How to use mask in adobe director 11.5 without any language(lingo), just animation in timeline

He people i have this problem i have to use mask, in adobe director, but i don't know how to do it, its kinda diferent then flash, i'm brazilian, my english isn't very good, so sorry everybody for any wrong word.
what i should do ?
don't wanna use Lingo or something like that

hmmm, i don't know how to explain so much, but i'll try, i don't know if you know flash, but in it have a thing called mask.
show just a part of the shape without code, just using the timeline

Similar Messages

  • How to use the VBS MoveFolder methode in DIAdem without any error message?

    Hi,
    I want to move folders with the VBS MoveFolder methode, but in DIAdem I run in problems. When I use the following comman    fso.MoveFolder(project_folder & test_folder, project_folder & test_folder & "\" & test_ & " " & test_count) 
    I get error message
    "During call a sub routine no parentheses are allowed!"
    When I remove the brackets and use    fso.MoveFolder project_folder & test_folder, project_folder & test_folder & "\" & test_ & " " & test_count 
    I get the error message
    "Invalid sub routine call."
    How I have to use the command right?
    (the text of error messages is free translated from German Version of DIAdem 11.0! Take only the sense, not the exact wording!)
    Thanks for help.
    Regards
    Sven

    Hello Sven!
    Just add a 'Call' at the beginning of your first line will solve the syntatic error. I recommend always to use 'Call' and parenthesis.
    But there is a fundamental problem in your code: MoveFolder moves a folder from a source to a new destination and the old source folder will be deleted. You try to move a folder to a location below the same folder. If the MoveFolder wouldn't recognize these situtation and throws an error all of your data would be deleted!
    Just print out your paths in a Messagebox to clearify the situation.
    Matthias
    Matthias Alleweldt
    Project Engineer / Projektingenieur
    Twigeater?  

  • How to use a timer in director to count down to quit

    how to use a timer in director to count down to quit

    Hello Christos,
    I'm sorry, but I have to give you again some links, at the moment I don't have "selfmade" files for you.
    First these Adobe help files:
    http://help.adobe.com/en_US/Director/11.5/Beginners/WS287f927bd30d4b1f5218ba7912ff9103109- 7feb.html
    http://help.adobe.com/en_US/Director/11.5/UsingScripting/WSc3ff6d0ea77859461172e0811d64c1a 1b3-7ae3.html
    Second an interesting thread from the forum with a "cookbook":
    https://forums.adobe.com/thread/1261561
    Hans-Günter

  • How to use search help in ECC6.0 reports without matchcode.

    How to use search help in ECC6.0 reports without matchcode.
    Select-options: O_SHIP FOR KUNWE MATCHCODE OBJECT DEBI  is in 4.6c.

    we can use on value request for that.
    report zrich_0001 .
    tables: t001.
    data: begin of it001 occurs 0,
    bukrs type t001-bukrs,
    butxt type t001-butxt,
    ort01 type t001-ort01,
    land1 type t001-land1,
    end of it001.
    select-options s_bukrs for t001-bukrs.
    initialization.
    select bukrs butxt ort01 land1 into table it001 from t001.
    at selection-screen on value-request for s_bukrs-low.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
    retfield = 'BUKRS'
    dynprofield = 'S_BUKRS'
    dynpprog = sy-cprog
    dynpnr = sy-dynnr
    value_org = 'S'
    tables
    value_tab = it001.
    start-of-selection.
    refer to this thread:
    On value request?

  • How to call a Javascript function from backing bean without any event

    Hi,
    Someone knows how to call a Javascript function from backing bean without any event ?
    thanks

    Please review the following thread:
    ADF Faces call javascript
    Luis.

  • I currently have an iphone that i connect to my mac air to download music, i have now bought a nano for my wife can we use both devices on the same air without any problems???

    i currently have an iphone that i connect to my mac air to download music, i have now bought a nano for my wife can we use both devices on the same air without any problems???

    My wife and I both have the iPhone 4 and it's actually pretty simple. Add another user on your MBA (her) and she can use the other iTunes when she is logged in. The iTunes is empty and will erase her iPhone, so be sure that she syncs her iPhone, then back up her library onto a portable media device like I did (SD Card) and reload it onto her empty iTunes on your MBA before she attempts to sync with it.
    Works well...
    Sly

  • How to use airplay speakers in multi-output device without crackling audio?

    Hi,
    I would like to mirror the audio output from my mac mini to the built-in output and an airplay speaker.
    Therefore I added a Multi-Output Device containing  the Built-in- and Airplay output, as soon as I activate the airplay speaker the sound is mirrored but unfortunately always with a crackling sound coming of the speakers set as "slave Device"... only the Device set as "Master Device" has clear sound, doesn't matter if it's the airplay speaker or the speaker (or headphone) directly connected to the built-in output.
    I've tested this with a mac mini and an mac book air as audio source, same problem. Both were running Mac OS V. 10.9.2.
    Does anyone have an idea what I'm doing wrong?
    Greets
    Chris

    I'm using a 2011 Macbook Pro running Mavericks and current Apple TV (MD199HK/A 3rd generation) when trying to output audio to both Apple TV and built-in output simultaneously I suffer crackling and popping. I have this issue once I use Audio MIDI Setup (under utilities) to create a Multi-Output Devise. Once I use this multi-output devise made up of Apple TV and Built-In Output to get my music to both output devises at once BUT I get crackling sound on either Spotify or iTunes.
    I've worked around this issue by using AirParrot. I select Apple TV in AirParrot with Audio enabled. The Apple TV then takes all audio output, then I select the 'Multi-Output Devise created in 'Audio MIDI Setup' and I have playback through Apple TV and Built-In Output without any crackling or popping.
    Only minor outstanding issue is that whatever scenario I then run Audio Midi Setup in terms of setting various devises as Master Clock and resampling of sub devise I can't perfect the sync between Apple TV audio output and my local Macbook Pro, but close enough with the slightest hint of echo. Plenty of forums discussing Word Clock sync which is out of my league. Un-ticking drift correction on the 'AirParrot' audio output has them close enough, depends on how easily you can hear your apple TV output from the room where your Macbook Pro is and vice versa.

  • Allways freezout this new version. Minimum 6-10 times a day, than all the time I will restart than I get back How to use Fire fox! Even I don't need this, I just want to see my stuff on internet! How that can be happen?

    Probably other people have a same problem since the new version updated. So much times in a day just freezout Firefox and than I have to restart. Even doesn't matter how much page I have opened. Sometimes 4-6 somtimes 10-12, but come on this is the NEW FAST AND GREAT version that's shouldn't be a problem for this! Than if I stop to send this firefox and restart again, I everytime waiting so long 2-4 minute 'cause allways re open this new tab with How to use new firefox... or something else! I don't want to learn anymore! I just want to have one firefox wich can be working day by day without problems and I can use my favorit plug ins and I don't mind anymore how I can use this newest version! Please don't change every month than we have a lot of problems! First waiting for the REALLY GOOD VERSION WICH DON'T HAVE ANY PROBLEM AND JUST THAN UP DATE FOR US!!!

    A warm welcome to Apple discussions!
    A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say  for your processor speed? What does it say about how much RAM you have?
    If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
    Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
    A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
    The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
    There are a few more things we might check but this is a good start.
    Awaiting your information,
    Allan

  • How to use navgation app,(map) on iphone 4s without internet ?

    How tu use navgation app. (map) on iphone 4s withoutinternet ( by satellit )

    You can't use the defalt Maps app without an internet connection.  It's required to download the maps.
    There are several nav apps in the App Store that have built-in maps and don't need an internet connection.  TomTom and Navigon are two.

  • How to use application builder to generate installation disk without compiling the the support files?

    Hello,
    What I am trying to do is to use LV application builder generating an installation disk without compiling the support files. I mean:
    the support fils like the help files are located on a different directory , for example, installation disk is D drive, help file directory is: D:\Help\...,  not compiled in the installation Data set.
    So,  when the installation disk is running, it only copy this directory file into the destiny directory. Of course, we can write a different bat file to do this. However, beside this method, is there any way, like using LV application builder to do this without writing a batch file.  Any suggestion will be appreciated.

    For LabVIEW 7.1, this can be done in a few short steps. First, add your help file as a support file in the Application Builder. Then go to the Installer tab, choose to create an installer and click on the Files button at the bottom. From this dialog (shown below), you can specify the destination for each component in your install package. If you have added your help file as a support file, it will show up in the Files in Installation list. Click on your help file to highlight it. You can now choose where to install the file to by specifying an installation destination and a subdirectory. The default subdirectory is called data, but if you want to change that, just type in a new subdirectory name as I have done below:
    Hope this helps!
    Message Edited by Jarrod S. on 01-23-2006 10:17 AM
    Jarrod S.
    National Instruments
    Attachments:
    Support Files.JPG ‏31 KB

  • How to save an edited PDF in Acrobat Pro without any compression

    Hi,
    I just edited an existing PDF in Acrobat Pro 9 - actually I inserted some high resolution images in TIFF via the Touchup tool.
    What do I have to do to save it without any compression of the TIFFs - I tried a lot, but the outcome is always compressed, showing artifacts.
    Thanks

    First, editing PDFs is really only for minor fixups. There is generally no word wrap or such when doing such editing and often then seem to go downhill fast. To edit text, you have to have the font available. If the file was scanned and the OCR applied was searchable text, the only option to edit what is displayed is with a graphics editor, typically PhotoShop. PhotoShop allows Acrobat to have edited graphics and then be reinserted in the file (I don't do it, so can't give details). ClearScan replaces what is seen on screen in the graphic with the text. In that case, you see all of the text and the corresponding errors (often many). You may want to load a graphic (bitmap) with text showing or use a scan and try the various versions of OCR to see what I am talking about. That may help you see the options. Searchable PDFs is more useful if an original is critical, such as in the legal profession.

  • For PCI-4451,How to change the frequency of an output signal without any undefined state

    I would like to generate a signal using output channels of PCI-4451 and at the same time capture data using the input channels. Is there any method that I can generate a continuous signal without any undefined state when the signal frequency is being changed?
    Attachments:
    Input_Signal.bmp ‏729 KB

    Wee,
    DSA boards such as the PCI-4451 have a number of very desirable properties including high precision and a high sampling rate. The trade-off for the combination of these two properties is that the DSA boards cannot adjust their sampling rate on-the-fly. Instead they have to be stopped and reconfigured. During this reconfiguration time, the value of the board's output becomes flat and level.
    If you are looking to adjust the board's output without seeing these flat spots, you have to take a different approach to programming a DSA board. Instead of reconfiguring the board, what you need to do is allow the board to continue to run (at the same output frequency), and then overwrite the output buffer that the board reads to output values. This will
    allow you to output new data without the flat spots. Below you will find an example that displays this behavior.
    If you determine that this is not an acceptable workaround due to the limitations on output rates, you may want to look at using a Multifunction DAQ board (60xx or 62xx) or an arbitrary waveform generator (54xx) device instead.
    Best of luck with your application.
    Regards,
    Jed R.
    Applications Engineer
    National Instruments
    Attachments:
    Cont_Gen_Voltage_Wfm-Int_Clk-With_Updates_for_DSA.llb ‏161 KB

  • How can I remove the first exchange server 2010 without any problems in DC

    Hi,
    our actually exchange is running on windows server 2008R2 with exchange 2010. I already install & configured a second Exchange 2010 server in the same domain. I also moved every mailbox to the new server. Now I have to deactivate the first server and
    I don't know, if I have to do something or can I deactivate the "old" server without any issues.
    If I can deactivate it, how can I do this? Is it enough to uninstall exchange 2010 on the server and after that I uninstall the windows server? Did I have to change something before?
    Thanks,
    Mesut Uygun
    btw. sorry for my bad english

    Hi MesutU,
    When you remove first Exchange Server 2010 in your organization, please confirm finish following steps:
    1. Move all mailboxes (including discovery and arbitration) to another server
    2. Move all Public Folder replicas
    3. Move OAB generation server
    4. Update SMTP flow from internet
    5. Update OWA/IMAP/POP/OA access from internet.
    6. Update any routing group connectors if 2003 is present
    7. Turn the old server offline for some days to check whether the new server works well.
    More information about How to Remove the First Exchange 2007 Server in a Coexistence Scenario (even if the version of Exchange server is different), for your conference:
    http://technet.microsoft.com/en-us/library/bb310767(v=exchg.80).aspx
    Best Regards,
    Allen Wang

  • Tutorial on how to use slideshow in adobe golive

    hI,
    I have been tearing my hair out for the last week I find it impossible to work out how to set up a slideshow in adobe golive cs - Does anybody know some simple tutorials on how to do it, as I find the online help with golive no help at all..!
    I have tried this link, but I still can't work it out
    http://www.afterhours.org.uk/qtips/sld_act.html
    Step 2:
    Place the first image of the slide show sequence on the page where you want your slide show to appear. That will be the base image of the slide show.
    The image needs a name so that the Javascript used for the slide show can reference it properly. This is done on the Basic tab of the Image Inspector in GoLive CS, and in the More tab of that Inspector in earlier versions. (Mouse over the link underneath the CS image shown to see the GoLive 6 Inspector.)
    What are you suppose to put in the ALT TEXT AND NAME/ID
    It says in the tutorial put Basic slide show in the ALT TEXT is that correct..?
    and the link what are you suppose to put in the text section of the inspector
    I have named my jpegs as 01.jpeg 02.jpeg and so on and put them into a folder that says canoe..
    any help would be much apreciated..

    On the home page on the free to register technology network
    http://www.oracle.com/technetwork/middleware/bi-publisher/overview/index.html
    you will find resources such as
    * Oracle BI Publisher Datasheet - a 3 page overview document
    * Oracle BI Publisher Overview Presentation - (Recorded Presentation with Sound - 18 min)
    * Oracle BI Publisher - Benefits - Flash
    * Oracle BI Publisher - Quick Tour - Flash
    some sample reports
    http://www.oracle.com/technetwork/middleware/bi-publisher/xmlpsamples-099828.html
    and a tutorial with screen shots
    Getting Started with Oracle BI Publisher 11g
    http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

  • How to use original preinstalled Adobe-Photoshop-elements on new notebook?

    Hello everybody.
    In my old TOSHIBA Satellite Pro A100-938 notebook, I've been used the above-mentioned software, licensed and pre-installed at the moment of the purchase. Now I've got a TOSHIBA PRO A300 - 28T model.
    How can I do in order to transfer this software from the old notebook to the new one? Unfortunately the pre-loaded photographic correction program is not as functional as the other one.
    Help and/or suggestions hereof will be highly appreciated, thanks in advance !

    I found this Toshiba Satellite Pro A100 spec page:
    http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 &ACTION=PRINT_WITH_BACK&com.broadvision.session.ne w=Yes&PRODUCT_ID=121990
    and as you can see the Adobe Photoshop Elements was not preinstalled by Toshiba and is not part of the image so you will need to buy the full product licence to use this software.

Maybe you are looking for