How to use OSD with Multiple DPs to remote locations

Hi
My SCCM 2012 R2 Primary site is located on my corporate office but i need to use OSD for multiple branch locations in different subnets.in My Organization there is network level DHCP server rather than Windows DHCP...
What would be the complete configuration in this case .. can some one provide the steps..
Shailendra Dev

Hi,
The best way to forward the PXE boot requests to the DP/PXE server is to use IP Helpers in the routers/switches. I assume that the branch locations are without a DP. You can use DHCP scope options in the DHCP servers as well but you will end up with problems
when PXE-booting machines that run UEFI becuase it is not the same bootfile used and it is not really supported.
Maybe standalone media could be an option where you have the most of the TS on a USB stick/Drive.
Regards,>
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

How to use ZendAMF with multiple services?

I followed Mihai Corlan's tutorial (http://corlan.org/2008/11/13/flex-and-php-remoting-with-zend-amf/) to create a remote service with Zend AMF, and it works great.
But, I can't figure out how to use multiple RemoteObjects. I keep getting the infamous:
faultCode:Client.Error.DeliveryInDoubt faultString:'Channel disconnected' faultDetail:'Channel disconnected
before an acknowledgement was received'
I set up my second RemoteObject the same way that I set up my first one. But, I can't get it to work.
Any suggestions? Has anyone seen examples of multiple services being used?
Thank you!
-Laxmidi

I made a stupid php error.
If you can do a single remote, you can do multiple ones. It's straightforward.
-Laxmidi

How to use iPhone with multiple computers on iTunes 11?

Both of my computers are Windows 7. I try to manage my music and videos on both iTunes. I used to be easy, like you just check the "Manually manage music and videos" square, and everything is fine... But after I update to iTunes 11, it just doesn't work. There is no resulting dialog box coming up where I can click "OK" after I checked square, and no matter I click "apply" below or "done" above, the iTunes asks to erase and sync with the iPhone. After it syncs, the "Manually manage music and videos" is checked. But if I move to another computer another iTunes, then it says I'm already syncing with one iTunes, and it needs to erase and sync with my iPhone again... and of course, the "Manually manage music and videos" is unchecked on this iTunes... If I try to check that on this one.. it's the same story happened before... Basically, there is just no way I can use one iPhone on two iTunes 11, is it?

Sync iPod/iPad/iPhone with two computers
Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entires and import the local content you have on that box.
tt2

How to use Count with Date Parameters

Hello,
I am having issues using the Count() function in conjunction with date parameters.
This is a Siebel report and in my report I have 2 date parameters(From Date, To Date). In a nutshell I am basically trying to count Opportunities that has a start date within the given date period. However I don't see a reasonable way to put my date parameters within the Count() function. The reason being is that I need to have a huge chunk of code to convert the dates into a common format that can be compared, and it won't even fit within the code block in my rtf template. I am not even sure how to put multiple conditional statements inside a Count() function since all the examples I have seen are very simple.
Anyone have a suggestion on how to use Count() with date parameters?
Thanks.

Any chance you can get the date formats in the correct format from siebel?
I don't know Siebel - so I can't help you with that. If you get the correct format it is just
<?count(row[(FromDate>=date) and (date<=ToDate))?>
Otherwise the approach would probably need to use string function to get year/monthd/day from the date
and store it into a varialbe and compare later the same way
<?variable@incontext:from; ....?>
<?variable@incontext:to; ...?>
<?count(row[($from>=date) and (date<=$to))?>
Potentially you can use the date functions such as xdofx:to_date to do the conversion
[http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481158.htm]
But I am not sure if they are available in your siebel implementation.
Hope that helps

How to use Terminal with KeySpan USB serial adaptor cable?

I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason Sjobeck

Hi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

How to use variables with

I need to get the number of lines in internal table, which would
be easy, using DESCRIBE TABLE itab LINES lines. But the problem
is, that I get the name of this internal table in the field of
another internal table, so I have to use the name of internal
table as variable, but I don't know how to use variables with
DESCRIBE TABLE (or if this is possible).

Hi,
REPORT ZPRUEBA782 .
define two tables with diferent structures.
data: begin of table1 occurs 0,
registro type i,
end of table1.
data: begin of table2 occurs 0,
registro type i,
repid like sy-repid,
end of table2.
data: rows type i.
start-of-selection.
fill them with data
do 1000 times.
table1-registro = sy-tabix.
append table1.
enddo.
do 1757 times.
table2-registro = sy-tabix.
table2-repid = sy-repid.
append table2.
enddo.
call a form that receives as input the table and returns the number
of rows as output.
perform howmanyrows tables table2 changing rows.
break-point. "evaluate the number of rows
perform howmanyrows tables table1 changing rows.
break-point. "evaluate the number of rows
end-of-selection.
form howmanyrows tables itable changing rows.
rows = 0.
loop at itable.
add 1 to rows.
endloop.
endform.
You can try it if you don't find a better solution.
Cheers,
Chaitanya.

How to Use Gmail With Apple's Mail?

Answer:
Now Itis not a Problem, Please go to this link and know how to solve this problem, Ihave configuir this in my mac pro. Have enjoy.
http://picturemuseum.blogspot.com/2011/08/how-to-use-gmail-with-apple-mail.html
http://mobilesuggestion.blogspot.com/2011/08/how-to-use-gmail-with-apples-mail.h tml

I notice that it's possible to have sticky posts in these forums. See
http://forum.java.sun.com/forum.jspa?forumID=534
the Concurrency forum for an example. Posting a link to the FAQ in a sticky post might reduce the number of FAQs asked here by maybe 1%? Or posts like this one might do well as a sticky?

How to use javap with jar files ?

how to use javap with jar files ?
thanks

As long as the jar is on the class path, your gold. So,
javap -classpath myjar.jar mypackage.MyClass
Chuck

Help me!! How to use JavaScript with JSP ??

I am using JDeveloper and I created a screen in JSP which uses a bean for database connectivity and retriving info onto the page.
The page has a ListBox where list items are populated from the database.My requirement is
whenever the list is changed the page shuold be refreshed with the selected item info.
I tried to use 'JavaScript' for triggering the event with 'onChange' event of the ListBox.But the event is not getting invoked. I think JavaScript is not working with JSP.
Please help me with how to Use javaScript with JSP or any other alternative where I can meet my requirement.
I have one more question...I have gone through the JSP samples in OTN and I am trying do download the sample 'Travel servlet' which show list of countries...etc
I have also gone through the 'readme' but I don't know how to extract .jar file.
I would be great if you could help me in this.
Thanks!!
Geeta
null

We have a similar need. We have used Cold Fusion to display data from Our Oracle Database. We have a simple SElect Box in HTML populated with the oracle data. When someone selects say the State of Pennsylvania. then we have an On change event that runs a Javascript to go get all the cities in Pennsylvania.
Proble we are having is that inorder for the Javascript to work , we currently have to send all the valid data.
Do you know of any way to dynamically query the the Oracle database in Javascript

How to use log4net with C# clients

Hi,
Can anybody please give an example of how to use log4net with C# clients? Foe java clients you can use the
<logging-config>
<destination>log4j</destination>
How do we use it with C# clients? Any example will be appreciated.
Thanks.
-ali

Ali,
The following is an example on how to define a custom logger (including log4net) in tangosol-coherence-override.xml for coherence .NET client; you need Coherence .NET client 3.7.1 patch 1.
<coherence xmlns="http://schemas.tangosol.com/coherence">
<logging-config>
<destination>common-logger</destination>
<logger-name>log4net</logger-name>
<severity-level>9</severity-level>
<message-format>(thread={thread}): {text}</message-format>
<character-limit>8192</character-limit>
</logging-config>
</coherence>
You also need to configure log4net in app.config. Please see the following web page for more information:
http://netcommon.sourceforge.net/docs/2.0.0/reference/html/ch01.html
-Luk

How to use assert with wireless toolkit?

Hi,
I am trying to find out how to use assert with wireless toolkit. I have found that I need to pass "-source 1.4" to the java compiler. But I can't find any documentation on how to do it.
I'm using J2ME Wireless Toolkit 2.2.
thanks
Ludde

Here's a quote from an article on Java World at http://www.javaworld.com/javaworld/jw-11-2001/jw-1109-assert.html
"To support the new assertion facility in J2SE 1.4, the Java platform adds the keyword assert to the language, an AssertionError class, and a few additional methods to java.lang.ClassLoader."
So I really think it's part of 1.4.

How to use setSoTimeOut() with socket ??

HI All!
I eagerly need to know how to use setSoTimeOut() with socket (on server side).
Actually the scenario is that My Server accepts connection and waits for connected client to send data to it. I WANT TO KEEP, IF CLIENT DOENS'T SENDS ANY DATA TO SERVER WITHIN 5 min. THEN SERVER MUST CLOSE THE CONNECTION, BUT IF SERVER RECEIVES STILL A BYTE FROM THE CLIENT WITHIN 5 mins., THE SERVER MUST RESET CHECKING TIME OUT FOR NEXT 5 MINUTES.
How can i do that??
Any help with example will be appreciated!!
Thanx in advance

you'd have to do something like this:
(this is all assuming you want to read Strings from the socket. setSoTimeout works for any read() call to the InputStream associated with the Socket)
ServerSocket ss = new ServerSocket(myPort);
Socket s = ss.accept();
s.setSoTimeout(5*60*1000); // 5 mins * 60 secs * 1000ms
BufferedReader in = new BufferedReader(new InputStreamReader(s.getInputStream()));
boolean running = true;
while(running)
try
String readIn = in.readLine();
// do whatever you want with the data read
catch(SocketTimeoutException)
running = false;
Now. That's what I think needs to be done. I don't have Java on the machine I'm currently on, so I can't test/verify it, but it goes something like that.
Good luck,
Radish21

How to use I18N with a custom validator?

This is my custom validator:
    public void validate(FacesContext context, UIComponent component, Object value) throws ValidatorException
        Pattern pat=Pattern.compile(".+@.+\\.[a-z]+");
        Matcher m= pat.matcher(value.toString());
        if(!m.find())
            FacesMessage message = new FacesMessage("Not a valid e-mail address");
            throw new ValidatorException(message);
    }Instead of providing the text "Not a valid e-mai address", I'd like to get the text out of my ApplicationResources property file.
How can I do this?
I know how to use it with the provided validators, but not with own custom ones
Please help me out, thanks

I found a solution for this problem, I don't know it's best practice but here it is :
    public void validate(FacesContext context, UIComponent component, Object value) throws ValidatorException
        String errortext;
        Pattern pat=Pattern.compile(".+@.+\\.[a-z]+");
        Matcher m= pat.matcher(value.toString());
        if(!m.find())
            ResourceBundle bundle =
            ResourceBundle.getBundle("be.vdab.resources.ApplicationResources", context.getViewRoot().getLocale());
            errortext = bundle.getString("erroremail");
            FacesMessage message = new FacesMessage(errortext);
            throw new ValidatorException(message);
    }

How to use x264 with FCPX

I used the automatic installer for x264.
There were no instructions on how to use it with FCPX or compressor.
Can someone offer a tip?
Thanks
10.6.8
iMac 2009,1

Youn can't use it in FCP, only with Compressor. In Compressor make a new QuickTime preset or duplicate an Apple preset and change the codec to x264.

How to use stylus with ipad2

Just bought a stylus for taking notes but do not know how to use it with the ipad2? Some special apps required?
Thanks!

Take a look at Memo, Penultimate, and Draw Pad to name a few. Several in the app store.But you do need an app that will accept input using a stylus or your finger rather than the keyboard. Several art/drawing programs are available as well.

How to use OSD with Multiple DPs to remote locations

Similar Messages

Maybe you are looking for