How to use Linksys router as bridge?

I am trying to extend the wifi signal by using another router as bridge
Source router is Netgear N150 b/g/n and here are the settings
IP 192.168.254.1
Subnet mask 255.255.255.0
Default Gateway 192.160.254.254
Channel number is on auto
I have a Ubuquiti antenna
Here is the webpage for the antenna
http://www.amazon.com/gp/product/B004EGI3CI/ref=oh_aui_...
I connected Linksys E900 router to this antenna and then another cable is connecting the router to my laptop
To access antenna settings I typed 192.168.1.20 and accessed the antenna settings I chosed bridge option
Then accessed internet explorer typed in 192.168.1.1 for linksys router settings
Here is the linksys settings
IP 192.168.1.43
Subnet mask 255.255.255.0
Default Gateway 192.168.1.1
Channel number is on auto
I choosed the channel number different than the one from the original signal and chose bridge as option
While it was connected I tried to surf the net but it did not work
I unplugged it form the router and checked the wifi signals and saw my wifi signal very strong
But tried to connect but it says can not connect
Can someone help me?.
Is default gateway supposed to be the same in main router and the bridge router and the antenna?

You need to verify with the e900 that it actually has the Bridge mode feature, it it does not, the only other thing you can do is to run it in wired AP mode:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=169333b784cf4c78b8db5490f85c518a_Setting_.xml&pid=...
http://www.northshore-it.com/tips/how-tos/cascade_linksys/#LAN_to_LAN
If you you an actual bridge mode feature, and the e900 will not work, I suggested reviewing this as an alternative:
http://store.linksys.com/products/linksys-entertainment_bridges_stcVVcatId554254VVviewcat.htm

Similar Messages

Not sure how to use linksys wired router and using Airport Express as bridg

Hey, thanks for any help.
I now own a Linksys BEFSR41 Cable Router. I was told earlier that I could connect the modem to this router and then to the wireless AEBS. I was wondering if anyone knows how to do this bridge thing. Also if anyone has any experience with this linksys router with a mac.
Thanks a lot!

all good, thanks though!

Using linksys router

OK have just got first mac after many years with PC. Have PC lan going through Linksys router.
Have got latest firmware. updates to latest osx
using the ethernet cable life is fine
on wireless(and I have tried this with 3 routers) its sad. even hitting the router is slow(very slow) to bring up a page , yet the ping time seems reasonable.
I will probably just find an ethernet wireless bridge , but any ideas. I don't think this is specific to a router. using WPA security , DHCP.
thanks

ok i sorted this out
got a buffalo access point
used the buffalo to connect over wireless to linksys
ethernet into buffalo
still cant get airport on mac to talk direct to linksys

How to use External Routing in Human Task

Hi,
Could you please help me knowing how to create External Routing in Human Task in SOA Composite.
Thanks

When defining the external routing class in the .task, you can define the name value pairs which you want to pass to the program. Here you can pass dynamic values to the class as well by reading the appropiate node from the payload. In your class the name, value would be available in the "Map propertyBag" parameters in Rajiv's example link.
Document says:
Map of properties — When an assignment service is specified, a list of properties can also be specified to correlate callbacks with backend services that determine the task assignees.Or if you are too lazy to map many parameters and values, you can always read the whole Task task and then use getDocument and some xml reading to determine the values. This Task is the whole document.
API:
http://docs.oracle.com/cd/E17904_01/apirefs.1111/e10660/oracle/bpel/services/workflow/task/model/TaskType.html#getDocument__Document says:
Task document — The task document that is executed by the workflow. The task document contains the payload and other task information like current state, and so on.Also you need to make sure that you are maintaining the state of the assignment class, doc says:
The assignment service class cannot be stateful because every time workflow services need to call the assignment service, it creates a new instance.Thus if you are doing multiple serial assignments one after the another and if your server restarts in between, then the approval would start at the first assignee again. Suppose in Rajiv's doc link e.g., if the task is assigned to 'wfaulk' and the server restarts then the task would be assigned back to 'jstein'. In order to prevent this you need to modify the java code and each time the variable changes it's value you need to place it in a dehydration store. Also on each action over the process you need to reinitialize the variable from that dehydration store.
-Bikash

How to setup linksys router on a mac

just bought the wrt54G and the setup cd only works for a pc. Does anyone know how to install it on a mac book.

sorry my message was sent before I completed it...
as I was saying, you need to first look for the IP address of your default gateway. In a new Linksys router, it is usually 192.168.0.1 or 192.168.1.1 but to be sure, check your default gateway settings by looking at your wireless adapter configuration.
Once you get the IP address, open up your browser and type in the IP address of the default gateway.
You will be shown a router login page. Leave the username blank and type in "admin" for the password.
You will now be in the configuration/setup menu. You can immediately start configuration from here. If you need any help, just click on the help screens at the right hand part of your monitor.
Hope this helps
tb

No longer using Linksys router. Should I uninstall Cisco LEAP, PEAP, and EAP?

Should I uninstall the Cisco LEAP, PEAP, and EAP programs if I am no longer using a Linksys router? I am replacing with an Asus router.
thanks,
KG

Hi! It's best to uninstall them all if you are not going to use them for the sake of freeing some memory on your computer. Should you change your mind and get a new Linksys router one of these days, I am sure it will come with its own installation software anyway.

My HCL Laptop Hang When i use LINKSYS ROUTER WRT300N

LINKSYS,
I think you help me to solve my problem, i am using HCL Notebook P7910, And LINKSYS ROUTER WRT300N (V.1, Latest Firmware).
Problem is when i use through LAN cable then working Fine but when i use THROUGH WI-FI then my laptop HANG.
I also Contact with both coustomer cares, but problem not solved.
what can i do both products are in warranty , warranty expire in next 1 month.

Try these settings:
Radio Band – 40
Wide Channel – 6
Standard Channel – 11

Using Linksys router with Time Capsule / Airtunes...

Hi,
Does anyone have any idea how I can use my old Linksys WRT54G wireless router with my Time Capsule in such a way that the WRT54G provides a b/g network and I can have my Time Capsule provide just 802.11n for the best possible speed?
I have the two connected via Ethernet (TC connected directly to my cable modem) but don't seem to be able to get things to work.
I know I must be on the edge of getting this to work but am obviously missing the final step...
Cheers in advance for any help you can give,
Adi :o)

go to this link:
http://discussions.apple.com/thread.jspa?messageID=6831703#6831703
than the link at the bottom of the page.
i just set this up this weekend - everything works perfectly.

How to use SAP Router String with SAP Web Services

Hi All,
I have developed an SAP Web Service and I'm using it from a vb.net dll by using web reference.
I want to use an SAP Router string when I try to call web service but I don't how to do it.Should the url of my proxy contain this router string in itself or is there any other attribute that I should configure for this purpose?
Please help!!!
MERAL
My code is as in the followings .
(And my SAP router string is like /H/111.11.111.11/H/)
Dim srvProxy As New PSUDamacanaProxy4.Z_SDB_RFC_GetList
            srvProxy.Url = s"http://21.11.1.43:8000/sap/bc/soap/rfc"
            srvProxy.Timeout = 10000
            srvProxy.Credentials = New System.Net.NetworkCredential(strUserName, strPassword)
            srvProxy.Z_SDB_RFC_GetList(p_bayi, durum, True, miktar, telefon, expMusteri, expReturnValue, expSiparis, expTeslimat, expAdSoyad)
            musteriAdSoyad = expAdSoyad
            ReturnValue = expReturnValue
            srvProxy.Dispose()
            srvProxy = Nothing

Since I posted this question, I have abandoned the notion of
auto-generated web services and embraced the good old FDS concept
where the RemoteObject meta-tag does all the conversion work for
me. We are now using the Granite DS package and it is working well
for us. I would love to consume web services, but it just isn't
worth the hassle when all you have to do with Granite (and FDS) is
cast your return objects to the proper object type.
BTW, since this posting, I have investigated competing Flex
app frameworks. After my research, I checked out the PureMVC
framework. Wow!! Cairngorm always left me with an uneasy feeling
and I guess I am not alone. Apparently, Cliff Hall felt the same
way. That is why he started the project. I like his approach alot
more than Cairngorm especially since it includes notifications
which allow me to broadcast my own app level events independent
from the AS Event framework. Check out PureMVC. For what it is
worth, it has my humble endorsement. Cliff was even gracious enough
to acknowledge the other Adobe Consulting guys for their work. Good
for you Cliff, I respect that. Check out a better way at
http://www.puremvc.org/

Lost connection to other computers using 'LinkSys' router

DSL modem is connected to my Linksys wireless router. I have two other computers connected using an Ethernet cable (coming from the router). Yesterday my internet (SBC-Yahoo DSL) was down for the entire day. In the past both computers connected to the router would work just fine. In fact the laptop would work either connected via the Ethernet cable or with a wireless connection. Today neither of the computers connected to the router will connect. I have not changed any of the settings on either computer. Have reset the DSL modem (turned off and back on) and have reset the router (reset button). Any suggestions on this problem?

Can you connect to the router?
Open a browser and go to 192.168.1.1
Verify the configuration options.
Also make note of the firmware version.
Then, for the moment, bypass the router and direct connect to the modem. Can you connect to internet then?
If so, check the Linksys web site to see if there is a firmware update for your router.
On my (wired) Linksys, after one of the OS updates (I forget which one) I could no longer get to internet until I updated the firmware on the router.
Since there has been an OS security update in the last week, and if you downloaded/installed it, then your problem began, its possible that is the problem.

New bt infinity with HH5. How to use own router?

Hi guys,
I have just this morning had my infinity 2 installed. Went with BT as I had read it's very easy to use your own router.
My engineer has just left. I was expecting an openreach modem, but didn't realise HH5 had the modem built in. No problem, must be very similar to my old virgin superhub, combo device. I'll putt he home hub into modem only mode right?
Nope, can't see such an option. Is there anyway I can get around this? Will be a deal breaker for me!
Thanks

At worst you can buy a HG612 from "a well known auction site"
If you found this post helpful, please click on the star on the left
If not, I'll try again

How to use color labels in Bridge to inform conditional treatment in PS?

I'm trying to find a way of using the color labels in Bridge ('select', etc.) to allow conditional use in Photoshop javascript.
So, for example, all the images tagged with red will be sized to 600px, while those tagged with green will be sized to 400px.
Any ideas?
Ian

A search of the forum for ExternalObject should find you plenty of reference…?
You just need to load library…
Retrieve your value…
Do your Photoshop process ( use switch or if/else )
Unload the library
Done…
If you struggle post back I may be able to help…

Mac osX question regarding persistent LAN problem using Linksys router

We are eight months into this problem.
I had this up on the apple help board 6 months ago but could only get a band aid fix for the problem.
(The "band aid" is explained on the link below.)
We have since exhausted 3 other professional help folks.
We are using the WRT54GS ver. 5.
Before we were using BEFSx41 ver. 2 and we had same problem.
The full description of the problem can be found on this page...
http://discussions.apple.com/thread.jspa?messageID=9062933#9062933
ANY well thought out suggestions deeply appreciated.
Thanks.

Sorry dude, definitely sounds like a mac problem (i.e. editing the cnf files on mac s). Unless you are blocking a special service, which you probably aren't, then its definitely not the router. The reason I say that is all traffic gets transferred at layer 2 of the OSI model, in this case. IP addressing is layer 3 (router/network layer). Short answer is all traffic gets "switched" via mac address, not ip in this case. Your router here is more like a switch that provides dhcp and a default gateway to get to the internet. Any unknown mac (media access control, not mac/apple) traffic will get "routed" to the wan.
Message Edited by bubbateeth on 02-27-2009 01:46 AM

When & how to use Instance.route(activityName) method in OBPM 10gr3.

Hi
Could some one please briefly explain the use of Instance.route(activityName) method & plz share if you have any examples on it
Thanks in advance.
Santosh K.

I tried your code and I have no trouble getting entries back. Looking at the internal code, if and exception occurs the method just returns an empty IList. So you need to check for something like this in the ULS logs "Cannot access ULS share
on \\{0}\logs", appears to be a permissions issue.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

How to use " External Routing " in Human Task (BPEL Process)?

Hi All,
Can anyone help me to provide any url or suggestion about "External Routing" in Human task?
Thanks in Advance.
Sharmistha

Have you seen this? http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bp_workflow.htm#SOASE798 & this 11.1.1.5: BPEL External Routing
Let me know if you need any other information.
Cheers,
Bikash

How to use Linksys router as bridge?

Similar Messages

Maybe you are looking for