How to use parallels??????
My MBP originally has a windows system, I can press option to chose whether start Mac or Windows, But now, I'm using parallels, when i'm using it, i'v messed up, I'm wondering if i need to install windows again, can't I implement the windows I've installed
Yes, I realized that I formulated a wrong question...and probably in the wrong place. Pardon me for that. I humbly recognize that computers are not my strong, specially Macs. I was just looking for a little help because I bought a new Macbook Pro with Parallels and I'm able to print ok from the Mac's Lion but not from Windows; even though I did all the control panel normal procedures to install my printer.
Two short thoughts that have helped me alot in life and I would like to share today: "Not everyone that knows lives but everyones that lives knows" and "The tongue that heals is a tree of life but a devious tongue breaks the spirit". We should always be conscious that all acts of bigotry only leads us to death and try to prevent it to be part of our ways.
I appreciate for both for taking time to write. Wish you peace, well being and holly hapiness today and always.
Best regards;
Greatfultime
Similar Messages
-
How to use parallel flowed subforms begining at the same position.
How to use parallel flowed subforms begining at the same position in my form.
Ex
Subform1
Subform2
Subform3
DropDownList1
DropDownList1
DropDownList1
I would like to repeat with a button the 3 subforms in parallel
Subform1
Subform2
Subform3
DropDownList1
DropDownList1
DropDownList1
Subform1
Subform2
Subform3
DropDownList1
DropDownList1
DropDownList1Post your question in the LiveCycle Designer forum.
-
Hi
Any body help me to how to use parallel and add window8Follow the instructions from the Parallels User Guide here.
-
How to use parallel sequence for split the operation qty. urgent or other o
PP guru
My scenario is as follows.
I ve one material suppose xyz.
For that material I' ve created bom, routing.
In routing I' ve mention only one operation. 0010.
Now I' ve the production order of 1000 kg.
I want to use two work centers to run this production order. ( e.g.work center a and b)
In routing I used work center a.
In short I want split that operation.
So what I ve to do or use parallel sequence and how???
or else is there any other option to split the order to two or more machines/work center?
Pls explain me in brief.
Regards,
RamHi,
If you want to carry the production with two different work centers , first you need to split the operation qty.
For this in the order type dependent parameters OPL8
in the controlling tab page enable the indicator Cost collector
and set the default rule as PP2.
Create a Product cost collector with KKF6N.
Now in the production order , select the operation and choose functions--->>> split.
Now enter the operation split quantity and execute.
Now in MD04 you can see two production order.
In the second production order change the work center in the operation overview as desired and save.
Regards,
nandha -
How to use parallel sequence in capacity planning.
How we can use parallel seq in capacity planning?we have two machines which can be run parallel for production ,now how to distribute capacity load? suppose for the production of 100 km,we required 1000 min when it is produced through only one machine.Now if 2 machines are used simultaneously we required 500 min.How to see this in capacity planning?
Dear,
For calculating Available capacity you have options like minimum capacity, normal capacity and maximum capacity. You can select this option in work center-capacity tab for individual capacity category.
With parallel sequence and with both machines you can select maximum capacity option and plan your capacity.
Hope this is helpful.
Regards,
Prasad -
How to use Parallel Compilation -j using sun make?
Hello,
My c++ project have lots of cpp files and it takes around 5 - 5.5 hours to build the application which is definitely a lot of time. Little bit of googling landed me to the following sun link to reduce the build time.
http://developers.sun.com/solaris/articles/parallel_make.html
By using parallel make option of -j as it should reduce the build time considerably as i was using Solaris 9 on Sparc Sun-Fire-V440 which is having 4 CPU.
But on invoking make with a -j option i.e "make all -j 4" I get the following error :
make: Warning: Ignoring DistributedMake -j option
I even tried to use gcc make instead of sun(/usr/ccs/bin/make) make but none of them is actually helping me to reduce my build time.
Can some please guide me how should i go ahead withe usage of -j option on solaris.You should be aware that amount of parallelism that dmake can exploit depends fully on your Makefiles.
Unnecessary dependencies can significantly reduce amount of parallelism.
Recursive makefiles (make rules in turn calling makes) will hamper parallelism as well.
Hidden dependencies (those not directly specified in rules) will lead to spontaneous build failures.
It will take some discipline to write makefiles properly, but in a long term it will pay off.
regards,
__Fedor. -
How to use parallelism in RMAN script having multiple lines
Gurus,
Need your advice on using parallelism in 'BACKUP AS COPY DATAFILE' script having multiple lines.
I have a script like below:
CONFIGURE DEVICE TYPE DISK PARALLELISM 10;
backup as copy datafile '/data1/oradata/PROD/data01.dbf' format '+DATA';
backup as copy datafile '/data2/oradata/PROD/data02.dbf' format '+DATA';
backup as copy datafile '/data3/oradata/PROD/data03.dbf' format '+DATA';
backup as copy datafile '/data4/oradata/PROD/data04.dbf' format '+DATA'; and so on ......
If I run this script, it runs sequentially. How can I parallely copy the required data files ?
I have to selectively copy few files in ASM.
I want to use a single script.
Please advise.
Best regards,
Santosh
Edited by: 966454 on Oct 18, 2012 11:59 PM
Edited by: 966454 on Oct 18, 2012 11:59 PMUnfortunately, this will not help my case. It may not always be '+DATA'
I want to know if there is any way to parallelise the multiple statements.
Script may have :
CONFIGURE DEVICE TYPE DISK PARALLELISM 10;
backup as copy datafile '/data1/oradata/PROD/data01.dbf' format '+DATA1';
backup as copy datafile '/data2/oradata/PROD/data02.dbf' format '+DATA2';
backup as copy datafile '/data3/oradata/PROD/data03.dbf' format '+DATA3';
backup as copy datafile '/data4/oradata/PROD/data04.dbf' format '+DATA4'; ........
or
backup as copy datafile 1 as '/data1/oradata/PROD/data01.dbf' ;
backup as copy datafile 2 as '/data2/oradata/PROD/data02.dbf' ;
backup as copy datafile 3 as '/data3/oradata/PROD/data03.dbf' ; ........
Regards,
Santosh
Edited by: 966454 on Oct 19, 2012 12:33 AM -
Hi ,
I have created a Synchronous BPEL process where there is a flow where flow no is 3.
In each flow I have called separate web services, all calls are synchronous. In ws1 there is 10 sec sleep time, in ws2 there is no sleep and in last ws there is 25 sec sleep .
Even I have used <property name="nonBlockingInvoke">true</property> in bpel.xml but still it is not working, even it generates an error when I check from BPEL Console.
However when I not use <property name="nonBlockingInvoke">true</property> then it is working fine, but not parallel , one after another . Means after complete one call next call starts.
But I have to work all flow parallel, so that if there is any problems or sleep in any web service it doesn't effect others call.
Please help me in this regards as soon as possible.
Thanks
AngshuamanHi Angshuaman & Sunita,
You might be hitting the Bug : 8859449(unpublished) which is fixed in 10.1.3.4.0 MLR # 9 patch - 8589928.
FYI -
200001 : Instance #200001 of FlowN FlowN (v. 1.0) 1/16/10 5:21:26 PM
I've used the SOA_ORACLE_HOME\\bpel\samples\references\FlowN sample.
Regards
A -
How to use parallel dynamic block in guided procedures!!
hi
My application is as following i have to initiate a process from a webdynpro for java application and after that i have to send the action to the multiple users..
For that i created a parallel block inside that a sequential block and inside that an action .
In my wdj coding i created a variable user and assigned this parameter for the role of that action.
But the problem is it is not going to the multiple users.
pls suggest me if there is some other solutions to do this.....
Pls give me a solution it is urgently needed
With regards
Shanto Aloor
Edited by: Armin Reichert on Jun 18, 2008 12:11 PMHi,
Refer this
Regarding Parallel Dynamic Block -
hi
My application is as following i have to initiate a process from a webdynpro for java application and after that i have to send the action to the multiple users..
For that i created a parallel block inside that a sequential block and inside that an action .
In my wdj coding i created a variable user and assigned this parameter for the role of that action.
But the problem is it is not going to the multiple users.
pls suggest me if there is some other solutions to do this.....
Pls give me a solution it is urgently needed
With regards
Shanto AloorHi,
Refer this
Regarding Parallel Dynamic Block -
How to use parallel period function in olap universe?
Hi all
I want to create a ratio with the measure of the last year with the function parallel period in a universe olap. What is the syntaxis for do this ? ThanksHi Didier.
Thanks for reply
I have a olap universe and i create a new object with this sentence:
<EXPRESSION>ParallelPeriod([0CALMONTH].[LEVEL01],1,[0CALMONTH].CurrentMember,(@Select(Ratios\Salidas stk tot caj)))</EXPRESSION>
When run a query with Rich Client this error appears: (spanish)
Se produjo un error en la base de datos. El texto de error de la base de datos es: La consulta MDX WITH MEMBER [Measures].[D29E6BC1-5AC0-4245-86,DA,DB,41,D6,CF,B3,52] AS ' ParallelPeriod([0CALMONTH].[LEVEL01],1,[0CALMONTH].CurrentMember,([Measures].[4GPT8D1S01T3MR5EZ57C98LJC])) ' SELECT { [Measures].[D29E6BC1-5AC0-4245-86,DA,DB,41,D6,CF,B3,52] } ON COLUMNS , NON EMPTY CROSSJOIN( { [0PLANT].[0021] } , { [0CALMONTH].[201002] } ) ON ROWS FROM [ZIC_MP01/ZIC_Q01] no pudo ejecutarse con el error Error desconocido. (WIS 10901)
What is wrong ??
Thanks -
Wrong board, I know, but I don't know how to use Parallels...
Can someone walk me through installing Win XP on Parallels? The help menu doesn't, and I can't find a forum on their own site. Is it easier than it looks? The software looks so complicated to me.
Well… you wave this magic wand and…
Seriously though, it's easier than it looks. What you do is this…
1) Install it and register your serial number (even if it's a trial number).
2) At this point you should be confronted with a "Untitled Virtual Machine" window. Ignore it.
3) Select "New VM…" from the file menu and follow the Wizard that will guide your through the setup. Click Finish at the end of the Wizard.
4) Now, edit any of the paramters that you have such as memory by clicking on its Resource link else clicking on the Edit button. When you're done Save it.
5) You have now set up the virtual machine. All you now need to do is start it and you do this by clicking on the green Play button. You should now have a window that should look exactly like a PC with nothing setup.
6) Insert your Windows CD and install it like any other.
7) After installing Windows, go to the VM menu and select "Install Parallels Tools…". This will install some things that will make the experience better and also install drivers that will make it go smoother.
From there you're done. -
How To Use Parallels and EVDO Card at Same Time
For those of you trying to get Windows to access the internet via your EVDO card connected to your MacBook Pro, we have directions posted at:
http://www.evdoinfo.com/Tips/PC5220/MacBook_Sharing_EVDO_with_Parallels20061113849/
G5 Dual 2.5 GHZ, MaBook Pro Mac OS X (10.4.8)try this please
select* from mbr_account
where to_number(substr(to_char(member_number),-2) between 80 and 90 example
WITH DATA AS
(SELECT 52125150 A FROM DUAL UNION ALL
SELECT 521251581 A FROM DUAL UNION ALL
SELECT 521251582 A FROM DUAL UNION ALL
SELECT 521251583 A FROM DUAL UNION ALL
SELECT 521251584 A FROM DUAL UNION ALL
SELECT 521251585 A FROM DUAL )
SELECT A FROM DATA
where to_number(substr(to_char(A),-2)) between 80 and 83Edited by: Mahir M. Quluzade on Apr 21, 2011 9:26 AM -
How to use parrallel cursor in this code
hi can anyone expalin me how to use parallel cursor for this code ...
loop at itabkpf.
read table ibsegpar_fu with key
belnr = itabkpf-belnr
gjahr = itabkpf-gjahr
bschl = '25' .
Start insert by Pradeep 20082008
sort: itabkpf by belnr,
itabsegpar by belnr.
End insert by Pradeep 20082008
if sy-subrc = 0. "Deleted by pradeep 20082008
select bukrs belnr gjahr bschl koart lifnr wrbtr
wskto pswbt zfbdt augbl augdt sgtxt rebzg rebzj
into corresponding
fields of table ibsegpar_fu_1 from bseg
where bukrs = itabkpf-bukrs and
belnr = itabkpf-belnr and
gjahr = itabkpf-gjahr and
augbl <> itabkpf-belnr and
rebzg <> space and
bschl = '25'.
loop at ibsegpar_fu_1.
Start insert by Pradeep 20082008
sort ibsegpar_fu_1 by belnr.
End insert by Pradeep 20082008
move-corresponding ibsegpar_fu_1 to itabseg.
move ibsegpar_fu_1-belnr to itabseg-augbl.
move ibsegpar_fu_1-rebzg to itabseg-belnr.
move ibsegpar_fu_1-rebzj to itabseg-gjahr.
*********to include code to pick the description for partical payment
select single * from bseg where
bukrs = ibsegpar_fu_1-bukrs and
belnr = ibsegpar_fu_1-belnr and
gjahr = ibsegpar_fu_1-gjahr and
augbl <> ibsegpar_fu_1-belnr and
rebzg = space and
bschl <> '25'.
move bseg-sgtxt to itabseg-sgtxt.
clear bseg.
*********end of code
itabseg-wrbtr = itabseg-wrbtr * -1.
itabseg-pswbt = itabseg-pswbt * -1.
select single budat into lsdat from
bkpf where bukrs = ibsegpar_fu_1-bukrs and
belnr = ibsegpar_fu_1-rebzg and
gjahr = ibsegpar_fu_1-rebzj.
if sy-subrc = 0.
move lsdat to itabseg-zfbdt.
endif.
append itabseg.
endloop.
endif. "Deleted by Pradeep 20082008
endloop.
loop at ibsegpar_fu.
sort ibsegpar_fu by belnr. " insert by pradeep
move-corresponding ibsegpar_fu to itabseg.
select bukrs belnr gjahr bschl koart lifnr wrbtr
rebzg rebzj sgtxt into corresponding
fields of table ibsegpar_fu_1 from bseg
where bukrs = ibsegpar_fu-bukrs and
gjahr = ibsegpar_fu-gjahr and
augbl = ibsegpar_fu-belnr and " Pradeep 20082008 Delete
augbl <> ibsegpar_fu-belnr and " Pradeep 20082008 Insert
rebzg = space and
bschl = '25'.
if sy-subrc = 0.
loop at ibsegpar_fu_1.
move ibsegpar_fu_1-rebzg to itabseg-rebzg.
move ibsegpar_fu_1-rebzj to itabseg-rebzj.
endloop.
move ibsegpar_fu-belnr to itabseg-augbl.
move itabseg-rebzg to itabseg-belnr.
move itabseg-rebzj to itabseg-gjahr.
itabseg-wrbtr = itabseg-wrbtr * -1.
itabseg-pswbt = itabseg-pswbt * -1.
select single budat into lsdat from
bkpf where bukrs = ibsegpar_fu-bukrs and
belnr = itabseg-rebzj and
gjahr = itabseg-rebzj.
if sy-subrc = 0.
move lsdat to itabseg-zfbdt.
endif.
append itabseg.
read table itabseg with key
belnr = itabseg-rebzg
gjahr = itabseg-rebzj
bschl = '31' .
if sy-subrc = 0.
delete itabseg index sy-tabix. "Deleted by Pradeep 20082108
endif.
endif.
endloop.
Start insert by Pradeep 20082008
loop at itabseg.
if itabseg-belnr = itabseg-augbl.
delete itabseg.
elseif itabseg-belnr = ' '.
delete itabseg.
endif.
endloop.
End insert by Pradeep 20082008hi can anyone expalin me how to use parallel cursor for this code ...
loop at itabkpf.
read table ibsegpar_fu with key
belnr = itabkpf-belnr
gjahr = itabkpf-gjahr
bschl = '25' .
Start insert by Pradeep 20082008
sort: itabkpf by belnr,
itabsegpar by belnr.
End insert by Pradeep 20082008
if sy-subrc = 0. "Deleted by pradeep 20082008
select bukrs belnr gjahr bschl koart lifnr wrbtr
wskto pswbt zfbdt augbl augdt sgtxt rebzg rebzj
into corresponding
fields of table ibsegpar_fu_1 from bseg
where bukrs = itabkpf-bukrs and
belnr = itabkpf-belnr and
gjahr = itabkpf-gjahr and
augbl <> itabkpf-belnr and
rebzg <> space and
bschl = '25'.
loop at ibsegpar_fu_1.
Start insert by Pradeep 20082008
sort ibsegpar_fu_1 by belnr.
End insert by Pradeep 20082008
move-corresponding ibsegpar_fu_1 to itabseg.
move ibsegpar_fu_1-belnr to itabseg-augbl.
move ibsegpar_fu_1-rebzg to itabseg-belnr.
move ibsegpar_fu_1-rebzj to itabseg-gjahr.
*********to include code to pick the description for partical payment
select single * from bseg where
bukrs = ibsegpar_fu_1-bukrs and
belnr = ibsegpar_fu_1-belnr and
gjahr = ibsegpar_fu_1-gjahr and
augbl <> ibsegpar_fu_1-belnr and
rebzg = space and
bschl <> '25'.
move bseg-sgtxt to itabseg-sgtxt.
clear bseg.
*********end of code
itabseg-wrbtr = itabseg-wrbtr * -1.
itabseg-pswbt = itabseg-pswbt * -1.
select single budat into lsdat from
bkpf where bukrs = ibsegpar_fu_1-bukrs and
belnr = ibsegpar_fu_1-rebzg and
gjahr = ibsegpar_fu_1-rebzj.
if sy-subrc = 0.
move lsdat to itabseg-zfbdt.
endif.
append itabseg.
endloop.
endif. "Deleted by Pradeep 20082008
endloop.
loop at ibsegpar_fu.
sort ibsegpar_fu by belnr. " insert by pradeep
move-corresponding ibsegpar_fu to itabseg.
select bukrs belnr gjahr bschl koart lifnr wrbtr
rebzg rebzj sgtxt into corresponding
fields of table ibsegpar_fu_1 from bseg
where bukrs = ibsegpar_fu-bukrs and
gjahr = ibsegpar_fu-gjahr and
augbl = ibsegpar_fu-belnr and " Pradeep 20082008 Delete
augbl <> ibsegpar_fu-belnr and " Pradeep 20082008 Insert
rebzg = space and
bschl = '25'.
if sy-subrc = 0.
loop at ibsegpar_fu_1.
move ibsegpar_fu_1-rebzg to itabseg-rebzg.
move ibsegpar_fu_1-rebzj to itabseg-rebzj.
endloop.
move ibsegpar_fu-belnr to itabseg-augbl.
move itabseg-rebzg to itabseg-belnr.
move itabseg-rebzj to itabseg-gjahr.
itabseg-wrbtr = itabseg-wrbtr * -1.
itabseg-pswbt = itabseg-pswbt * -1.
select single budat into lsdat from
bkpf where bukrs = ibsegpar_fu-bukrs and
belnr = itabseg-rebzj and
gjahr = itabseg-rebzj.
if sy-subrc = 0.
move lsdat to itabseg-zfbdt.
endif.
append itabseg.
read table itabseg with key
belnr = itabseg-rebzg
gjahr = itabseg-rebzj
bschl = '31' .
if sy-subrc = 0.
delete itabseg index sy-tabix. "Deleted by Pradeep 20082108
endif.
endif.
endloop.
Start insert by Pradeep 20082008
loop at itabseg.
if itabseg-belnr = itabseg-augbl.
delete itabseg.
elseif itabseg-belnr = ' '.
delete itabseg.
endif.
endloop.
End insert by Pradeep 20082008 -
Virus Protection using Parallels?
Please excuse me if I have posted this in the wrong area. I am brand new to the world of Mac. I will be running MS XP under Parallels on my new MacBook for a few applications that have no Mac alternatives. I have read quite a bit that virus protection is not really necessary using OS X; my question is this: Will running XP on Parallels make my Mac vulnerable to more viruses? If it makes a difference, this computer will be on a network that has both Mac and PC users. Thanks.
Should you run AV software with Parallels? If you are running Windows in it, absolutely. When running WinXP in Parallels you are running Windows and are at risk for adware and malware.
Is your Mac at risk due to this? It can be but it need not be, that depends on how you use Parallels. Parallels creates a disk image and runs the virtualized installation from that disk image. Think of a big yard with a fenced in section. The yard is your Mac drive and the fenced in section is your Windows installation in Parallels. Without a gate, nothing can get it or out.
Note I said without a gate. Parallels has the option of letting Windows share Mac folders. This is a convenient way to share information between Mac and Windows and it constitutes a gate. I create websites using Mac tools but before uploading them, I need to verify that they look correct in MS Exploder 5, 6, and 7. So I share the WebSites folder I have my user directory with my Parallels WinXP installation allowing me to load my websites in my Windows browsers. That means Windows can read and write to that folder and constitutes a potential danger to my Mac installation.
So, use anti-malware software with Parallels? Yes. Worry that it might cause trouble for your Mac? A little. BTW, many ISP's offer free WIndows software. Check yours out.
Maybe you are looking for
-
HT1386 How do I move my iPhone backups etc from 1 Laptop to another?
Hello, I have my iPhone backed up on a crappy old laptop and want to move everything to my new laptop. How can i do this without a) having to wipe and re-sync my phone and b) without losing all my backup data from the old laptop. Thanks KT
-
Replication of a data source from multiple logical systems
Hi experts, In our ERP wie run many different clients with correspondong logical systems. When I'm changing a data source in ERP, then I have to replicate this datasource for each single logical system. My question : Is there a way to replicate a dat
-
Hi, when I run this query: SELECT a.*, d.C1 FROM t1 a, t2 b, t3 c, t4 d WHERE C2 IS NOT NULL AND C1 > '0005' AND a.C3 = b.C4 AND NOT EXISTS ( SELECT * FROM t5 WHERE C5 = C2 AND C6 = DECODE (b.C
-
Hello, I would like to set a background (link below) but the shape is not look good with repeat is there any way so the transition will be smooth or actually it's not possible with that kind of bacground img? http://wook.sytes.net/
-
Unable to send a Word document to iCloud to use it on my iPad wit iWorkd
All of a sudden, iCloud stopped working. I used it to send documents back and forth between my iPad and my PC. Today, when I tried to send the document I worked on yesterday to iCloud, it gives me an error message stating that "there was a problem se