How to use opus codec in pjsip in ios ?

how to use opus codec in pjsip in ios ?

Hi Jay,
     Thanx for quick response,
     Do you mean to say that to use h264 or vp6 I have to make application in another technology/ using open source library as plugin.
     or we can directly use h264 in our application, as like we have option for two codec for audio in that, and just setting the codec property we were able to use.
Thanx in advance.

Similar Messages

How to use opus codec with pjsip library ?

how to use opus codec with pjsip library ?

Hi,
The pageDef in app B must have an entry for the method in order to access it. Just adding the adfjar isn't enough.
You need to go the bindings of the page in app B and add the method you want to access. Once the method is added you can access using the following code:
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("getWeatherbyCityName");
Map map =operationBinding.getParamsMap();
map.put("theCityName", "Tokyo");
operationBinding.execute();
This should work.
Thanks,
Siddharth.

How to use GPS with google maps in ios 6.01

How to use GPS with google maps in ios 6.01

Settings > Privacy > Location Services.
Make sure Safari is On.

How to use Youtube codecs when publishing in Premiere

Ok now I've never upgraded since CS3 because I didn't like CS4, but I want to make Youtube videos and Youtube RUINS the quality unless you are using their codecs.
Is there a way to customize my codecs to work well with Youtube? Someone elsewhere told me to download the 3.1 update and that didn't seem to do anything...

Youtube does not have their own codecs... but they will tell you which standard codec to use to upload to their site
YouTube Help http://www.google.com/support/youtube/
You then select an appropriate codec, and parameters, for your video
If you want to have a DIRECT link, look at Premiere Elements which has a way to directly upload to YT
http://forums.adobe.com/community/premiere_elements?view=discussions

How to use Siri with an IPad 2 iOS update to 7

Hello all, i would like to Know How to use Siri with my iPad 2. My iPad turn on iOS 7.0.2 and i don t view this possibiliy . Thank you all

Sorry, there's no Siri on iPad 2.
Siri is available on iPhone 4s or later, iPad with Retina display, iPad mini, and iPod touch (5th generation) and requires Internet access.

How to use Baskerville bold italic font in iOS?

So I want to use bold italic Baskerville. No matter what I do, it always shows up as regular in the device (without bold or italic). My code works fine on desktop.
I've tried using TextFormat class properties, which work for fonts like Georgia or Helvetica, but it doesn't for Baskerville.
textFormat.font = "Georgia";
textFormat.bold = true;
textFormat.italic = true;
I've also tried using the official iOS name of the font which is "Baskerville-BoldItalic" nothing.
I've listed all the fonts using this
var allFonts:Array = Font.enumerateFonts(true);
And it only lists the regular fonts, no bold or italic versions.
Any ideas on how to make Baskerville render in bold or/and italic?
TIA

Hello, here is the bug report https://bugbase.adobe.com/index.cfm?event=bug&id=3587210
BTW, I have tried embedding the font, and I got a new problem.... I've described my new problem in the flash forum and in StackOverflow.
http://forums.adobe.com/message/5457958#5457958
http://stackoverflow.com/questions/17356240/as3-font-embed-height-issue

How to use back to my mac from iOS?

I have enabled back to my mac on my macbook running ML and have enabled the same for my user ID in the airport express router to which the macbook pro is connected.
i would like t know how i can access the shared folder from my ios devices while
within the wifi network
outside the wifi network over the ios devices 3g internet.
tried a lot to figure it out since many months now.
Neerav

Just some additional info. For basic back to my mac to work you need a router (any brand) that supports UPNP or NAT-PMP - or an apple airport router device (Airport Extreme, Time Capsule or Airport Express) (which must be configured as your primary router - and not in "bridge" mode). You need at least two Macs - one in your house - and one as the remote device. You need to set up your iCloud id on both Macs and enable Back to My Mac in iCloud preferences - using the same icloud id for both Macs. You also need to ensure that you have enabled at least "Screen Sharing" in the sharing preferences of both Macs - and optionally enable File Sharing. You will see the Mac in the other Mac's shared pane - in Finder - both locally and remotely.
If you are using an Apple router (airport extreme, express or time capsule) - the icloud id's that you enter on airport device (via airport utility) - are only for the purpose of remote sharing of drives and printers attached to that airport device - and are not related to the back to my mac functionality. If you don't need to remote share the printers or drives directly attached to the airport device (via USB) - then you do not need to enter any iCloud id's on the airport device itself.
For example - you have a time capsule set up as a router. You have 3 people in your house that want to remotely access files on the Time Capsule's drive(s). You would enter your iCloud id, along with the iCloud id's of other household members. You would then all be able to independently share the time capsule drive remotely.
With an Airport Express router - you would only be able to share a USB printer attached to the Airport Express.
As for iPad - there may be 3rd party apps that would mimic the Back to My Mac functionality - but to the best of my knowledge there is no Apple-provided Back to My Mac app for the iPad.

How to use Mac *encrypted* screen sharing from iOS

Hello,
I have a Mac Mini running Yosemite Server that I can access from a remote Mac, using Screen Sharing app. I have selected "Encrypt all network data" and this works very well.
Now I'd like to do the same thing from my iPhone or iPad (both are running iOS 8): access my Mini in the same way I already do from the remote Mac. But I want my connection to be as secure. All data must be encrypted between the Mini and my iOS device.
What is the best way to achieve that? What are the best iOS apps? I've tried some VNC apps but they don't seem to manage encrypted sessions. Did I miss a subtle setting, either on my Mini or on the iOS apps?
Any help is truly appreciated.

Hello,
I have a Mac Mini running Yosemite Server that I can access from a remote Mac, using Screen Sharing app. I have selected "Encrypt all network data" and this works very well.
Now I'd like to do the same thing from my iPhone or iPad (both are running iOS 8): access my Mini in the same way I already do from the remote Mac. But I want my connection to be as secure. All data must be encrypted between the Mini and my iOS device.
What is the best way to achieve that? What are the best iOS apps? I've tried some VNC apps but they don't seem to manage encrypted sessions. Did I miss a subtle setting, either on my Mini or on the iOS apps?
Any help is truly appreciated.

How to use interactive quicktime movie on an ios device?

Hello in am exporting a lot of keynote presentation in quicktime format so they can be playedback on any computer running itunes and quicktime. But on ios there is no option to configure that format?
All ideas are welcome.

Hi Roger
SmoothSync is not free, but it's very cheap (£2:19)
Reminder synchronization is included
And there is a separate (also not free) module for Contacts.

How to use keynote remote w/ iPad and iPhone using Bluetooth

Using IOS 7.0.6 on iPad and iPhone can't get a connection via Bluetooth to use iPhone as a remote to control keynote on iPad. Bluetooth is on, remote is enabled in keynote on both devices but that is as far as I get. I'm looking for some instructions for what seems to be a simple process. Searched all over and only find outdated instructions or instructions that appear incomplete. I don't think my Wi-Fi connection at work will allow this type of connection that's why I want to use Bluetooth. I can't get the 2 devices to do this on my home Wi-Fi either. Using the latest update to keynote. iPad is work issued and not sure if it is iPad or iPad 2 but I don't think this would make a difference. Any help would be much appreciated. Very frustrated at this point.
Thank you,
Carl

Hey, I had some issues but I finally figured it out thanks to this article: http://www.cnet.com/how-to/how-to-use-keynote-to-control-keynote-on-ios-mac/
Basically, you find the remote (let's say your iPhone) while your iPad has a presentation active then go to Presentation Tools on said iPad and link your iPhone. Your iPhone has to be searching for a device after you tap "Add Device."

How to tell what codec has been used??

Hi
Just wondering how to tell what codec a particular video clip has been encoded in? I cannot see it anywhere in bridge. after fx dos it for some but not all clips.
cheers
angus

if you're using Loader to load the swfs, you could examine e.contentLoaderInfo.url to see which swf it is

New Opus codec support?

Will iTunes support playing or converting music to the new open source "Opus" codec? The codec has many advantages compared to AAC and MP3 and it is royalty free. It could be used easily in podcasts but also implemented in the iTunes store for better quality.
This shows comparisons of Opus against other audio standards http://www.opus-codec.org/comparison/
"Opus can handle a wide range of audio applications, including Voice over IP, videoconferencing, in-game chat, and even remote live music performances. It can scale from low bit-rate narrowband speech to very high quality stereo music. Supported features are:
Bit-rates from 6 kb/s to 510 kb/s ---That 's even lower than AAC or mp3 go and nearly 2x the max bitrates of each, it's nearly as good as lossless cd/DVD quality!--
Sampling rates from 8 kHz (narrowband) to 48 kHz (fullband)
Frame sizes from 2.5 ms to 60 ms
Support for both constant bit-rate (CBR) and variable bit-rate (VBR)
Audio bandwidth from narrowband to full-band
Support for speech and music --- can be used in podcasts and music--
Support for mono and stereo
Support for up to 255 channels (multistream frames)
Dynamically adjustable bitrate, audio bandwidth, and frame size
Good loss robustness and packet loss concealment (PLC)
Floating point and fixed-point implementation"
Here are some reference and news links:
Opus codec website:
http://www.opus-codec.org/
http://gigaom.com/2012/09/11/opus-audio-codec-ietf/
https://hacks.mozilla.org/2012/09/its-opus-it-rocks-and-now-its-an-audio-codec-s tandard/

Hopefully.
Opus does have formal industry standardization through IETF (http://tools.ietf.org/html/rfc6716).
According to IETF's new "mandatory-to-implement" idea, Opus would be required in the future for browsers supporting the WebRTC. It's not clear how effective the mandatory-to-implement directives will be, but if Apple goes along with it, Opus would probably wind up as a QuickTime component and available in a number of applications.
I highly doubt you'll see Apple selling or using Opus files however.

CS3 How to choose a Codec/extension wrapper and Preset for a project

Goal
To create fanvideos from commercial DVDs for personal fair use.
Potential to use to promote a series in a social media campaign with permission of owner.
Tools on Hand
Three seasons worth of the series ripped from commercial DVD --> .VOB format in TS Folders on my 2008 10.5.8 Mac using MacTheRipper
FFMpegx CODEC pack.
CS3 Premierie Pro with Mac updates that were posted on the Adobe site.
So far I've been able to
I managed to use ffmpegx to convert my .vobs into .mp4s, which I then renamed as .movs to get Premiere to recognize it. I managed to sync my audio with the mp4 encoder (may have been a H264 but not sure by changinge the frame-rate from ntsc film to ntsc.
Problems I've encountered
I had admittedly been experimenting with different codecs and .exts, trying to find optimum quality:size:premiere/iDVD compability, so I had a variety of source footage in my project. For some, I had to readjust the pixel aspect ratio. But when i rendered/exported the final product...everything was squished and incorrect. I had sound syncing issues for some of my trials, too. Before I was trying to make things compatable with iDVD. I no longer care about this and have no intention of burning anything with this project.
I saw things on the internet about using Encore's library of codecs, but couldn't find anything .dll on my computer. I also have no idea how to use any of hte CS3 support software (bridge, extension manager, after affects)
Current steps I'd like to take
I'm starting over and converting my .vob files into something Adobe will recognize (a simple file name change didn't work in this instance). I've read the different file types that Adobe PPro recognizes, but it's come to my attention that it prefers some file types to others. Which extension wrappers are the least likely to cause headaches when trying to edit in Pro?
Out of those possible codecs and extension wrappers that are compatible, which are the best for fitting a lot of quality into a small filesize? I heard good things about H264, but I don't know if the patch I dl'd will be enough to make it Adobe PrePro compatible (and I know there are a few different kinds of h264. the only one i had any success with at all put it an mp4 mpeg container, but didn't end up being anything of a filesize savings compared to the other h264, which ended up being useless). I have about 60 .vobs that are 2 GB big, and don't have an external hard drive yet, so this is a consideration.
How do I choose a preset for my new project? These DVDs were released over the course of 3 years, and they don't all have the same specs in their native format (when I grab the info from DVD player, it's different). Will I have better luck using different seasons if I convert them from .vobs to identical target file types? I guess the better question is, when using 3 different types of files that are wrapped into .vobs, am I better off customizing the target file to match the file information DVD Player gives me for each different season....or trying to find specs that serve all three seasons best and have more uniform files imported into Premiere? Eitherway, how do I know how to pick a Preset? I try keeping a 16:9 or 16:9 DVD in my target files, but does that make it a widescreen project to start? Once I start the project, is it too late to change these settings?
Thank you for helping a newbie. I tried looking around for answers to each problem as I came across them, but eventually I got overwhelmed and threw my hands up, deleting everything. I'm ready to ask for help and have a little patience.
*It's important for me to use free or very affordable 3rd party software, as I am currently unemployed.

You MAY want to think about a product that will read the output from your DVD player and convert to DV AVI
Matt with Grass Valley Canopus in their tech support department stated that the model
110 will suffice for most hobbyist. If a person has a lot of tapes that were played
often the tape stretches and the magnetic coding diminishes. If your goal is to encode
tapes in good shape buy the 110, if you will be encoding old tapes of poor quality buy
the model 300
Both the 110 and 300 are two way devices so you may output back to tape... if you don't
need that, look at the model 55
http://www.grassvalley.com/products/advc55 One Way Only to Computer
http://www.grassvalley.com/products/advc110 for good tapes, or
http://www.grassvalley.com/products/advc300 better with OLD tapes

How to use x264 with FCPX

I used the automatic installer for x264.
There were no instructions on how to use it with FCPX or compressor.
Can someone offer a tip?
Thanks
10.6.8
iMac 2009,1

Youn can't use it in FCP, only with Compressor. In Compressor make a new QuickTime preset or duplicate an Apple preset and change the codec to x264.

How to use XVID MEPG4 DECODER in labview

May i ask how to use Xvid MEPG4 Decoder to compress the AVI file. For this decoder have been installed in my computer but the VI(IMAQ AVI2 Get Codec Names)can not list this code name. So may i ask how can i use this decoder in the labview. For this decoder is relatively has good quality and also small size. Or what kind of other solution can be provieded for the relative small size of AVI file.
Thanks
Daniel

I believe this was answered already in a different thread: http://forums.ni.com/t5/LabVIEW/LabView-to-grab-and-save-video-to-mpeg/m-p/643864
www.movimed.com - Custom Imaging Solutions

How to use opus codec in pjsip in ios ?

Similar Messages

Maybe you are looking for