How to use Mac Mini's and HD Freeview to capture raw TV satellite feeds in NEW ZEALAND?

Hello, this is my first post on this kind of forum - I am not very tech savy so go easy on me! Ideally I am hoping someone can offer some constructive advice.
I am part of a business that captures television off air as part of an ongoing contract. The system was implemented years ago and consists of 12 capture chains which are set-top cable boxes. They are a mix of Freeview NZ (free) and Sky TV (pay) - both on Satellite (Optus B1 I believe). The boxes are connected to Eye TV 250 boxes which are running through mini mac's (Mac OS X 10.5.4) that all have 1TB drives attached.
We are capturing two hour scheduled harvest stream blocks, and editing the individual programmes out manually, for an average of 15 hours - equivalent to 27GB, per capture chain, per day. While this system works ok it is very labour intensive and we would like to make the system more automated. There are also a few issues which I would really appreciate some guidance or suggestions on:
1/ Eye TV turns the digital signal from the decoder to analog and then back out to digital again because we are using S-video composite cables. Ideally we would like to capture HD Raw signal with little or no compression at all. We could upgrade to the Eye TV HD box but would prefer not to because.....
2/ ...Eye TV creates a proprietary file format (Eye TV specific file) that requires exportation to play in QT or VLC and while you can export as MP4 this takes a considerable amount of time. Up to 7 hours for 1 hour of capture - far to slow for our requirements. Therefore we export as a Mpeg Program Stream which slightly compresses the file and spits out an Mpeg 2. IDEALLY we would be creating H.264 files
3/ We can only export up to 2 hours, 15 minutes of capture (any more than that and the file goes dead (black) from that point on).
4/ Because we are in little old NZ, Eye TV (North American) won't pick up the local EPG (Electronic Programming Guide). This means all the scheduling has to be done manually and the meta data is not captured.
So ultimately we would like a system that captures television with little or no compression of the digital signal, in an H.264 format, with the New Zealand EPG (Electronic Programming Guide) available for both scheduling and metadata, that fits within a Mac system, is not Eye TV (or does not create software specific files) AND is cost effective.
Goodluck.

Hello & welcome to the foruns!
Maybe I can help with one facet...
Just a quick note for people who use Elgato’s EyeTV on their Macs in New Zealand. I’ve got an Automator script here that will fetch a TV schedule and load it into EyeTV. It takes care of deleting the file it downloads but you might need to open it (use the Automator program) to change where it downloads to.
EyeTV nz epg downloader
http://craig.stanton.net.nz/2010/05/04/eyetv-epg-for-nz-tv/

Similar Messages

How to use Mac Mini Server as NAT with only one port??

How to use Mac Mini Server as NAT with only one ethernet port??

But why did apple sell me this server that does NAT with one port? I don't get it.

How to use Mac Mini Server as media server

I recently purchased a Mac Mini Server and want to make it my media center accessed by my TV.
This is what I have on my network:
1x Mac Book Pro
3x Mac Books
4x iPhones (2x iPhone 4, 2x iPhone 3Gs)
1x iPad
1x 1TB external Drive
1x Time Capsule 500 Gig
I want to figure out a way to easily put all the Video/Photos and Music onto the Mac Mini Server from all phones, computers and iPad. I then want to be able to watch them from my TV.
I then want all the devices to be able to see the videos/photos from them in real time if needed.
Does anyone know how to accomplish this?
Thanks,
Darren

iCloud when available later this year will help a lot. However in the mean time the only option is to either
sync all the iPhones/iPads to their computers
copy all the libraries on to your Mac mini and then import them in to the master library
login via file sharing to each computer and then import them in to the master library
use FireWire Target Disk mode and import them in to the master library

How to use mac mini as external hard drive

trying to wipe an old mac mini and use as external hard drive for my iMac. Help!

Connect them with a FireWire or Thunderbolt cable and start up the Mac mini with the T key held down. If desired, use the Disk Utility in the /Applications/Utilities/ folder to erase it.
(86231)

How to use Mac Mini as web hosting server?

Hi,
I would like to use my mac mini as a web hosting server.
I have a few domains that I want to host on my mac mini.
How do I configure/setup the mac mini?
Best,
Leo

yes, a little. it's nice for people not used to setting up from source or doing tons of stuff in the command line. it installs like any other mac application & puts a nice control pane in system preferences. plus, you can set up for updates to keep everything current with patches.
I'm not sure how to handle the multiple domains, but whatever you find on apache that covers this should also or mostly apply to you too.

How to use Mac Mini & Mac Pro on same Cinema Displays?

Does it have a tool?

Hi,
you can use the display with both of the machines, however you require a Display Switch,

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

No signal to VGA monitor using Mac mini display to VGA adaptor and first time boot Mac mini

Just unpacked Mac mini and powered up using Mac mini to VGA display adaptor and VGA monitor. There is no signal to the monitor ( power is on).
How to see the display?

[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out.

How can I bandle Mac-mini Ipad and Iphone all with the same usser name and password

I alway's have problem with my ID AND PASSWORD also I want to bandle my mac-mini Ipad and Iphone with the same password and usser name how do I do tyhis?

Hola amigo
If you wish to use the same Apple ID for all your Apple devices then you need to set them up that way from the start. If you did not use the same Apple ID for them all then you would need to erase the iOS devices by returning them to the factory settings and starting over as if they were new.
However, content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to download or update your content bought with one Apple ID with a different Apple ID. So you would need to decide if your are abandoning extra Apple IDs that you may have created and the content that you acquired with that Apple ID.

Used Mac Mini and reinstalling OS X

I bought a used Mac mini (late 2009) with mountain lion installed. The previous owner didn't do a factory reset, so I attempted to by using OS X Utilities and reformatting the hard drive. I then attempted to reinstall OS X, but since I'm not the original registered owner, I can't get past the login dialog during the license verification stage. What should I do at this point?
Any suggestions would be greatly appreciated. Thanks!

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

You can bypass the password and wipe the drive and return to the original facory installation if the seller included the orginal install DVDs with the Mac mini. If not you will need a retail version of Mac OS X. To boot from the Install DVD restart the mini, immediately slip in the DVD and press and hold the C key.

I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial

I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial # be enough to show it is a mini server and under warrantee be enough to get it back?

If it's not listed in Purchases, check that it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 After that, go to Purchases and download OS X Server.
If you can't download it, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

Using mac mini nearly for 3yrs. From few weeks i feel electric stock over it surface and on keyboard too. I Tested with current tester it showed electric flow

Using mac mini nearly for 3yrs. From few weeks i feel electric stock over it surface and on keyboard too. I Tested with current tester it showed electric flow

H.Kiran wrote:
Thank First
I just plug it to any plug in my house or my friend house before powering mac mini there is electric stock near power button
I took it to apple care center strangely there i could't feel too much as in my house the service center guy recommend me to go with three pin power cable.
I checked my house ground with technician everything is fine
I have another system (Window pc) plugged to same ups no problem
When i plugged my Apple keyboard to mac mini i feel electric stock but when plugged to pc no electeic stock & i tested it with electric tester
I am asking what the result of testing it with the the tester was.

How to take Mac Mini 10.5 back to factory setting and reinstallation

How to take Mac Mini 10.5 back to factory setting and reinstallation. I have printed off the instructions - followed U tube but still cant get the start up to bring up the recovery menu - anyone please give me ideas. I have just purchased new Mac Mini Yosemite and want to give the other to my grandaughter - wondered if it had something to do with my keyboard which is a Logitch Classic Keyboard 200 - assistance please.
many thanks

thank yo so much Niel - I do still have the original DVD's and tried restarting whilst holding down the C key - I assumed the windows key is the option one on the logitech keyboard - will give it another go - many thanks.

How to use Mac Mini's and HD Freeview to capture raw TV satellite feeds in NEW ZEALAND?

Similar Messages

Maybe you are looking for