How to use multiple channels with one remoteObject .

hi,
I have an application which is accessed through HPPS some
times , also it can be access on server with http service.
so I want to know how to configure config files or add
runtime channels which will support either channel depending on
the server it is accessed over.
Is there any one who can help me to solve this...i need it
soon.
thank you...

Hi,
Please visit the URL below for details on adding channel sets
at runtime. Add multiple channels to the channel set so that the
fall back mechanism works.
http://livedocs.adobe.com/blazeds/1/blazeds_devguide/runtimeconfig_5.html#194376
Hope this helps.

Similar Messages

How to use multiple senders with one account

I have not moved from Entourage to Mail because I cannot figure out how to change sender addresses while using the same SMTP server.
It is easy to do in Entourage. Is it possible in Mail?
Thanks

Not sure what you mean, but associating multiple email addresses with the same mail account is described in Mail Help’s “Adding multiple email alias addresses to an account” article.

How to use multiple ipods with one computer

My 2 kids have an ipod touch each. How do I create their own files so that they do not have to have eachothers choices and games on eachothers device? As well, we have 2 iphones that are connected as well.

Yo should read the manual.
Open itunes, connect device, select what you want to sync, sync, disconnect device
Connect other device, select what you want to sync, sync, disconnect device
Connect other device, select what you want to sync, sync, disconnect device
Connect other device, select what you want to sync, sync, disconnect device

How to use multiple ipods on one account

I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

Take a look here:
How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Tektronix AFG 3022: How to use both channel with VISA

Hi all!
I am trying to control the AFG with LabView using the NI VISA driver. There are several given VIs I can use, but I don´t know how to use both channels at the same time correctly. I attached a VI I made.
Problems are:
-Sometimes it works, sometimes random errors occur.
-The waveform generation doesn´t start at the same time.
-To stop the waveform generation I used the "initialize VI" because I found no better one. Else the generation goes on and on, even though the task was terminated in LabView.
-How can I trigger the AFG with my NI 6259 in LabView?
I hope someone has some good ideas helping me out...
Best regards
Yopp
Attachments:
AWG_out_pulse_2ch.vi ‏36 KB

Hi Benjamin,
thanks for the replay. You helped me out very good! I had the Visa driver. I downloaded the driver in your link and it´s way better (more functionality) than the one I used. I now have a configuration, which is working. But there are two things I still doen´t know:
- How can I put out a trigger signal on the NI 6259. Am I doing this over the normal daqmx VIs? (I, by now, didn´t have the time to try it myself, maybe someone can give me a hint. Saves time...)
- I want to create two signals on the AFG that are the same, but one is inverted. At the AFG it is no problem (output menu-> invert on/off). This function doesn´t seem to be available in the driver. Is there a possibilty to modify the driver and create a VI with that functionality? Can anyone do this for me or explain to me what I need to do it myself and how to do it?
Best regards
Yopp

Photoshop crashes while using multiple windows with one image

Has anyone else encountered the following problem:
Photoshop CS4 crashes sooner or later when working with multiple windows with one image (window->arrange->new window for...).
I remember having same problem since CS2. Is this a bug in Photoshop or am I having a bad luck?
Technical specifics:
Ps CS4, iMac, 21.5, 10.6

Don't know. I haven't heard of other people having that problem.
Do you have a crash report I could look at?
Or have you attached your email to crash reports sent to Adobe and can you tell me the date on one of them?

How to use multiple channels to sample one signal

I would like to use all channels on an AI-110 to sample the same signal in order to increase my sampling rate. (I have spare channels, not spare $$.) In hardware the channels are read sequentially so in theory I should be able to do this, but I'm having trouble reconstituting the signal. If I use FP Reads the timestamps seem to indicate the time of the read, not the time of the A/D conversion, so I can't tell which sample was taken last. FP-Advise on change seems ill-suited as well since consecutive samples may be the same on a certain channel, but the signal may have varied in the mean time on the other channels.
Any ideas how this might be done otherwise? The VI will run embedded on a cFP-2020 controller with LabViewRT v. 6.1.1.
Thanks,
Anton

Anton,
I understand what you are trying to do and do not think it can be done with a single module. The timestamp on the FP-Read is all about when the vi returned the data and not when the A/D conversion occured. I just don't think that the A/D converter can keep track of the conversion time.
If you had multiple AI-110 modules, you could in theory connect your signal to individual channels on multiple modules and then sequence through the modules. The problem here would be the ground loops.

How to use Multiple Logos in One Smart Form?

All,
I have a client where they will have 2 logos for, e.g. "Invoicing" and want the form to decide which logo to print (based on plant code).
We are using Smartforms.
They want to use one form and based on the plant code - the form should determine which logo to print in the upper left corner of the invoice - how do you do this?
This is not like having text to print on the form in the same place - my understanding is the logo is NOT some variable you can "clear" in the program and then use the logo you wish to show up on the printout.
Does this have something to do with using multiple layouts within the same form? You define a layout for each logo and then within the Smartform logic determine which layout to print? And if that is true - does someone have sample code of how they determined which layout to use?
Thanks - and as always - points rewarded where helpfull!
Scott

Hi Scott,
Create two Graphics in Smartform window & place them wherver you want in the smart form.
Now in Graphics node, you can find 'Conditions' tab, under this you can give the conditions.
Hope this clue wil help you
Regards,
Sujatha

How do you use Multiple Hardrives with ONE Library in iTunes 7?

I have a large (approximately 3000 CD music collection) and I want to archieve it in Lossless format on several harddrives. I want iTunes to veiw the collection over several HD's as one Library.
Any Suggestions?

Hi jdmass,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iPhoto Help: Print your photos yourself
http://help.apple.com/iphoto/mac/9.5/#pht6e15dbdb
Select one or more photos.
Choose File > Print.
In the print options, select a theme (Fit, Fill, 8” x 10”, 5” x 7”, 4” x 6”, Custom, or Contact Sheet) from the list on the right.
Image of the options, showing the print themes
The preview area on the left shows how your photos will look when printed.
With some themes, such as Fill and Custom, you can click photos and use a scaling control to resize the photo in the frame. You can also drag the photo to reposition it within the frame. You may also be able to use other options, such as for resizing, choosing an aspect ratio, or setting margins, that appear depending on the theme you have chosen.
Select any necessary printer settings.
Click Print.
Specify print options in the Print window, and then click Print.
Cheers,
- Judy

How to use multiple formats in one JFormattedTextField

Hi,
I am looking for a way to allow multiple formats in the same JFormattedTextField. Let's say I want to allow input like:
a) 123-AB-123
and
b) AB-12345-CD
Of course I could use an InputVerifier of my own combined with regular expressions to see if the input matches. But I like the way JFormattedTextField supports the UserInput by displaying a Placeholder String. So the User sees what the input might look like.
I'd tried to write a FormatterFactory of my own, which will return either a MaskFormatter for a) or b) but the JFormattedTextField checks out the Formatter only when gaining or loosing focus. What should happen is that it checks out the formatter after each keystroke.
Does anyone know a solution for this or how I could force the FormattedTextField to REget it's formatter?
Thanks
Thimo

Check out the following; it provides code for a regular expression formatter:
http://java.sun.com/products/jfc/tsc/articles/reftf/
Unfortunately, this does not support the 'placeholder' notion like the MaskFormatter does, if that's what you were talking about. I'm not sure how you could cobble them together, since with the MaskFormatter you don't have to type the mask literal characters, but you would need to with the regular expression.
: jay

How to use multiple models in one Function module?

Hi,
In my FM i am using 2 models and if i dont completely exit the Function and use the same fm for another query based on another
model it is giving error saying invalid type.
if iv_type_of_search = 'A'.
start the application BT
    lv_bol_core = cl_crm_bol_core=>get_instance( ).
    lv_bol_core->start_up( 'BP_APPL' ).
get an instance of dynamic opporunity query
    lr_query = cl_crm_bol_dquery_service=>get_instance( 'BuilHeaderAdvancedSearch' ).
Contact Search
elseif iv_type_of_search = 'C'.
start the application BT
    lv_bol_core = cl_crm_bol_core=>get_instance( ).
    lv_bol_core->start_up( 'BP_APPL' ).
get an instance of dynamic opporunity query
    lr_query = cl_crm_bol_dquery_service=>get_instance( 'BuilContactAdvancedSearch' ).
*Opportunity Search
elseif iv_type_of_search = 'O'.
start the application BT
    lv_bol_core = cl_crm_bol_core=>get_instance( ).
    lv_bol_core->start_up( 'BT' ).
get an instance of dynamic opporunity query
    lr_query = cl_crm_bol_dquery_service=>get_instance( 'BTQOpp' ).
endif.
Any idea how to over come this or remove the instance of the old query and model every time its run?
it looks like the object of the last run is still there and i cant find any destructor method or way and
if i exit se37 it works fine....

Hi George,
You can also set up your model (component set) with the components you need.
Check it on:
SPRO->CRM->CRM Cross-Application Components->Generic Interaction Layer/Object Layer->Basic Settings
Kind regards,
Garcia

How to use multiple devices on one itunes account

I have one itunes account, three iphones and one itouch. How do we use the same itunes account be not share data, pictures, contacts etc?

Connect the iOS device, select it from the left column under "devices" and just don't check those items in iTunes:
Un-check the appropriate boxes for Contacts, etc. You can set these individual preferences for each iPhone and iPod Touch.

What is the best way to set up Facetime if using multiple computers with one apple ID?

I currently have FaceTime setup on my iPad 2 using my normal appleID, but have just recently upgraded our iMac from Leopard to Snow leopard, and have added FaceTime to that computer as well. So my question is this. If I want to avoid confusion with which device is called when someone calls us using FaceTime, what is the best way to distinguish the devices? Should I try to use a different email address to reach the iMac? Is there a best-known-method for this?

That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps.

How to use two iPhones with one iCloud account

I am really confused at how to set our iPhones up.
My wife and I each have an iPhone 5.
We have one iCloud account because we share our calendar and contacts.
I did get her her own iCloud account to add some calendar events I don't need to sync.
That is working all well and good.
The only problem is Siri. It says my name to her when she makes a request. So I went in to Siri and choose her name out of contacts. Then it starts calling me by her name on my iPhone.
Obvioulsy Siri is linked via iCloud and I am not seeing a setting to change that.
If we could share calendars between two different iCloud accounts all would be well.
Can we. Can I set my calendar up as something she can subscribe to?

Hi Friend,
About Siri, it must know who you are. To do that, go to: Settings>>General>>Siri>> My Information. There, you can select your own information, like name, phone number, home address, office address and so on.
About Calendars, you can set what you want to share with her, and what she wants to share with you as well. To do it, you must set it in two different places:
1o: Set with iCloud: Settings>>iCloud, there you can set if you want to sync with;
2o: Set which kind of calendars you want to sync: Calendars>>Calendars, there if you want to sync Calendars, but you won't sync your Work Calendars, unmark Work. It will private your Work Calendars just with your iPhone device.
3o: General settings of your Calendars: Settings>>Mail,Contacts,Calendars>>Calendars, there you can setthe period of events you want to sync and set your Standard Calendar.
Hope it will be helpful

How to use multiple events on one project?

I want to make a show reel, this obviously involves using various events.
I'm worried if I do this the whole file system will be a mess. Surely I should be sopying any files I want to use into the new showreel folder?
How can i do this?
Or is using various events ok?
Hope someone ca recomend the best way forward

You can edit from any event into the project. There is no need to copy the clips into a new event. When you're done you can archive the used clips into a new event.

How to use multiple channels with one remoteObject .

Similar Messages

Maybe you are looking for