How to use multiple Mac's to burn a bunch of dvd's ?

I have major G5 Mac with a big screen. 2 second Mac's (iMac and Mac Mini are also around) The dual G5 is good to work with FCP and dvdsp, the iMac and Mac Mini not.
I use the following scenario:
- One FCP Projekt with multiple Sequenzes
- compressor creates the output files with standard template settings
- Then copy the rendered output files to the destination Mac's and import the
Media.
- Finaly burn on all 3 Mac's at the same time
Because i have that trouble in realising this aproche, the idea might be wrong or i overlook someting.
If you start a new project with dvdsp or you "switch" to a other project,
do you use different folders,location where the encoding etc. is done ?
There is a preference section in dvdsp where you can select different location.
Default is $home / cache / dvdstudio pro / ...
Thanks and regards
Sven

Found two good answers in the forum from preivious questions:
If i have burned a dvd, i can just format all the others
(because the VIDEO_TS and AUDIO_TS is allreday done.
Copy the VIDEO_TS and AUDIO_TS onto any copy maschine while using Toast for example. DO NOT CLICK INTO THOSE FOLDERS.
Version 5.x of TOAST made trouble if you do so ...
Currently i am trying both Methodes.
I keep you up to date
Regards
Sven

Similar Messages

My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

https://discussions.apple.com/message/16371308#16371308

How to use multiple ipods on one account

I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

Take a look here:
How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?

Hi!
Question about the problem mentioned in subject.
I have configured that JNLP opens with 1.5 version, both versions are enabled in Java Control Panel Runtime Settings but when I try to start a desktop java console says:
Java Web Start 1.5.0_22
Using JRE version 1.6.0_07 Java HotSpot(TM) Client VM
And the opening of the desktop creates an exception:
Java Web Start - Invalid Argument Error
TooManyArgumentsException[ Too many arguments supplied: {C:\WINDOWS\Temporary, Internet, Files\Content.IE5\....
I'm trying to open my desktop with 1.5 version and other programs with 1.6 version. What is it that I still need to do? I'm kind of confused with this. Some of my collagues have succeeded with this and some doesn't, with the same configuration.
So the question is, how to use multiple JREs with IE8 so that one application uses 1.5 version and others 1.6 version?
Br,
Katri
Edited by: ka**** on 09-Mar-2011 01:16
Edited by: ka**** on 09-Mar-2011 03:16

ka**** wrote:
..Question about the problem mentioned in subject.No "Using multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8" is a statement. To transform it to a question would be something like "How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?".
Once you can come up with an actual question, I might look at this more closely.

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

How to use multiple iPods

I have multiple iPods & iPhones & I'd like to share my library with them all. How do I do this??? How can I share content outside of purchased iTunes?

See this for some tips: How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

How To Use Multiple Currencies in single payroll ........

Dear All
Can you help me How To Use Multiple Currencies in single payroll?
with regards
User600722

I am not a functional expert. but ML Note 150173.1 (which is quite old) states that this is not possible.
Srini

How to use multiple statements inside the "THEN" block of CASE statement?

Below is the code:
SET @strTempString = case @strKeyMode
WHEN 'AUTO/CYCLE'
THEN @strRefID + '|' + @strRetID
WHEN 'CYCLE'
THEN @strRefID + '|' + @strRetID
WHEN 'COMMERCIAL'
THEN @strRefID + '|' + @strRetID
WHEN 'ISNAP'
THEN set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + ' ', 2) + ' ', 2))))
'' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType
WHEN 'ASNAP'
THEN @strRefID + '|' + @strRetID
WHEN 'MOAT'
THEN @strRefID + '|' + @strRetID
else '0'
end
The first 3 conditions are understandable. How to use multiple statements in 4th case?
Here I first want to set the value as:
set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + ' ', 2) + ' ', 2))))
and then return the string '' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType to @strTempString.
Please help me remove the syntax errors.
Thanks in advance.

Try below SQL
DECLARE @strKeyMode varchar(20) = 'ISNAP'
DECLARE @SQL VARCHAR(MAX)
DECLARE @strRefID int=1
DECLARE @strRetID INT=2
--FIRST WAY
IF @strKeyMode ='AUTO/CYCLE'
SELECT CAST(@strRefID as varchar(10))
ELSE IF @strKeyMode ='CYCLE'
SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
ELSE IF @strKeyMode='ISNAP'
SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
ELSE
SELECT @SQL='ABC'
print @sql
----SECOND WAY
SELECT @SQL = CASE @strKeyMode
WHEN 'AUTO/CYCLE' THEN CAST(@strRefID as varchar(10))
WHEN 'CYCLE' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
WHEN 'ISNAP' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
ELSE 'No Record'
END
PRINT (@SQL)
--Prashanth

How to use multiple classes for each form

Hi,
I have created two forms using screen painter and now i want to use different classes for these two forms .
I have declared the Sbo Connection in main class i.e. Set Application ,Connection Context() but while connecting to other classes
for executing the code for that form SAP is not connected to that class.How to use multiple classes functionality i don't able to
do that.Please provide some sample codes for that as it will be more helpful for me to understand.
Thanks & Regards,
Amit

Hi Amit,
In fact, its more advisable to use separate classes for every form that you use. Have one common class, say, for eg., clsMain.cs which has all the connection and connectivity to other classes, wherein, the menu event and item event of this main class, will just be calling the menu / item event of other classes.
The individual functionality of the child classes will be called from the item / menu event of the respective classes.
Item event in clsMain.cs will be as below.
private void oApplication_ItemEvent(string FormUID, ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
            SAPbouiCOM.Form oForm;
            BubbleEvent = true;
            try
                if ((pVal.FormTypeEx == "My_Form1Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
                    oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
                    NameSpace.Repots.ClsForm1.ClsForm1_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
                if ((pVal.FormTypeEx == "My_Form2Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
                    oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
                    NameSpace.Repots.ClsForm1.ClsForm2_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
Now, in the individual classes, you can have their respective item events, which will be called from the main class, and the respective functionalities will occur.
Hope this helps.
Regards,
Satish.

How is that the MAC address (BIA : Burn -in -Address) not yet exhausted?

How is that the MAC address (BIA : Burn -in -Address) not yet exhausted? IPV4 is exhausted and we are moving to IPV6!

MAC addresses are 48 bits long. That is 65536 times the IPv4 space. IP addresses need to be globally unique while MAC addresses only need to be unique on their local LAN segment (LAN/VLAN).
Here is a good link explaining it more in detail:
http://blog.michaelfmcnamara.com/2013/03/are-we-running-out-of-mac-addresses/
There is also a link there that suggests some edits to the 24-bit OUI assignments:
http://www.ietf.org/proceedings/86/slides/slides-86-iab-techplenary-5
Daniel Dib
CCIE #37149

E4200 v2 - Uses multiple MAC addresses for the same device

This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

How to use multiple tape drive for single filesystem on single client.

Hello All.
I want to backup single filesystem with multiple tape drive.
Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
Backup client has a single backup filesystem like /data1 directory with 4 LTO6 drives.
/data1 directory doesn't have a sub-direcotry, just present a files.
If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
Please anybody answer the questions.
Thanks advanced.

See how to use multiple tape drive from single client when I want to backup single filesystem?

How to use multiple midi controllers with Mac book pro (2 usb)?

I have a newer macbook pro that has 2 USB ports, and a lightning port and a firewireport.
On stage I will be using the firewire port connected to a Presonus Firestudio mobile to use as the interface to the house mixer.
I will use 1 USB for my M-audio Axiom 61
I will use the other for my Yamaha WX-5 Wind synth
I'd like to be able to get the apogee midi foot controller to control the playback audio. For example I'll be using it to stay in a solo section, then step on it to move it forward ot the next section when I am done soloing
I'd also like to use some sort of midi switch to turn on vocal effects of the mic.
Anyway since I only have 2 USB ports, how should I connect the 3rd, or 4th USB midi controller?
Will a USB hub work to do this? If so, will I always have to remember to use the same controler in the same exact hub input to make sure everything maps the same?
I guess I'll also have to learn how to setup multiple controllers in Mainstage as well.
Thanks
Dan

Hi there,
is a question which many of us have spent ...
I think the obvious answer is that yes you can use a hub and connect everything. however ....
sincerely advise you to buy a good hub that is well feasible, the last thing you want on stage / rehearsal is one of midi controllers stop responding, or stay with hanged notes... etc., do not buy just because it is cheap it has to be stable and viable, some bring cable for connecting wall power just to not drain power from the USB port.
Other things to try is to distribute as much equipment for USB / Midi.
For example one of midi controllers connect via USB but not by Midi outside the Presonus Firestudio. Connecting Presonus Firestudio to a single USB port as it is a main equipment.
but it really is an issue that greatly limits the use of USB devices.
Try it and tell me how it went. Good luck
(sorry for my english i´m Portuguese)

How to use multiple Mac's to burn a bunch of dvd's ?

Similar Messages

Maybe you are looking for