How to use Modal Parameter Extraction Labview VIs

I can't install Modal Parameter Extraction Labview VIs
http://zone.ni.com/devzone/cda/epd/p/id/6121
The installer says "NI Labview System Identification Toolkit 4.0 or 2009 must be installed before you can install NI Modal
Parameters Identification 1.1"
under Labview 2010(+the
LabVIEW Advanced Signal Processing Toolkit and LabVIEW System
Identification Toolkit).
Should I delete Labview 2010 and reinstall 2009??
解決済！
解決策の投稿を見る。

Hi KCMTM,
My name is Yusuke Minami, Applications Engineer, NI Japan.
I'm so sorry, but the "Modal Parameter Extraction Labview VIs" is not supported by LabVIEW 2010.
Since it will unlikely be updated for 2010, we have to ask you to install LabVIEW 2009 with the LabVIEW Advanced Signal Processing Toolkit and LabVIEW System Identification Toolkit in order to use the package.
Although I cannot guarantee, but I'll send an update request to the R&D.
I deeply apologize for the inconvenience.
日本ナショナルインスツルメンツ株式会社　技術部　巳波裕介
Yusuke Minami, Applications Engineering, National Instruments Japan
技術サポートウェブページ:　http://www.ni.com/support/ja
お問い合わせフリーダイヤル:　0120-527196

Similar Messages

How to install modal parameter extraction VI for labview 2011

Hi,
I have installed Labview 2011. I would like to install the modal parameter extraxction for this version of labview. I have also installed the advanced signal processing toolkit and Systeme identification toolkit accordingly. Kindly let me how i can install the modeal parameter exraction VI. Thank you.

Hi Vishal,
You can download Modal Parameter Extraction VIs from here:
https://lumen.ni.com/nicif/us/evalmodalpara/content.xhtml
Thank you,
Eden S
Applications Engineer
National Instruments UK & Ireland

Modal Parameter Extraction VIs

Modal Parameter Extraction
http://zone.ni.com/devzone/cda/tut/p/id/11494
http://zone.ni.com/devzone/cda/epd/p/id/6121
が使用できません。
インストーラに「NI Labview System Identification Toolkit 4.0 or 2009 must be installed before you can install NI Modal Parameters Identification 1.1」と言われてしまいます。現在使用しているのはLabview 2010(+the LabVIEW Advanced Signal Processing Toolkit and LabVIEW System Identification Toolkit)です。
解決済！
解決策の投稿を見る。

解決しました。
http://forums.ni.com/t5/NI%E8%A3%BD%E5%93%81%E3%83%87%E3%82%A3%E3%82%B9%E3%82%AB%E3%83%83%E3%82%B7%E...

Modal parameter extraction

Mon nom est Jesús Carmona. Mon collègue Mari Carmen et moi faisons actuellement le projet final à l'école ENIM (Ecole d'Ingénieurs de Metz, France).
Nôtre projet est d'effectuer une analyse modale avez Labview sur différentes pièces avec un marteau et un accéléromètre et d'instruments national instruments usb 9234.
Nôtre projet consiste à effectuer une série d'améliorations à un test d'impact fichier labview vous envoie ce mail. Une amélioration que nous devons faire est d'entrer l'outil Modal parameter extraction appelé Least square complex exponential fit (LSCE), afin de connaître les paramètres modaux du signal fourni par le marteau.
Essais de plusieurs manières nous ne pouvons pas obtenir le solución.
je t'ai envoyé le fichier sur lequel je dois entrer le outil LSCE et donc de connaître les paramètres modaux.
Merci beaucoup pour votre temps et votre aide.
Cordialement,
Jesús Carmona
Attachments:
Impact Test with SW Trigger(DAQmx) v5.vi ‏119 KB

解決しました。
http://forums.ni.com/t5/NI%E8%A3%BD%E5%93%81%E3%83%87%E3%82%A3%E3%82%B9%E3%82%AB%E3%83%83%E3%82%B7%E...

How to use a parameter of a report program from selection screen in a dialog program

how to use a parameter value(entered ) of a report program from a selection screen in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog program

Hi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

How to use a parameter of a report program in a dialog program

how to use a parameter of a report program in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog program

Hi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

How to use a parameter in a report program in a dialog program

how to use a parameter in a report program in a dialog program

Hi Shaikh,
Post it in http://scn.sap.com/community/abap
"ABAP Development".
sree

How to use crystal reports in LabVIEW

Hi, Can anybody tell me how t use crystal reports in LabVIEW. If any material if you will be very helpful.
Regards,
Rajashekar

activeX

How to use shared parameter on request set

Hi
I have a request set with two stages
First stage contains From Date and To date where i have named the shared parameter as StartSP and EndSP
i have to use these shared parameter in one of the query in next stage where my Type is SQL Statment and i have these two date fields From date and To date in next stage as well where i am able to retirve the values from previous stage
based on these values i need to get the name in next parameter where my Type is SQL Statment
select name from tablename where '02-MAR-09' > =start_Date and '29-MAR-09' <=end_Date
I have written SQL as
select name from tablename where StartSP > =start_Date and EndSP <=end_Date but it throws an error.
I need the values of 02-Mar-09 and 29-Mar-09 from StartSP and EndSP
Appreciate if any one has idea about this.

hi user;
please check:
http://download-west.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/repset04.htm
http://download-east.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/10gch609.htm
Also you can check this search:http://www.google.com.tr/search?hl=tr&source=hp&q=How+to+use+shared+parameter+on+request+set+&meta=&aq=f&oq=
Hope it helps
Regard
Helios

How to use dynamic parameter when a report is created using Stored Procedures

Hi all,
any one have the idea of how to use dynamic parameter in crystal report XI R2
when report is created using Stored Procedure.
Regards
shashi kant chauhan

Hi
You can create an SQL command in Database Expert > Expand your datasource > Add command
Then enter the SQL query that will create the list of values to supply to the user
eg select field1,field2 from table
Then edit the parameter of the report. These will be the SP parameters adn can be seen in field explorer.
Change the parameter type to Dynamic
Under the word Value click on Click here to add item
Scroll down to your Command and select one of the values that you want to appear in the list
e.g field1
Then click on the Parameters field - this is essential to create the param
You can edit other options as required
That should do it for you.
I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
Best of luck

How to use PXI-8532 in LabVIEW Development Environment?

Hi,
I want to know how to use PXI-8532 in LabVIEW Development Environment.
I'm using
1. Windows7 32bit
2. LabVIEW Pro 2012 SP1 32bit
3. NI-Industrial Communications for DeviceNet 2.3
4. PXIe-1062Q
5. PXIe-8135
6. PXI-8532 *2 (Names are "dnet0" and "dnet1".)
* Both PXI-8532 are installed in the same chassis (PXIe-1062Q).
I want to construct the system that "dnet0" sends data, and "dnet1" receives it. The data type I want to use is an array of bools.
I made VI (test.vi), but it does not work.
Could you tell me the reason why my VI doesn't work correctly.
Thank you so much for your help and time.
Best Regards,
volcanon2
Attachments:
test.vi ‏28 KB

activeX

How to use lexical parameter in report

i want to use lexical parameter in report and pass parameter from form how it is possible in detail
A.R

Hi,
typically you fill your lexical paramter in the after-paramform-trigger out of the values of your bind-parameters (giving end users directly control over lexical parameters might not be a good idea). Inside PL/SQL a lexical parameter is referenced like bind parameters with ":". In the query it's referenced via "&" and represents a part of the query.
A simple example.
- p_deptno as bind parameter
- p_where as lexical paramter
- end user choose value for p_deptno (10,20,... or nothing)
- Trigger: if :p_deptno is not null then
:p_where := 'WHERE deptno = :p_deptno'
else
:p_where := null;
end if;
- Query select ... from emp &p_where
Regards
Rainer

How to use import parameter to be instead of SQL where sub-sentence ?

I wrote a RFC to read data from SAP table. To fetch data flexibility, I want to use import parameter xx instead of where sub-sentence in SQL sentence.
   For example, "SELECT * FROM T WHERE XXX", and "XXX" is a importing parameter.
   How can I use it.
   Thanks a lot.
   Frank.

FUNCTION ZRFC_04.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(TARGETTABLE) LIKE MAKT-MAKTX
*"     VALUE(TWHERE) LIKE MAKT-MAKTX
*" EXPORTING
*"     VALUE(ZRETURN) LIKE MAKT-MAKTX
*" TABLES
*"      TMP_TEST1 STRUCTURE ZTEST1
DATA:
TRANSACTION_ID LIKE ARFCTID,
V_VAILD(1) TYPE C,
scond(80) TYPE c.
V_VAILD = 'X'.
GET PARAMETER twhere fields scond.
The error " 'LATE FIELDS' expected, not 'TWHERE FIELDS' " generated.

How to use a parameter field value as a substring in a "like" statement?

Hi all,
I'm trying to use a parameter field in a Record selection formula where the parameter field value would be a substring of the data stored in the field.
My parameter field (SlctResearcher) is constructed as follows:
Type: string
List of Values: static
Value Field: (Reports) RptAuthors
(in Value Options) Allow custom values?: True
{Reports.PubDate} in DateTime (2009, 04, 01, 00, 00, 00) to DateTime (2010, 03, 31, 23, 59, 59) and
{Reports.RptAuthors} like "*{?SlctResearcher}*"
When I hit F5 to generate the data, I get no results (and the parameter prompt field does not even come up...)
If I modify the formula to put a hard-coded string, like
"*Jones*"
after the 'like', I get results (all the reports where "Jones" is a substring in the RptAuthors string.) If I modify the formula to just use the parameter field without the quotes/stars like:
{Reports.PubDate} in DateTime (2009, 04, 01, 00, 00, 00) to DateTime (2010, 03, 31, 23, 59, 59) and
{Reports.RptAuthors} like {?SlctResearcher}
I do get the parameter prompt field, but still no results even if I put in a valid substring value (since it is not searching for a substring anymore...)
How can I do this?
Thanks,
Will

1st thing... Make a copy of your report before doing anything!!!
To use a SQL Command, you'll want to open the Database Expert and look at the Current Connections. Expand the data source and the 1st option you see is the Add Command option.
To find the SQL That CR is currently using, choose Database from the menu bar and select Show SQL Query...
You can copy this and paste it directly into the command window. (If you you can write your own SQL you don't need copy CR's, it's just an option.)
You'll also want to take not of any parameters that you have, you'll need to add them the the Parameter List of the command as well... be sure to spell them EXACTLY as they are in the design pane.
Anyway, once the SQL statement is in the Command window you'll be able to alter the WHERE clause to use the wild cards.
For future reference... What type of database are you reporting against???
Jason

When/How to use - "search" parameter type in parameter like other types.

We recently upgraded BI Publisher to 10.1.3.4. I saw new parameter type "search" in parameter section, when creating report. whats the use of it? How to use it ? like other parameter type Text, Menu,Hidden, Date.
I couldn't find any help or release notes on this !
Thanks
Ayaps

I started looking into this parameter type when our drop-down for customer numbers went from 13,000 (manageable) to 45,000 (completely unmanageable).
I imagine this is supposed to mimic the effects of a "Long List" type LOV in Oracle Applications (as I had inquired about in [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=895521&stqc=true|Large List of Values (LoV) hangs. Is there an equivalent for a long list?]), but performance-wise, "Search" does not seem to be any more efficient that using the "Menu" type LOV. Even with the help of having a partial string with a wildcard to match, the "Search" still takes too long to pull up to be of any use to us.

How to use Modal Parameter Extraction Labview VIs

Similar Messages

Maybe you are looking for