How to use more than one airport express with multiple speakers

I have 2 Airport Express. Prior to the multiple speaker enhansement I changed spekers by changing the wireless network. Each of the Airports is recognised as a wirelss network. Is there any way I can make my computer and itunes to see all of my Airports so I can use the Multiple Speaker function for both of my Airports at the same time withour having to change wireless network.

You need to have a single wireless network.
If you con't have a wireless router, then you will need to configure one of the Airport Express (AX) units to join the existing wireless network of the other AX.

Similar Messages

Can i use more than one airport express to extend the airport extreme?

my house is too big, and i use one airport express to extend my network,but the other half of the house doesnt get access to the internet.The question is can i use another airport express, without any complications?

Yes, up to 255 if I remember correctly. But before you do that take a look at the products offered by QuickerTek to amplify the output power of a router and/or add gain antennae to help increase the router's range without the need for adding access points.

Can I use more than one AirPort Express to deal with access problems on my system?

my house unfortunately has wall-boards which have a layer of tin foil on them, which is great when you are looking for cheaper heating bills, but is absolutely awful when trying to install Wi-Fi!

Yes you can, you could either run cat 5 cable to each one and have them as seperate wii networks or do as I do and use the as range extenders.
See http://www.apple.com/uk/airport-express/
Extend an existing Wi-Fi network’s range.
If you already have a wireless network in your home and want to extend its range,AirPort Express can help. Just place it in range of your primary base station — anAirPort Extreme, AirPort Time Capsule or another AirPort Express — and near the area where you want your wireless connection. Launch the easy-to-use AirPort Utility app on your iOS device or Mac, and you’re mere minutes away from long-range Wi-Fi enjoyment.

Transmitting to more than one airport express from iTunes

Are there any plans to update the system so that iTunes can transmit to more than one AirPort Express or An airport Express and the computer at the same time?

paulcart, Welcome to the discussion area!
For quite some time, the ability to stream iTunes to multiple AirPort Express (AX) has worked.
Are there any plans to update the system so that iTunes can transmit to ... An airport Express and the computer at the same time?
We are all users like yourself and therefore have no special knowledge of upcoming changes. As you know from reading the "Help & Terms of Use" for this area, speculation on future Apple products or services is not allowed.

Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

Dear All
Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
Many thanks

Click here for options.
(69081)

Can I use more than one iTunes account with my apple TV?

Can I use more than one iTunes account with my apple TV?

That depends what you mean. If you mean can you purchase from more than one iTunes account on the Apple TV, then the answer is no. If you mean can you stream from more than one iTunes library, which use different accounts, then the answer is yes, so long as they both use the same ID and password for homesharing.

How to use more than one device under same apple ID?

How do you you use more than one device under same apple ID? say for facetime?

You don't. One Device and one Apple ID.

How to use more than one JCo in one project?

hi all,
I want to use more than one r/3 systems and want to switch between them while running the application.
For that, how can I use more than one JCo connection in one project and how to activate/deactivate them so as to switch in between them? And if that possible then what am I suppose to do in order to fetch the data from activated R/3 while running the application.
Regards,

Hi,
Try this threads
Multiple Client Logon in JCO
Multiple JCO client connections
Regards
Saravanan K

How to use more than one application server during initial load?

Hi,
we plan to use more than one application server in CRM during initial download in order to increase the number of parallel requests and to decrease the time for the initial load. Is there a way to allocate requests to more than one server? Is is possible via multiple rfc connections for consumer CRM in CRMRFCPAR?
Thanks.
Alexander Schiffer

Hi Naresh,
thanks for your answer. It has solved my problem. SMLG is the transaction that I was looking for.
Two more OSS notes that helped me to guide our basis into the right direction:
OSS 593058 - New RFC load balancing procedure
OSS 1413986 - SMLG: Possibility to select a favorite type for Ext.RFCs
Thanks again.
Alexander Schiffer

How to use more than one dataset?

Hi,
Is there any way to use more than one dataset in one report?
Thanks..

Yes, we can use more than one dataset..
We can group the data sets using group feature and or(|) condition, like below
<?for-each-group:/DATA/TOTAL_DEP/TOTAL_DEP_ROW|/DATA/FA_DATA/FA_DATA_ROW?>

Using more than one external drive with apple tv and itunes

I've searched the forums and haven't found a clear answer for this. Is it possible to use two seperate drives for the itunes library? I've already filled up my external firewire drive and would like to get another one.
I've read in several places that people are doing this, but haven't found clear instructions on how its done.
Much thanks!
Brown.Recluse

I don't think you can have more then one folder designated as you itunes library folder, so you can not have more then one drive for your library folder. However you can use more than one drive for you content. I have 6 drives that I use right now. I store the movies and tv shows on those drives. I drag a movie into then library tab in itunes and it just links itunes to the path of the movie. To do this however you have to unclick a option in itunes. It is the menu that you tell the path to you library, you have to unclick “copy to your library” not sure if this is the exact name of this. If you don't do this it will try to copy the movie you dragged in instead of linking it. I actually have nothing in my Itunes library folder. You can also do this with purchased content as well. Just move the purchase content to a drive of your choice from the itunes library. Delete it from itunes. Then drag it into itunes from the new drive. I hope this all makes sense, let me know if you have any other questions.

How to use more than one ipod from one computer

I've got my 30gb ipod set up and working fine from my pc. I've got my wife an ipod nano and want to set her's up totally separately. How can I do this?

When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library
b) Creating Multiple Libraries in a single Mac or Windows user account
c) Creating multiple Mac or Windows user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): iPod - Syncing Music
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod and iPhone
Multiple Libraries
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Shift key in Windows when launching iTunes. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Create A New User Account In Vista

How to use more than one condition together?

Dear,
I want to set more than one condition type and use it together for any objects in page, for example page item,page button and etc.
Is it possible to handle in "PL/SQL Experssion" at condition type?(e.g =>"Request= Expression" and "Current page!= Expression 1",..) if no is answer, please tell me other ways.
Regards,
Saeed.

Hi Saeed,
Saeed Hassanpour wrote:
I'd like to know about CGI and Browsers conditions. Can I refer to document or essay about condition type in pl/sql?
    Yes, you can also refer CGI Environment Variables and Browser conditions in "PL/SQL Expression".
    For example :
The condition type "When cgi_env SERVER_NAME = Expression 1" can be transformed to "PL/SQL Expression" as:
OWA_UTIL.GET_CGI_ENV('SERVER_NAME') = 'MyServer'
The condition type for Browser condtions can be can be transformed to "PL/SQL Expression" as:
instr(upper(OWA_UTIL.GET_CGI_ENV('HTTP_USER_AGENT')),upper('Firefox/37.0')) > 0
    Following is old but comprehensive documentation about Condition Types:
    https://docs.oracle.com/cd/E14373_01/appdev.32/e11838/condition.htm#HTMDB25942
    Hope this helps!
Regards,
Kiran

How to use more than one page to design a form-like report???

Hi
I am designing a form-like report. and widening the repeating frame to contain all the page or the window like this page:
Image: !http://up1.m5zn.com/photo/2008/12/21/07/e728mos12.jpg/jpg!
Now there is no space at the window to complete designing the report!
How to make the repeating frame to contain more than one page or one window to complete designing the report?

change Vertical Panels per Page to 2 (or more as needed) for the Main Section of Layout Model.

How to map more than one xml element with some Paragraph in a Text Frame

Hi friends,
I am new in InDesign Java Scripting and I have to place or map, more than one xml elements of different parents, into one textbox. Is it possible through JavaScript? Can anyone help me in this because I have no idea how it should work and it urgently required.
Thanks in Advance

I had answered to you already in your first post: the short answer is that it's not possible on the same text box unless you assign a common ancestor of these two "parents" item. That's not a question of scripting, it's the way Indesign handle the XML with the layout. Import a xml in Indesign and drop tags to page item. What you can do manually is quite representative of what can be done through scripting.
If you assign this anscestor to the text frame, you have to expect that all text child items will be displayed in the text frame (including the text of all the child of the two "parents" and all the other parents/childs that could be under the common ancestor). Having a XML that is designed for Indesign usage is pretty much inevitable if you are doing anything "serious".

How to use more than one airport express with multiple speakers

Similar Messages

Maybe you are looking for