How to use KDE services without KDE?

I am actually playing around with a very interesting FVWM configuration, I found in the FVWM forum, but not using KDE, there is always something missing, like kmilo & klaptopdaemon or the KThinkBat panel applet (which is the only one using smapi for reading battery status).
I was wondering, if there is a way to start all of the usual KDE services without actually starting KDE as a DE, so I mean about everything that usually runs in the background, without kwin & the konqueror instance controlling the desktop icons and middle/right-click menus.
When I am in FVWM, I can use all installed KDE programs without problem (they even make use of stalontray as a replacement for the KDE systray), KDE on-demand-services (like KWallet) are started automatically when a program needs them, but I have no idea how to automatically start the KDE services, which normally get started when KDE starts (like kmilo). In case of kmilo, I can start it manually using the KDE control center, but of course I don't want to do that every time after I start FVWM.
Just replacing kwin with FVWM using "export KDEWM" did not work, it got pretty much messed up with a mix of FVWM & KDE (which maybe could have been fixed by killing some KDE processes, but I didn't try, because it didn't seem the be the best approach).
Anybody any idea? Anybody knows the command, how to start all the KDE services, which usually get started when KDE starts?

That's the strange thing, kdeinit doesn't do it, I already tried before (by just starting it after FVWM has come up), and I tested it again by adding it to .xinitrc:
$ cat .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
kdeinit &
exec fvwm
But all it does, is the following:
4478 ? Ss 0:00 kdeinit Running...
4484 ? S 0:00 \_ klauncher [kdeinit]
4482 ? S 0:00 dcopserver [kdeinit] --nosid
4493 ? S 0:00 kded [kdeinit]
Looking into the KDE Control Center shows, that only 1 out of 11 services, which should have been started on KDE start, is actually running.
kdeinit may be the way to go, but there is still something missing. But what?

Similar Messages

How to use Enterprise Services without ESR.

Hello,
We use SAP ERP6.0.
We would like to use SAP Enterprise Services as a evaluation by .NET application.
We do not have SAP NetWeaver PI and CE now.
Without ESR (PI and CE) , how do I configure ERP 6.0 to use Enterprise Services?
Please let me know.
Best regards,
Koji Nagai

Hi,
ESR is not compulsory for just consuming service.
First you need to activate and configure webservice.
Step1: Goto transaction SICF and activate service you want to evaluate. You can find ES under path: /default_host/sap/bc/srt/xip/sap/
Step 2:Goto transaction: SOAMANAGER and under tab: Application and Scenario communication chose single service administration. Now search for "Service" pattern: service name you selected and activated in SICF field = Internal name. then go.
Step 3: you will be able to see your service here, now select service and click on apply selection.
Step 4: Under the "configuration" tab select "Create service" button. Give any name to "New Service Name" type some description and finally give any name to "New Service Name" and apply setting.
Step 5: Select authentication type http and save,
Now under tab "Overview" you can see some url for "Open WSDL document for selected binding" use this url in your .Net application.
Regards,
Gourav
Ps: I always have ESR and all necessary configuration so don't know if required settings available in your system to work this scenario.

Use of Services without SR and ESR

Hello, for this one I need to explain something:
I'm writing my diploma about ESOA. Because of this I allready have created a application which uses Enterprise Services. But because I used the ESWorkplace I've had some restrictions.
- If I used the SR of the ESWorkplace together with a in my CE generated Destination I could not use the Services because the SR gave me the SAP internal URL to the service(iwdf...) which I could not reach. I solved this problem the following way:
- Get the Service-WSDL-Url from the ESWorkplace
- Create a WSDL Destination in the CE with the WSDL-URL from above and the System-Data of HU2
- Use this Destination in WD Java for an adaptive Web Service Model and again the WSDL-URL
With these steps I was able to use the Services. But I had to create a destination for every single Webservice. It's ok, it worked and this was everything I wanted. But as a result of this I haven't used the ESR and the SR at all. Because all i needed was the WSDL-Url of the service and the system data of the corresponding System.
Now the question comes up: In case of a ERP System with installed Enhancement Packs without an SR or ESR: Would I be able to use the Services in the same way? I mean: in /wsadmin on HU2 I'm able to get the wsdl-Url. But could this information also be found there without a SR or ESR?
I have tried to use the services of a CRM 2007 System (which has preinstalled services as CustomerQuoteByID) we physically have here in our company. But I simply don't get the needed WSDL-URL. In fact the Service can't be found in /wsadmin. Is this because of the missing SR and ESR? Or am I doing something wrong?
I really don't get the neccessarity of the SR and ESR at all. Ok, I know what I can do with them. Modelling Services with the ESR or using them if I don't have a supplier. And Browsing available Services in the SR. But if a customer has no CE or PI and because of this no SR and ESR: Would there be a way for using his services. Don't get me wrong: I know how to use bapis and rfcs, and I also know the the ES only use the BAPIs with an additional Interface with some extra functionality like failure and exception handling. But how to use these ES without the ESR and SR?
I hope you understand my question. I would be very happy about an reply!
Geetings, Marco

Hello!
I'm trying to use a ResourceBundle to store properties
that arn't locale-specific - its a sort of
look-and-feel type arrangement. The way more specific
ResourceBundles inherit properties from more general
ones would be really useful, but since its not a
locale that's used to pick a particular bundle I'm
having trouble working out how I can use it for this
purpose.
Has anybody used ResourceBundles for non-locale
specific uses before, or does anyone know of anything
else that might be more appropriate?
Thanks loads for any help!!
NicolaYes, you make up your own Locales with anything you want in place of the language, country, and variant. As long as you're not setting the Locale, it works great!
ResourceBundle laf = new ResourceBundle.getBundle("skins.properties", new Locale("flavor", "chocolate",""));will get all resources in skins.properties and over-riding entries from skins_flavor_chocolate.properties".

How to use web services in Excelsius 2008

I am new to this tool. I have trial version on excelsius 2008 and i would like to build a dashboard that should query our corporate database (in oracle). I think web services is a option to do it. Any samples available?.Please help me
Edited by: AshishDatar on Jul 27, 2009 6:29 PM

Hi AshishDatar:
For you question you want to get data from data base using web service connection. Here I can give you some suggestions
1.Write a web service to retrieve data from data base, then use Xcelsius u201Cweb service connectionu201D under u201CManage Connectionu201D section to consume the service and get the data from data base to spread sheet.
2.Xcelsius also provide you a tool to generate web service with easy way (without coding). (Suggested)
Using flynet, you can get flynet installation file under Xcelsius installation folder u201CXcelsius\Connectivity\Flynet Webservice Generatoru201D for more information about flynet please refer to
http://myxcelsius.com/2008/11/07/generating-web-services-for-xcelsius-using-flynet-web-service-generator/
Here is also a demo on how to use web service conneciton with Xcelsius + Flynet
https://businessobjects.webex.com/ec0600l/eventcenter/enroll/register.do?siteurl=businessobjects&formId=50213992&confId=50213992&formType=1&loadFlag=1&eventType=1&accessType=
Hope it helps with your work! And let me know if you need any further help.
Thanks!
Bill
Edited by: Bill Xu on Jul 28, 2009 8:02 AM

Use Enterprise Services without service registry?

Hello experts,
this question is following me since days: is it possible to use enterprise services from an erp-system without a service registry?
From my understanding the service registry at runtime determines the endpoint where the service is implemented. But when there is just a single erp-system is it then possible to use this services without any additional systems?
Thanks for any answer.
Regards,
Norbert

Yes you can.
The service registry is just a "phone book" of services. as much as phone numbers exist well without the phone book services exist without a registry.
actually, if you really ever have only one source system for enterprise (or other) services you don't need the service registry. even if you have 3 source systems and you know how to find an overview of the services in each of those 3 systems and if you don't use a 'global' data model you do not really need the service registry.
but this is just my 2 cents. 'publishing' seems to be a common source of joy these days
anton

IDOC - PO Creation using a service without master record

I can not find the field to populate the cost center when i create a PO using a service without master data (buy using Material Group) via transaction WE19.
The accounting information is present on "E1BPMEPOACCOUNT" segment, but the cost center and G/L Account in this segment were not recognized by IDOC because this segment is used to populate Account Assignment tab on Item Detail Level and my problem appear one step before when after I populate the service tab at Item Detail Level and press .
In few words I didn´t find the correct field to populate the cost center on Basic type "PORDCR101".
I tried populate the field COSTCENTER on the segment "E1BPMEPOACCOUNT" but didn´t work.
Maybe is there another basic type to use in this specific case?
Thanks a lot.
Kind Regards,

Hi,
In the inbound side create a new entry in WE57 tcode.. with the functio mdoule as "IDOC_INPUT_ORDERS", basic type "ORDERS05", extn< specify the extn u created at outbound side>, message type "ORDERS". Now see if it is working.
Regards,
Nagaraj

How to use Web services in BI 7?

HI all,
Can anyone pls let me know how to use Web services in BI
Thanks
Pooja

http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d029e74911d6b2e400508b6b8a93/content.htm

Use SAP service without XI/PI? Need answer for mgmnt mtg in 30 min

Trying to read SDN info in last hour, but can't see definitely that a SAP web service can be available for external appl... without using SAP PI (which we've not used). All diagrams/text seem to indicate XI/PI as dependent component.

I believe you could still configure direct/point-to-point communication without using XI/PI. Web Services/Enterprise Services can be provided/consumed from an SAP system using ABAP proxies, configuring logical ports, SOAMANAGER. But XI/PI is useful in mediated scenarios and has an option to guarantee Reliable Messaging. Below is one link I bookmarked during some research around eSOA from long time back, may be it might be helpful to you. Also, I am pretty sure you can do Synchronous web services/Enterprise Services without using XI/PI (i.e. point-to-point communication) but not sure if you can use Asynchronous services without XI/PI.
http://help.sap.com/esoa_docu_print/crm/51/Docu_ES_CRM_51SP03_EN.pdf

How i use Enterprise Services?

Hello @ll experts,
i hope that is the right Forum-Category.
I don't find any description, how is use Enterprise Services with SAP PI for my IT-Scenario.
Actual situation:
I import the XI-Content (there is the Service Interface to use for the ES) in the Enterprise Service Repository (SAP PI 7.1), copied the Service Interfaces and all dependence Objects in my own Software-Compoment.
My Question:
What i should doing to config in my sap ERP ECC 6.0 with the Enterprise Service to connect with SAP PI 7.1?
Maybe ABAP-Proxies?
Thanks in Advance,
best regards
armin

Hello,
Once you build Service Interface in PI, you need to generate PROXY in back end ERP system using SPROXY. After that you need to implement the Proxy Class Method by writing glue code using SE80. Now, you may setup End Point using SOAMANAGER. Please see the link for details: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60cb2b4c-af72-2b10-a3a2-a2f718d2a565]
Thanks,
Venu

How to use web service consumer as a source to connect to Salesforce?

I see a lot of articles and mapping xmls on how to use web service consumer but as a newbie I am not able to view the object schema from my salesforce enterprise WSDL after importing it in Informatica designer as a source. My enterprise wsdl has operations like create, retrieve, upsert, delete etc so if I want to read data from account then could someone guide me on how to use the web service consumer to view the fields after importing the wsdl. After importing the wsdl and selecting the operation say create, the columns (ports) displayed shows different groups but it doesn't list the object fields? what am I missing here? And what is the operation to read data from Salesforce is it "retrieve" from the entripse wsdl? As a newbie on this, I appreciate any inputs on this topic.

Magazinweg 7Taucherstraße 10Taucherstraße 10Av. Copacabana, 267Strada Provinciale 124Fauntleroy CircusAv. dos Lusíadas, 23Rua da Panificadora, 12Av. Inês de Castro, 414Avda. Azteca 123 I have the source table like this and i want to replace the character and sum up the numbers and how can i do it, I replace the character by reg_replace() function but I am not able to add the number because it is of not fixed length. My Output should be,71115705396

How to use spell checker without mouse?

Hi,
how to use spell checker without mouse?
And how to quickly change between languages related to documents, and be able to quickly get back to the main language setting that should be the default for the system?

And how to quickly change between languages related to documents
If you are talking about input keyboards, this is controlled by shortcuts that are explained at the top right of system prefs/language & text/input sources.

HT4995 Internationally using Location Services without having data charges. What settings should use on my iPhone 5?

I'm traveling to Europe and I want to use Location Services without having data charges. What settings should use on my iPhone 5? I want to be able to use Trip Advisor City Guides Application to tour around cities for free. I have a Verizon International Plan for my trip, but it is still pricey. I would like to keep my iPhone cell services on for incoming calls, but I want to prevent international data charges. Thanks for your help!

You don't "choose" to use th 3g network.
If you have paid for it in your plan and 3g coverage is available, your phone will automatically use it when necessary.
3g provides faster internet speeds than 2g, so you can watch video or download stuff faster. Wifi is normally faster than 3g.
Your iphone gps is "assisted", meaning it uses network data to calculate your position.
Also, you would still need the network to download maps, directions etc as they are not on your device.

How to Use Discoverer Desktop without Database User ?

Hi,
I am new to Discoverer Desktop,
How to Use Discoverer Desktop without Database User ?
Suresh

You'll need to have access to some sort of database account to use the tool. If you just loaded the tool onto a machine, Disco is not going to be useful - you need to create an end user layer, and business areas.
I suggest you start here:
www.oracle.com/technology/documentation/bi.html

HOw to use aap store without card

Hi how to use app store without card

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

How to use Enterprises Services Bundles In PI Services Registry

Hi All,
i need information regarding How to use Enterprises Services Bundles In PI Services Registry.
please provide some information. please help me..
regards,
jas
Edited by: jasmines123456789 on Nov 10, 2009 2:42 PM

Hi,
Enterprise Services (ES) bundles are collections of enterprise services, grouped by common business scenarios, which enable customers, partners and independent software developers to extend the functionality of the SAP Business Suite.ES bundles help create composite applications using SAP NetWeaver's enterprise services development and modeling tools. In this way, SAP is promoting an evolutionary path to SOA and lowering barriers to overall SOA adoption.
SAP providing bundles of enterprises for evry industry,if you want to use any enterprise services then you have to read teh documentation for the servcies and how this service can help you to reuse,if you want to provided any extension for the same you can.
All enterprise services stored in Service Registry,first you have to consume the services fromService Regsitry.Service Registry is the place holders where servies available.
refer below link how to use Enterprise Service BundleS
https://wiki.sdn.sap.com/wiki/display/ESpackages/Opportunity+Management
Regards,
Raj

How to use KDE services without KDE?

Similar Messages

Maybe you are looking for