How to use ' NAVIGATION- GOTO_PAGE' goto a new page

Hello friends.
when I use a hyperlink.
I can open a new page by set target="_blank" or target="_parent" etc.
How can do the same thing by using
NAVIGATION->GOTO_PAGE(mypage.htm)
in OnInputProcessing.
Thank You.

Hi Meiok,
have a look at thread Navigation in BSP, this might give you some ideas for the solution.
Regards,
Rainer

Similar Messages

How to use a formula for dynamic New Page After?

There is a formula for dynamic New Page After.
How do I get value of formula?
I am using RAS and the ReportClientDocument.

There is a section object. Off that there is a format property that is of type sectionformat. From there there is a ConditionFormulas property which I believe is a collection of all the formulas you can set for a section.

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to Use Home+End Key on new short usb apple keyboard on XP

How to Use Home+End Key on new short usb apple keyboard on XP
now i use macbook and new short apple keyboard.
it hasn't Home and End key. i try to use Fn + -> , Fn + <-
it cann't do that. How can i set the Fn + <- be Home key
and Fn + -> be End key like on my macbook keyboard
thank you for answer

Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
I hope that now you have an idea what I’ve done…
Good night
Björn
PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

How to use BAPI to add a new version for a claim number in WTY transaction.

How to use BAPI to add a new version for a claim number in WTY transaction.
I am using function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
It needs to copy all contents of previous version to a new version.
While doing so i am unable to copy fields like valic valoc etc. Any ways by which i can copy this values.
WTY will update PNWTYH , PNWTYV and PVWTY tables.
Thanking you,
Lokesh.

Hi Vishnu,
You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
Rewards point if you think this info is useful
Regards,
Dipender Singh

How to use old nano ipod on new computer

How to use old nano ipod with new computer

Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How to use a back button in action pages?

Hi all,
I have created a user login page,home page and user profile page.
If the user provide correct username and password in the login page he will be taken to home page.
In the home page he will be having his username and a link to view his profile.
When the user click on the link "My Profile(user profile)" he wil be taken to that page.
In my profile page the user can edit only his firstname,lastname and password .
On the user profile page i have placed a Back Button(using javascript: on onclick event i have used history.back()) to go back to home page after editing his profile.
If the user edit his profile for n-number of times then atlast if he wants to go back to home page-then he wil cilck the back button.
Now the problem occurs like the back button not going to home page and it simply going back with the edited history.
How to use a back button in action pages; without repeating the actions done on the page; how to redirect to the users home page?
I simply used the hyperlink in userprofile page to go to home page but when i click onit it is displaying blank home page.
I'm using hibernate orm mapping; cflogin and cflogout tags.
Any help appreciated,
Chandru P

chandrup wrote:
Hi Dan,
Dan Bracuk wrote:
Use an anchor tag.
I simply used the hyperlink(<a href="home.cfm">Home</a>) in userprofile page to go to home page but when i click onit it is displaying blank home page.
I can see your problem. You may use javascript:history.go(-1), javascript:history.go(-2), ..., to go back one page, two pages, and so on. But how does one go back an arbitrary n pages? The link href="home.cfm" isn't a good solution for the browser. It makes a new call to the server which, as you may have discovered, can overwrite all the changes made at the browser.
You should use the Javascript variable history.length. If you open n links in succession, starting from page0.cfm, then the browser holds the value of history.length as n. So, experiment with something like
<a href="javascript:history.go(-history.length)">Go home</a>
or
<a href="javascript:history.go(-history.length+1)">Go home</a>

How to update table styles in the new Pages?

Anyone found out how to update table styles in the new Pages? I see it's done in some of the templates that Apple provided, but I can't find it. Also, the Copy table style command is gone, so I can't make my tables look in a uniform way, unless I use one of the built-in styles.
Thanks.

I'm having the same trouble. Looks like no way to create an overal 'table' style and I cannot access the table paragraph styles either.

How do I save documents from the new Pages into a Word Document

How do I save documents from the new Pages into a Word Document?

Thank you so much - so simple! I had been using the 'share' option (worked in old Pages) and only had icloud or email as options. I have to attach word documents to emails to send to work. I don't want to use icloud because it's too public and I don't trust it. Also, you have to be able to access the internet and I need word documents on my USB stick for work where there's no internet.
I love my Mac but I do wish Apple would remember those of us living in less-than-perfect computer-land.
Thanks again
Lindsay

How do i mail merge with the new Pages and Numbers?

How do I mail merge with the new Pages and Numbers?
On Pages 09 I have a document that draws variable data from a spreadsheet created in Numbers.
With the new Pages and Numbers program update, my links are lost and I am unable to see how to correct this.

Thanks Peter,
very disappointing.
My Pages 09 keeps opening in the new one.
I dont think they want me to be a loyal customer anymore.
They changed Final Cut Pro, so now I use Premier Pro
Aperture 3 has been left behind so now I moved to Lightroom 4.
And now Pages 5 does not have a vital component, so back to Word.
Sad day
Thanks again

How to use Apache MyFaces components in JSF pages + Eclipse?

I've managed to write my JSF web app. in Eclipse jee, and test it on JBoss 4.2 GA, within Eclipse, but how to import Apache MyFaces components into Eclipse JSF plug-in?
If I can't import it nicely, how to use those components directly in JSF pages?

The Tomahawk component library provides MyFaces components. Install it as you would any other component library.
http://myfaces.apache.org/tomahawk/

How do you rotate a table in 'new' pages?

How do you rotate a table in 'new' pages, all my tables have spun round and I cant put them back?

Thanks I tried to get my original doc back, but it wouldnt open, tried via time machine and that was locked too!
Eventually had to save as a pages 09 doc, then reopen in pages 09 and turn everything back round
Think i will stick with the old verision for now!

How to use warn about changes property with page menus

how to use warn about changes property with page menus

Hi,
If u will enable this property, then u will get warning message as a popup in case of change of state of VO.
Regards,,
Gyan

How to use Navigation Pages in Portal

Hi
In Portal Under Page Groups we have different type of pages like
Pages,
Templates,
Categories,
Navigation Pages,
Perspectives,
Styles,
Attributes,
Page Types,
Item Types,
I have created a navaigation Page under Navigation Pages.
I have given access to a set of users.
I am not able to set those Navigation page as default home page.
How to set this Naviagtion page as a default home page.
How to use this can anyone help on this.
Thanks

The easiest way would be to publish your navigation page as a portlet. Then create a page template (or more) for your pages and add your navigation page as a portlet (from the repository).
Regards,
Albert

How to use ' NAVIGATION- GOTO_PAGE' goto a new page

Similar Messages

Maybe you are looking for