How to use Mail functionality OPTT in the Schema

Dear All,
We have a requirement where we need to send a mail to the Time Administrator if Time Evalution ends in Error. We have implemented the functionality OPTT MAIL option in the schema, but it is not sending the mail to Time Administrator. We have maintained the Time Administrator table T526 with the SAP ID.
Could anybody tell us, we have to do anyother configuration to enable the mail function
Thanks in Advance
Rajesh.S

Hello Folks,
Can anyone please let me know How to send a mail notification to the Time Administrator.
In the Schema, OPTT MAIL 1 has declared.
The Time Administrator is maintained in T526 table.
Do we need to do other than above to send mail.
Kindly let me know.
Note. The COLER function is not used in the Schema.

Similar Messages

How to use custom function for formatting the Line Chart Axes?

Hi...
I'm using a Line chart who's y axis value range from 0 to 50000. This is a number which it gets from it's dataProvider. I want to format this and show it as
$50,000
$40,000
$30,000
$20,000
$10,000
$0
instead of
50000
40000
30000
20000
10000
0
Here's my linechart code:
<mx:LineChart id="revTimeLineChart"
            width="100%" height="100%"
            showDataTips="true" >
            <mx:horizontalAxis>
               <mx:CategoryAxis id="lcCatAxis" categoryField="name"/>
            </mx:horizontalAxis>
            <mx:series>
               <mx:LineSeries id="ls" yField="revenue" displayName="Revenue" showDataEffect="{slideIn}"/>      (yField is what I want to format....)
            </mx:series>
</mx:LineChart>
Can you please let me know how can this be achieved?
Cheers!
Deepak

Hi,
You could do something like this,
http://www.codersrevolution.com/index.cfm/2008/10/14/Flex-Charting-Format-your-X-and-Y-Axi s
hope it helps!
Regards ,
Bhavika

How to use FPRINT32 function in MF cobol

Hi,
How to use FPRINT32 function to check the value of any buffer defined in MF cobol code.
When we tried, CALL FPRINT32 USING OUTPUT-FML
OUTPUT-FML is a buffer which is defined in our cobol code.
We are getting below error.
ld: 0711-224 WARNING: Duplicate symbol: p_xargc
ld: 0711-224 WARNING: Duplicate symbol: p_xargv
ld: 0711-224 WARNING: Duplicate symbol: .tpsvrdone
ld: 0711-224 WARNING: Duplicate symbol: .tpsvrinit
ld: 0711-224 WARNING: Duplicate symbol: TPSVRINIT
ld: 0711-224 WARNING: Duplicate symbol: .TPSVRINIT
ld: 0711-224 WARNING: Duplicate symbol: tpsvrinit
ld: 0711-224 WARNING: Duplicate symbol: tpsvrdone
ld: 0711-224 WARNING: Duplicate symbol: .userlog
ld: 0711-224 WARNING: Duplicate symbol: userlog
ld: 0711-224 WARNING: Duplicate symbol: p_xrcfg
ld: 0711-224 WARNING: Duplicate symbol: p_xrc
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
ld: 0711-317 ERROR: Undefined symbol: .FPRINT32
CMDTUX_CAT:1832: ERROR: can't execute cobcc -I$TUXDIR/include -L/lib -lpthreads -L/usr/local/opt/oracle/product/ostl133/lib/ -lclntsh -lrtl -lld -lm /lib/crt0_64.o -ldl -lc -lm -lpthreads -lodm -lbsd_r -lld -lperfstat -lm -lc_r -lpthreads /usr/local/opt/oracle/product/ostl133/precomp/lib/cobsqlintf.o /usr/local/opt/oracle/product/ostl133/lib/libclntsh.a -C linkcount=1024 -o BS-f804a.c -L${TUXDIR}/lib TPSVRINIT.o -brtl -qstaticinline -lcobatmis -ltux -lbuft -lfml -lfml32 -lengine -lpthread
Please help in this regard,
Thanks

Hi,
As far as I know there is no FPRINT32 function in the Tuxedo COBOL interface.
The ATMI COBOL Function Reference for the latest Tuxedo 11.1.1.2.0 release at
http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rf3cbl/rf3cbl.html shows FINIT, FINIT32, FVFTOS, FVFTOS32, FVSTOF, and FVSTOF32 as the only supported COBOL interface functions related to FML.
COBOL is better suited to dealing with the fixed record structure of views than with the variable record format of FML buffers. The COBOL interface offers functions to initialize and FML buffer and to convert an FML buffer to and from a VIEW so that preexisting services taking FML buffers as input or output parameters can be called, but the expectation is that the COBOL program will conver the FML buffer to a VIEW before accessing it.
It is possible to call the Tuxedo C interface Fprint32() function from COBOL using standard interlanguage calling conventions. Also, you may want to check with other developers on your project to see if someone may have already implemented such a function.
Regards,
Ed

How to use SQL functions in the queries

hey guys i wanna know how to use SQL functions in the queries is it possible or not .

Hi,
Wat exactly that set values are?
those from sql query?
How to use count():
The COUNT() function returns the number of rows that matches a specified criteria.
SQL COUNT(column_name) Syntax
The COUNT(column_name) function returns the number of values (NULL values will not be counted) of the specified column:
SELECT COUNT(column_name) FROM table_name
SQL COUNT(*) Syntax
The COUNT(*) function returns the number of records in a table:
SELECT COUNT(*) FROM table_name
SQL COUNT(DISTINCT column_name) Syntax
The COUNT(DISTINCT column_name) function returns the number of distinct values of the specified column:
SELECT COUNT(DISTINCT column_name) FROM table_name
The IN function helps reduce the need to use multiple OR conditions.
The syntax for the IN function is:
SELECT columns
FROM tables
WHERE column1 in (value1, value2, .... value_n);

How to use SO_OBJECT_SEND function module

Hi friends,
how to use SO_OBJECT_SEND function module in 4.0B Server .

hi
good
check this code
REPORT ZTSAPMAIL.
DATA: X_OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: BEGIN OF X_OBJECT_HD_CHANGE.
INCLUDE STRUCTURE SOOD1.
DATA: END OF X_OBJECT_HD_CHANGE.
DATA: BEGIN OF X_OBJCONT OCCURS 10.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJCONT.
DATA: BEGIN OF X_OBJHEAD OCCURS 0.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJHEAD.
DATA: BEGIN OF RAW_HEAD.
INCLUDE STRUCTURE SORH.
DATA: END OF RAW_HEAD.
DATA: BEGIN OF X_RECEIVERS OCCURS 0.
INCLUDE STRUCTURE SOOS1.
DATA: END OF X_RECEIVERS.
PARAMETERS: RECEIVER LIKE X_RECEIVERS-RECNAM. " Name
*BUILD MESSAGE HEADER
MOVE 'Sort field goes here' TO X_OBJECT_HD_CHANGE-OBJSRT. " Sort field
MOVE 'Name of the object goes here' TO X_OBJECT_HD_CHANGE-OBJNAM. " Name
MOVE 'Document title goes here' TO X_OBJECT_HD_CHANGE-OBJDES. " Title
MOVE 'F' TO X_OBJECT_HD_CHANGE-OBJSNS. " Functional OBJECT
MOVE 'E' TO X_OBJECT_HD_CHANGE-OBJLA. " Language
Object type of the new document
MOVE 'RAW' TO X_OBJECT_TYPE.
CLEAR X_OBJCONT.
MOVE 'Contents of mail' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
CLEAR X_OBJCONT-LINE. APPEND X_OBJCONT.
MOVE 'More contents' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
MOVE 'Still more contents'
to x_objcont-line.
APPEND X_OBJCONT.
MOVE ' ' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
Specific header (Dependent on the object type, here RAW)
REFRESH X_OBJHEAD.
DESCRIBE TABLE X_OBJCONT LINES RAW_HEAD-RAWSIZ.
MOVE RAW_HEAD TO X_OBJHEAD.
APPEND X_OBJHEAD.
*RECEIVERS table
CLEAR X_RECEIVERS.
REFRESH X_RECEIVERS.
MOVE RECEIVER TO X_RECEIVERS-RECNAM. " Name
MOVE 'B' TO X_RECEIVERS-RECESC. " Receiver type
MOVE 'X' TO X_RECEIVERS-SNDCP. " Send as a copy
MOVE 'X' TO X_RECEIVERS-SNDEX. " EXPRESS DOCUMENT
APPEND X_RECEIVERS.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = 'OUTBOX'
forwarder = x_forwarder
object_fl_change = x_object_fl_change
OBJECT_HD_CHANGE = X_OBJECT_HD_CHANGE
object_id = x_object_id
OBJECT_TYPE = X_OBJECT_TYPE
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
store_flag = x_store_flag
importing
object_id_new = x_object_id_new
sent_to_all = x_sent_to_all "May need to use
TABLES
OBJCONT = X_OBJCONT
OBJHEAD = X_OBJHEAD
objpara = x_objpara
objparb = x_objparb
RECEIVERS = X_RECEIVERS.
reward point if hlepful.
thanks
mrutyun^

How to use standard function keys as custom keys

how to use standard function keys as custom keys.
i have encountered that problem while developing a screen, there i'm supposed to use standard function key F2 ( which actually meant for choose) for clearing the screen fields where the cursor is present and f1 for saving data that entered in screen fields, etc...
kindly help me out.

Hi ,
Solution to use SAP reserve function keys F1 .. F4 (mostly this requirement comes up for RF screens) can be acheived by assigning your new Function code using the Menu path Utilities --> F key Consistency in the Menu Painter (SE41) . Once you assign your cutom function code to the standard Fn keys the only remaining step is to make sure that you set a curson on any of the field on sceen by using the Key Word "SET CURSOR" .
If you dont use the key word SET CURSOR in the PBO of the screen then you might not see any response for F4.
Thanks

How to use "Rank" function in Oracle?

I need to display Top 15 records by using rank function.
Here is my query...I need to pull top 15 FAQ's using the below query.. How can I use RANK function to display the Top 15 FAQ"s in the list.
Select distinct SUb1.FAQ,Sub1.FAQ_Hits,GU.display_Name_FMLS as displayname,ev.ParentLinkrecordid,ev.userid from User GU
Join Event ev
ON LOWER (ev.userid) IN (LOWER (GU.lanid), LOWER (Gu.racfid))
Join (Select distinct sm.stem as FAQ,Sum(ev.Eventresults) as FAQ_Hits,ev.ParentLinkrecordid as Topic_ID from Event ev
Join SubjectMatter sm
ON (TO_CHAR (sm.smrecordid) = ev.eventdetail1) AND ev.eventdetail1 IS NOT NULL AND sm.smtype = 1
Where (Upper(ev.eventsubtype) in (Upper('FAQ'),Upper('OPENFAQ')))
AND TO_DATE (eventdatetime, 'yyyy-mm-dd hh24:mi:ss') >= TO_DATE ('20100601', 'yyyymmdd')
and TO_DATE (eventdatetime, 'yyyy-mm-dd hh24:mi:ss') <= TO_DATE ('20100831', 'yyyymmdd')
Group by sm.stem,ev.Parentlinkrecordid
order by FAQ )sub1
ON Sub1.Topic_ID = ev.ParentLinkrecordid)

A few bits that I noticed in the query ...
in (Upper('FAQ'),Upper('OPENFAQ'))1) Do you really a upper for a string which is already in upper case.
Select distinct sm.stem as FAQ,Sum(ev.Eventresults) as FAQ_Hits,ev.ParentLinkrecordid as Topic_ID2) Do you need a distinct when you are using a GROUP function viz. SUM ?
You rank query is as follows, I am not very good at the ANSI style JOIN so changed it slightly ... :-)
Also notice the usage rank function in the "sub1" query.
select distinct sub1.faq,
                sub1.faq_hits,
                gu.display_name_fmls as displayname,
                ev.parentlinkrecordid,
                ev.userid
from user gu, event ev,
(select rank() over (order by sum(ev.eventresults) desc) rnk,
          sum(ev.eventresults) as faq_hits,
          sm.stem as faq,
          ev.parentlinkrecordid as topic_id
     from event ev, subjectmatter sm
    where (to_char(sm.smrecordid) = ev.eventdetail1)
      and ev.eventdetail1 is not null
      and sm.smtype = 1
      AND upper(ev.eventsubtype) in ('FAQ', 'OPENFAQ')
      and to_date(eventdatetime, 'yyyy-mm-dd hh24:mi:ss') >= to_date('20100601', 'yyyymmdd')
      and to_date(eventdatetime, 'yyyy-mm-dd hh24:mi:ss') <= to_date('20100831', 'yyyymmdd')
    group by sm.stem, ev.parentlinkrecordid
    order by faq) sub1
where lower(ev.userid) in (lower(gu.lanid), lower(gu.racfid))
and sub1.topic_id = ev.parentlinkrecordid)
and sub1.rnk <= 15;Like mentioned above, some sample data would have helped.

How to use this function in crm5.2 - /CEM/ENT_IMPORT_DATAFROMEXCEL

i am having a problem regarding how to use this function to import values from an excel sheet.
in call funtion what to specify at place of ct_ent_action = ?
CALL FUNCTION '/CEM/ENT_IMPORT_DATAFROMEXCEL'
CHANGING
    CT_ENT_ACTION       =
EXCEPTIONS
FILE_ERROR          = 1
IMPORT_ERROR        = 2
OTHERS              = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi
The use of Standard Parner functions are as follows:
1. Ordering Address (OA): The PO will be sent this vendor and not the main vendor.
2. Goods Supplier (WL): In case of return deliveries, Goods will be returned to thsi vendor's address
3. Invoicing party (RS): The payment will be made to this vendor.
Hope this clarifies.
Thansk

How to use these function modules

Hi all,
can anyone help that how to use these Function modules to update the status of a task, what are all the inputs i required to proceed
1. FC_USER_AUTHORITY_CHECK
<b>2. FC_USER_STATUS_CHECK
3. FC_USER_STATUS_UPDATE</b>
4. FC_USER_GET_CACTI
5. FC_USER_CHECK_FOR_OUTPUT
Thanks in Advance
Ganesh

Hi Rob,
thanks for ur reply,
but they are not clear what they are meant to be, I understood there are some flags needed to run the Function Modules 2 & 3 which are in bold...
but how do i populate them.. i am not getting that..
thanks
ganesh

How to use BAPI_MATERIAL_AVAILABILITY Function Module at batch level?

How to use BAPI_MATERIAL_AVAILABILITY FM to check material available at batch level?
And another question is what's the meaning of 'CHECK_RULE' in this FM. Thanks!

Field name : PRREG
fcheck more details on f1 help...
check_group defines the checking procedure to be used for availability check in individual applications.
along with the checkg group, checking rule specifies the final procedure for chkg..
eg:
ST for stock transport order
AQ for SD order project srock
also chk this help doc.
http://help.sap.com/saphelp_470/helpdata/en/cf/70124adf2d11d1b55e0000e82de178/content.htm
search the forum for sample code..
How to use BAPI_MATERIAL_AVAILABILITY Function Module....

How to use BAPI_PTIMEOVERVIEW_GET function module

hi experts ,
                   can any body explain how to use this FM . what are the inputs to be passed t and from which table ? .whether and table is to be passed in table parameters .
kindly help me for this problem .useful information will be appreciated
thanks
chinnaiya

BAPI_PTIMEOVERVIEW_GET
Just pass in the a From date and To date, and then in tables, pass in a employee no, in EMPLOYEES field.thats all, execute. Any prompts you get to enter a value for anything just click save without entering any values. You will get data returned in Result table of TIMEOVERVIEW.
You can find the Documentation of this, when you go into display mode of this Bapi, you will find function module documentation on top right hand side of the screen. in any case i am pasting it below.
Functionality
    This method defines a time data overview for employees.
    The time data determined can be used as a value guide for recording in
    another system (such as in a time sheet or an external system).
Notes
    An "asynchronous access" to R/3 Time Management data determined by the
    method PTimeOverview.Replicate specifies the employees for whom a time
    data overview is to be created.
    A "sysnchronous access" to R/3 Time Management data determined by the
    time period entered and the external application specifies the employees
    for whom a time data overview is to be created.
    The employees selected are returned in the EMPLOYEES parameter. A list
    of the time types for these employees also to be included in the
    overview is returned in the TIMETYPES parameter.
    The time data overviews are returned in the TIMEOVERVIEW parameter.
    The selected time types and the applicable number of hours are returned
    in the TIMETYPEVALUES parameter.
    The overviews are transferred to the other systems by the method
    PTimeOverview.SaveReplica.
Parameters
    FROMDATE
    TODATE
    EXTAPPLICATION
    EMPLOYEES
    TIMETYPES
    TIMEOVERVIEW
    TIMETYPEVALUES
    RETURN
Exceptions

How to use BAPI_MATERIAL_AVAILABILITY Function Module....

Hi Experts,
I want to know actual free available quantity (ATP Qty.) for mass materials,
How to use BAPI_MATERIAL_AVAILABILITY function module ?
I have select all material from MARA and inserted in itab.
LOOP AT ITAB.
CALL FUNCTION 'BAPI_MATERIAL_AVAILABILITY'
EXPORTING
    PLANT                    =
    MATERIAL                 =
    UNIT                     =
CHECK_RULE               =
STGE_LOC                 =
BATCH                    =
CUSTOMER                 =
DOC_NUMBER               =
ITM_NUMBER               =
WBS_ELEM                 =
STOCK_IND                =
DEC_FOR_ROUNDING         =
DEC_FOR_ROUNDING_X       =
READ_ATP_LOCK            =
READ_ATP_LOCK_X          =
IMPORTING
ENDLEADTME               =
AV_QTY_PLT               =
DIALOGFLAG               =
RETURN                   =
TABLES
    WMDVSX                   =
    WMDVEX                   =
I dont know how to use it.
pl. guide us.
Yusuf

Hi,
       data: iwmdvsx type table of bapiwmdvs with header line,
       iwmdvex type table of bapiwmdve with header line.
parameters: p_matnr type mara-matnr,
            p_werks type marc-werks,
            p_meins type mara-meins.
call function 'BAPI_MATERIAL_AVAILABILITY'
exporting
    plant            = p_werks
    material         = p_matnr
    unit             = p_meins
CHECK_RULE       =
STGE_LOC         =
BATCH            =
CUSTOMER         =
DOC_NUMBER       =
ITM_NUMBER       =
WBS_ELEM         =
STOCK_IND        =
IMPORTING
ENDLEADTME       =
AV_QTY_PLT       =
DIALOGFLAG       =
RETURN           =
tables
    wmdvsx           = iwmdvsx
    wmdvex           = iwmdvex.
check sy-subrc = 0.
Text
ATP information
Functionality
Using this function module, you can determine the receipt quantity still available for a particular material in a certain plant according to ATP logic (MRPII).
The availability check is carried out on transferring the material number, the plant and the input table (WMDVSX). The scope of the check, that is, which stocks, receipts and issues are to be included in the check is defined by the combination of checking group (material master) and cheking rule. In the function module, the system uses the checking rule defined in Sales & Distribution (A). You can overrule this checking rule by using an interface or a user-exit (exit_saplw61v_001). A similar procedure is also valid for the plant parameters. The customer number in the user-exit means that the plant selection can be controlled via the customer. If no plant parameters are given via the interface, the system uses the parameter 'WRK' saved in the user's fixed values.
The results of the availability check are recorded in the output table (WMDVEX). This table contains dates and available receipt quantities (ATP quantities). The results of the check depends on the following entries:
If no date and no quantity is transferred, the system displays the ATP situation from today's date into the future as the result.
If only a date and no quantity is transferred, the system displays the ATP situation from the corresponding date as the result.
If both a date and a quantity are transferred, the system calculates the availability situation for the quantity specified.
In the last two cases, the parameter 'DIALOGFLAG' is supplied. This can result in the following:
' ' (blank)   <=> quantity completely available
'X'           <=> only partial quantity available or not available at
                  all
'N'           <=> Material not included in the availability check
                  (Material not relevant to the availability check)
The system also displays the end of the replenishment lead time (ENDLEADTME).
regards

How to use ADD_MAINTAIN_COMPLETE function module

how to use ADD_MAINTAIN_COMPLETE function module
please help me.
by using the above function module
how can i change the ADRT table REMARK field

how to use ADD_MAINTAIN_COMPLETE function module
please help me.
by using the above function module
how can i change the ADRT table REMARK field

How to use search function in ipod nano 7th generation

how to use search function in ipod nano 7th generation?
Cheers thanks.

There is no search function. If there was, it would be mentioned in the iPod's User Guide.
7G Nano User Guide
B-rock

How to use decode function

Hello Friends,
I have a query that has different columns and I am not sure what the data type of each column is ...
I want to use decode function which displays the following if the value of the column is like this ..
if the value of column is -714E ie -700000000000000 then display as .A
if the value of column is -814E ie -800000000000000 then display as .B
NOTE ; don't know which column is having the value - and i don't know the data type of the column is ..
got to use the decode function for all the columns selected ..
I want to use decode function pls let me know how to write for this kind of requirement.
appreciate your help in this rgds.
thanks/kumar

Dear Sir / Madam,
Thanks for your understanding.
Right now I am facing a unique problem.
I am using decode function in a select statement. The columns are dynamic some columns are of type number and some are varchar datatypes. I want to apply decode function for every column irrespective of datatype.
What i am finding difficult is if the column is a number datatype , the decode funciton is working good but if the column datatype is varchar or char datatype then i am getting ..
here's the decode function..
decode (CHAI.EVNDRIVE,
-800000000000000,'.A',
-700000000000000, '.B',
-600000000000000 ,'.C',
-500000000000000 , '.D',
-400000000000000 , '.E',
-300000000000000 , '.F',
-200000000000000, '.G',
-100000000000000 , '.H',
-1000000000, '.R' ,CHAI.EVNDRIVE ) EVNDRIVE
report error:
ORA-01722: invalid number
pls let me know how to over come this kind of scenario.
is their a way to find whether the column datatype is number or char , so that i can check the column datatype before the decode funciton is applied ..
thanks ..
kumar

How to use Mail functionality OPTT in the Schema

Similar Messages

Maybe you are looking for