How to use Kontakt 2 Multi output in LP8

I have seen the LP8 Manual page 214.But I found there only channel 1 can sound.otheres channel all can not sound!
why?>?

First you have to assign Kontakt as a Multi-out plug in, Logic gives you various options when choosing the plug from the dropdown menue. Then you have to assign the outputs within Kontakt first. Each group of a multisample can be assigned to Output 1-16 but you have to do a configuration of Kontakt's outputs first (click on the output button in Kontakt, a mixer opens and you do your configuring there). You can of course also use Kontakt in multitimbral mode to load different full range sounds and assign them to Midichannel 1-16. For this purpose create a Multi Instrument in your environment first - command+8, by default the "Mixer" opens->New->Multi Instrument->select the channels you want to use by clicking into the dashed numbers, the dashes dissappear->name it (e.g. Kontakt multi out) and assign an icon if you want->draw a cable to the Channel Strip where Kontakt is inserted as a Software Instrument, set the Midi channel of Kontakt to "all". In your Arrange window you can now create new tracks assigned to your new multi Instrument.

Similar Messages

How to use Oracle refcursor dataset output parameter from SP

Can I request for help on how to use Oracle Output parameter from a stored procedure as a source. I need the output tobe stored in a flat file
Thanks
Abhijit
Message was edited by:
Abhijit77

yes I would like to use it for ODI.. I would like the ouput of the refcursor to be fed to a text file using ODI. How to handle the records returned by the refcursor and map with txt file.

Smartforms - how to use page URL like output option ?

Hello,
in the smartofms output options, there's the possibility to set
BSP Page/URL: ......
and Output format: XSF output + HTML.
My requisite is to send a form in XML via web service, can I use it ? How is run ?
tks.

Hello
Use the function module "FB_CONVERT_FORM_TO_XML" to convert the smartform to XML format table.
The function module has been used in the method "GET_SMART_FORM_AS_XML" of the class .
THanks ,
M.Naveen Kumar

How to use variant for diffrent output?

Hi,
I have created one report with ALV_grid_display.
when i execute this report it would show output with less detail.
I have a one checkbox at selection-screen also. My requirement is when i select this checkbox then report should show output with more detail i.e different output.
I have heared we can create variant for this.
Pls tell me how can i do this.
Correct answear will be rewarded by maximum points.
Thanks & Regards,
Gaurav.

Hi Gaurav,
leave ur id i will send u the screen shot how to create the variant after getting the output list.
This is the sample programe
just go through the bold one in the coding and do modifications in ur programe,
REPORT ZVRI4E04 LINE-SIZE 250 NO STANDARD PAGE HEADING
 MESSAGE-ID MSG.
TYPE-POOLS : SLIS.
 TABLES DECLARATION *
TABLES: VBRK, VBRP, VBKD, KONV, KNA1.
 V A R I A B L E S *
DATA : W_FIELD TYPE SLIS_FIELDCAT_ALV.
DATA : F_FIELD TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA : V_POS TYPE I,
 LS_SORT TYPE SLIS_T_SORTINFO_ALV,
 W_SORT TYPE SLIS_SORTINFO_ALV.
DATA : IS_VARIANT LIKE DISVARIANT.
IS_VARIANT-REPORT = SY-CPROG.
DATA : BEGIN OF T_VBRK OCCURS 0,
 VBELN LIKE VBRK-VBELN,
 FKDAT LIKE VBRK-FKDAT,
 KNUMV LIKE VBRK-KNUMV,
 KUNAG LIKE VBRK-KUNAG,
 VKORG LIKE VBRK-VKORG,
 VTWEG LIKE VBRK-VTWEG,
 SPART LIKE VBRK-SPART,
 END OF T_VBRK.
DATA : BEGIN OF T_VBRP OCCURS 0,
 VBELN LIKE VBRP-VBELN,
 POSNR LIKE VBRP-POSNR,
 FKIMG LIKE VBRP-FKIMG,
 NTGEW LIKE VBRP-NTGEW,
 BRGEW LIKE VBRP-BRGEW,
 VOLUM LIKE VBRP-VOLUM,
 AUBEL LIKE VBRP-AUBEL,
 END OF T_VBRP.
DATA : BEGIN OF T_VBKD OCCURS 0,
 VBELN LIKE VBKD-VBELN,
 BSTKD LIKE VBKD-BSTKD,
 END OF T_VBKD.
DATA : BEGIN OF T_KONV OCCURS 0,
 KNUMV LIKE KONV-KNUMV,
 KPOSN LIKE KONV-KPOSN,
 STUNR LIKE KONV-STUNR,
 KSCHL LIKE KONV-KSCHL,
 KBETR LIKE KONV-KBETR,
 KWERT LIKE KONV-KWERT,
 END OF T_KONV.
DATA : BEGIN OF T_KNA1 OCCURS 0,
 KUNNR LIKE KNA1-KUNNR,
 NAME1 LIKE KNA1-NAME1,
 END OF T_KNA1.
DATA : BEGIN OF T_FINAL OCCURS 0,
 VKORG LIKE VBRK-VKORG,
 VTWEG LIKE VBRK-VTWEG,
 SPART LIKE VBRK-SPART,
 FKDAT LIKE VBRK-FKDAT,
 VBELN LIKE VBRK-VBELN,
 POSNR LIKE VBRP-POSNR,
 NAME1 LIKE KNA1-NAME1,
 BSTKD LIKE VBKD-BSTKD,
 FKIMG LIKE VBRP-FKIMG,
 NTGEW LIKE VBRP-NTGEW,
 BRGEW LIKE VBRP-BRGEW,
 VOLUM LIKE VBRP-VOLUM,
 BASIC LIKE KONV-KWERT,
 EXDUTY LIKE KONV-KWERT,
 ED LIKE KONV-KWERT,
 CST LIKE KONV-KWERT,
 VAT LIKE KONV-KWERT,
 SALTAX LIKE KONV-KWERT,
 FREIGHT LIKE KONV-KWERT,
 TCS LIKE KONV-KWERT,
 SRG LIKE KONV-KWERT,
 RATE LIKE KONV-KBETR,
 END OF T_FINAL.
 S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS: S_KUNAG FOR T_VBRK-KUNAG,
 S_FKDAT FOR T_VBRK-FKDAT,
 S_VKORG FOR T_VBRK-VKORG,
 S_VTWEG FOR T_VBRK-VTWEG,
 S_SPART FOR T_VBRK-SPART.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN .
SELECT SINGLE KUNAG FKDAT VKORG VTWEG SPART FROM VBRK INTO T_VBRK
 WHERE KUNAG IN S_KUNAG
 AND FKDAT IN S_FKDAT
 AND VKORG IN S_VKORG
 AND VTWEG IN S_VTWEG
 AND SPART IN S_SPART.
IF SY-SUBRC <> 0.
 MESSAGE E000 WITH 'THERE IS NO RECORDS FOR THIS SELECTION CRITERIA'.
ENDIF.
START-OF-SELECTION.
SELECT VBELN FKDAT KNUMV KUNAG VKORG VTWEG SPART
 FROM VBRK INTO TABLE T_VBRK
 WHERE KUNAG IN S_KUNAG
 AND FKDAT IN S_FKDAT
 AND VKORG IN S_VKORG
 AND VTWEG IN S_VTWEG
 AND SPART IN S_SPART.
IF NOT T_VBRK[] IS INITIAL.
 SELECT VBELN POSNR FKIMG NTGEW BRGEW VOLUM AUBEL
 FROM VBRP INTO TABLE T_VBRP
 FOR ALL ENTRIES IN T_VBRK
 WHERE VBELN = T_VBRK-VBELN.
ENDIF.
IF NOT T_VBRP[] IS INITIAL .
 SELECT VBELN BSTKD FROM VBKD
 INTO TABLE T_VBKD
 FOR ALL ENTRIES IN T_VBRP
 WHERE VBELN = T_VBRP-AUBEL.
ENDIF.
IF NOT T_VBRK[] IS INITIAL.
 SELECT KNUMV KPOSN STUNR KSCHL KBETR KWERT
 FROM KONV
 INTO TABLE T_KONV
 FOR ALL ENTRIES IN T_VBRK
 WHERE KNUMV = T_VBRK-KNUMV.
ENDIF.
IF NOT T_VBRK[] IS INITIAL.
 SELECT KUNNR NAME1 FROM KNA1 INTO TABLE T_KNA1
 FOR ALL ENTRIES IN T_VBRK
 WHERE KUNNR = T_VBRK-KUNAG.
ENDIF.
 Populating the final data *
LOOP AT T_VBRP.
 READ TABLE T_VBRK WITH KEY VBELN = T_VBRP-VBELN.
 READ TABLE T_VBKD WITH KEY VBELN = T_VBRP-AUBEL.
 READ TABLE T_KNA1 WITH KEY KUNNR = T_VBRK-KUNAG.
 T_FINAL-VKORG = T_VBRK-VKORG.
 T_FINAL-VTWEG = T_VBRK-VTWEG.
 T_FINAL-SPART = T_VBRK-SPART.
 T_FINAL-FKDAT = T_VBRK-FKDAT.
 T_FINAL-VBELN = T_VBRK-VBELN.
 T_FINAL-POSNR = T_VBRP-POSNR.
 T_FINAL-NAME1 = T_KNA1-NAME1.
 T_FINAL-BSTKD = T_VBKD-BSTKD.
 T_FINAL-FKIMG = T_VBRP-FKIMG.
 T_FINAL-NTGEW = T_VBRP-NTGEW.
 T_FINAL-BRGEW = T_VBRP-BRGEW.
 T_FINAL-VOLUM = T_VBRP-VOLUM.
 LOOP AT T_KONV WHERE KNUMV = T_VBRK-KNUMV AND
 KPOSN = T_VBRP-POSNR.
 IF T_KONV-KSCHL = 'ZIBP' OR T_KONV-KSCHL = 'ZIPR'.
 T_FINAL-BASIC = T_FINAL-BASIC + T_KONV-KWERT.
 IF NOT T_KONV-KBETR IS INITIAL.
 T_FINAL-RATE = T_KONV-KBETR.
 ENDIF.
 ENDIF.
 IF T_KONV-KSCHL = 'ZIED'.
 T_FINAL-EXDUTY = T_FINAL-EXDUTY + T_KONV-KWERT.
 ENDIF.
 IF T_KONV-KSCHL = 'ZIEC'.
 T_FINAL-ED = T_FINAL-ED + T_KONV-KWERT.
 ENDIF.
 IF T_KONV-KSCHL = 'ZIVA'.
 T_FINAL-SALTAX = T_FINAL-SALTAX + T_KONV-KWERT.
 ENDIF.
 IF T_KONV-KSCHL = 'ZIFD' OR T_KONV-KSCHL = 'ZID0'.
 T_FINAL-FREIGHT = T_FINAL-FREIGHT + T_KONV-KWERT.
 ENDIF.
 IF T_KONV-KSCHL = 'ZITC'.
 T_FINAL-TCS = T_FINAL-TCS + T_KONV-KWERT.
 ENDIF.
 IF T_KONV-KSCHL = 'ZITS'.
 T_FINAL-SRG = T_FINAL-SRG + T_KONV-KWERT.
 ENDIF.
 IF T_KONV-KSCHL = 'ZICS'.
 T_FINAL-CST = T_FINAL-CST + T_KONV-KWERT.
 ENDIF.
 IF T_KONV-KSCHL = 'ZIVA'.
 T_FINAL-VAT = T_FINAL-VAT + T_KONV-KWERT.
 ENDIF.
 ENDLOOP.
 APPEND T_FINAL.
 CLEAR T_FINAL.
 CLEAR T_KONV.
 CLEAR : T_VBRK, T_VBRP, T_VBKD, T_KNA1.
ENDLOOP.
 POSITION DECLARATION FOR ALV OUTPUT *
V_POS = 0.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'VKORG' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-SELTEXT_M = 'SORG'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'VTWEG' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-SELTEXT_M = 'DCHL'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'SPART' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-SELTEXT_M = 'DVS'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'FKDAT' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-SELTEXT_M = 'Date'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'VBELN' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-SELTEXT_M = 'Inv No'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'POSNR' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-SELTEXT_M = 'Item No'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'NAME1' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-SELTEXT_M = 'Name'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'BSTKD' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-SELTEXT_M = 'PO No'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'FKIMG' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'Quantity'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'NTGEW' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'NT WG'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'BRGEW' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'GR WG'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'VOLUM' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'Volume'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'RATE'.
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'Rate'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'BASIC'.
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'BASIC'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'EXDUTY'.
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'EX Duty'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'ED' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'EDUCATION'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'SALTAX'.
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'SALTAX'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'CST'.
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'CST'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'VAT'.
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'VAT'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'FREIGHT' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'FREIGHT'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'TCS' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'TCS'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
V_POS = V_POS + 1.
W_FIELD-COL_POS = V_POS.
W_FIELD-FIELDNAME = 'SRG' .
W_FIELD-TABNAME = 'T_FINAL'.
W_FIELD-DO_SUM = 'X'.
W_FIELD-SELTEXT_M = 'SRG'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-CPROG
 I_STRUCTURE_NAME
 IS_LAYOUT = WA_LAYOUT
 IT_FIELDCAT = F_FIELD
 IS_VARIANT = IS_VARIANT
 I_SAVE = 'X'
 IT_SORT = LS_SORT
 TABLES
 T_OUTTAB = T_FINAL
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward points if helpful
Thanks
Message was edited by:
 Pattan Naveen

How to use opentype font in output designer

I have to use Kaufmannstd.otf font for my document but I am not able to add that in Presentment target. Any Idea?

The presentment target will dictate what fonts can or cannot be used. Type 1 fonts (such as open type) are typically available in a postscript presentment target. If you are set for pdf, the fonts will only show up in the font setup if they are in fact embeddable. Perhaps the Kaufmannstd font is not an embeddable font.

How to use "Referenced Output"

Dear Sir/Madam,
I find the concept "Referenced Output" in the GSM user guide， How to use or set Referenced output in formulation?
Thanks
Terry

You can also "graduate" an external output material to a referenced product. From the External Product Material specification, look under the Material Attributes section, you should see the Output Type property with a "graduation cap" next to it (you made need specific role membership, the Oracle docs would have the specifics for this). Clicking the cap icon will change the output type from external to your choice of Referenced - Product, By-Product or waste. Saving the spec will change the output type, but be aware that changing to a referenced output type severs the theoretical roll up link with the original formulation (nutrients will no longer be rolled up from the formulation, nor will breakdowns and compliance information, etc.)

Kontakt 3 as a Multi-midi instrument? How? Multi-outputs?

I am having trouble getting Kontakt to work properly as a mutlii-output instrument with multi-midi inputs.
There are instructions in the manual and online but I seem to have some problems.
I create an Instrument track of Kontakt 3. I select 16 stereo output mode.
I open Kontakt 3 and create new mixer tracks to match the 16 stereo.
Problem 1: I cannot rename these new tracks.
Problem 2: I cannot assign outputs that seem correct. I look at config. on the mixer channel and I get "unassigned" or "plug-in output 9, 10..."
I go to the Logic Mixer and hit the + on the Konotakt Instrument Track and create new AUX tracks alongside the Instrument Track but this does not seem to help.
I really can't figure how to make the midi multi instrument in Logic such that I can send different midi channels to multiple instruments in Kontakt 3.
I create a multi instrument in Environment but where to I drag that cable to connect?
Sorry I am so lagging in understanding this but if there are some thngs I am missing please help.
Yes I can get a Koontakt 3 Instrument track to work and sound a single instrument but I need the multi midi and multi output option to work.
Thanks,
Dean

Beatfarm wrote:
I setup my Kontakt 3 Multiple Output Instrument in Logic Pro 8 including the Logic Aux Channels.
This way is not so good,,, (sorry don't get me wrong )
... I just talking about my personal experience with Logic Pro
I Never use Multi outs workflow in my songs
the Multi outs strategy comes from other DAWs (expacially related with ProTools) that have hystorical limited nunbers of track in the Mixer. (or you must pay a lot of "bucks" to have 200 stereo tracks in Protools)
In Logic you have over than 500 straight tracks/Audio and instruments + 64 and maybe more Aux Busses...
As you can see the buss are limited related to the number of track
My personal advice is: use buss only for reverbs, Delays, and Multi grupoed tracks... and instead to use aux for multiouts instrument use single instances...
*about Kontkt 3 and Logic Pro there are 2 different additional working strategies*
1) using single instances (this don't ask for more CPU power resource) but the Audio Units version of NI instruments are not so stable when used as multi instances...
SO: Export as Audio the allready completed orchestral parts.
Using Audio track in Logic is always a good idea because Logic Pro have 255 *Stereo Audio tracks*
2) using Kontakt 3 as Standalone allow you to use more Ram (logic stops to work with more than 2.7GB physically adressed
SO: you can use IacBus to route Midi signal direct to Kontakt 3
All of the sudden I'm not able to freeze my Kontakt Multi Instrument anymore (the other tracks still show the freeze function).
The "freeze" works only on the tracks (obviously, Freeze cannot and "will never" works on AUX/BUS) this is one of the majior reasons that makes me able to suggest you to avoid Multi Outs Instruments strategy
What can I do to get around this problem? Please help me out!
I can only add that is not a good idea to use Logic in the same way as Protools or Cubase
Logic Pro is different
you need to adapt your working in progress strategy to achieve the best result
you have more than 500 Audio and instrument tracks...
I suggest to use it...
I'm sure that you never will be able to use all 500 tracks in une song... BUT LOGIC can DO THAT!!!
I suggest to stay focused to the Logic Mixer: it is a great pieace of software thecnology... it is a REAL hardware mixer that has been ported inside the best professional Audio software...
Logic Pro is very near to a REAL HARDWARE RECORDING STUDIO Mixing consolle ENVIRONMENT! (including Cables, Inserts and AUX capabilities)
*about 600 Stereo Audio Channels and Aux/buss are ready to be used in Logic PRO to realize your songs!*
if you need more than 600 stereo tracks... feel free to ask me... I will try to find a way to solve your issue
hope this helps
Thanks
G

How to use airplay speakers in multi-output device without crackling audio?

Hi,
I would like to mirror the audio output from my mac mini to the built-in output and an airplay speaker.
Therefore I added a Multi-Output Device containing the Built-in- and Airplay output, as soon as I activate the airplay speaker the sound is mirrored but unfortunately always with a crackling sound coming of the speakers set as "slave Device"... only the Device set as "Master Device" has clear sound, doesn't matter if it's the airplay speaker or the speaker (or headphone) directly connected to the built-in output.
I've tested this with a mac mini and an mac book air as audio source, same problem. Both were running Mac OS V. 10.9.2.
Does anyone have an idea what I'm doing wrong?
Greets
Chris

I'm using a 2011 Macbook Pro running Mavericks and current Apple TV (MD199HK/A 3rd generation) when trying to output audio to both Apple TV and built-in output simultaneously I suffer crackling and popping. I have this issue once I use Audio MIDI Setup (under utilities) to create a Multi-Output Devise. Once I use this multi-output devise made up of Apple TV and Built-In Output to get my music to both output devises at once BUT I get crackling sound on either Spotify or iTunes.
I've worked around this issue by using AirParrot. I select Apple TV in AirParrot with Audio enabled. The Apple TV then takes all audio output, then I select the 'Multi-Output Devise created in 'Audio MIDI Setup' and I have playback through Apple TV and Built-In Output without any crackling or popping.
Only minor outstanding issue is that whatever scenario I then run Audio Midi Setup in terms of setting various devises as Master Clock and resampling of sub devise I can't perfect the sync between Apple TV audio output and my local Macbook Pro, but close enough with the slightest hint of echo. Plenty of forums discussing Word Clock sync which is out of my league. Un-ticking drift correction on the 'AirParrot' audio output has them close enough, depends on how easily you can hear your apple TV output from the room where your Macbook Pro is and vice versa.

The device is in use by another process - error - cannot select Multi Output Device - Mac OSX 10.8.2

Dear Adobe Users!
Please help!
I'm using Adobe Audition CS5.5 on a Mac - OSX 10.8.2 (latest version of Mountain Lion) and I'm trying to select a Multi-Output device.
This was working FINE last few days - today, I get an error. I've tried to re-install Adobe Audition and that hasn't fixed the problem. When it first started up it said it couldn't find any audio devices at all.
Please can you help? I'm getting a message saying the device is being used by another process - but it's not being used by anything else at all!
Hope you are able to help! I use the multi output device option so I can record what I can hear. I spent two days trying to sort that out after it all-of-a-sudden didn't work last Thursday.
Now just spent last two hours trying to get Adobe to recognise the Multi Output device - it's been working fine last few days!
Many thanks if you're able to help!
- Rory

Durin,
May have sussed it! It seems that Built-in output was the way to have it for Audition CS5.5 to record what I'm hearing! Yes, the multi-device needs to be used - but in another settings.
Here's how I have each section configured and it now works!
First of all, in Audition > Preferences > Audio Hardware:-
Then, on the Mac's OS - System Preferences > Sounds (input settings)
Then Output settings :-
Then Midi Settings found in Finder > Applications > Utilities > Audio MIDI set up
All now seems to be working! I'll let you know if anything further happens!
I was certain I had the output device as Multi Device Output on Adobe before, perhaps it should've been set to Built-in Audio all along. Anyway, I re-installed my Mac from Time Machine, logged in as another user and it worked under that profile, then logged back in as me - and am using the settings in the pics above and all seems to be working!
It's been a long week, perhaps I was just going around in circles and didn't actually test these particular settings yesterday in this order after all.
Thanks again for your help! Sorry if I've caused any confusion!

Using iDrum as a multi-output instrument

Hi all-
Maybe someone else uses iDrum as a drum sequencer/scratch drum instrument like me.
I can't seem to instantiate iDrum as a multi output instrument...only stereo.
I know how to do this well in PT, but it has eluded me so far in L8.
I am:
Creating a new instrument track, selectin the i/o as iDrum and there is no multi output option as there is in ultrabeat.
It is probably something simple...usually is
any help appreciated greatly!!

AFAIK, there is no multi-output support for iDrum with Logic 8, although you could select a multi-channel option in LP7.
What you can do is bounce pattern/song to separate .aiff files from the iDrum menu and reimport them on to audio tracks.

How to use multi select in a query report

I defined a lov. This lov retuns name and a id. I want to use the result of this multi select in my query.
I always get invalid number when I choose two items of the select. When I debug I see that the return value of the multi select is 1:2. How can I change the seperator : in , I tried the following but this does't work.
if :P26_PRODUCTTYPE IS NOT NULL then
l_sql := l_sql ||' and producttype in
(REPLACE(:p26_producttype,'':'','','' ))';
end if;

as you're finding, multiple values selected from html db multi-select list items (and checkboxes) are stored as a single, colon-delimited string. i explained an easy way to handle this via pl/sql in...
Multiple select list
...that post shows you how to throw the selected values into a pl/sql table and step through them as needed. it also showed how to use an instr to parse through the string if you want to go that route. you could use that same instr logic right in your sql query. so let's say your lov for your multi-select item (P1_MY_MULTISELECT, we'll call it) was defined as...
select ename, empno from emp order by 1
...and your user selected KING, FORD, and JONES. :P1_MY_MULTISELECT would store those values as...
7839:7902:7566
...you could then write a query to return the selected enames with something like...
select ename, job
from emp
where insrt (':'||:P1_MY_MULTISELECT||':',':'||empno||':') != 0
...hope this helps,
raj

How to send the ALV GRID output to spool by using the print button in std t

How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.Ramana

Hi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
 WHEN 'EXCEL'.
 PERFORM excel_download.
 WHEN 'PRI'.
 PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
 EXPORTING
 columns = 80
 device = 'ANY '
 lines = 65
 maxpenality = 1999
 TABLES
 layouts = lt_layouts1
 EXCEPTIONS
 unknown_device = 1
 OTHERS = 2.
 IF sy-subrc = 0.
 LOOP AT lt_layouts1.
 IF lt_layouts1-penality < 1000 AND
 lt_layouts1-penality < l_min_penality.
 l_layout = lt_layouts1-layout.
 l_min_penality = lt_layouts1-penality.
 ENDIF.
 ENDLOOP.
 IF NOT l_layout IS INITIAL.
 CALL FUNCTION 'GET_PRINT_PARAMETERS'
 EXPORTING
 mode = 'CURRENT'
 line_size = 80 "#EC *
 new_list_id = l_new_list_id
 no_dialog = l_no_dialog
 layout = l_layout
 IMPORTING
 out_archive_parameters = rs_arc_params
 out_parameters = rs_pri_params
 valid = l_valid
 EXCEPTIONS
 archive_info_not_found = 1
 invalid_print_params = 2
 invalid_archive_params = 3
 OTHERS = 4.
 IF sy-subrc NE 0. " INS SLIN
 ENDIF. " INS SLIN
 IF rs_pri_params-linsz LT 80 OR
 rs_pri_params-linsz LT gt_stack-s_lprint-width.
 gt_stack-print_line_break = 'X'.
 ELSE.
 CLEAR gt_stack-print_line_break.
 ENDIF.
 IF l_valid NE 'X'.
 rs_pri_params = ls_pri_params_sav.
 rs_arc_params = ls_arc_params_sav.
 ENDIF.
 ENDIF.
 ENDIF.
endform. " Print_output
 CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
 EXPORTING
 is_layout = gs_layout_cost_tot_grand
 CHANGING
 it_fieldcatalog = gt_fcat_cost_tot_grand[]
 it_outtab = gt_cost_tot_grand[].
Please check my code

How to use the Output clause for the updated statment

How to use the output clause for the below update stament,
DECLARE @MyTableVar table(
sname int NOT NULL)
update A set stat ='USED'
from (select top 1 * from #A
where stat='AVAILABLE' order by sno)A
Output inserted.sname
INTO @MyTableVar;
SELECT sname
FROM @MyTableVar;
Here am getting one error incorrect syntax near Output
i want to return the updated value from output clause

see
http://blogs.msdn.com/b/sqltips/archive/2005/06/13/output-clause.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

SSIS: How to use one Variable as Input and Output Parameter in an Execute SQL Task

Hello,
i need your help,I'm working on this issue since yesterday and have no idea how to deal with it.
As I already said in the tilte i want to start a stored procedure via a Execute SQL Task which has around 15 prameters. 10 of these should be used as input AND output value.
As an example:
i have three Variable:
var1    int        2
var2    int     100
var3    int     200
the stroed procedure:
   sp_test
     @var1 int
      @var2 int output
      @var3 int output
   AS
   BEGIN
        SET @var2 = @var2 * @var1
        SET @var3 = @var3 + @var1
   END
So in the Execute SQL Task i call the Stored Procedure as follwos:
    Exec sp_test  @var1 = ?, @var2 = ? output, @var3 = ? output
(I use an OLE DB Connection)
The parameter mapping is as follows:
User::Var1        input                   numeric              0                 -1
User::Var2        input/output         numeric              1                 -1
User::Var3        input/output         numeric              2                 -1
Now my problem. If i set  Var2 and Var3 as Input parameter the values are still the same after running the package. If i set them to a output value the are both Null because the procedure doesnt get any values.
I already tried to list them a second time - like
    User::Var2        input                  numeric              1                 -1
    User::Var2        output                 numeric              1                 -1
or i use a new variable
    User::Var2                  input                  numeric              1                 -1
    User::Var2Return        output                 numeric              1                 -1
but i alwas get the error
"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
Has anybody an idea how I can solve this problem?
Thanks a lot.
Kind Regards,
Alice

Hi Alain,
thx for your answer.
I have around 15 procedures called one after the other to calculated and modify my values. Each procedure is responsible for an other but overlapping set of variables. So i thought it would be a good idea to call them one after the other with the needed variables via a execute sql task.
So if i use a result set, how i get my stored procedure to return 10 values? I would have to use a Function instead of a procedure, wouldn't i?
As if i have 15 procedures this would be a lot of work.
But thanks a lot for the idea. I think an other idea would be to create one function which calls all stored procedures and returns all the calculated values as a result set, wouldn't it?.
Kind Regards.
Alice

How do I use DAQ Assistant to output DC on an AO?

My background includes 15 years of programming PLC's. AO's were simple. You passed the AO a value between preset ranges and it output a proportional voltage signal based on the hardware capabilities.
I foolishly thought LabView and DAQ AO's would be about the same. I built a vi to generate a DC signal which I could control the amplitude of. I also tied it to a chart to monitor how it worked. I managed to draw some very pretty ramping pictures on my chart, but when I put a DMM across the physical terminals I see no voltage.
Then I used MAX to test the channel and measured it again. Now I see voltage on my DMM. I was attempting to use the DAQ Assistant to do this. Do I need to force it to re-read the changing value I am sending it? All of the examples I find show me more primitive methods, and I could not seem to get any of them to do what I want either. I need to send a speed reference to a DC drive.
My incorrect method was to recursively add a value for ramping the signal up or subtract to ramp down. This method works perfectly on an industrial PLC. I connected a chart to the signal just as it entered the DAQ Assistant, but the only way I could check the actual was with the DMM.
Are there any examples that use the Assistant? If not then I guess I will have figure out how to use the primitives anyway.
technomage

Hello technomage,
It looks like we have discussed this problem in another thread (found here). If you have any other questions about it, please post there.
Regards,
Jesse O.
Applications Engineering
National Instruments
Jesse O. | National Instruments R&D

How to use Kontakt 2 Multi output in LP8

Similar Messages

Maybe you are looking for