How to use local variables to pass an image mask correctly

I'm kind of new to labview but i'll try to explain the problem as best as i can: I'm trying to pass an image mask (basically an image) to the next iteration of a while loop using local variables. I think the image passes through the loop with the local variable but i can't read from it correctly for some reason. And I don't think the problem has to do with local variables because i've tried using shift registers and that didnt work either. I think the problem is that you need to do something to read the image correctly again, like using IMAQ copy or something (that didnt work tho), but i can't figure out what the problem is. Does anyone know what the problem is? I know this isnt a great explanation and if its too confusing i could send some snapshots of the program or something. Any help would be greatly appreciated though.
Thanks,
Will

So i attached 2 snapshots of the program to give a better idea of the problem. The first snapshot shows an image getting written to the local variable SavedMask. The second snapshot, which is run on the next iteration of a while loop, shows the local variable SavedMask being read to other image operations. When i run the program, the SavedMask image is always displayed correctly on the front panel, but i can't read from it for whatever reason. I think the problem could be like you said, that im only passing an imaq reference, and i think theres a certain way to extract the image data. Do you know the correct way to extract the image data or how to pass the image data and not just a reference to the data.
Attachments:
first.jpg ‏81 KB
second.jpg ‏68 KB

Similar Messages

How to use local variable in member formula?

Hi Expert,
We would like to use a {local variable} in a member formula, so that it can pick up the prompt from webform upon save. Would like to know if it is possible to do? If so, what is the correct syntax?
We attempted to use brace {scenario}, blacket [scenario], blacket with quote ["scenario"]. None of these work.
We are using 11.1.2.1 version, EPMA, Hyperion Planning.
Thanks in advance for your help!

One other pointer. Where did you define your variable? Hopefully you went into Calc Manager and selected <Tools>, <Variables>. From there, navigate to your application or database. Right-click on your application or database and select "New". In the bottom panel, you'll need to select your Variable Type. Make sure you select "Member", and not "Members". You cannot pass "Members" (plural) to a web input form. Also, if you want to define a variable for a custom dimension, you'll need to do it at the database level. Standard dimension member variables can be defined at the app level. (Not sure why this is the case, especially when my custom dimension exists in all plan types . . . . )
Anyway, hope this helps,
- Jake

How to use local variables declared in b/t the methods in other views

Hi
i need to use the value of the local variables declared in b/w the views in one other view,as i have manipulated the value based on some condition & want to use it in 1 more view for my req.,but that variable is not global one just for once i need to use it,and i can't again write the whole for its conditions,as its there in initialization view,which if coded again,can hit the functionality there,so is it possible to use the value of such local variables thereafter or not,if yes pls let me know,or i need to declare the global variable for this.

hi,
1.Declare an Attribute in Component controller.
2. Pass the value to this Attribute in View V1.
using :
wd_comp_controller->Att = 'Saurav'.
3. Now in view2 , you can access this Attribute using:
data lv type string.
lv = wd_comp_controller->Att .
Here Att is my attribute of type string declared in component controller.

How to use local variables in control files for loading data

i want to count the number of records which have odd number like...
Data in data.txt
1 a
2 b
3 c
So my count = 2, i will write this to another file.
Plz help me how to achieve this

If you want to extract some rows from a file and write them to another one, why do you need Oracle? What is your requirement?
Or are you asking out of curiosity how can this be done in Oracle?
You can create an external table for this input file, select the rows you want from it and write them to another file using utl_file.
External tables: http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/et_concepts.htm#SUTIL011
UTL_FILE: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#sthref14095

Problem using local variable in event loop

I have a state machine from which I want to monitor various controls, including "Start" and "Stop" buttons. Not every state needs to monitor the controls. At present, most states run timed loops. In the first state that reads the front panel, I have an Event structure (inside a While loop) that monitors the various controls' Change Value events. For numeric controls, I update variables (in shift registers) as needed. The "Start" button is used to end the While loop controlling the Event structure, allowing the State to exit to the next state.
My problem comes in subsequent states that employ this same idea. Here, I put a Local Variable bound to the Start button and use the same code, but it frequently happens that when I enter this particular state, I cannot "turn on" the control -- I push the button, but it stays off. Curiously, if it was On when I enter, I can turn it off, but then I'm stuck not being able to turn it on.
I mocked up a very simply routine that illustrates this. There are two sequences (corresponding to the two states). Both use an Event loop with a local variable bound to my Stop button (really this is an LED control with custom colors). I've deliberately moved the "initialization" (the declaration of the control in the block diagram) out of the Event loops -- putting it inside the first loop modifies the behavior in another strange way.
Here's my thinking on how I would expect this to work: The code outside Event Loop 1 should have little effect. Assume the Stop button is initially Off. You will "sit" in Event Loop 1 until you push the Stop button, changing its value to True; this value will be passed out of the Event case and cause the first While loop to exit. You now enter the second sequence. As I understand the Exit tunnel, it defaults to "False", so I'd expect to stay in the second Event loop until I turn the Stop button from On to Off, which will pass out a False, and keep me in the While for one more button push. However, this doesn't happen -- I immediately exit, as though the "True" value of the Stop local variable is being seen and recognized by the Event loop (even though it hasn't changed, at least not in the context of this second loop).
An even more curious thing occurs if I start this routine with the Stop button turned on. Now I start in my Event loop waiting for a change, but this time the change will be from On to Off, which won't cause an exit from the frame. This will be reflected by having the While loop count increment. We should now be in the state of the example above, i.e. in an Event loop waiting for the control to be pushed again, and turned On. However, clicking the control has no effect -- I cannot get it to "turn on".
Where am I going astray in my thinking? What is it about this method of doing things that violates the Labview paradigm? As far as I can tell, what I'm doing is "legal", and I don't see the flaw in my reasoning, above (of course not -- otherwise I'd have fixed it myself!). Note that because I'm using local variables inside Event loops (and I'm doing this because there are two places in my code where I want to do such testing), the Stop control is not latching (as required). Is there something that gets triggered/set when one reads a latched control? Do I need to do this "manually" using my local variable?
I'll try to attach the simple VI that illustrates this behavior.
Bob Schor
Attachments:
Simple Stop Conundrum.vi ‏14 KB

altenbach wrote:
Ravens Fan wrote:
NEVER have multiple event structures that share the same events.
Actually, that's OK. NOT OK is having multiple event structures in the same sequence structure.
See also: http://forums.ni.com/ni/board/message?board.id=170&message.id=278981#M278981
That's interesting. I had always thought I read more messages discouraging such a thing rather than saying it was okay. Your link lead me to another thread with this message. http://forums.ni.com/ni/board/message?board.id=170&message.id=245793#M245793. Now that thread was mainly concentrating on registered user events which would be a different, but related animal.
So if you have 2 event structures they each have their own event queue? So if you have a common event, one structure pulls it off its event queue and it does not affect the other structure's event queue? I guess the inherent problem with this particular VI was that the second event structure locked the front panel. Since the code never got to that 2nd event structure because the first loop never stopped because the change was from true to false. After reading your post and the others, I did some experimentation and turned off the Lock front panel on the 2nd structure, and that prevented the lockup of the program.
Overall, the example VI still shows problems with the architecture and I think your answer should put the original poster on the right track. I think as a rule I would probably never put the same event in multiple structures, I feel there are better ways to communicate the same event between different parts of a program, but I learned something by reading your reply and about how the event structures work in the background. Thanks.

How to use the variables used in the message mapping

Hi ,
In the message mapping we can declare variables in the JAVA section , these variables could be used across the mapping .
I have tried using it but I am unable to retrieve the values assigned to the variables in one UDF into the another UDF .
Please guide me how to use the variables declared in the JAVA section in the message mapping .
Thanks
Anita Yadav

Anita,
I have worked on the Global variables and i found no issues. Make sure that the variable is declared in the Declaration Section and then initlaized in the Initialization section.
If you declare a variable in the Declaration Section ,
int i;
then in any udf you can use if directly. No need to re declare the variable in the UDF. If you do this, then it becomes a local variable.
Regards,
Bhavesh

Possible to use local variables in Calculation Manager

Hi,
I'm using calculation manager in EPMA for the first time. Have not found any function for using "local variables", i.e. variables that can be used for fixing on the current members a user has selected in a form. Do someone know if it is possible to use that functionality in calculation manager? And in that case, how do I find it?
Thanks!
Regards
Mats

Hi,
I guess you are referring to local variables in Essbase Administration Console. When you are in calculation manager (System View), you can go to Tools->Variables. There you can create variables at application, database (global) or business rule level (local variable). You can use these in Business rules by placing the name in curly bracket {...}.
The usage of the variables in the forms is the same as before.
If however, what you meant to say by local variables is substitution variables, yes you can use them in Calc manager the same way you use in calc script.
Cheers,
Alp

How to use string variable onside quotes

Hi,
i would like to know how to use string variable onside quotes. what i mean is if i have a LOV variable P_STATUS as character string.
and in my PL/SQL function i give a query as
Q AS VARCHAR2(1000) := 'SELECT * FROM EMP
WHERE STATUS = :P_STATUS';
Is this correct. I Know that the above statement works when the LOV is an integer, but when i use a character LOV return value the above statement does not work. how can i get in the character LOV value.
Can someone help me please.
Thanks,
Philip.

916753 wrote:
Yes I tried binding all the values separately. It is working, but, I am trying to pass all values by variableBut you can't. The variable is holding a single string value.... that is just 1 value. Your binding are expecting multiple values. You can't bind 1 string value and expect Oracle to magically know how to break your string up into seperate values for the bind variables. What if one of your bind variables actually needed e.g. a comma seperated string as it's value? How would Oracle know that?
You must bind each thing seperately. That's the way cursors work.
, because i have more than 150 tables in which data will be load. that's why i m trying to create a unique procedure to load data one by one table. Otherwise I have to write individual procedures for per procedures.It's a hard life being a software programmer, but somebody's got to do it. Unfortunately there are too many people who try and write "generic" procedures and expect them to just work. I mean why don't Oracle just implement some SQL command so you can do...
execute immediate 'load all my tables';save us all the hassle eh!? ;)
when i write all the columns like
execute immediate (insert_string) using rc1.TOLL_ID, rc1.LANE_ID, rc1.RECEIVED_DATETIME, rc1.LANE_QUERY, c1.EXECUTED_DATETIME
but it is not possible to generate runtime variable thats why I m trying to assign all values to a single variable and use it like
execute immediate (insert_string) using (v_string)
how can I separate the values and ho to use it .Don't use execute immediate. Use the DBMS_SQL package instead and bind your values dynamically with loops to cover all the columns you need etc.

How can use a variable in the folowing code?

How can use a variable 'W_ROWNUM2' in the folowing code?
MOVE '1' TO CNT.
LOOP AT L_T_PM2.
              CONCATENATE '0' CNT INTO W_ROWNUM2.CONDENSE W_ROWNUM2.
               CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
    perform DYNPRO_FIELD       using FLD2
                                 L_T_PM2-vari12_con.
               CNT = CNT + 1.
               CONDENSE CNT.
ENDLOOP.
I need to increment the value of W_ROWNUM2.
Please ,it is urgent!!

Hello
CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
Try using spaces between parts of the resulting string.
CONCATENATE 'F110V-VARI' W_ROWNUM2 '(01)'   INTO FLD2
Regards
Greg Kern.

How to use bind variables in the following query

CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;

Don't duplicate threads: How to use bind variables in the following query

How to use bind variables in this procedure

Hi Experts,
How to use bind variables in this procedure for static queries.
PROCEDURE DELETE_MER_PROC (M_id IN NUMBER)
IS
BEGIN
V_date DATE;
SELECT PD_DATE INTO v_date FROM PD_MAINTAIN;
    DELETE FROM MER_CLEAR
    WHERE MER_DT < v_date
    AND ID = M_ID;
COMMIT;
END;
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
Please help me.
Thanks.

976208 wrote:
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
You cannot avoid hard parsing - as the 1st time a SQL statement (like the SELECT or DELETE statements in your code) is encountered, it does not reside in the server's Shared Pool, and needs to be added into the pool via a hard parse.
Bind variables does not prevent hard parsing. Hard parsing happens when the SQL statement (with or without bind variables) is a brand new statement encountered by the server.
Bind variables enables the same SQL cursor to be reused, by simply changing the bind variable value.
Not using bind variables means that each SQL statement is unique and not shareable - as the value is hardcoded into the statement and cannot be changed via a bind value. This typically means LOTS of different SQL statements (where the only difference is the changed value in the statement) are created - with each statement being a new statement not seen before in the Shared Pool and needing to be hard parsed.
One does not design one's code not to be hard parsed. There ALWAYS will be a hard parse in order to get a SQL statement into the Shared Pool. One designs one's code to REUSE cursors in the Shared Pool.

How to use Bind Variables in Essbase data control

Hi,
I am trying to use Bind Variables in MDX query while creating the Essbase Data Control. I have used the below query with the Bind Variable.. this query is working in Essbase admin console..but it is throwing error (*Invalid MDX Query)* while creating Essbase Datacontrol in JDeveloper.
MDX Query : SELECT {[Measures].Msr_2} ON COLUMNS, [Time].Children ON ROWS FROM cube
where ($name)
Could any body suggest me on how to use bind variables with Essbase Data control.
Thanks,
Swathi

Hello Swathi, can you please help me how you created Essbase DataControl? Also were you able to figure out this?
Thanks, Praveen.

How to use bind variable

Hi,
I have the below cursor 1 which is working already.For my requirement i want to use bind variable like second cursor.But its telling Bind Variable "p_col_list" is NOT DECLARED.Please any onehelp me on this.
How to use bind variable Here.
Cursor1:
DECLARE
emp_cv sys_refcursor;
iid NUMBER := 1;
i_sql varchar2(100);
p_col_list varchar2(2000) := 'aaa,bbb,ccc,ddd';
BEGIN
i_sql := 'select '''||REPLACE(p_col_list, ',', ''',''')||''' from dual '||CHR(10) ;
dbms_output.put_line(i_sql);
OPEN emp_cv FOR i_sql ;
END;
Cursor2:
DECLARE
emp_cv sys_refcursor;
iid NUMBER := 1;
i_sql varchar2(100);
p_col_list varchar2(2000) := 'aaa,bbb,ccc,ddd';
BEGIN
i_sql := 'select '''||REPLACE(:p_col_list, ',', ''',''')||''' from dual '||CHR(10) ;
dbms_output.put_line(i_sql);
OPEN emp_cv FOR i_sql using p_col_list;
END;

hello,
the reports parameterform capabilities are limited. if you want
to create sophisticated parameterforms, you should do that with
oracle forms or html forms.
regards,
the oracle reports team --pw

How to use ADF variables in C:when test?

I have a <af:iterator in my page fragment as follows
<af:iterator id="i1" value="#{queryModel.currentDescriptor.conjunctionCriterion.criterionList}" var="criterion" varStatus="vs">
Within this iterator, I want to make a decision absed on the index of the iterator. To do this test, I am using jstl as follows
<c:when test="${vs.index == '0' or vs.index == '2' or vs.index == '4'}">
This test is however always evaluating to false. I have tried cahnging my code using various combiantion as below ...
<c:when test="#{vs.index == '0' or vs.index == '2' or vs.index == '4'}">
<c:when test="${vs.index == 0 or vs.index == 2 or vs.index == 4}">
<c:when test="${vs.index == '0' || vs.index == '2' || vs.index == '4'}">
But nothign seems to be working fine.
Can some one help me with what I am doing wrong?
Thanks.

How to use ADF variables in <C:when test?

How to use a variable on columns using Oracle Data Integrator

How to use a variable in oracle Data Integrator expically on colums.

yes exactly,i selected update on new column,if i didn't select update on new colum then error is not coming regarding update.
but this time error is coming on "insert new rows".
java.lang.NullPointerException
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskPreTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source).
Can u please tell me what stpes i have to follow to solve this

How to use local variables to pass an image mask correctly

Similar Messages

Maybe you are looking for