How to use multiple tape drive for single filesystem on single client.

Hello All.
I want to backup single filesystem with multiple tape drive.
Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
Backup client has a single backup filesystem like /data1 directory with 4 LTO6 drives.
/data1 directory doesn't have a sub-direcotry, just present a files.
If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
Please anybody answer the questions.
Thanks advanced.

See how to use multiple tape drive from single client when I want to backup single filesystem?

Similar Messages

How to use multiple tape drive from single client when I want to backup single filesystem?

Hello All.
I want to backup 1 filesystem using 4 tape drives for reducing backup time.
In case of symantec veritas netbackup, they can user "NEW_STREAM" for multi-streaming backup.
Please anybody let me know that how to do use multiple tape drive for single client.
1. Backup Source server : Linux (1 client)
2. Backup Soucre : /data1 (500GB)
-> Current directory structure doesn't have sub directory under /data1, just files present under /data1
If direcotry struceture has a sub-direcotry like( /data1/aaa, /data1/bbb ), Is it availble to use multiple tape drives?
3. Tape Drive with OSB : LTO6 * 4 drives
Thank you.

You would have to create a different dataset for each sub-folder. If you only have files at the top level folder then even the NEW_STREAM option couldn't be used to split the job.
Organise it into folders and then create datasets in a client folder such as :
/usr/local/oracle/backup/admin/config/dataset/Linux/data1_aaa
/usr/local/oracle/backup/admin/config/dataset/Linux/data1_bbb
Then in the schedule you just specify the Linux folder. In each dataset you list the hostname and the folder name, such as :
include host Linux
include path /data1/aaa
Now it will create a new job for each dataset and therefore each folder.
Thanks
Rich

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Using Multiple Hard Drives for iTunes Storage

I am running out of room on my current hard drive and want to use a new external hard drive to add space. My problem is I want to use both hard drives for storage (not the same music). Is this possible as I have only been able to direct iTunes to one hard drive? Thank you.
Dual G5 Mac OS X (10.4.5) 400GB Raid set

When you change the location in iTunes preferences what you are doing is telling iTunes where ripped music should be put. It isn't changing where iTunes should look for music that is already in the library. So go ahead and change the location to where you want music to be stored from now on. iTunes won't lose the other music. (At one times my iTunes library was spread over 4 drives.)

SRP547W, How to use multiple WAN IPs for port forwarding?

Hi folks,
We've run into some difficulty trying to take advantage of multiple WAN IPs in conjunction with the SRP547, and I'm hoping someone here can help out or at least tell us that we're going to need to buy a different router...
What we're trying to acheive is the ability to port forward from our distinct public IPs to different internal servers. Looking at the options under Port Forwarding it looks like we can only configure forwards at the "WAN interface" level, but our problem is that we can't work out how to set up separate interfaces for each of our Public IPs...
Our ISP provides us with a fully managed NTU/router with a single "Internet" ethernet port, which we can use by statically configuring IPs on our end. For this configuration this port has been directly patched to the WAN ethernet port on the SRP547W.
We have been allocated a 255.255.255.248 (/29) subnet, giving us 5 usable IPs after the ISP's gateway address is taken into account, like so:
a.b.c.208     Network Address (/29 subnet)
a.b.c.209     ISP Gateway
a.b.c.210     IP1
a.b.c.211     IP2
a.b.c.212     IP3
a.b.c.213     IP4
a.b.c.214     IP5
a.b.c.215     Broadcast Address
On the SRP we've set up the default "Ethernet WAN2" sub-interface with the following details for IP1
VLAN ID:               4088 (Uneditable)
Connection Type:       Static IP
Internet IP Address:   a.b.c.210
Subnet Mask:           255.255.255.248
Default Gateway:       a.b.c.209
The next step (I would have thought) would be to add a second sub-interface, using similar info for IP2
VLAN ID:               4000 (Chosen arbitrarily)
Connection Type:       Static IP
Internet IP Address:   a.b.c.211
Subnet Mask:           255.255.255.248
Default Gateway:       a.b.c.209
When we try to do so however we get:
Fail!
Conflict with Ether_WAN2 interface address type
I should mention at this point that we're running on firmware version 1.02.01 (023).
Any suggestions on how we can proceed?
Is there a CLI or other method of configuration that might work if the web interface won't?
Thanks,
Tim.

OK, I've seen reference to this solution before but not much in the way of details. Perhaps you can spell out how this ought to work, as the Software DMZ doesn't behave as I'd expected it to.
As before, on the SRP we've set up the default "Ethernet WAN2" sub-interface with the details for IP1 with a /29 subnet.
VLAN ID:               4088 (Uneditable)
Connection Type:       Static IP
Internet IP Address:   a.b.c.210
Subnet Mask:           255.255.255.248
Default Gateway:       a.b.c.209
We'd now like to expose a server function on IP2, let's say LAN details for this server are:
VLAN:                  3000
VLAN IP Range:         192.168.1.1/24
Server IP:             192.168.1.10
Server Port:           80
So first we turn on Software DMZ:
Status:                Enabled
Public IP:             a.b.c.211
Private IP:            192.168.1.10
WAN Interface:         Ether_WAN2
My understanding, based on what you've said, is that this should expose the whole server to external access via IP2. Unfortunately, it doesn't seem to work this way - we don't seem to have any access at all. Perhaps there's a default deny rule on the firewall?
Just to be sure, I tried creating a rule to allow HTTP traffic to the server in the Advanced Firewall page.
In Interface (WAN):    All
Out Interface (LAN):   VLAN.3000
Source IP:             0.0.0.0
Source Subnet:         0.0.0.0
Destination IP:        192.168.1.10
Destination Subnet:    255.255.255.255
Protocol:              TCP
Source Port:           Any
Destination Port:      Single:80
Action:                Permit
Schedule:              Everyday
Times:                 24 Hours
Still no dice. What am I missing?
Cheers,
Tim.

How to use an external drive for windows and mac

I recently got an external hard drive (2 TB seagate expansion) and I need to be able to use it with both my mac and my windows computer. I have read numerous forums and tried downloading various third party programs but nothing seems to work! One of the things i have read was to create a partition on the drive, this is easy enough and i did try it so i do have one side i can add stuff from from windows and one side i can add stuff to from my mac but then i cant access the other side. So say i need to get a file from my mac to my windows. I add a file to the mac side of the partition from my mac but then when i plug it into windows i cant retrieve that because its on the mac side of the partition (and vis versa). Is there some sort of easy way around this? or some way in which i can format the drive where i can move files back and forth from windows to mac without any expensive third party programs?
Thanks!
Bryan
PS. I did notice when i originally got the hard drive i had a bunch of files on it that were added from windows. When i plugged it into my mac i could see and copy these files but i could not add new files. Is there anyway to get around this "read only" type formate if i were to reset my drive back to its factory settings?

Three ways to go;
Repartiton the drive (1 partition) as MBR and with FAT32 file system. This is readable and writable by both Mac and Windows, but has a file size limit (which I think is 4GB).
The alternative is to leave the drive formatted as NTFS for Windows (this is not normally writeable from Mac) and employ a third-party software application which can write to NTFS. NTFS-3G, Paragons NTFS for Mac and Tuxera NTFS have all been recommended elsewhere.
Or you can repartition as GUID with HFS+ (Mac OS Extended Journalled) file system. This would not normally be accesible to the Windows machine, but once again there is 3rd-party softwsre available to enable Windows to read and write to it. MacDrive is the only one I'm aware of, but there are probably others.

How to use multiple hard drives with RnR??

I am backing up my T61p's 500GB internal hard drives to an 750GB external USB. I just got a 1.5TB FreeAgent Seagate. I want to use that drive too to backup. I want to keep the backups that are currently on the 750GB. I simply want to *also* make a full backup to the 1.5TB. Is there an easy way to create multiple backups on multiple drives with Rescue & Recovery?
Once you choose an initial destination (USB drive), there does not seem to be an easy way to start backing up to another drive. Did I miss something?
Thanks,
Michel

Hello,
Sorry you're having problems. Assuming you've already mounted the drive so that an external drive icon appeared on the desktop, what DO you see when you open it? ANY files?
Did any of those "weird things" include okay/cancel windows?
Is your external drive fat32, NTFS, or something else? OSX doesn't play nice with all types of partition types, so this information could help us help you.

How many types of tape drive

Hi all;
how many types of tape drive for rman backup.which one is best.
thanks

Hi,
Below Are the factors ...
•The amount of data you must back up
•The interfaces your equipment supports
•The data throughput you need
•The tape standard that is best for your needs
•The cost of the drive and tapes
•The capabilities and compatibility of the included driver and backup software
•Support for disaster recovery
Read below links u will get some help.
http://e-articles.info/e/a/title/How-to-choose-a-Tape-Backup-Drive/
Thanks & Regards
Rahul Sharma

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

How To Use Multiple Currencies in single payroll ........

Dear All
Can you help me How To Use Multiple Currencies in single payroll?
with regards
User600722

I am not a functional expert. but ML Note 150173.1 (which is quite old) states that this is not possible.
Srini

I would like to use an external drive for the iPad I just purchased for my husband? How can I accomplish this is there an accessory that would allow me to use a USB

I would like to use an external drive for storage on the ipad I just purchased. How can I do this?

You can't attach drives to any iOS device.
Having said that, there are some drives with built-in wifi routers that a device can connect to. These would behave like a cloud device in which some of your apps might be able to connect.
Try googling to find some brands.

How to use multiple classes for each form

Hi,
I have created two forms using screen painter and now i want to use different classes for these two forms .
I have declared the Sbo Connection in main class i.e. Set Application ,Connection Context() but while connecting to other classes
for executing the code for that form SAP is not connected to that class.How to use multiple classes functionality i don't able to
do that.Please provide some sample codes for that as it will be more helpful for me to understand.
Thanks & Regards,
Amit

Hi Amit,
In fact, its more advisable to use separate classes for every form that you use. Have one common class, say, for eg., clsMain.cs which has all the connection and connectivity to other classes, wherein, the menu event and item event of this main class, will just be calling the menu / item event of other classes.
The individual functionality of the child classes will be called from the item / menu event of the respective classes.
Item event in clsMain.cs will be as below.
private void oApplication_ItemEvent(string FormUID, ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
            SAPbouiCOM.Form oForm;
            BubbleEvent = true;
            try
                if ((pVal.FormTypeEx == "My_Form1Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
                    oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
                    NameSpace.Repots.ClsForm1.ClsForm1_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
                if ((pVal.FormTypeEx == "My_Form2Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
                    oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
                    NameSpace.Repots.ClsForm1.ClsForm2_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
Now, in the individual classes, you can have their respective item events, which will be called from the main class, and the respective functionalities will occur.
Hope this helps.
Regards,
Satish.

How to use Multiple Homes on Windows Box for patching

Reading an Article by Arup Nanda 04.23.2007 talks about using multiple oracle homes for patching. We've installed oracle again and now have 2 Oracle Homes (db_1 and db_2). If I look at my service startup for the database I see this:
c:\oracle\product\10.2.0\db_1\bin\ORACLE.EXE TestDB.
If I try and start my database out of the db_2 install I'l receive errors about the init file not being located in the db_2 location. Should I copy all my files from db_1 over to db_2?
thanks.

I'l receive errors about the init file not being located in the db_2 locationYes, of course. Otherwise the Oracle Home will never know the location of the init.ora at the old location.

How to use multiple tape drive for single filesystem on single client.

Similar Messages

Maybe you are looking for