How to use one app on two different devices so the info is the same...not having to start from level 1 again on new device

Hi there,
I have an app which I have recently achieved level 16 on (stored on ipod 4)...I have just purchased an iphone4s and would like to download the app to my iphone to play on there so I can play it anytime and not just at home when connected to wifi. When I downloaded it to my iphone it started me from level 1 again so I deleted it off and have tried several different ways to install the info syned from ipod without success...if this is not possible please advise...however I have been successfull with other games in having them show on both. I am afraid to delete it off itunes as it says it will delete it off the ipod when next synced.
Kind regards
Extremely frustrated individual
Amy

You're looking for something that's called a reverse web proxy.  That'll require some manual configuration within Apache, as it's not supported natively by Server.app tool.
The other option is to have your "primary" host just fetch and display the web data from the other host — nothing requires the contents of a web page all be from the local host, after all.
Another potential option is to configurre for and VPN into the network, and you can then access the network locally — this assumes you're the primary consumer of the reverse proxy, and not "the world".
Related here and here and probably a few others; remember that the configuration files in Mavericks are located under /Library/Server/Web now.

Similar Messages

  • Is it possible to move my iTunes from the old laptop to the new one (including all the music files and playlists) without having to start all over again with a blank iTunes?

    Is it possible to move my iTunes from the old laptop to the new one (including all the music files and playlists) without having to start all over again with a blank iTunes?

    yes
    You will need to copy the whole iTunes folder which is in your user profile on the old computer in Music folder.
    Before you do it make sure iTunes are updates on the old computer and it works without any problems.
    This will copy all your media, music, movies (provided you did not change the default location).
    After the migration you will need to sing in to Apple store again with your Apple ID
    and also authorize your new computer (both done from the tom menu bar in Store.
    Once you are done please deauthorize your old computer (the same menu path) if you are not planning to use it anymore.
    Any problems post here.

  • How to use ONE IPod on TWO Computers

    I have an Desktop-PC using ITunes 5.0 and an IPod 20 GB. When I connect my IPod with my Laptop, the complete IPod is deleting by the ITunes on the Laptop. How can I use ONE IPod on TWO Computers without deleting the music hole time?!

    I think you need to manually update on at least the computer that has the smaller music selection.
    it may be best to turn off automatic updates on both machines and manually add and delete songs.
    or you could network both computers to share one music library

  • How to split one monitor into two, differently configured desktops

    Hello,
    I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
    Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
    - one window/space on one side (say, on the left) of the screen would contain the document  from top to bottom, with no dock bar on the bottom
    - the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
    In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
    One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
    Is this possible? Can anyone recommend an application or type of setup?
    Thank you,
    -celso

    Looking for something like this?
    You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
    http://www.funk-isoft.com/index.php/display-maid

  • How to use one Datasource name with different pools

    Hi,
    I am using WLS 814 with 4 managed servers.
    Our application uses (Entity) EJBs with a defined datasource name.
    Each managed server should have its own connection pool pointing to a separate database.
    Now I want to deploy the same EAR on all servers.
    But how can I use the same datasource name across all servers?

    Frank Bareuther wrote:
    The DBMS is the same, we are only using a different database user to log on.
    There is a separate db user for each server.
    The EAR with a given datasource name in the entity EJBs should be deployed
    on all 4 servers without changing descriptors.Interesting. And what is the value of using a different schema/user in the
    different servers? I do believe that this configuration issue can be
    achieved but I have not done it myself. I believe there is a way to
    have some portions of a managed server's configuration by in a per-server
    config file. That would be where you would define the pool. The DataSource
    could also be there (with the same name for every server), or it could
    be in the common one in the admin server.
    I would file a support case to get this documented to show you how to
    do what you want.
    Joe

  • How to use one certificate for two directory servers?

    Hi,
    running Sun DSEE 6.3.1 on two servers, server 1 has name ds1.example.com, server 2 has name ds2.example.com. There is a round robin DNS record ds.example.com, which alternates between:
    ds1.example.com
    ds2.example.com
    and
    ds2.example.com
    ds1.example.com
    An LDAP client connects to one of the servers over SSL using the name ds.example.com. We want to generate a certificate using the name ds.example.com and use it on both directory servers.
    If we generate a CSR using DSCC on server 1 and get back a signed certificate, the certificate can be installed correctly on server 1. However, if we use the same signed certificate on server 2 it fails with error:
    Unable to find private key for this certificate.
    Failed to add the certificate.
    Error executing the operation. The error code is 11.
    What is the correct way to generate one CSR, have it signed by a CA and then implement this signed certificate on multiple servers?
    /rolf

    From one Directory Server (ds1) generate CSR with the name ds.example.com in the request. Once you get the signed cert import it into the same server you generated CSR with. Then from ds1.example.com :
    scp -p <slapd install/instance path>/alias/* <account>@ds2.example.com:<slapd install/instance path>/alias/
    to copy the contents of the alias path to the same location on the other Directory Server. Make sure file permissions are the same.

  • How to use a query in two different roles without copying it

    Hi,
    The report I try do should display only data that concerns only Controlling area (0co_area) of the user (there is need for two groups of users)).
    So far I created an authorization where I wrote down "0co_area = 1002" condition.
    then I created a role connected with that authorization.
    In that role I have a query with variable processing by authorization.
    Then I intend to create similiar authorization and role connected to it for users of 0co_area=1000.
    Now I think the only way is to create a copy of the query and copy it to the role for 0co_area=1000.
    The problem is that I dont wan't to have two querries instead of one.
    Any answers appreciated, 
    Regards, Leszek 

    Hi,
    After fixing the error in the role I noticed that all I should do is to publish the querry in a new role.
    From that moment a user that is tied to new role can read the old report using the rights associated in a new role.
    Thanks for help.
    Regards. Leszek

  • Use one agent for two different managment servers

    Hi ,
    Can one agent be connected to two different managment server in different domains ,
    or do i have to install two agents in the same server to connect to each managment server .
    thanks

    Can one agent be connected to two different managment server in different domains
    No
    do i have to install two agents in the same server to connect to each managment server Yes.

  • How to use one stream by two or more threads?

    Hey guys,
    i have got a little problem and do not know how to solve it. i hope you guys can are able to help me.
    i have opened a bluetooth socket connection. now i want to use these streams by three or more threads. one thread should only read from an input stream. the other threads are supposed to write on the ouput stream.
    (I think) I am only able to open one stream in each direction.
    How do I realize the use of the output stream by two indepent threads?
    thanks for your help!

    thank you for the hint!
    i will search it or do you know a good tutorial?

  • How to use one monitor with two Power Macs

    I searched this forum and was unable to find an answer. Although I believe it's probably here.
    Nevertheless, I have a Power Mac G5 and a rarely used Power Mac G3. I'd like to share the G5's VGA Accusync 120 CRT monitor with the G3. I know there is a way to switch the monitor between computers without pulling plugs in and out of the machines.
    Does anyone have any specific switch I could buy to solve this issue. I don't care so much for picture quality for the G3. But I don't want to compromise picture quality for the G5.

    You're looking for what's called a KVM (Keyboard, Video, Mouse) switch.
    This one should do what you're looking for. I've not used it, but it does VGA switching like you want and is inexpensive.

  • Using one PC for two different iphone

    My wife and I got the Iphone3GS recently. But, we just shared a PC at home. Are there any method to syn our materials on the same PC with different account?

    Yes. Just set-up separate user accounts on your PC, then setup iTunes in each account and sync as if it was on two separate PCs.

  • Can I use home sharing with two different Apple IDs?

    Can I use home sharing for two different Apple IDs?

    I have the same sort of problem I want to share two music liberys but my wife dos not like some of the music I do and I don't like some of her's but we like to share the music we both like.
    At the moment we have home shareing on but when my wife buy's music It downloads her's and my laptop and when I buy music it downloads to my laptop and my wife's.
    We want it so we can share music (home sharing) but only my music on my laptop and my wife's music on her laptop. 
    HOW?
    Sorry for the spelling I am dyslex.

  • Automatic Deployment Rule - One ADR for Two Different Collection for Two Different time Intervals

    I have a scenario where two collection of Windows 8.1 is made based on geographical location. One collection is for all the windows 8.1 machines in India and one collection is for all windows 8.1 machines in US. Now I have created one ADR to be deployed
    to the Collection for Machines in India with a schedule.
    My requirement is that can i use the same ADR for those two collection with different schedule. Say I want ADR to be deployed in India at say 10:PM IST and for US collection at say 10:00 PM PST.
    Can I use one ADR with two different schedule and can be deployed to two different collection. Any help will be greatly appreciated.
      

    Couple of "bits" to help you one your patch automation quest:
    A ADR is very much a 1:1:1 rule.  It creates (or updates) ONE update group, deploys it to ONE collection, and you can provide ONE schedule.  While you are more than capable of flipping said deployment time to use local time instead of UTC, in general
    it's a very simple set of rules that are dogmatically run.
    That said because of the "include" feature of collections it's not that hard to setup a good/robust patching pattern.  What I recommend doing is building an ADR for each variance of deployment of patches or enforcement time.  for example,
    my ADRs look something like this:
    Software Updates - Zero day enforced
    Software Updates - Critical and Security 1 month enforced
    Software Updates - Critical and Security 1 month no reboots
    Exact terminology is up to you of course, but I find a good descriptive ADR name saves a lot of confusion.  For each ADR I create an identical collection.  From there I can use existing collections and a simple "include collection" rule
    to bundle things up and make them part of the patching schedule of my choice.  Anyone can now go into my "software update" folder, look at my collections, and know exactly what gets patched by what deadline.
    Finally, don't be afraid to look into maintenance windows to trim down ADR count.  Making a deployment available for a month before it goes enforced, then setting up groups of maintenance windows (one for each Friday of the week for example) can also
    accomplish a similar goal by having machines auto-patch during their week but you only using one ADR.
    So by having two "types" of collections to manage your patching (one to assign a ADR built by deployment deadlines, the other for exact update windows) you should be able to group most your workstations into a decent patch scheudle without being
    too excessive about creating a billion ADRs.

  • How do I use Home Sharing with two different apple accounts?

    How do I use Home Sharing with two different apple accounts?

    Morning Saintine,
    Thanks for using Apple Support Communities.
    Home Sharing enables you to stream or transfer music, movies, TV shows, apps, and more among up to five authorized computers in your household. To do so, you will need to Turn on Home Sharing on each computer using the same Apple ID.
    Understanding Home Sharing
    http://support.apple.com/kb/HT3819
    Hope this helps,
    Mario

  • How to use one commandButton to execute two tasks in JSF

    I have a form in JSF page which contains different faces components. These faces bind to ADF BC to insert one row in the database when the user press commandButton. Also I need to bind the value of one inputText in that form to managed bean to execute another task in the application when the user press the same commandButton.
    The code of the inputText:
    <h:inputText value="#{bindings.ProjectNumber.inputValue}"
    id="pn"
    size="10"
    required="#{bindings.ProjectNumber.mandatory}">
    The code of commandButton:
    <h:commandButton actionListener="#{bindings.Commit.execute}"
    value="Save"
    disabled="#{bindings.Commit.actionEnabled}"/>
    The managed bean is �findInspector�. I tried to insert inputHidden inside commandButton tag and assign the value of the inputText to the inputHidden as follows:
    <h:commandButton actionListener="#{bindings.Commit.execute}"
    value="Save"
    disabled="#{bindings.Commit.actionEnabled}">
    <h:inputHidden value="#{bindings.ProjectNumber.inputValue}" binding="#{findInspector.project}"/>
    </h:commandButton>
    But it was not work
    Please how can I write the code to use the value of the inputText more than one time in the JSF(one to insert one row by using ADF BC and another to use the same value to bind to a managed bean) and how to use one commandButton to execute two tasks in JSF.
    Thank you
    Waheed

    Just dopublic void execute() {
        anotherAction(inputValue);
    I guess those articles might be interesting about passing params and the usage of inputHidden and also about using datatables:
    http://balusc.xs4all.nl/srv/dev-jep-com.html
    http://balusc.xs4all.nl/srv/dev-jep-dat.html

Maybe you are looking for