How to use IXXAT CAN to USB in LabVIEW for CAN read, when I am having VCI V3 driver?

 I am having VCI V3 driver for IXXAT CAN to USB.How to use that in LV for reading data from CAN device.

Did you check the settings to make sure that the Password Manager is enabled?
*Tools > Options > Security: Passwords: "Remember passwords for sites"
Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
See also:
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*http://kb.mozillazine.org/signon.autofillForms

Similar Messages

  • Can i use the lightning to usb camera adapter for sony cybershotdsc-w380

    DDoes anyone know how to use a lightning to sub camera adapter for a Sony cyber shot doc-w830

    This discussion may help.
    It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
    Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
    Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.

  • Can I use iphone as external USB analog modem for dialing into switches?

    Can I use iphone as external USB analog modem for accessing data switches?
    I want to use hyperterminal but don't have a land line to use and wanted to use my iphone as my hard land line..this isn't for tethering for internet access...make sense?

    apple store sale guy said this set up will work but it did not. just bought my TC last monday.

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • How to use BAPI to add a new version for a claim number in WTY transaction.

    How to use BAPI to add a new version for a claim number in WTY transaction.
    I am using  function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
    It needs to copy all contents of previous version to a new version.
    While doing so i am unable to copy fields like valic valoc etc. Any ways by which  i can copy this values.
    WTY will update PNWTYH , PNWTYV and PVWTY tables.
    Thanking you,
    Lokesh.

    Hi Vishnu,
    You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
    Rewards point if you think this info is useful
    Regards,
    Dipender Singh

  • HT1343 how to use the options with F10, F11, F11 for turning the sound up or down or mute?

    Hi, I'm Hannah. I'm using a Mac. Can you show me how to use the options with F10, F11, F12 for turning the sound up, or down or mute? Thank you very much

    Normally simply pressing them should do what you want, F10 to mute; F11 to decrease volume; F12 to increase volume. However, it's possible that you have a box ticked in Keyboard preferences which modifies the behaviour of the keys, requiring you to also hold down the Fn key (bottom left key on the keyboard) to enable the function.
    Check System Preferences>Keyboard to makes sure the box indicated in the image isn't ticked.

  • Itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?

    ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • I got a software license crtificate ,how to use it??? i   paied    for it.

    I got a software license crtificate ,how to use it??? i   paied    for it.

    Which program, and where did you buy?
    Do you have a redemption code?
    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • I use Yahoo Calendar on my IPhone.  For whatever reason when I go into my calendar I will see at the top of the screen that 5 or 6 "calendars" are being used and one of them is the one I called Dana_Gardner and is legitimate, the others are randomly named

    I use Yahoo Calendar on my IPhone.  For whatever reason when I go into my calendar I will see at the top of the screen that 5 or 6 "calendars" are being used and one of them is the one I called Dana_Gardner and is legitimate, the others are randomly named with letters and numbers. Why is the IPhone creating additional "calendars"? I only asked for one to be set-up. I don't understand, I have to go into the calendar settings daily and uncheck these un-asked for calendars. Help!

    Mine is doing the same thing.  I deleted the whole account from the mail settings and it got rid of most of the extra calendars.  But there are still 2 gibberish ones left.

  • How to use Boot Camp without USB drive?

    Hi
    Trying to install Windows via BootCamp, I came across a real nuisance: where I am, the only way to connect to the Internet is using a dongle. When the dongle is in, there's no way to squeeze another USB plug next to it; hence I can't let BootCamp download support files straight onto a USB drive. Needless to say, if I insert the USB drive, I can't use the Internet...
    Is there any way that BootCamp can first download those files elsewhere so that I can then copy them onto the USB drive once the dongle is removed?
    In case anyone's wondering, I can't get hold of a USB extension cable either at the moment...
    Many thanks for any suggestions!
    M

    use and usb hub they are plentyfull and comes with 2 to 7 and up usb ports
    best get one which get ac power as usb have a limitation as to how much power it can provide

  • How to use Time Capsule with USB HD attached

    I recently bought a 500 mb TC, so am somewhat a newbie to it, and am already wondering if I should have bought the 1 Terrabyte model.
    I am trying to figure out exactly how I can use the USB HD facility on the TC. Is the point of this that I can achieve extra Time Machine/Time Capsule backup-capacity automatically, i.e. if space runs out on the TC it will go to the USB HD automatically? Or do I have to choose this USB HD in Time Machine options?
    Are there other ways of using the attached USB HD? For example to mirror the TC, for an extra level of safety. Or could I choose within Time Machine to backup only to this USB drive? Or could you use it as an additional Hard Drive that is nothing to do with Time Machine backups at all, just an extra HD accessed wirelessly?
    Could you even add extra Hard Drives to Time Capsule with some sort of USB hub or in a chain.
    I can't seem to find info about this in manual , so replies gratefully received.

    funkster wrote:
    I recently bought a 500 mb TC, so am somewhat a newbie to it, and am already wondering if I should have bought the 1 Terrabyte model.
    The 500GB model is a much better value. As you've stated, you could add more HDD capacity when the prices come down.
    I am trying to figure out exactly how I can use the USB HD facility on the TC. Is the point of this that I can achieve extra Time Machine/Time Capsule backup-capacity automatically, i.e. if space runs out on the TC it will go to the USB HD automatically?
    No, TM cannot span from the current backup (internal TC HDD) to the USB HDD connected
    Or do I have to choose this USB HD in Time Machine options?
    Yes, you have to choose it. It also needs to be formatted HFS+ if it already isn't. You can only format the USB HDD when connected to your Mac. Disk Utility does not work on the TC HDD nor the USB HDD connect to the TC.
    Are there other ways of using the attached USB HD? For example to mirror the TC, for an extra level of safety.
    Yes, via AirPort Utility -> Disks -> Archive. It clones the internal HDD. It is NOT incremental.
    Or could I choose within Time Machine to backup only to this USB drive?
    No, TM cannot backup a NAS (i.e. the USB HDD connected to the TC).
    Or could you use it as an additional Hard Drive that is nothing to do with Time Machine backups at all, just an extra HD accessed wirelessly?
    Yes.
    Could you even add extra Hard Drives to Time Capsule with some sort of USB hub or in a chain.
    Yes.
    I can't seem to find info about this in manual , so replies gratefully received.
    Lots of good questions. You are right that the info isn't in the manual.

  • I do not know how to use i cloud. or i tunes anymore for that matter. can someone help me?

    I had not updated my Itunes in a while. when i got my mac i updated it to the latest version and i guess i set up i cloud but I have no idea how to use it. i have 1163 songs in my itunes library but they literally only show up some times and others they dont. it says i have all those songs in my music library on my phone but then half of them dont play and i dont understand why? most of my songs have a little cloud next to them like they need to be downloaded but i dont understand????
    I just want all my music on my phone.
    my phone also cant back up to icloud becase there is no storage but i have 3 backups under my back up and i dont know what to do? i lost my phone recently and i think it still has my old back up but i dont wanna delete that one cause im scared its gonna delete everything and i just really dont know what to do.
    does anyone know if im doing something wrong or what i can do to back up to my old back up or what?
    my contacts also always change names. or i put a number in my phone and it literally disappears 2 minutes later. ill save the number again and it does it again but then i look back in a ciuple of weeks and i have 4 of the same contact. its very frustrating

    Did you enable the "Find my..." function BEFORE you lost it?

  • How to use 3110 as a usb modem in Mac

    I use 3110 as a usb modem in my Mac,but it can't work,the Mac can find two usb modem when I plug my 3110,each can't work,I see the log find my modem no responses for the AT command,so it can't work,my phone is good,beacuse I can use it in Windows as usb modem, and I also can use bluetooth modem in Mac,after modify isyn ,I can use isyn when i use bluetooth but can't work when i use usb cable,and I hope i can use usb modem ,is anybody use 3110 as usb modem?thank's your help!

    Hi,
    Listed below is the step by step intructions to configure the Nokia device as a modem to a mac.
    Steps:
    Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
    To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
    In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
    Exit Settings. Your device is now ready to be used as a modem for your Mac!
    Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here: http://europe.nokia.com/get-support-and-software/download-software/device-as-a-modem/connect-to-your...
    Note: Preferred mode is USB as it much faster than Bluetooth.
    Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
    Click on Advanced Tab > Modem tab
    - Vendor : Nokia
    -Model:GPRS (GSM/3G)
    -Telephone Number: *99***1# (contact your operator to get this settings)
    -APN: airtelgprs.com (contact your operator to get this settings)
    CID: 1
    Once connected it will be highlighted in green.
    Hopefully this helps.
    Cheers
    Sandy
    Message Edited by sandy2410 on 30-Mar-2009 04:52 AM
    Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

  • How to use Terminal with KeySpan USB serial adaptor cable?

    I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
    Thanks so much, Jason Sjobeck

    Hi, Jason. Welcome to the Discussions.
    You wrote: "All feedback is most appreciated."OK.
    1. Have you considered discussing this with Keyspan Support?
    2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
    3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
    Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
    It appears your inquiry seems to be a somewhat esoteric topic.
    4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
    5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
    • This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • How to use Extech Instruments model 407123 with Labview 7.1

    I am pretty new to Labview.  With the help of this forum I was able to configure my DAQpad 6020E with my Labview 7.1.
    Now I am looking at using an Extech Instruments Hot Wire Thermo-Anemometer (407123) in my experiment and running it through Labview.  Based on my research, I was led to believe that I should use the Instrument Assistant I/O and NI-Visa, but I am having a lot of difficulties.  First off, the Thermo-anemometer is wired for RS232 and I have it connected to an RS232 to USB converter, which is then plugged into my computer.  I have the driver for the converter.  When I plug the thermo-anemometer into my computer, MAX reads it as a serial port and it is listed as COM3.  MAX claims that the device is working properly.  However, when I run Labview's Instrument Assistant I/O, and tell it to read data I get a bff0015 error and it says that the device timed out.  I have tried changing the time and I still get the same error.  I am assuming this means that Labview and my device are not communicating.
    I have seen some mention of instrumentation drivers, but I haven't been able to find any for my particular device.  I am assuming that is the root of my problem, and that if I had an instrument driver to run my device in Labview that it would work properly.  So here are my questions.
    1)  What do I need to take data from a third party thermo-anemometer in Labview?
    2)  Am I correct in thinking I need some sort of instrument driver?  And if so, where could I find one (I have already searched for one and did not find it)?
    3)  Is it possible and practical to take data through Labview from a DAQpad and a third party instrument at the same time?
    4)  Are there any guides or tutorials I could use that may show me how to accomplish what I'm trying to do?
    Thanks.
    Solved!
    Go to Solution.

    I've been trying numerous things to get this to work, and I've had little luck in getting exactly what I want.  I have been able to get data from some example VI's designed for serial read, and I was able to tweak them some, but this data seems to be only able to be saved to a .txt file.  I want the data from my anemometer to be read along with the time it was read and stored in a spreadsheet.
    Instrument I/O Assistant appears to have exactly what I need to do this, but I can't get it to work.  I keep getting the bff0015 error, which is that the device timed out before the operation completed.  I don't understand why it is doing this, or how to stop it, because I am able to get data from the device otherwise.  In fact, following these steps I can see the exact data I want:
    1.  Open Instrument I/O Assistant
    2.  On "Select Instrument" I select the correct port and then click "properties"
    3.  At the top corner of the window I click "Open VISA Session"
    4.  Once there, I go to the "Basic I/O" tab.  Within that tab I click the "Read" tab.
    Please see attached screenshots if you want to see what I'm talking about below.
    At this point I can read the data from my device.  The default count value is 1024 bits.  If I click "execute" the device is read and I can read the data in the textbox that says "buffer."  However, my device only makes one 16-bit reading every 1.6 seconds, so I have to let the device sit for some time before it can fill the buffer up with 1024 bits.  If I don't, the reading takes place, I can see all of my data in the buffer, but the "Return Count" value on the screen is something significantly less than the "Count" value.  This makes sense because the buffer did not have time to fill.  Needless to say, the "Return Value" says "bff0015" which means it would return the time-out error.
    If I wait for the full time for the buffer to fill, OR if I change the "count" value to something significantly lower, say... 32 bits, the buffer "fills" much faster, the "return count" count is correct, and the "return value" reads "3FFF0006" which I assume is a standard code meaning everything went correctly.  I also notice that if I wait long enough, the buffer will continue to fill, and I can click "Execute" many times rapidly and get readings instantly.  I can tell that the program is just reading data stored in the buffer when it doesn't take a second to perform the reading, and if I continue to click "Execute" rapidly, I will eventually expend the data stored in the buffer and I will start to see the "fresh" readings again.
    So here is my question.  How do I lower the expected "count" value in the actual "Instrument I/O Assistant"?  I can do it in the "Open VISA session" under properties, but the only thing I can change in the Instrument I/O Assistant is the timeout value, but even when I set the value to 5 minutes, I still get the time out error.  What else can I do?
    Attachments:
    Instrument IO view select.pdf ‏119 KB
    Instrument IO view read.pdf ‏125 KB

Maybe you are looking for