type_id
    l_transaction_action_Id, --l_transaction_action_id
    100000, --transaction_quantity
    'EA', --transaction_uom
    100000, --primary_quantity
    l_sysdate, --Transaction_Date
    l_sysdate, --Last_Update_Date
    l_user_id, --Last_Updated_by
    l_sysdate, --Creation_Date
    l_user_id, --Created_by
    l_distribution_account_id, --distribution_account_id
    l_parent_id, --parent_id
    l_txn_header_id, --transaction_batch_id
    2, --transaction_batch_seq
    NULL, --lpn_id (for source MTI)
    NULL --transfer_lpn_id (for resultant MTIs)
    --Insert MTLI corresponding to the resultant MTI record
    INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE(
    transaction_interface_id
    , Source_Code
    , Source_Line_Id
    , Process_Flag
    , Last_Update_Date
    , Last_Updated_By
    , Creation_Date
    , Created_By
    , Lot_Number
    , lot_expiration_date
    , Transaction_Quantity
    , Primary_Quantity
    VALUES (
    l_txn_if_id1 --transaction_interface_id
    , 'INV' --Source_Code
    , -1 --Source_Line_Id
    , 'Y' --Process_Flag
    , l_sysdate --Last_Update_Date
    , l_user_id --Last_Updated_by
    , l_sysdate --Creation_date
    , l_user_id --Created_By
    , 'Q0000.1' --Lot_Number
    , l_exp_date --Lot_Expiration_Date
    , 100000 --transaction_quantity
    , 100000 --primary_quantity
    INSERT INTO MTL_TRANSACTIONS_INTERFACE
    transaction_interface_id,
    transaction_header_id,
    Source_Code,
    Source_Line_Id,
    Source_Header_Id,
    Process_flag,
    Transaction_Mode,
    Lock_Flag,
    Inventory_Item_Id,
    revision,
    Organization_id,
    Subinventory_Code,
    Locator_Id,
    Transaction_Type_Id,
    Transaction_Source_Type_Id,
    Transaction_Action_Id,
    Transaction_Quantity,
    Transaction_UOM,
    Primary_Quantity,
    Transaction_Date,
    Last_Update_Date,
    Last_Updated_By,
    Creation_Date,
    Created_By,
    distribution_account_id,
    parent_id,
    transaction_batch_id,
    transaction_batch_seq,
    lpn_id,
    transfer_lpn_id
    VALUES
    l_txn_if_id1, --transaction_header_id
    l_txn_header_id, --transaction_interface_id
    'INV', --source_code
    -1, --source_header_id
    -1, --source_line_id
    1, --process_flag
    3, --transaction_mode
    2, --lock_flag
    l_item_id, --inventory_item_id
    null, --revision
    l_org_id, --organization_id
    'EACH', --subinventory_code
    1198, --locator_id
    l_transaction_type_id, --transaction_type_id
    l_transaction_source_type_id, --transaction_source_type_id
    l_transaction_action_Id, --l_transaction_action_id
    100000, --transaction_quantity
    'EA', --transaction_uom
    100000, --primary_quantity
    l_sysdate, --Transaction_Date
    l_sysdate, --Last_Update_Date
    l_user_id, --Last_Updated_by
    l_sysdate, --Creation_Date
    l_user_id, --Created_by
    l_distribution_account_id, --distribution_account_id
    l_parent_id, --parent_id
    l_txn_header_id, --transaction_batch_id
    3, --transaction_batch_seq
    NULL, --lpn_id (for source MTI)
    NULL --transfer_lpn_id (for resultant MTIs)
    --Insert MTLI corresponding to the resultant MTI record
    INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE(
    transaction_interface_id
    , Source_Code
    , Source_Line_Id
    , Process_Flag
    , Last_Update_Date
    , Last_Updated_By
    , Creation_Date
    , Created_By
    , Lot_Number
    , lot_expiration_date
    , Transaction_Quantity
    , Primary_Quantity
    VALUES (
    l_txn_if_id1 --transaction_interface_id
    , 'INV' --Source_Code
    , -1 --Source_Line_Id
    , 'Y' --Process_Flag
    , l_sysdate --Last_Update_Date
    , l_user_id --Last_Updated_by
    , l_sysdate --Creation_date
    , l_user_id --Created_By
    , 'Q0000.1' --Lot_Number
    , l_exp_date --Lot_Expiration_Date
    , 100000 --transaction_quantity
    , 100000 --primary_quantity
    --Get transaction_interface_id of Source record-1
    SELECT APPS.mtl_material_transactions_s.NEXTVAL
    INTO l_txn_if_id2
    FROM sys.dual;
    --Populate the MTI record for Source record-1
    INSERT INTO MTL_TRANSACTIONS_INTERFACE
    transaction_interface_id,
    transaction_header_id,
    Source_Code,
    Source_Line_Id,
    Source_Header_Id,
    Process_flag,
    Transaction_Mode,
    Lock_Flag,
    Inventory_Item_Id,
    revision,
    Organization_id,
    Subinventory_Code,
    Locator_Id,
    Transaction_Type_Id,
    Transaction_Source_Type_Id,
    Transaction_Action_Id,
    Transaction_Quantity,
    Transaction_UOM,
    Primary_Quantity,
    Transaction_Date,
    Last_Update_Date,
    Last_Updated_By,
    Creation_Date,
    Created_By,
    distribution_account_id,
    parent_id,
    transaction_batch_id,
    transaction_batch_seq,
    lpn_id,
    transfer_lpn_id
    VALUES
    l_txn_if_id2, --transaction_header_id
    l_txn_header_id, --transaction_interface_id
    'INV', --source_code
    -1, --source_header_id
    -1, --source_line_id
    1, --process_flag
    3, --transaction_mode
    2, --lock_flag
    l_item_id, --inventory_item_id
    null, --revision
    l_org_id, --organization_id
    'EACH', --subinventory_code
    1198, --locator_id
    l_transaction_type_id, --transaction_type_id
    l_transaction_source_type_id, --transaction_source_type_id
    l_transaction_action_Id, --transaction_action_id
    -200000, --transaction_quantity
    'EA', --transaction_uom
    -200000, --primary_quantity
    l_sysdate, --Transaction_Date
    l_sysdate, --Last_Update_Date
    l_user_id, --Last_Updated_by
    l_sysdate, --Creation_Date
    l_user_id, --Created_by
    l_distribution_account_id, --distribution_account_id
    l_parent_id, --parent_id
    l_txn_header_id, --transaction_batch_id
    1, --transaction_batch_seq
    NULL, --lpn_id (for source MTI)
    NULL --transfer_lpn_id (for resultant MTIs)
    --Insert MTLI corresponding to the Source record-1
    INSERT INTO MTL_TRANSACTION_LOTS_INTERFACE(
    transaction_interface_id
    , Source_Code
    , Source_Line_Id
    , Process_Flag
    , Last_Update_Date
    , Last_Updated_By
    , Creation_Date
    , Created_By
    , Lot_Number
    , lot_expiration_date
    , Transaction_Quantity
    , Primary_Quantity
    VALUES (
    l_txn_if_id2 --transaction_interface_id
    , 'INV' --Source_Code
    , -1 --Source_Line_Id
    , 'Y' --Process_Flag
    , l_sysdate --Last_Update_Date
    , l_user_id --Last_Updated_by
    , l_sysdate --Creation_date
    , l_user_id --Created_By
    , 'Q0000' --Lot_Number
    , l_exp_date --Lot_Expiration_Date
    , -200000 --transaction_quantity
    , -200000 --primary_quantity
    END;

    the first MTI record should be the source record ...ie. it should have transaction quantity as negative.
    new set of MTI records should have positive transaction quantities.
    Also ensure that sum of transaction quantities for the set should be 0...
    What is the error that you are getting?
    Thanks,
    Hrishi.

  • How to print text on container using oop on alv list

    Hello Guru's,
             pl guide me how to print text on container using alv list-display which have interactive events  using     oop classes/methods ...
                    I want to print hard coded text on coantainer , on double clicking it will call another screen.
    Pl Help..
    Message was edited by:
            paresh sonavane

    Hi Paresh,
           1.      Go to the Layout and Create One custom container box and give name it.
            2. Custom Container is the one type of tool and its used for Displaying the Reports 
                with the use of ABAP Objects.
            3. Go to se38 and Write The Following Code.
    tables ZTEAM_GD.
    DATA : OBJ TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
           OBJ1 TYPE REF TO CL_GUI_ALV_GRID.
    DATA IT_TEAM LIKE TABLE OF ZPLAYER_BAT_DET       .
    SELECT * FROM ZPLAYER_BAT_DET INTO TABLE IT_TEAM.
    CREATE OBJECT OBJ
      EXPORTING
        CONTAINER_NAME              = 'ALV'.          -
    > Give ur Container Name
    CREATE OBJECT OBJ1
      EXPORTING
        I_PARENT          = OBJ.
    CALL METHOD OBJ1->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
        I_STRUCTURE_NAME              = 'ZPLAYER_BAT_DET'
      CHANGING
        IT_OUTTAB                     = IT_TEAM.
    *CALL METHOD OBJ1->SET_DROP_DOWN_TABLE
    EXPORTING
       I_STRUCTURE_NAME = 'ZTEAM_GD'
    CHANGING
       IT_OUTTAB        = IT_TEAM.
    CALL SCREEN 9000.
    *&      Module  USER_COMMAND_9000  INPUT
          text
    MODULE USER_COMMAND_9000 INPUT.
    CASE SY-UCOMM.
    WHEN 'EXT'.
      LEAVE PROGRAM.
    ENDCASE.
    ENDMODULE.                 " USER_COMMAND_9000  INPU     
    Thanks.
    Reward If Helpful.

  • How to update the sent mail using SO_NEW_DOCUMENT_ATT_SEND_API1

    I have a requirement to update/ append the sent mail like a trail.Since i am sending mails using SO_NEW_DOCUMENT_ATT_SEND_API1, how can i update new contents to sent mails using this RFC???Please help me.

    you may have to store content of each time mail send then only, you can send with history.

Maybe you are looking for

  • Sql injection character fields

    Is it true that with MSSQL in the background, character fields can't be used for sql injection? A)   One source says that in MSSQL single quotes are escaped into double quotes. B)   Another source says that " SQL injection (within ColdFusion apps) is

  • I7 running nvidia is there a problem?

    hi peeps is it just me or is that most of the problems with graphics card seem to be nvida based. Or is it just me but the ATI do not seem to be suffering same problems. so could it be drives or is it the X58 chipset ? Well i have tried sevaral nvidi

  • Sent items from Blackberry not appearing in Outlook sent items

    I used to use hotmail and all sent items appeared in outlook sent items, I am now using outlook and they are not.  Please explain in very very simple language using no IT terminology(!!!) how I make my blackberry sent items show up in outlook! Thanks

  • One Sold to party and 250 ship to party (MTO Process)

    Dear Experts, Please provide me the solution with your valuable experience. Issue is: We are working on MTO process. and I am working in SD on sales order. issue is here that I have one SP(Sold to party) and many ship to party. I have created 250 Shi

  • Overlapping two JPanels on a JLayeredPane

    I am having some problems overlapping two JPanels on a JLayeredPane for some reason only one of them shows when I compile the program! Any help would be greatly appreciated The code is the following: import java.lang.*; import javax.swing.*; import j