How to use management chain and escalation hierarchies with LDAP
Hi,
I have experienced now with the management chain pattern and escalation feature. I have used the standard file-based security provider (JAZN and user-properties.xml). You can easily define a user hierarchy using the user-properties.xml file to define the escalation path and the management chain in terms of hierarchy levels.
In a production environment in most cases you will use LDAP as the security provider. I wonder if it is possible to define such an user hierarchy in LDAP. I now you can create a role-based hierarchy, but in cases this will be to much and you need user based hierarchy.
Another issue is that you can also define a highest level op approval. Hower you onlyonly define manager/director/ceo, used in the user-properties.xml file. How can you tell jdeveloper to use other custom roles?
Does anyone has experience of suggentions om this issue?
Kind regards,
-Tom
Tom,
I can address parts of your question, please see below:
How can you tell jdeveloper to use other custom roles?JDeveloper picks up users from the Integration Server connection. So, if the server is configured with the LDAP configured server, you will see users and groups from that registry. JDeveloper (the human task editor dialog) does not go directly against the LDAP.
I wonder if it is possible to define such an user hierarchy in LDAPYes. That is the way it has been designed.
I now you can create a role-based hierarchy, but in cases this will
be to much and you need user based hierarchy.Making a user specific hierarchy has problems - what if a user leaves the company? The role based hierarchies solve this problem very well. May be I misunderstand your question.
I will have a colleague, who works on identity management, look at your question.
Regards,
Sidda.
Similar Messages
-
How to use both wired and wireless connection with static addresses
Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy. -
How to Use signal In and Signal Out with Respect to this Question
Hi,
I have a requirement where i have to change the data of the employee.
For that i am first searching for the employee using a RFC from R/3.
After searching i call another RFC for udating the Data.
The Data is updated successfully in the R/3, but its not reflecting in the Iview.
Can I use the Portal Eventing Mechansim using Signal In and Signal Out.
If yes then please forward me the example or model file to me on
dhruvpradipshah at gmail dot com
Thanks & Regards,
Dhruv ShahDhruv,
You can update the status by passing the return message or the output of the BAPi / RFC in a table or a form in the iview.
Regards,
Ahmed Salah -
How to use external libraries and JAR files with OpenScript
Hello.
I am trying to include ApachePOI, JODATime, and Javamail in my scripts to handle different aspects of our automated performance tests.
I followed the documentation for Eclipse to be allowed to utilize these external libraries, however, when I attempt to run my tests the classes and methods that are being imported, show up with errors saying that they do not exist.
I think perhaps that I am using them incorrectly. I cannot see them as script assets, package assets, or project assets using the properties for these items. An error pops up and says those screens are not displaying correctly or display incorrect information.
If anyone can provide guidance on using these items, that would be great. Right now I'm trying to include them as "previously exported scripts" but I'm not sure that method will work.
Any advice is appreciated.
Thanks.
--tiffHi Tiff
For OpenScript 9.* there is an out of the box solution for that, all you need to do in OpenScript go to:
Script -> Script Properties -> Script Assets -> Add -> jar File ....
And that is it.
Alex -
I am trying to configure Mainstage to input my own guitar and add a backing track from the library or a loop but, I can figure out how to open or add the tracks I've downloaded. Any help would be great
did you try the PlayBack preset/template?
once you open the PlayBack plug-in you just load the tracks from the plug-in's menu. -
How to use listitem control and listbox control with js in indesign?
Anyone can give me some examples?
Is this what you need?
getDialog = function() {
var w = new Window( "dialog", "Example" );
w.listBox = w.add( "listbox" );
w.listBox.preferredSize = [ 200, 300 ];
var item1 = w.listBox.add( "item", "Item 1" );
var item2 = w.listBox.add( "item", "Item 2" );
item2.selected = true;
w.listBox.onChange = function() {
if ( this.selection != null ) {
// this.selection is a ListItem
var g = w.add( "group" );
w.okButton = g.add( "button", undefined, "OK" );
w.okButton.onClick = function() {
this.window.close( 1 );
w.canButton = g.add( "button", undefined, "Cancel" );
w.canButton.onClick = function() {
this.window.close( 2 );
return w;
var w = getDialog();
w.center();
if ( w.show() == 1 ) {
var sel = w.listBox.selection; // sel is now a ListItem
if ( sel != null ) {
// do whatever you need with the item
Note this code as not been tested at all. But you should be able to get the idea.
Regards
Bob -
How to create process chains,and how to use process like and or xor
Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik -
How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013
How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013 there's two plugs do I use both for the safety to work or I just one ? Thanks sorry new macbook air 2013 was given to my daughter fir her 18th bday 2 days ago by my brother
No, the one is just an extension cord, just use the 45W charger with its attached thin cord and connect the magnetic magsafe to to the connector on the back left of the macbook Air for use and charging it
-
Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel
I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
<af:document title="untitled1.jsf" id="d1">
<af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
<af:resource type="javascript" source="resources/js/home.js"/>
<af:messages id="m1"/>
<af:form id="f1">
<af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
<af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
<af:noteWindow id="popupWindow">
<af:panelFormLayout id="pfl2">
<af:panelLabelAndMessage label="Task id" id="plam5">
<af:outputText value="#{homeBean.taskId1}" id="ot64"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Start Location Name" id="plam6">
<af:outputText value="#{homeBean.startLocation}" id="ot7"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Stop Location Name" id="plam7">
<af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="tasktype" id="pla2m7">
<af:outputText value="#{homeBean.taskType}" id="ot9"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</af:noteWindow>
</af:popup>
<af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
<dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
showMenuBar="false" showToolbar="false" iconPlacement="left"
showTasksAsDailyBar="false">
<f:facet name="major">
<dvt:timeAxis scale="days" id="ta1"/>
</f:facet>
<f:facet name="minor">
<dvt:timeAxis scale="hours" id="ta2"/>
</f:facet>
<f:facet name="nodeStamp">
<af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
<af:outputText value="#{row.PersonId}" id="ot1">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
</af:outputText>
</af:column>
</f:facet>
</dvt:schedulingGantt>
</af:form>
</af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
$("div[et]").live('mouseover', function (e) {
$('#cb1').css("position", 'absolute');
$('#cb1').css("top", e.pageY-4);
$('#cb1').css("left", e.pageX);
var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
var element = AdfPage.PAGE.findComponent("f1");
var taskIdToPass = null;
if ($(this).attr("tid") !=undefined) {
taskIdToPass = $(this).attr('tid').toString();
} else {
taskIdToPass = $(this).parent().attr('tid').toString();
var param = { taskId : taskIdToPass };
AdfCustomEvent.queue(element, "jsServerListener", param, true);
if (!popup.isPopupVisible()) {
var hints = {};
hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
popup.show(hints);
}).live("mouseout", function () {
var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
private RichPopup popup;
private String taskId1;
private String startLocation;
private String stopLocation;
private long taskId;
private String taskType;
public HomeBean() {
super();
public void serverEventHandler(ClientEvent clientEvent) {
String taskIdString = clientEvent.getParameters().get("taskId").toString();
this.taskId = Long.parseLong(taskIdString);
DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
ApplicationModule am = dc1.getApplicationModule();
ViewObject vo = am.findViewObject("PdTrfDayView1");
RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
Row row = rows[0];
this.taskId1 = row.getAttribute("PdTrfDayId").toString();
this.startLocation = row.getAttribute("StartLocation").toString();
this.stopLocation = row.getAttribute("StopLocation").toString();
this.taskType = row.getAttribute ("PdTrfTypeId").toString();
RichPopup.PopupHints ph = new RichPopup.PopupHints();
vo.closeRowSetIterator();
public long getTaskId() {
return taskId;
public void setPopup(RichPopup popup) {
this.popup = popup;
public RichPopup getPopup() {
return popup;
public String getTaskId1() {
return taskId1;
public String getStartLocation() {
return startLocation;
public String getStopLocation() {
return stopLocation;
public String getTaskType() {
return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AMHi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}" -
How to use direct select and insert or load to speedup the process instead of cursur
Hi friends,
I have stored procedure .In SP i am using cursur to load data from Parent to several child table.
I have attached the script with this message.
And my problem is how to use direct select and insert or load to speedup the process instead of cursur.
Can any one please suggest me how to change this scripts pls.
USE [IconicMarketing]
GO
/****** Object: StoredProcedure [dbo].[SP_DMS_INVENTORY] Script Date: 3/6/2015 3:34:03 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <ARUN,NAGARAJ>
-- Create date: <11/21/2014>
-- Description: <STORED PROCEDURE FOR DMS_INVENTORY>
-- =============================================
ALTER PROCEDURE [dbo].[SP_DMS_INVENTORY]
@Specific_Date varchar(20) ,
@DealerNum Varchar(6),
@Date_Daily varchar(50)
AS
BEGIN
SET NOCOUNT ON;
--==========================================================================
-- INVENTORY_CURSUR
--==========================================================================
DECLARE
@FileType varchar(50),
@ACDealerID varchar(50),
@ClientDealerID varchar(50),
@DMSType varchar(50),
@StockNumber varchar(50),
@InventoryDate datetime ,
@StockType varchar(100),
@DMSStatus varchar(50),
@InvoicePrice numeric(18, 2),
@CostPack varchar(50),
@SalesCost numeric(18, 2),
@HoldbackAmount numeric(18, 2),
@ListPrice numeric(18, 2),
@MSRP varchar(max),
@LotLocation varchar(50),
@TagLine varchar(max),
@Certification varchar(max),
@CertificationNumber varchar(max),
@VehicleVIN varchar(50),
@VehicleYear bigint ,
@VehicleMake varchar(50),
@VehicleModel varchar(50),
@VehicleModelCode varchar(50),
@VehicleTrim varchar(50),
@VehicleSubTrimLevel varchar(max),
@Classification varchar(max),
@TypeCode varchar(100),
@VehicleMileage bigint ,
@EngineCylinderCount varchar(10) ,
@TransmissionType varchar(50),
@VehicleExteriorColor varchar(50),
@VehicleInteriorColor varchar(50),
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max),
@InteriorColorCode varchar(50),
@ExteriorColorCode varchar(50),
@PackageCode varchar(50),
@CodedCost varchar(50),
@Air varchar(100),
@OrderType varchar(max),
@AgeDays bigint ,
@OutstandingRO varchar(50),
@DlrAccessoryRetail varchar(50),
@DlrAccessoryCost varchar(max),
@DlrAccessoryDesc varchar(max),
@ModelDesc varchar(50),
@Memo1 varchar(1000),
@Memo2 varchar(max),
@Weight varchar(max),
@FloorPlan numeric(18, 2),
@Purchaser varchar(max),
@PurchasedFrom varchar(max),
@InternetPrice varchar(50),
@InventoryAcctDollar numeric(18, 2),
@VehicleType varchar(50),
@DealerAccessoryCode varchar(50),
@AllInventoryAcctDollar numeric(18, 2),
@BestPrice varchar(50),
@InStock bigint ,
@AccountingMake varchar(50),
@GasDiesel varchar(max),
@BookValue varchar(10),
@FactoryAccessoryDescription varchar(max),
@TotalReturn varchar(10),
@TotalCost varchar(10),
@SS varchar(max),
@VehicleBody varchar(max),
@StandardEquipment varchar(max),
@Account varchar(max),
@CalculatedPrice varchar(10),
@OriginalCost varchar(10),
@AccessoryCore varchar(10),
@OtherDollar varchar(10),
@PrimaryBookValue varchar(10),
@AmountDue varchar(10),
@LicenseFee varchar(10),
@ICompany varchar(max),
@InvenAcct varchar(max),
@Field23 varchar(max),
@Field24 varchar(max),
@SalesCode bigint,
@BaseRetail varchar(10),
@BaseInvAmt varchar(10),
@CommPrice varchar(10),
@Price1 varchar(10),
@Price2 varchar(10),
@StickerPrice varchar(10),
@TotInvAmt varchar(10),
@OptRetail varchar(max),
@OptInvAmt varchar(10),
@OptCost varchar(10),
@Options1 varchar(max),
@Category varchar(max),
@Description varchar(max),
@Engine varchar(max),
@ModelType varchar(max),
@FTCode varchar(max),
@Wholesale varchar(max),
@Retail varchar(max),
@Draft varchar(max),
@myerror varchar(500),
@Inventoryid int,
@errornumber int,
@errorseverity varchar(500),
@errortable varchar(50),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000),
@Invt_Id int,
@flatfile_createddate datetime,
@FtpDate date,
@Inv_cur varchar(1000),
@S_Year varchar(4),
@S_Month varchar(2),
@S_Date varchar(2),
@Date_Specfic varchar(50),
@Param_list nvarchar(max),
@Daily_Date Varchar(50);
--====================================================================================
--DECLARE CURSUR FOR SPECIFIC DATE (OR) DEALER-ID WITH SPECIFIC DATE (OR) CURRENT DATE
--====================================================================================
set @Date_Specfic = Substring(@Specific_Date,1,4) +'-'+Substring(@Specific_Date,5,2)+'-'+Substring(@Specific_Date,7,2);
set @Daily_Date = SUBSTRING(@Date_Daily,14,4) + '-' + SUBSTRING(@Date_Daily,18,2)+ '-' + SUBSTRING(@date_Daily,20,2)
IF @Daily_Date IS NOT NULL
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where
CONVERT (date,flatfile_createddate) = CONVERT (date,GETDATE()) order by flatfile_createddate;
END
Else
BEGIN
if (@Date_Specfic IS NOT NULL AND @DealerNum != '?????')
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic AND ACDealerID='ACTEST' + @DealerNum;
END
ELSE
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic;
END
END
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO
@FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
WHILE @@FETCH_STATUS = 0
BEGIN
--==========================================================================
-- INSERT INTO INVENTORY (PARENT TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY]
DMSDealerID,
StockNumber,
DMSType,
InventoryDate,
FtpDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate,@FtpDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
-- PRINT @errornumber;
-- PRINT @errorseverity;
-- PRINT @errortable;
-- PRINT @errorprocedure;
-- PRINT @errorline;
-- PRINT @errormessage;
-- PRINT @errorstate;
set @myerror = @@ERROR;
-- This -- PRINT statement -- PRINTs 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
-- PRINT N'Error = ' + @myerror;
set @Inventoryid = scope_identity();
-- PRINT @Inventoryid;
--==========================================================================
-- INSERT INTO DMS_INVENTORY_DETAILS (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_DETAILS]
DMSInventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode,
FtpDate
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errorstate = ERROR_STATE(),
@errortable = 'DMS_INVENTORY_DETAILS',
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXECUTE [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_AMOUNT (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_AMOUNT]
DMSInventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail,
FtpDate
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_AMOUNT',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_VEHICLE (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_VEHICLE]
DMSInventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage,
FtpDate,
EngineCylinderCount
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage,
@FtpDate,
@EngineCylinderCount
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_VEHICLE',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- MOVE CURSUR TO NEXT RECORD
--==========================================================================
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
SET ANSI_PADDING OFF
END
Arunraj KumarThank you.
And another question if the data is already there in the child table if i try to load alone it must delete the old data in the child tablee and need to get load the new data and
How to do this ?
Arunraj Kumar
You can do that with an IF EXISTS condition
IF EXISTS (SELECT 1
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
DELETE t
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
INSERT INTO YourChildTable
where Bkey1,Bkey2 etc forms the business key of the table
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
How to use radioButton(s) and image controls on windows phone 8.1
how to use radioButton(s) and image controls on windows phone 8.1
Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to use SQL OVER and PARTITION BY in OBIEE Expression Builder??
Hi there,
I want to create a new logical coulmn with the following SQL query.
SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE )/SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C )
How to use the OVER and PARTITION BY in OBIEE Expression Builder??
Thanks in Advancehi bipin,
We cant use by in Expression builder(rpd) .But use the same formula like this in Fx of answers
SUM(Inventory Detail.Qty) OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C,Inventory Detail.D,MyDATE )/SUM(Inventory Detail.Qty) >OVER(PARTITION BY Inventory Detail.A,Inventory Detail.B,Item.C )SUM(Inventory Detail.Qty by Detail,ITEM,Mydate)/SUM(qty by detail,item)
First check the numerator whether it was giving correct results or not then go with denominator
compare the results with sql that u have
Let me know if that does work
thanks,
saichand.v
Edited by: Saichand Varanasi on Jul 27, 2010 9:27 PM
Edited by: Saichand Varanasi on Jul 27, 2010 9:28 PM -
How to use the validations and exceptions in BPEL
Hi,
How to use the validations and exceptions in BPEL.
pls provide one sample example to give the exceptions and validations in BPELHi,
For example you can create a simple BPEL Process and you can throw an error during running process. If input data is not valid and format is not correct you can throw error using throw activity and using catch activity you can catch particular error. The catch-all will handle all the error occurred with the scope.
you can also refer faulthandling section in the link for more information related to exception handling.
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/faults.htm#sthref1188
Regards,
Deepa -
How to use the eventing and databag with a WAS 6.20 ?
How to use the eventing and databag with a WAS 6.20 ?
Is what there is a good guide for these services?
Thank'sIn the raise event you can pass the value
like below.
<SCRIPT>
function raiseEvt(value1){
if(window.document.domain == window.location.hostname){
if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
// alert('tree domain'+document.domain);
</SCRIPT>
and in the
subscribe event you can get the values like below.
<script language="javascript">
if(window.document.domain == window.location.hostname){
document.domain = document.domain.substring(document.domain.indexOf('.')+1);
EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
function myreceiveEvent( eventObj ) {
document.forms[0].gp_hidden.value = eventObj.dataObject;
</script>
Also look at the following link for a complete documentation.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
Regards
Raja -
My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.
shahzadfromlahore wrote:
Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
Who set up the phone? Who's Apple ID was used to activate it?
Maybe you are looking for
-
Vista 64 bit and laserjet 3030 scanner quit working
My LJ 3030 worked fine until I connected it to a machine running Vista Home Premium 64bit. Now when I plug the printer (USB) in to the computer the Vista OS loads the "driver" and all seems well. The printer prints fine. But I have no tool box to run
-
Which product do I purchase???? - Creating a merged PDF report from excel with cover page
Hi Guys, I work in the BI field and have created a pdf document using PDFCreator and another third part scripting tool called jpdfbookmarks. We have delivered something to the client but the quality of the output ( not the best) and the time it takes
-
I'm trying to print from I pod but it say no airprint service is available. I have a kodak 5250 hooked up to my airport extreme utility. Help
-
Hi, I created a single UDF under Marketing Docs -> Title using the B1 GUI. In my code, I disabled that EditText object. Now, I cannot seem to re-enable it. I get: The Item Is Not a User-Defined Item I've restarted B1. I've restarted my compiler.
-
Some app purchases are asking for further verification by setting up "security questions" even though I'm logging in with my Apple id. If I go to the Apple site to edit my account rather than linking from the app I can't see anywhere to create these