How to use JavaFX in LAN, No internet

Hi, I need help, My PC works in LAN, not chance to link internet.
so I can not link dtfx.js and dl.javafx.com, I can not use JavaFX in browser.
Thanks.

See this forum thread:
JavaFX

Similar Messages

How to use mobile as a wifi internet on pc...

Hello, i want to connect my laptop to internet by using my nokia e71 wifi because my have no wifi. so plz tell me how can i connect my laptop to internet by using mobile wifi?

You need to download and install the latest Ovi suite and install it on your laptop. Connect your phone to your laptop via usb or bluetooth in PC Suite mode. In Ovi suite, goto Tools > Connect to Internet. After setting your country and carrier, the suite will connect you to the internet via your phone.
Note that this will connect you using your phone carrier's network, so you will incur data costs on your phone plan.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Anybody have any example on how to use javafx.stage.Popup

I wants to popup an customerize UI stage to let user to something, and found there have a javafx.stage.Popup class. Any example for how to use it, seems it no titile bar and not OK and cancel button? Search for Forum seems don't find an useful one.
Edited by: 931222 on Oct 22, 2012 8:54 AM

follow up.

How to use n82's wlan, as internet connection for ...

Hi everyone!
I have a pc without wlan connection and a n82. I have a wireless access point in my room. I want to use the internet connection on my pc, with n82's wlan. How can I use my n82's wlan for sharing the internet connection thought usb cable? Is it possible at all?
Thanks for reply!
VBalu987

although the phone can be used as a modem it can't be used as WLAN switch or adapter, so it's not possible to do so, im afraid.
you need to get Wireless lan adapter for you laptop.
Fear not those who argue but those who dodge

How to use 2 TMG Servers for Internet Access

Hi there,
This is what we have setup at the moment.
We have two TMG 2010 SP2 Servers, let's call them TMG1 & TMG2. They sit in two different sites (physically not logically) which I will refer to as Site1 and Site2. TMG1 sits in Site1 and TMG2 in Site2.
All internal users access the Internet via TMG1. They all have TMG Clients installed and they receive TMG1 as their proxy server (WPAD) via our DHCP servers.
I feel bad to see that TMG2 cannot take a little bit of traffic off from TMG1 for those who want to access the Internet. How can I go about doing this. I can achieve this by adding the TMG2 manually on TMG Clients but I prefer to do this automatically. Is
there a way to publish TMG2 in WPAD while TMG1 is already there? Dont forget we only have the luxury of using two TMG
Standard servers. :(
Thank you.

Hi,
You can consider to configure the Forefront TMG Arrays or NLB.
Planning for Forefront TMG server high availability and scalability
http://technet.microsoft.com/en-us/library/dd897010.aspx
Thanks.
Jeremy Wu
TechNet Community Support

Anyone know how to use airport express to bring internet to a powermac G5 model power PC G5 using airport express?

I bought an airport express and was told that I can configure it, and then move it to the G5 and connect it with the ethernet cable giving the G5 access to the network. But the laptop I first configure it to loses the connection once I remove the ethernet cable between the airport express and the modem. When I connect the G5 to the airport express nothing happens. Any ideas?

Hello Ed,
Is this how you set it up?
http://www.apple.com/airport-express/
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

How to use javafx in web page written in jsp or jsf

Hello
How can we include our demo of javafx, that come with netbeans IDE , into my web page in JSP or JSF.
Regards
Rajnish Chauhan

You just have to add it like and applet , including this line in your JSP or JSF
<script src="http://dl.javafx.com/dtfx.js"></script>Then add the applet
<script>
    javafx(
              archive: "./resources/jar/Draw.jar",
              width: 400,
              height: 200,
              code: "Draw",
              name: "Draw"
</script>./resources/jar/Draw.jar - is the path and the name of the jar

How to use JavaFX Scene Builder 1.1 build b29 in Eclipse

I would like to use Scene Builder to generate FXML with corresponding handlers and then use other technologies to implement the handlers. I have looked at jfxeclipse and it was not suitable. The Scene Builder team has done a great job with the easy layout and the terse xml. Any information would be appreciated. The support in Netbeans is very good but I can't use that IDE at this time.

By jfxeclipse, do you mean e(fx)clipse? You can create a new FXML file directly in there (File -> New -> Other... -> JavaFX -> New FXML document). You can right click on that file and choose "Open with Scene Builder". It will open it in Scene Builder (whatever version you have installed), let you edit it there, and then update it in Eclipse when you save. Not quite using Scene Builder as a plugin, but just as convenient.

How To use a wireless in Satellite L305-S5968

I just recently purchased a Toshiba Satellite L305-S5968 and I've never used or been able to set up a wireless PC.
How exactly can I use this PC to be wireless so I can login for free at the local library.
My wireless network card is this one: Realtek RTL8187B Wireless 802.11g 54Mbps USB 2.0 Network Adapter.
I have the LAN working just fine but I'm afraid that the library does not have LAN plugins there.
What all do I need and what do I need to do to make this work.
I need step by step instructions on this please do not post vague answers.
I'm not a PC idiot, but I have never set this up before so this is new for me.
EDIT: Sorry I realize this may help...
I'm running Windows XP SP2 on here I believe.
I have my own disk i installed it with. I'll also be installing the wireless driver becasue apparently its missing as well.
Thanks

Hi,
Im a little bit confused about your posting. What you want to know exactly?
I mean you can WLAN instead of LAN without problems. Its the same just without cable. You have only to check the TCP/IP settings on your computer that is also depending on the router and type in the right password from the router Thats all!
Furthermore I have founded an interesting document:
[How to use a Wireless LAN Access Area for easy connection with Toshiba ConfigFree?|http://aps2.toshiba-tro.de/kb0/HTD9202JI0000R01.htm]

How to use Preloader with stand-alone application in Eclipse? Thank you.

My IDE is eclipse and my project is a stand-alone application(pure CS architecture with OSGI framework).
How to use Preloader thus the preloader would be started before my main Application and hid later?
I found some code in http://docs.oracle.com/javafx/2/deployment/preloaders.htm#BABGGDJG
but I still don't know how to deploy the Preloader with my startup Application in OSGI framework.
I give some code of my startup application below:
public class MyPrjMain extends Application
    private static Stage primaryStage;
     public void start(final Stage stage)
        throws BusinessException
        primaryStage = stage;
        init(primaryStage);
        primaryStage.show();
}Thanks very much, everybody.
Edited by: Slash Wang on 2013-2-27 下午5:36

Your question has already been answered on StackOverflow:
http://stackoverflow.com/questions/15126210/how-to-use-javafx-preloader-with-stand-alone-application-in-eclipse/15148611

How to Enable Wake On Lan over the Internet??

Hi, I am using RV220W with the latest firmware, I want to make "Wake on LAN" work for my NAS, I found the following description on Internet:
"If you wish to use Wake On Lan over the internet you will need to set up your destination firewall/router to allow "Subnet Directed Broadcasts". Most routers and firewalls disable this option by default.
You will then need to allow traffic through on your firewall/router on a specific port. The choice of ports is up to you."
So how can I enable "Subnet Directed Broadcasts" on RV220W??
Thanks.
Raymond

Hi Jasbryan,
If RV220W doesn't forward UDP to a broadcast address, could you ( i.e. Cisco) provide a tools for sending WOL Magic Packet to the LAN on Router Device Manager page?
I see many routers also provide this tools from their manager page.
Thanks.
Raymond

How to use time capsule for wireless back-up but not internet?

Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

Using separate ethernet ports for LAN and internet

Following scenario:
A couple of Lion clients and a Lion server connected to a switch. Switch connected to router for internet access. All devices, clients, server and router are in the same C-Class net.
I'd like to connect the Lion server with 2 ethernet ports to the switch, so that one port is solely used for connections to the Lion clients (aka LAN) and the other port is solely used for connections to the internet. That way heavy LAN traffic to/from the server cannot bog down internet access to the server. Any ideas how to acomplish that?
Usually you would configure the Lion server as a router and connect the Lion clients (via a switch) to one port and the cable modem to the other, so both ports are in different subnets. But I don't want all internet traffic from the clients going through the Lion server.
The best I've come up so far was to configure both ethernet ports with static IP addresses. The one connecting to the clients with a 255.255.255.0 netmask but no router IP given. The one for internet with a 255.255.255.255 netmask and the router IP set to my physical router IP. It seems to work, but I'm not sure, whether this is the suggested way to do such a setup.
Maybe some manual editing of the routing table is are more solid solution?
Any tips appreciated.
Pete

What you want to do can be done but maybe not the way you are trying.
First yes, you would use two Etherner ports on the Mac, if it is a Mac Pro or XServe it has two built-in, other Mac models can do this using a USB Ethernet interface.
Next, the way I would normally do this is to have a separate switch for the WAN router, this would make the setup look like the following
LAN Switch ----- Server ------------ Router --- Internet
       | |                             |
       | |                            NAT
       | +-----------------------------+
       |
       +------ Client Devices
The router could be doing NAT via one interface, or a separate Firewall box could do the NAT.
Another possible way would involve segmenting the lan switch by setting up a VLAN and putting one port for the Servers second Ethernet connection on to that VLAN (using public IP addresses and the a connection to the router on that VLAN, the LAN switch could then route between the two VLANs. Cheaper LAN switches do not have this ability.

Configure internet connection - how to use compute...

Hi All,
Just received a new Nokia phone with GPS and installed OVI suite.
I tried to figure out how to use my computer inter setting to get content for my phone (maps etc..).
The OVI suite doesn't detect my internet connection used on my computer but always tries to connect using my phone.
There exists the manual option but I don't know which setting to fill in: "access point", "user name" and password.
These seems like a very simple thing, but I didn't figure it out.
On my computer I have a LAN connection and wireless connection. Don't know why OVI suite doesn't detect these automatically.
Thanks for any suggestions.
Bart
ps: I already learned from my internet searches that OVI suite is no fun to use.

For any content other than Maps.. Download it on to your PC.. Then connect the phone to install it... For Maps... connect your phone to PC using the USB cable (PC Suite Mode).. Launch OVI Suite and go to Maps in its Menu. After some time the Phone will set up and when the OVI Suite connects to the Maps server you will see the list of countries.. Select the Maps you want and follow instruction on the screen.. It will be downloaded and installed on the phone in due time. It will not use the Phone internet but the PC's internet connection...
BTW which phone do you have ?
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

How to download a file from the internet using terminal

how to download a file from the internet using terminal
does any one know how to download afile from the internet using the Terminal application?

Use curl. Something like this:
curl -O http://www.example.com/filename.zip
For more info, type +man curl+.

How to use JavaFX in LAN, No internet

Similar Messages

Maybe you are looking for