How to use multiple events on one project?

I want to make a show reel, this obviously involves using various events.
I'm worried if I do this the whole file system will be a mess. Surely I should be sopying any files I want to use into the new showreel folder?
How can i do this?
Or is using various events ok?
Hope someone ca recomend the best way forward

You can edit from any event into the project. There is no need to copy the clips into a new event. When you're done you can archive the used clips into a new event.

Similar Messages

  • How to use multiple ipods on one account

    I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

    Take a look here:
    How to use multiple iPods with one computer
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • How to use Multiple Logos in One Smart Form?

    All,
    I have a client where they will have 2 logos for, e.g. "Invoicing" and want the form to decide which logo to print (based on plant code).
    We are using Smartforms.
    They want to use one form and based on the plant code - the form should determine which logo to print in the upper left corner of the invoice - how do you do this?
    This is not like having text to print on the form in the same place - my understanding is the logo is NOT some variable you can "clear" in the program and then use the logo you wish to show up on the printout.
    Does this have something to do with using multiple layouts within the same form?  You define a layout for each logo and then within the Smartform logic determine which layout to print?  And if that is true - does someone have sample code of how they determined which layout to use?
    Thanks - and as always - points rewarded where helpfull!
    Scott

    Hi Scott,
    Create two Graphics in Smartform window & place them wherver you want in the smart form.
    Now in Graphics node, you can find  'Conditions' tab, under this you can give the conditions.
    Hope this clue wil help you
    Regards,
    Sujatha

  • Using multiple harddrives for one project

    I'm about to purchase a new iMac and Final Cut Studio, and I have a question about harddrive setup. Currently, I have two external 320 GB harddrives I'm planning on using, and the iMac will come with an internal drive of 320 GB. This should be enough space to fit the estimated 468 GB of footage I'll have (36 hrs * 13 GB/hr for HDV is my calculation), but I've heard that there can be problems splitting a project across multiple harddrives. Should I upgrade the internal harddrive on the iMac to 750 GB so I can fit the project all on one drive?
    Thanks very much!

    Listen to what David said,
    don't use your internal disk as scratch disk, it will slow down your system, put it at an unnecessary risk .
    Are your drives FW connected or USB? If the case is the latter use your drives as back up drives and for more efficiency get at least FW400 drives and in the future do take into consideration bigger drives, 320 GB when editing video on a regular basis is peanuts.
    Here some suggestions:
    http://www.CalDigit.com/index.asp
    http://www.dulcesystems.com/html/products.html
    http://www.g-technology.com/Products/Products.cfm

  • How to use multiple devices on one itunes account

    I have one itunes account, three iphones and one itouch.  How do we use the same itunes account be not share data, pictures, contacts etc?

    Connect the iOS device, select it from the left column under "devices" and just don't check those items in iTunes:
    Un-check the appropriate boxes for Contacts, etc. You can set these individual preferences for each iPhone and iPod Touch.

  • How to use multiple formats in one JFormattedTextField

    Hi,
    I am looking for a way to allow multiple formats in the same JFormattedTextField. Let's say I want to allow input like:
    a) 123-AB-123
    and
    b) AB-12345-CD
    Of course I could use an InputVerifier of my own combined with regular expressions to see if the input matches. But I like the way JFormattedTextField supports the UserInput by displaying a Placeholder String. So the User sees what the input might look like.
    I'd tried to write a FormatterFactory of my own, which will return either a MaskFormatter for a) or b) but the JFormattedTextField checks out the Formatter only when gaining or loosing focus. What should happen is that it checks out the formatter after each keystroke.
    Does anyone know a solution for this or how I could force the FormattedTextField to REget it's formatter?
    Thanks
    Thimo

    Check out the following; it provides code for a regular expression formatter:
    http://java.sun.com/products/jfc/tsc/articles/reftf/
    Unfortunately, this does not support the 'placeholder' notion like the MaskFormatter does, if that's what you were talking about. I'm not sure how you could cobble them together, since with the MaskFormatter you don't have to type the mask literal characters, but you would need to with the regular expression.
    : jay

  • How  to use multiple channels with one remoteObject .

    hi,
    I have an application which is accessed through HPPS some
    times , also it can be access on server with http service.
    so I want to know how to configure config files or add
    runtime channels which will support either channel depending on
    the server it is accessed over.
    Is there any one who can help me to solve this...i need it
    soon.
    thank you...

    Hi,
    Please visit the URL below for details on adding channel sets
    at runtime. Add multiple channels to the channel set so that the
    fall back mechanism works.
    http://livedocs.adobe.com/blazeds/1/blazeds_devguide/runtimeconfig_5.html#194376
    Hope this helps.

  • How to use multiple senders with one account

    I have not moved from Entourage to Mail because I cannot figure out how to change sender addresses while using the same SMTP server.
    It is easy to do in Entourage. Is it possible in Mail?
    Thanks

    Not sure what you mean, but associating multiple email addresses with the same mail account is described in Mail Help’s “Adding multiple email alias addresses to an account” article.

  • How to use multiple models in one Function module?

    Hi,
    In my FM i am using 2 models and if i dont completely exit the Function and use the same fm for another query based on another
    model it is giving error saying invalid type.
    if iv_type_of_search = 'A'.
    start the application BT
        lv_bol_core = cl_crm_bol_core=>get_instance( ).
        lv_bol_core->start_up( 'BP_APPL' ).
    get an instance of dynamic opporunity query
        lr_query = cl_crm_bol_dquery_service=>get_instance( 'BuilHeaderAdvancedSearch' ).
    Contact Search
      elseif iv_type_of_search = 'C'.
    start the application BT
        lv_bol_core = cl_crm_bol_core=>get_instance( ).
        lv_bol_core->start_up( 'BP_APPL' ).
    get an instance of dynamic opporunity query
        lr_query = cl_crm_bol_dquery_service=>get_instance( 'BuilContactAdvancedSearch' ).
    *Opportunity Search
      elseif iv_type_of_search = 'O'.
    start the application BT
        lv_bol_core = cl_crm_bol_core=>get_instance( ).
        lv_bol_core->start_up( 'BT' ).
    get an instance of dynamic opporunity query
        lr_query = cl_crm_bol_dquery_service=>get_instance( 'BTQOpp' ).
      endif.
    Any idea how to over come this or remove the instance of the old query and model every time its run?
    it looks like the object of the last run is still there and i cant find any destructor method or way and
    if i exit se37 it works fine....

    Hi George,
    You can also set up your model (component set) with the components you need.
    Check it on:
    SPRO->CRM->CRM Cross-Application Components->Generic Interaction Layer/Object Layer->Basic Settings
    Kind regards,
    Garcia

  • Can you use multiple TOCs in one project at different times?

    I am new to RoboHelp and I have version 11. The premise is that I have inserted a map of the United States and I have placed and image map for each state to direct them to the individual state's topic I have created. But I want to customize each state's table of contents. Is that possible? If so how is it done? Any help is much appreciated.
    Thank you.

    Can we step back and clarify what you mean by customising each state's TOC?
    The image map takes the user to a topic for that state. If the project is set to keep the topics synchronised to their position in the TOC, the user will see what you have set up in that states chapter.
    What is it that you want to happen that is not provided by that?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How to use multiple ipods with one computer

    My 2 kids have an ipod touch each. How do I create their own files so that they do not have to have eachothers choices and games on eachothers device? As well, we have 2 iphones that are connected as well.

    Yo should read the manual.
    Open itunes, connect device, select what you want to sync, sync, disconnect device
    Connect other  device, select what you want to sync, sync, disconnect device
    Connect other  device, select what you want to sync, sync, disconnect device
    Connect other  device, select what you want to sync, sync, disconnect device

  • Help wanted - step by step process on how to use two ipods on one computer

    I'm just in the process of getting an ipod (waiting on delivery!) and want to know how it is possible to have two ipods using the same computer but synchronizing differently. I don't want to risk losing my partners music (he'll be very upset!) and I don't want to end up with his music on my ipod. I'd appreciate it if someone could give me a step by step guide or tell me where the best place to look for the answer is. Is it possible somehow to have two different libraries on one computer? Is that how it works?

    There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two as Chris has already described above is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer

  • Can someone tell me how to use 2 ipods on one computer

    well when anyone can ill be waiting for the answer i want to know cuz since im buying the ipod video i want to see if i can use the same computer that im uploading stuff to my ipod mini

    There is no limit to how many iPods can run on a single PC. Or how many PCs a single iPod can connect to. Either by Apple design or by any legal issues.
    These links should help:
    Natalie Beresford: Multiple iPods/iTunes Installations
    How to use multiple iPods with one computer
    How to share music between different accounts on a single computer

  • HELLP!! NEED TO KNOW HOW TO USE TWO IPODS ON ONE COMP!ASAP

    i have an ipod nano and an itunes account. Now my mom has a nano and we need to know if you can register them on the same account and how or any other tips for using two ipods on one comp!
    PLEASE HELP ASAP!
    ZACH

    Hello Zach,
    There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer

  • Has anyone used more than one event for one project?

    Hi,
    I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it.  I waited to see if I would get used to it.  But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'.  The separation of the media and projects creates more problems than solutions with my workflow.
    The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same.  The new Event and Project system adds complexity to organization and archiving.  I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly.  I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
    Has anyone out there used more than 1 Event for 1 Project?  Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project.  I don't need to use the media from multiple Events for the same Project.  And I've never used it for a reason.  I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project.  I think we should bring back the connection between Events and Projects in a meaningful way. 
    This is a throw back to the older days, but that's not always a bad thing.  Let us keep our projects, or timelines, in the Events folder.  Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section.  Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
    Thanks,
    - David

    My original fear was that FCPX was just going to be iMovie Pro... It so is not!
    People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows.  For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder.  I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
    But that's me.
    Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
    Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
    By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.]  You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

Maybe you are looking for