How to use Labview 6i and Simulink model ????

HELLO I would like to use a simulink model written in matlab from labview
6i.
Can somebody help me?
NI says that there is a possibility but they don�t know it.
but - it can been done.
motti

Hi Motti,
There are at least two ways to solve this depending on the problem. One ways is to use ActiveX technology to run a simulation model and get the results in the files saved from simulink. This is good if you have an off-line problem you do the calculations in simulink than the analysis in LabVIEW. If you have to communicate with the model interactively than you should use Real-Time WorkShop to create an executable and connect to it by TCP/IP. I have VIs for both solutions. I'm planning to release a LabVIEW toolkit for Matlab Simulink. If your problem is argent we can work out some deal.
Andras Ferencz
Naturen Kft.

Similar Messages

Need Expert's Advice - How to use LabView Efficiently and to increase Readability

My application is fairly complex. It is a real world testing applications that simultaneously controls 16 servo motors running various stress testing routines asynchronously and all at the same time. The application includes queues, state machines, sub VI's, dynamically launched VI's, subpanels, semaphores, XML files, ini files, global variables, shared variables, physical analog and digital interfaces and industrial networking. Just about every technique and trick that LabView 2010 has to offer and the kitchen sink as well.
Still I am not happy with the productivity that LabVIEW 2010 has provided, nor the readability of my final product.
Sometimes there are too many wires. Much of my state machines have a dozen or more wires just going from input to output, doing nothing, just because one or two states in the machine need that variable in some state. Yeah, I could spend alot of time bundling and unbundling and rebundling those values, but I don't think that would improve things much.
We have had a long discussion about the use or misuse of Local variables in this forum and I don't want to repeat that here. I use them sparingly where I think it is relatively safe to do so. I also have a bug whenever I try and copy some code that contains one or more local variables. On Pasting the code with local variables, the result is something other than what I expected, I am not sure what. I have to undo the paste and rebuild the code one object at a time.
I am also having trouble using trouble using Variable Property Nodes. When I cut and paste them, they often loose their reference object and I have to go back into the code and redo the Link To on each one. That wastes alot of time and effort.
Creating subVIs is often not appropriate when the code makes many references to objects on the Front Panel. Some simple code will turn into a bunch of object references and dereferences which also tends to take alot of work to clean up and often does not help overall readability in many cases. I use subVIs when appropriate, but because of the interface overhead, not as often as I would like to. My application already has over 150 sub VIs.
The LabView Clean Up Diagram function often works poorly. It leaves way too much empty space between objects, making my diagrams 3 to 4 24" screens wide. That is way too much and difficult to navigate effectively. The Clean Up function puts objects in strange places relative to other objects used nearby. It does a poor job routing wires and often makes deciphering diagrams more difficult rather than easier.
My troubleshooting strategies don't work well for large diagrams and complex applications. The diagrams are so complex that execution highlighting may take 20 minutes for a single pass. Probes help, but breakpoint aren't of much use, because single stepping afterwards often takes you to somewhere else in the same diagram. I can't follow the logic well doing this.
Using structures, I may have Case structures nested 5 to 10 levels deep inside some Event Structure inside a While Loop. Difficult to work with and not very readable.
All and all, I can make it work, but I am not happy about the end result.
I am hoping to benefit from some expert advice from those that are experienced in producing large complex applications efficiently, debugging efficiently and producing readable diagrams that they are proud of.
Can anyone offer their advice on how best to use the LabView features to achieve these results in complex applications? I hope that you can help show me the light.

I'm not an expert but I'm charged out as one at work.
I am off today so I'll share some thoughts that may help or possibly inspire others to chime. I have tried to continually improve my code in those areas and would greatly welcome others sharing their approaches and insights.
Note:
I do refactoring services to help customers with this situation. What I will write does not represent what we do in a code review since our final delverable is a complete final design and that is beyond the scope of this reply.
I'll comment on your points.
dbaechtel wrote:
My application is fairly complex. ...
While watching Olympic figure skating competion slow-motion replays, I learned how the subtleties of how the launching skate is planted while entering a jump can make the difference between a good jump and a bad one.
In software, we plant our foot when we turn from the design to the development. I have to admit that there where a couple of times when I moved from design to development too early and found myself in a situation like you have described.
How to know when design is done?
Waterfall says "cross every 't' and dot every 'i' " while Agile says "code now worry about design latter" and Bottom-up "says "demo working why bother designing" (Please feel free to coment on these over-simplifications gang).
My answer is not much more helpful for those new to LabVIEW.
My design work is done when my design diagrams are more complicated than the LabVIEW diagrm they describe.
dbaechtel wrote:
simultaneously controls 16 servo motors running various stress testing routines asynchronously and all at the same time. The application includes ...and the kitchen sink as well.
Have you posted any design documents you have? These will help greatly in letting us understand your application. More on diagrams latter.
Anytime I see multiple "variations on a theme", I think LVOOP (LabVIEW OOP ) . I'll spare you the LVOOP sales pitch but will testify that once you get your first class cloned off and running as a sibling (or child) you'll appreciate how nice it is to be able to use LVOOP.
Discalimer:
If you don't already have an OOP frame of mind, the learning curve will be steep.
dbaechtel wrote:
Still I am not happy with the productivity that LabVIEW 2010 has provided, nor the readability of my final product.
Sometimes there are too many wires....going from input to output, doing nothing,... spend alot of time bundling and unbundling and rebundling those values, but I don't think that would improve things much.
Full disclaimer:
I used to be of the same opinion and even used performance arguements to make my point. I have since, changed my mind.
Let me illustrate (hopefully). This link (if it works for you, use lefthand pane to navigate hierachy) shows an app I wrote from about 10 years ago when I was in my early days of routing wires. Even the "Main" VI started to suffer from too many wires as this preview from that links shows.
Clustering related data values using Type Definitions is the first method I would would urge. This makes it easier to find the VIs that use the Type def via the browse relationships>>>callers. If I implement my code correctly, any problem I believe is associated with a particualr piece of data that is a Type def has to be in one of the VIs that use that type def therefore easier to maintain.
When I wrote "related data" I am refering data normalization rules (which my wife knows and I picked-up from her and I claim no expertise in this area) where only values that are used together are grouped. E.G. Cluster named File contains "Path" and "Refnum" but not "PhaseOfMoon". This works out nicely with first creating sub-VI since all of the data related to file operations are right there whe I need it and it leads into the next concept ...
When I look at a value in a shift register on the diagram taking up space that is only used in a small sub-set of states, I concider using an Action Engine . This moves the wire from the current diagram into the Action Engine (AE), and cleans up the diagram. The AE brings with it built-in protection so provided I keep all of the opearations related to the the Type def inside the AE I am protected when I start using multiple threads that need at that data (trust me, it may not make a difference now but end users are clever). So that extra wire is effective encapsualted and abstracted away from the diagram you are looking at.
But I said earlier that I would not sell LVOOP so I'll show you what LVOOP based LV apps look like to contrast what I was doing ten years ago in that earlier link. This is what the top level VI looks like.
And this is the Analysis mode of that app.
I suspose I should not mention that LVOOP has wizards that automatically create the sub-VI (accessors) that bundle/unbundle the clusters, should I?
Continuing...
dbaechtel wrote:
We have had a long discussion about the use or misuse of Local variables...I also have a bug whenever I try and copy some code...
If you can simplify the code and duplicat ethe bug. please do so. We can get it logged and fixed.
dbaechtel wrote:
I am also having trouble using trouble using Variable Property Nodes....
That sounds like a usage issue. Posting code to illustrate the process will et us take a shot at figuring out what is happening.
dbaechtel wrote:
Creating subVIs is often not appropriate... My application already has over 150 sub VIs.
"Back in the day..." LV would not even try to create a sub-VI that involved controls/indicators. I use sub-VIs to maintain a common GUI often but I do it on purpose and when I find myself creating a sub-VI that involves a control/indicator, I hit ctrl-z immediately!
I figure a way around it (AE ?) and then do the sub-VI.
Judging by your brief explanation and assuming you do a LVOOP implementation, I would estimate that app need 750-1500 VIs.
dbaechtel wrote:
The LabView Clean Up Diagram function often works poorly....
THe clean-up works fine for how I use it. After throwing together "scratch code" and debugging the "rats nest" I'll hit clean-up as a first step. It guess good enough on simple digrams and in some cases inspires me to structure the diagram in a different way that I may not have thought about. If I don't like, ctrl-z.
Good deisgn and modualr implementaion led to smaller diagrams that just don't need thrre screens.
dbaechtel wrote:
My troubleshooting strategies don't work well for large diagrams and complex applications....Can anyone offer their advice on how best to use the LabView features to achieve these results in complex applications? I hope that you can help show me the light.
Smaller diagrams single step faster since the sub-VI run full speed. I cringe thinking about a 3-screen diagram with multiple probes open ( shivver!).
Re: Nestested structres
Sub-VIs (wink, wink, nudge, nudge)
If it works you have prven the concept is possible. That is the first step in an application.
I hope that gives you some ideas.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008.

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008. I have selected system target file as nidll.tlc,make command as make_rtw and template nidll_vs.tmf. When I try to generate .dll file I get the following error.
Attachments:
SITProblem.JPG ‏101 KB

Hi,
No . I could not solve the issue. Presently we are using microautobox (from Dspace)for doing the RCP.
Himadri

How to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and a novice in interfacing skill ..so plzzzzz explain me in a litle detail

how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

Sir
We were able to solve that problem...but now could you advice as to which DC power supply we should use (preferably avalable in India) so that it can be controlled by Labview (through a gpib/rs232/any other port) to give a square wave of desired frequency/other parameters.
Regards
Shivam

Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel

I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
        xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
    <af:document title="untitled1.jsf" id="d1">
        <af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
        <af:resource type="javascript" source="resources/js/home.js"/>
        <af:messages id="m1"/>
        <af:form id="f1">
           <af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
            <af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
                <af:noteWindow id="popupWindow">
                    <af:panelFormLayout id="pfl2">
                        <af:panelLabelAndMessage label="Task id" id="plam5">
                            <af:outputText value="#{homeBean.taskId1}" id="ot64"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Start Location Name" id="plam6">
                            <af:outputText value="#{homeBean.startLocation}" id="ot7"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Stop Location Name" id="plam7">
                            <af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="tasktype" id="pla2m7">
                            <af:outputText value="#{homeBean.taskType}" id="ot9"/>
                        </af:panelLabelAndMessage>
                    </af:panelFormLayout>
                </af:noteWindow>
            </af:popup>
            <af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
            <dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
                                 startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
                                 showMenuBar="false" showToolbar="false" iconPlacement="left"
                                 showTasksAsDailyBar="false">
                <f:facet name="major">
                    <dvt:timeAxis scale="days" id="ta1"/>
                </f:facet>
                <f:facet name="minor">
                    <dvt:timeAxis scale="hours" id="ta2"/>
                </f:facet>
                <f:facet name="nodeStamp">
                    <af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
                               headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
                        <af:outputText value="#{row.PersonId}" id="ot1">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
                        </af:outputText>
                    </af:column>
                </f:facet>
            </dvt:schedulingGantt>
        </af:form>
    </af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
    $("div[et]").live('mouseover', function (e) {
         $('#cb1').css("position", 'absolute');
         $('#cb1').css("top", e.pageY-4);
         $('#cb1').css("left", e.pageX);
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        var element = AdfPage.PAGE.findComponent("f1");
        var taskIdToPass = null;
        if ($(this).attr("tid") !=undefined) {
             taskIdToPass = $(this).attr('tid').toString();
        } else {
            taskIdToPass = $(this).parent().attr('tid').toString();
        var param = {            taskId : taskIdToPass        };
        AdfCustomEvent.queue(element, "jsServerListener", param, true);
        if (!popup.isPopupVisible()) {
            var hints = {};
            hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
            popup.show(hints);
    }).live("mouseout", function () {
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
    private RichPopup popup;
    private String taskId1;
    private String startLocation;
    private String stopLocation;
    private long taskId;
    private String taskType;
    public HomeBean() {
        super();
    public void serverEventHandler(ClientEvent clientEvent) {
        String taskIdString = clientEvent.getParameters().get("taskId").toString();
        this.taskId = Long.parseLong(taskIdString);
        DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
        ApplicationModule am = dc1.getApplicationModule();
        ViewObject vo = am.findViewObject("PdTrfDayView1");
        RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
        Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
        Row row = rows[0];
       this.taskId1 = row.getAttribute("PdTrfDayId").toString();
       this.startLocation = row.getAttribute("StartLocation").toString();
       this.stopLocation = row.getAttribute("StopLocation").toString();
       this.taskType = row.getAttribute ("PdTrfTypeId").toString();
        RichPopup.PopupHints ph = new RichPopup.PopupHints();
        vo.closeRowSetIterator();
    public long getTaskId() {
        return taskId;
    public void setPopup(RichPopup popup) {
        this.popup = popup;
    public RichPopup getPopup() {
        return popup;
    public String getTaskId1() {
        return taskId1;
    public String getStartLocation() {
        return startLocation;
    public String getStopLocation() {
        return stopLocation;
    public String getTaskType() {
        return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AM

Hi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}"

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.

Here is how to use the PLL. But I don't know of how to interact with that device
http://zone.ni.com/devzone/cda/tut/p/id/3781
And for thouse who don't know what a PLL is a free bonus link is here:
http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument
and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC702LP6CE
Now we are all caught up to speed.
Sam S
Applications Engineer
National Instruments

How to use labview with the handyboard

Hi,
how to use labview with the handyboard
Thx...

I'm assuming you're talking about this, since you didn't provide a link for those of us who don't know what you're talking about.
As the other poster said, you didn't say how you want to use LabVIEW with it. If you want to write LabVIEW programs than run on the microprocessor, then you're out of luck. If you want LabVIEW to interact with it, then you've got a couple of options, SPI probably being the best, but it also has DI and AI that you could use to communicate with it - the DI's could be used as a parallel interface.
Message Edited by Matthew Kelton on 12-17-2007 02:21 PM

How to use labview with gpib to connect with Agilent PNA E8362B ?

how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

Duplicate Post.

How to Use LABVIEW charts with Mathscript

Hi,
   I recently tried to work on Mathscript and it is really amazing. what I tried to figure out is:
    Instead of plotting using traditional "plot" statement, how to use LabVIEW chart ( I know how to Add output but the graph were not as expected
Is there any mean to get rid of this "Lengthy" delay that "ALL MATLAB User know" for first time compilation?
Thanks in advance
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology

Well Chris,
         I was about to post the solution, but as I said, I'm in a middle of experts
It took me 3 hours to figure it out. I should've checked your answer . I resolved to the same suggesstion of yours. I only added some functionality to get the newbies like me being acquainting with how easy to work with LABVIEW mathscript based on MATLAB knowledge.
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology
Attachments:
Play with Mathscript.vi ‏35 KB

How to use LabView to control Primera Bravo II CD burner?

I am trying to use LabView to control the Primera Bravo II CD burner and label printer. The software that controls the Bravo II is PTPublisher. How to use LabView to communicate/control the PTPublisher? Please help, Thanks

Hi Qian,
I installed PTPublisher on a virtual machine, and I was wondering what kind of tasks you wanted to control within LabVIEW. From the program GUI, it appears like the only way to access functions is via mouse clicks. Do you know of any other way to control the Bravo II CD burner besides the PTPublisher software? If not, does the PTPublisher allow you to control it in some way other than clicking?
Peter K.
National Instruments

Report Generation Toolkit (Word) : How to use correctly bookmark and cross-reference without "Error! Reference source not found"

Hi,
I try to generate a report using a template. In my template I use some cross-reference to refer to one bookmark. For exemple in the first page I created a bookmark for my name and in the header I created a cross-reference refer to my name. The problems is when I run my VI the bookmark actualise perfectly but the cross-reference refer to the bookmark can't actualise with the same value and generates an error : "Error! Reference source not found".
Can somebody help me please!
Nki
Solved!
Go to Solution.
Attachments:
01.jpg ‏72 KB

Hi,
When i create the word template, the bookmaks and the cross-reference referred to the bookmark update correctely. The problem is when I try to change the bookmark using "report generation from template vi" the bookmark change but not the cross-reference and the error generated is "Error! Reference source not found".
I make coople reasherch and i think they have no solution for this because : "if the text in a heading referred to in a cross-reference is revised, the cross-reference to the heading may no longer work" (http://office.microsoft.com/en-us/word-help/troubleshoot-cross-references-HP005189368.aspx).
To "resolved" this problem I create an other bookmark in the template who have the same value white the principle bookmark.
I use Labview 2011 and Micosoft office 2010.

How to use direct select and insert or load to speedup the process instead of cursur

Hi friends,
I have stored procedure .In SP i am using cursur to load data from Parent to several child table.
I have attached the script with this message.
And my problem is how to use direct select and insert or load to speedup the process instead of cursur.
Can any one please suggest me how to change this scripts pls.
USE [IconicMarketing]
GO
/****** Object: StoredProcedure [dbo].[SP_DMS_INVENTORY] Script Date: 3/6/2015 3:34:03 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <ARUN,NAGARAJ>
-- Create date: <11/21/2014>
-- Description: <STORED PROCEDURE FOR DMS_INVENTORY>
-- =============================================
ALTER PROCEDURE [dbo].[SP_DMS_INVENTORY]
@Specific_Date varchar(20) ,
@DealerNum Varchar(6),
@Date_Daily varchar(50)
AS
BEGIN
SET NOCOUNT ON;
--==========================================================================
-- INVENTORY_CURSUR
--==========================================================================
DECLARE
@FileType varchar(50),
@ACDealerID varchar(50),
@ClientDealerID varchar(50),
@DMSType varchar(50),
@StockNumber varchar(50),
@InventoryDate datetime ,
@StockType varchar(100),
@DMSStatus varchar(50),
@InvoicePrice numeric(18, 2),
@CostPack varchar(50),
@SalesCost numeric(18, 2),
@HoldbackAmount numeric(18, 2),
@ListPrice numeric(18, 2),
@MSRP varchar(max),
@LotLocation varchar(50),
@TagLine varchar(max),
@Certification varchar(max),
@CertificationNumber varchar(max),
@VehicleVIN varchar(50),
@VehicleYear bigint ,
@VehicleMake varchar(50),
@VehicleModel varchar(50),
@VehicleModelCode varchar(50),
@VehicleTrim varchar(50),
@VehicleSubTrimLevel varchar(max),
@Classification varchar(max),
@TypeCode varchar(100),
@VehicleMileage bigint ,
@EngineCylinderCount varchar(10) ,
@TransmissionType varchar(50),
@VehicleExteriorColor varchar(50),
@VehicleInteriorColor varchar(50),
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max),
@InteriorColorCode varchar(50),
@ExteriorColorCode varchar(50),
@PackageCode varchar(50),
@CodedCost varchar(50),
@Air varchar(100),
@OrderType varchar(max),
@AgeDays bigint ,
@OutstandingRO varchar(50),
@DlrAccessoryRetail varchar(50),
@DlrAccessoryCost varchar(max),
@DlrAccessoryDesc varchar(max),
@ModelDesc varchar(50),
@Memo1 varchar(1000),
@Memo2 varchar(max),
@Weight varchar(max),
@FloorPlan numeric(18, 2),
@Purchaser varchar(max),
@PurchasedFrom varchar(max),
@InternetPrice varchar(50),
@InventoryAcctDollar numeric(18, 2),
@VehicleType varchar(50),
@DealerAccessoryCode varchar(50),
@AllInventoryAcctDollar numeric(18, 2),
@BestPrice varchar(50),
@InStock bigint ,
@AccountingMake varchar(50),
@GasDiesel varchar(max),
@BookValue varchar(10),
@FactoryAccessoryDescription varchar(max),
@TotalReturn varchar(10),
@TotalCost varchar(10),
@SS varchar(max),
@VehicleBody varchar(max),
@StandardEquipment varchar(max),
@Account varchar(max),
@CalculatedPrice varchar(10),
@OriginalCost varchar(10),
@AccessoryCore varchar(10),
@OtherDollar varchar(10),
@PrimaryBookValue varchar(10),
@AmountDue varchar(10),
@LicenseFee varchar(10),
@ICompany varchar(max),
@InvenAcct varchar(max),
@Field23 varchar(max),
@Field24 varchar(max),
@SalesCode bigint,
@BaseRetail varchar(10),
@BaseInvAmt varchar(10),
@CommPrice varchar(10),
@Price1 varchar(10),
@Price2 varchar(10),
@StickerPrice varchar(10),
@TotInvAmt varchar(10),
@OptRetail varchar(max),
@OptInvAmt varchar(10),
@OptCost varchar(10),
@Options1 varchar(max),
@Category varchar(max),
@Description varchar(max),
@Engine varchar(max),
@ModelType varchar(max),
@FTCode varchar(max),
@Wholesale varchar(max),
@Retail varchar(max),
@Draft varchar(max),
@myerror varchar(500),
@Inventoryid int,
@errornumber int,
@errorseverity varchar(500),
@errortable varchar(50),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000),
@Invt_Id int,
@flatfile_createddate datetime,
@FtpDate date,
@Inv_cur varchar(1000),
@S_Year varchar(4),
@S_Month varchar(2),
@S_Date varchar(2),
@Date_Specfic varchar(50),
@Param_list nvarchar(max),
@Daily_Date Varchar(50);
--====================================================================================
--DECLARE CURSUR FOR SPECIFIC DATE (OR) DEALER-ID WITH SPECIFIC DATE (OR) CURRENT DATE
--====================================================================================
set @Date_Specfic = Substring(@Specific_Date,1,4) +'-'+Substring(@Specific_Date,5,2)+'-'+Substring(@Specific_Date,7,2);
set @Daily_Date = SUBSTRING(@Date_Daily,14,4) + '-' + SUBSTRING(@Date_Daily,18,2)+ '-' + SUBSTRING(@date_Daily,20,2)
IF @Daily_Date IS NOT NULL
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where
CONVERT (date,flatfile_createddate) = CONVERT (date,GETDATE()) order by flatfile_createddate;
END
Else
BEGIN
if (@Date_Specfic IS NOT NULL AND @DealerNum != '?????')
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic AND ACDealerID='ACTEST' + @DealerNum;
END
ELSE
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic;
END
END
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO
@FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
WHILE @@FETCH_STATUS = 0
BEGIN
--==========================================================================
-- INSERT INTO INVENTORY (PARENT TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY]
DMSDealerID,
StockNumber,
DMSType,
InventoryDate,
FtpDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate,@FtpDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
-- PRINT @errornumber;
-- PRINT @errorseverity;
-- PRINT @errortable;
-- PRINT @errorprocedure;
-- PRINT @errorline;
-- PRINT @errormessage;
-- PRINT @errorstate;
set @myerror = @@ERROR;
-- This -- PRINT statement -- PRINTs 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
-- PRINT N'Error = ' + @myerror;
set @Inventoryid = scope_identity();
-- PRINT @Inventoryid;
--==========================================================================
-- INSERT INTO DMS_INVENTORY_DETAILS (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_DETAILS]
DMSInventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode,
FtpDate
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errorstate = ERROR_STATE(),
@errortable = 'DMS_INVENTORY_DETAILS',
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXECUTE [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_AMOUNT (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_AMOUNT]
DMSInventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail,
FtpDate
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_AMOUNT',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_VEHICLE (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_VEHICLE]
DMSInventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage,
FtpDate,
EngineCylinderCount
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage,
@FtpDate,
@EngineCylinderCount
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_VEHICLE',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- MOVE CURSUR TO NEXT RECORD
--==========================================================================
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
SET ANSI_PADDING OFF
END
Arunraj Kumar

Thank you.
And another question if the data is already there in the child table if i try to load alone it must delete the old data in the child tablee and need to get load the new data and
How to do this ?
Arunraj Kumar
You can do that with an IF EXISTS condition
IF EXISTS (SELECT 1
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
DELETE t
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
INSERT INTO YourChildTable
where Bkey1,Bkey2 etc forms the business key of the table
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to use radioButton(s) and image controls on windows phone 8.1

how to use radioButton(s) and image controls on windows phone 8.1

Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to use SQL OVER and PARTITION BY in OBIEE Expression Builder??

Hi there,
I want to create a new logical coulmn with the following SQL query.
SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE )/SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C )
How to use the OVER and PARTITION BY in OBIEE Expression Builder??
Thanks in Advance

hi bipin,
We cant use by in Expression builder(rpd) .But use the same formula like this in Fx of answers
SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE )/SUM(Inventory Detail.Qty) >OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C )SUM(Inventory Detail.Qty by Detail,ITEM,Mydate)/SUM(qty by detail,item)
First check the numerator whether it was giving correct results or not then go with denominator
compare the results with sql that u have
Let me know if that does work
thanks,
saichand.v
Edited by: Saichand Varanasi on Jul 27, 2010 9:27 PM
Edited by: Saichand Varanasi on Jul 27, 2010 9:28 PM

How to use the validations and exceptions in BPEL

Hi,
How to use the validations and exceptions in BPEL.
pls provide one sample example to give the exceptions and validations in BPEL

Hi,
For example you can create a simple BPEL Process and you can throw an error during running process. If input data is not valid and format is not correct you can throw error using throw activity and using catch activity you can catch particular error. The catch-all will handle all the error occurred with the scope.
you can also refer faulthandling section in the link for more information related to exception handling.
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/faults.htm#sthref1188
Regards,
Deepa

How to use Labview 6i and Simulink model ????

Similar Messages

Maybe you are looking for