How to use non default port 1521 while 11.2.0.1 grid upgrade to 11.2.0.2

Hi Team ,
We are planning 11.2.0.1 Grid infra rolling upgrade to 11.2.0.2 with out any downtime.
But while up gradation due to default scan port 1521 , 11.2.0.1 databases are not able to connect (remote connections)
We are using 1900 port for existing 11.2.0.1 grid infra scan.
While up gradation it is taking default port of 1521 insted of existing port 1900.
Please provide the solution to use non default port while 11.2.0.2 up gradation.
After upgrade the status as below.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
Here I was getting TNS:no Listener errors from the client connections.
I have modifyed the scan port then it is working fine.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl modify scan_listener -p TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4>
Here the problem is we need to do the grid infra upgrade with out downtime,but due this default port issue clients are not able to connect to the database.
Thanks
Bala
Edited by: user12032334 on May 31, 2011 11:46 AM

Why are you using a non default port? It does not improve security. It makes network management more complex. And causes the type of issues that you are facing now.
So before changing defaults, make sure that your reasons are technically sound. And using port 1900 when 1521 is available, is not technically sound by any means.
As for addressing the problem you have created for yourself by mucking around with port numbers. Use a NAT firewall (on each RAC node) to rewrite packets headers received on port 1900 and send these to the server's port 1521 instead (on the VIP or static IP as required).
This can be fairly easily done using iptables if your o/s is Linux. You need to:
a) create a pre-routing NAT rule
b) create a post-routing NAT rule
c) create a forwarding filter rule for port 1900/tcp
d) create an input filter rule to accept traffic on 1900/tcp

Similar Messages

How to use non-standard port for vnc?

Our Windows users who use RDC to connect to their desktops from off-site come in on a non-standard port number. Part of our security setup.
I'd like to do the same with Mac users who use screen sharing and vnc to connect remotely.
How can I specify another port number at both ends to accomplish this?
I can find nothing in the Network Utility app, or in the KB.
Surely there's a short sequence of Terminal commands that will do this?

I haven't tried this so don't know whether it will work. But I think it will. Presuming the target machine is a Mac, see if editing its /etc/services file will do it. Find the two lines that start with "vnc-server" and change the port number there. Launch Terminal.app as an administratively privileged user, sudo pico /etc/services, ^w to search for vnc-server, make the changes, ^x to exit, y to save and overwrite. Also, you will need to have screen sharing enabled in the target machine's System Preferences' Sharing, and the authorized users defined there, too. Reboot. Now, on the remote client, assuming it is also a Mac, the user would type ⌘k in the Finder (or mouse to Finder > Go > Connect to Server), and enter something like vnc://123.45.67.89:55900 where you substitute the actual IP address or host name for where I have entered 123.45.67.89, and where you substitute the actual alternate port number where I have entered 55900. Of course, in the clients' Screen Sharing's Preferences, they should choose to encrypt the entire session, not just the login. Like I said, I haven't tried this because I just tunnel my vnc stuff through ssh, but I'm thinking that this should work.

How to use non-default Alias Table in Analyzer report

Hi,I defined many alias tables in Essbase. I would like to use a different alias table other than the "default" in Analyzer 6.5 report. In the on-line help, it said I can modify in "database connection properties" when first defining a new report to use a specific alias table. It tells me to do the following: Click the "New" toolbar button. Select a Display Type or Layout, and click OK. Right-click a database connection name in the "Select Database Connections" dialog box, and select Modify from the right-click menu.So I did this, but as I did the last-right click, there is no "Modify" option available. Only has "Add New..", "Database Connection Properties.." However, if I defined a new personal database connection using the login user, I can select to use other alias table. But this will go to personal database connection properties.Is it possible to specifically tell Analyzer to use other alias the global level in database connection? What I use to do is to have certain reports to use the default alias, and another to use another alias table. These reports should be able to share across all users.Sam

In deed it is fix in the GA.Another way to set the alias table is to do it in the Admin client. If you add a connexion to a user there is a new 6.5 button "set alias" that allow you to set the default alias table for this specific user. But, it does not exit on a user group level.

SSRS 2012 MP (Native) - Bug with non-default port on SSRS DB, Does not discover

We have test changing SSRS DB instance to default port 1433 and discovery is immediate in SSRS MP. When using non-default port, discovery fails, SSRS instance role is never identified.
Our SSRS is separated into app and db tires across two servers. Have tried creating sql network aliases, but this does not work either.
In our environment, we use non-default port for our SQL DB instances. how do we get SSRS to discover.
Thanks in advance,
Rois Cordova

The Monitoring Pack for Microsoft SQL Server 2012 Reporting Services automatically discovers instances of SSRS 2012 by reading registry.
When the Monitoring Pack for Microsoft SQL Server 2012 Reporting Services is imported for the first time, it creates three new Run As profiles:
• Microsoft SQL Server 2012 Reporting Services Discovery Run As Profile
• Microsoft SQL Server 2012 Reporting Services Monitoring Run As Profile
• Microsoft SQL Server 2012 Reporting Services SCOM SDK Discovery Run As Profile
By default, all discoveries, monitors and rules defined in the SQL Server 2012 Reporting Services management pack use accounts defined in the “Default Action Account”
Run As profile. If the default action account for a given system does not have the necessary permissions to discover or monitor the instance of SQL Server 2012 Reporting Services, then those systems can be bound to more specific credentials in the
“Microsoft SQL Server 2012 Reporting Services …” Run As profiles, which do have access.
It s recommend that you should check the default action account permission.
Roger

DISPATCHER : avoid change of a default PORT 1521

I have configured DB 10.1.0.3 with SHARED SERVER .
If I connnected to the database (SERVER=SHARED), dispatcher would use
non-default PORT as
"D001" established:5 refused:0 current:4 max:972 state:ready
DISPATCHER <machine: ............., pid: 19839>
(ADDRESS=(PROTOCOL=tcp)(HOST=..............)(PORT=35972))
I use my database behind the firewall in DMZ , so I want to use a default PORT 1521 with my dispatcher D0001.
There was an option "PORT" in a initialization parameter DISPATCHERS in previous DB versions. I cannot use this option in the database release 10.1.0.3.
Help me?

I'm afraid you can't do that, at least with that version.
See http://download-uk.oracle.com/docs/cd/A97329_03/core.902/a92171/concepts.htm#1016370
Here an extract :
The metadata repository is always configured to use port 1521 and has a service name of the form iasdb.host.domain (for the first infrastructure on a host) and iasdbx.host.domain for any subsequent infrastructures on that host). You should never change these values.

IdM doesn't support non-default port on mysql 4.1 as repository??

Hi
IdM doesn't support non-default port on mysql 4.1 as repository??
IdM version is 6.0.
I setup mysql 4.1 using non-default port 3307.
(default port is 3306)
During setup wizard,
the URL [jdbc:mysql://localhost:3307/waveset] doesn't work.
I am getting following error.
com.waveset.util.InternalError:
==> com.waveset.util.ConfigurationError:
==> com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
Of cource,
the URL [jdbc:mysql://localhost/waveset] works well
when I setup mysql using default port.

Hi,
it does work with non standard ports but whatever port you specify it will always try to connect to the default port before actually changing the repo setting.
Therefore use the switches -n -o $WSHOME/WEB-INF/ServerRepository.xml to write the new configuration without performing the broken checks.
Regards,
Patrick

How to establish user equvalance between 2 rac nodes on non default ports??

Hi Friends,
Please shed some light on how to establish user equvalance between 2 rac nodes on non default ports such as ssh on 22...
i want to establish user equvalance on other ports..
Thanks
RB

R12DBA wrote:
Hi Friends,
Please shed some light on how to establish user equvalance between 2 rac nodes on non default ports such as ssh on 22...
i want to establish user equvalance on other ports..
Thanks
RBHi RB ,
22 is default port for ssh. For configuring
http://yasarmoran.wordpress.com/2010/06/12/configuring-ssh-on-oracle-rac-nodes/
For non default port , first of all you need to configure ssh on new port . For that refer :
http://www.itworld.com/nls_unixssh0500506

TNS-12541 : Why use default port 1521 ?

Hi,
I just upgraded my base from 10.2.0.5 to 11.2.0.2.
I followed all steps from the SAP Marketplace : Upgrade to Oracle Database 11g Release 2 (11.2): UNIX
My database is upgraded and I need to perform post-upgrade tasks before updating my Client.
When I try to execute tnsping, i got this error :
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=TCP)(HOST=10.66.XX.XX)(PORT=1521)))
TNS-12541: TNS:no listener
I can't understand why he's trying to contact port 1521 while my tnsnames and listener.ora are :
TNSNAMES.ORA :
tnsnames.ora Network Configuration File: /oracle/ST1/112_64/network/admin/tnsnames.ora
Generated by Oracle configuration tools.
ST1.WORLD =
(DESCRIPTION =
    (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = ar3te017)(PORT = 1527))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ST1)
Filename......: tnsnames.ora
Created.......: created by SAP AG, R/3 Rel. >= 4.0A
Name..........:
Date..........:
LISTENER_ST1.WORLD =
(ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = ar3te017)(PORT = 1527))
LISTENER .ORA :
Filename......: listener.ora
Created.......: created by SAP AG, R/3 Rel. >= 4.0A
Name..........:
Date..........:
LISTENER =
(ADDRESS_LIST =
        (ADDRESS=
          (PROTOCOL=IPC)
          (KEY= ST1.WORLD)
        (ADDRESS=
          (PROTOCOL=IPC)
          (KEY= ST1)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = ar3te017)
          (PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SDU = 32768)
      (SID_NAME = ST1)
      (ORACLE_HOME = /oracle/ST1/112_64)
So why contact port 1521 insted of 1527 ? Did I forget a file to modify ?
Thanks

Hi,
Check below thread where similar problem was discussed:
ORA-12514: TNS:listener does not currently know of service requested ..
Thanks
Sunny

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

How to change the default port of webdispatcher

Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
Vadi

Hello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev

How to use a different port in RMI

Hi ,
We cannot use default port 1099 in RMI due to some restrictions. I want to user port: 8000 instead.
Can some one please help how to use a different port?
Thanks
Arun

C:\>rmiregistry.exe 8000
and in code use Naming.bind("rmi://<host>:8000", ....)
or LocateRegistry.getRegistry(host, 8000)
Genady

CSS 11501 ftp server setup problem using non-standard port

Dear Expert,
we would like to setup FTP server over CSS where our member sever use non-std-port to open both control/data channel (i.e. 6370 as ctrl and 6369 as data this case.) but seems we only get Passive mode FTP mode work only but not for Active mode FTP case for data channel establishement for server back to client...is there any professional advise can help on this case...? here is our setup info FYI
# sh ver
Version:               sg0820501 (08.20.5.01)
Flash (Locked):        08.10.1.06
Flash (Operational):   08.20.5.01
Type:                  PRIMARY
Licensed Cmd Set(s):   Standard Feature Set
                       Secure Management
CVDM Version:          cvdm-css-1.0_K9
!*************** Global
ftp data-channel-timeout 10
ftp non-standard-ports
!************************** SERVICE **************************
service ftp_ftpgtw
keepalive maxfailure 2
keepalive frequency 15
keepalive retryperiod 2
keepalive type tcp
ip address 192.168.52.170
protocol tcp
keepalive port 6370
port 6370
active
# sh run group drfusegtwftp_grp
!*************************** GROUP ***************************
group gtwftp_grp
vip address 192.168.52.28
add service ftp_ftpgtw
active
content ftp_gtwpkg-ftpgtw
    add service ftp_ftpgtw
    vip address 192.168.52.28
    port 21
    protocol tcp
    application ftp-control
    active

Thanks for your confirmation on no prob found in config level 1st..:P..as to save us a lot of time in isolating problem at this level.
What we can notice is seems the data port connection is fail to open for server back to client....for our general sense..... the flow expected should be:
TCP session A -- Client:1234 --> VIP:21 --> member svr:6370
TCP session B -- Client: 5678 <--> VIP:20 <--> member Svr: 6379 [on demand generated between server/client]
but we can only see session B fail to setup when client side access VIP site on CSS..even we try to put the most standard case as below
TCP session A -- Client:1234 --> VIP:21 --> member svr:21
TCP session B -- Client: 5678 <--> VIP:20 <--> member Svr: 20
we still unable to make the Active mode FTP access work either...hence we got no idea on how CSS handle FTP access when it involve services over multiple tcp ports..
and from CSS xlate view...the problem is we can only see what NAT IP that used in CSS connect to client...but no way to confirm for which port for VIP using outgoing to client. neither it is dropped by CSS..nor it is never setup from VIP to Client side.

Warning! DSPs 1 in slot 0 are using non-default firmware from device flash:

Hi,
Im having a problem on my 2801 router, my fxo and fxs port are not fucntioning, when i check the dsp it shows below; i have tried different ios still the same problems encountered.
rtr01#show voice dsp detailed
edsp 0001 01 g729r8 p 0.1 IDLE 50/0/1.1
edsp 0002 01 g729r8 p 0.1 IDLE 50/0/5.1
edsp 0003 01 g729r8 p 0.1 IDLE 50/0/6.1
Warning! DSPs 1 in slot 0 are using non-default firmware from device flash:
This is not recommended, the IOS default version is 24.3.0
----------------------------FLEX VOICE CARD 0 ------------------------------
                           *DSP VOICE CHANNELS*
CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
LEGEND     : (bad)bad    (shut)shutdown (dpend)download pending
DSP   DSP                 DSPWARE CURR BOOT                         PAK   TX/RX
TYPE NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ========= ========== ===== ======= === == ========= == ==== ============
C5510 001 01 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 02 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 03 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 04 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 05 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 06 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 07 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 08 None           0.0.0 bad   idle      0 0                 0          0/0
                           *DSP SIGNALING CHANNELS*
DSP   DSP                 DSPWARE CURR BOOT                         PAK   TX/RX
TYPE NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ========= ========== ===== ======= === == ========= == ==== ============
C5510 001 01 {flex}         0.0.0 free idle      0 0 0/0/0           0          0/0
C5510 001 02 {flex}         0.0.0 free idle      0 0 0/0/1           0          0/0
C5510 001 03 {flex}         0.0.0 free idle      0 0 0/2/0           0          0/0
C5510 001 04 {flex}         0.0.0 free idle      0 0 0/2/1           0          0/0
------------------------END OF FLEX VOICE CARD 0 ----------------------------
#sho voice port summary
                                           IN       OUT
PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
=============== == ============ ===== ==== ======== ======== ==
0/0/0           -- fxs-ls      up    dorm on-hook idle     y
0/0/1           -- fxs-ls      up    dorm on-hook idle     y
0/2/0           -- fxo-ls      up    dorm idle     on-hook y
0/2/1           -- fxo-ls      up    dorm idle     on-hook y
50/0/1          1      efxs     up    up   on-hook idle     y
50/0/5          1      efxs     up    up   on-hook idle     y
50/0/6          1      efxs     up    dorm on-hook idle     y
PWR FAILOVER PORT        PSTN FAILOVER PORT
=================        ==================
can somenone help to advice. th

Hi,
I see that the DSPware version says 0.0.0 and the current state shows "BAD" which should not be the case. Are you running 12.4(24)T IOS because i see that the default version of DSP should be 24.3.0 as printed in the output. By default the IOS itself contains the default DSPware in it but if it does not show up in your router, try reloading the router to see whether it fixes your issue. If not check the following link which lists the steps to be followed to install a new DSPware on your router.
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080a7af82.shtml
Hope that helps
Regards
Nitesh
PS:pl rate helpful posts

Cisco Archive - SCP non default port

Does anyone know the syntax of the path command when SCP is used with a non default port (other than 22)
THanks

Using that parameter, you are telling the database where to find the listener so it can register with that listener.
ALTER SYSTEM SET LOCAL_LISTENER='address portion of entry in tnsnames.ora'
In tnsnames.ora you have 'testdb', in listener.ora 'zalistener'
Edited by: Markus Waldorf on Sep 5, 2010 3:20 PM
Btw, you can have multiple listeners, but each must be on it's own port.

How to use a fixed port for remote assistance in windows 8.1 behind a nat router freebox?

Hello,
Before to use remote assistance in windows 8.1, i need to configure my nat router freebox.
But remote assistance ( msra.exe ) use a dynamique port and never the same.
How to use a fixed port for remote assistance ini windows 8.1 ?
And why i can't use easy connect ?
i read that the router must implement the PNRP protocol. I think it's a propriatary microsoft's protocol unknow on my router.
Thanks

Hello,
Very good. It's a big range ( 255 mini from 49152 ) for a single port but if it's the only one possibility...
You are very helpfull ( i don't know if it's a good english but you make me very happy )
Merci beaucoup

How to use non default port 1521 while 11.2.0.1 grid upgrade to 11.2.0.2

Similar Messages

Maybe you are looking for