How to use mobile internet in xp system through usb cable

I was using mobile internet on my pc through usb tether. I have a xp system and I connect through use cable. I downloaded PdaNet+ usb tether driver and it was working fine for a couple of days. But now it is not working and I can't even re-install it. Can anyone tell me the other option to install usb tether driver on xp system.

Not possible. The USB connection only allows for data transfer between the computer and the device, it cannot function as a gateway to the Internet.
tt2

Similar Messages

  • I have take pictures from my ipad 4. How to download to my computer with windows operating system conneted through USB cable with out using internet

    I have take pictures from my ipad 4. How to download to my computer with windows operating system conneted through USB cable with out using internet

    Plug your iPad into your computer. THere may be a delay while it installs drivers but if you can see your iPad in windows explorer, use that to get to your photos.
    Click on your iPad and you should see a DCIM folder. Click thorugh that to find your photos.
    Windows explorer will see your iPad as nothing more than a digital camera, and that's the part you're trying to access.

  • How to use Mobile VOIP on BB9300

    Please guide me how to use mobile VOIP to make call from BB9300. Please advise

    You need to download and install the latest Ovi suite and install it on your laptop. Connect your phone to your laptop via usb or bluetooth in PC Suite mode. In Ovi suite, goto Tools > Connect to Internet. After setting your country and carrier, the suite will connect you to the internet via your phone.
    Note that this will connect you using your phone carrier's network, so you will incur data costs on your phone plan.
    If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

  • How to used the internet connection adsl on my com...

    how to used the internet connection adsl on my computer by nokia n73 me
    i whant used the adsl connection in nokia n73 me by Bluetooth or cable
    and thank you

    Hi Theo,
    There are several ways to implement this using simple timing features of LabVIEW.  Two fairly simple methods are comparing system time stamps or using the Wait VI provided in the Timing palette.  The time stamp comparison requires a little bit more programming, but can be included in your main program loop.  To use the Wait function, you will probably need to construct a new loop parallel to your main loop.  I have attached screenshots of these two implementations.  Please let me know if you have any more questions.
    Donovan
    Attachments:
    WaitDelay[1].Png ‏5 KB
    TimeStampFalse.Png ‏11 KB
    TimeStampTrue.Png ‏11 KB

  • I am using mobile internet from my iphone 3g.Can we have any option to use internet on computer using my iphone

    Hi,
    I am using mobile internet from my iphone 3g.Can we have any option to use internet on computer using my iphone

    you can't bypass activation.  Your phone needs to be activated for any of the functions to work.
    This problem happens often to phones previously jailbroken.  Is this the case?

  • How can i make mt own radio station on iPad or iPhone.....and how to use mobile terminal ???

    How can i make mt own radio station on iPad or iPhone.....and how to use mobile terminal ???

    what do you mean radio station as in you would be transmitting fm to the airwaves?

  • How to Use Home+End Key on new short usb apple keyboard on XP

    How to Use Home+End Key on new short usb apple keyboard on XP
    now i use macbook and new short apple keyboard.
    it hasn't Home and End key. i try to use Fn + -> , Fn + <-
    it cann't do that. How can i set the Fn + <- be Home key
    and Fn + -> be End key like on my macbook keyboard
    thank you for answer

    Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
    The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
    But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
    I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
    Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
    I hope that now you have an idea what I’ve done…
    Good night
    Björn
    PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

  • I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705. E

    I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705.
    Everytime I restart the computer now I get a open with window.
    When I select Notepad and open it I get
    0x54c  Noswal\.android\adb_usb.******
    How do i undo that.
    If it helps the Article ID:474705 this says at one point
    3. Open a shell prompt and enter the following command: echo "0x54c" >> $HOME/.android/adb_usb.******.
    I gues that's what's creating the problem.
    Please help.

    Hi elishacuthbert.
    Try disabling the start-up items in your computer to troubleshoot the issue. Follow the steps mentioned below:
    Right click on the Taskbar > Task Manager > Start-up > Select the applications > Disable.
    Note: If my post answers your question, please mark it as an "Accepted Solution."

  • TS1373 how can i connect my iphone to computer through usb using windows 8?

    how can i connect my iphone to computer through usb using windows 8?

    If iTunes is installed, you just connect the iPhone to USB.
    http://support.apple.com/kb/HT1386
    You can also sync to iTunes using WiFi.

  • Internet through USB cable connection

    Dear Sir;
    How do I connect my phone to the internet through USB cable connection?
    i would like if i can connect to the internet through the USB cable, not through W-LAN, so if i can, how , which software i need?
    Best Regards

    you ahve to install Nokia PC suite then you will be able to connect to internet via your phone over the USB cable.

  • Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    problem solved.
    I phone 4s screen froozen

  • Hi all,,,, I am using apple ipod classic 80 GB... can anyone please tell me why i can't see my device on itunes once i connect it to my pc through usb cable???CAn anyone please help me out .... thanks

    hi all,,,, I am using apple ipod classic 80 GB... can anyone please tell me why i can't see my device on itunes once i connect it to my pc through usb cable???

    Hey wajahat86!
    Here is an article that describes this issue and can help you resolve it:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • How to use mobile as a wifi internet on pc...

    Hello, i want to connect my laptop to internet by using my nokia e71 wifi because my have no wifi. so plz tell me how can i connect my laptop to internet by using mobile wifi?

    You need to download and install the latest Ovi suite and install it on your laptop. Connect your phone to your laptop via usb or bluetooth in PC Suite mode. In Ovi suite, goto Tools > Connect to Internet. After setting your country and carrier, the suite will connect you to the internet via your phone.
    Note that this will connect you using your phone carrier's network, so you will incur data costs on your phone plan.
    If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

  • How to use LAN internet from PC in N79 ?

    Hi there.. As question states, I want to use PC internet in N79. I have a 2Mbps ADSL broadband connection through LAN in my PC. I want to use that in my N79. I know it is possible other way round using PC Suite. Can I access PC internet in my N79 ? If yes, please tell how. What are the settings ?

    I too have a N-79 mobile. when i connect to a wireless network i was asked a WEP key. I gave the key and got connected. when i surf through the browser i get this error "Gate-way Error". How do i solve this problem. kindly help me out. I have a Lenovo laptop with wi-fi facility. and 2Mbps BSNL broadband.
    Message Edited by samresh22 on 23-Dec-2009 05:51 AM

Maybe you are looking for

  • Adding line to txt file and then rename

    Hello there. I am trying to create a class that will add a line to a txt file and then if the nuber of lines are greater than 5 it will rename the file. I think I have solved it with this class. My problem is that the file2.renameTo does not work doe

  • How do i get audiobooks to work

    i downloaded a book from an internet site and it is listed under a mp3 format, but the genre reads a audiobook. how do i get it into the audiobooks slot so that i can listen to in there and not have it mixed in with my music? right now it is just und

  • HT5621 Change I cloud to match apple user and password

    I would like to change I cloud user and pass word, how do I do this

  • Gaussian blur and Colour Adjust Hue/Saturation cause freeze-up

    After using PS Elements 9 for a year, it has started to give me problems, and I can't find a fix for it online.  Choosing Gaussian Blur, or Color - Adjust Hue/Saturation causes PSE 9 to freeze up and stop responding.  This just started today, and I'm

  • Photoshop immediately shuts down and I get an error.

    When I open Photoshop it immediately shuts down and I get an error.  Is there an issue with CC?  I also had the same problem with Illustrator and InDesign.